Bootcamp and backing up HDD

Trying partion drive on early 2008 Macbook and the Bootcamp wants me to back up HDD then run assistant then reload the HDD? I have never done the bootcamp partition and i need help.
Thanks
Karl

Not compatible with CS3, though, as far as I know....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C3EB328E.2EFD33%[email protected]..
> if using windows, do a google for MM Exporter
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Similar Messages

Connecting and backing up external HDD to a Time Capsule

Hi All,
Running a Macbook pro Retina. I would like to do the following things with a Time Capsule:
Physically connect an external HDD to the time capsule, put media on this external HDD and access it wirelessly on my macbook
Use the time capsule to back up (via Time Machine) the data on both my macbook's HDD and the external HDD
I would be grateful for help with the following queries:
Will Time Machine allow me to back up both the internal HDD and external HDD that is connected to the time capsule?
Does the external HDD I attach to the time capsule need its own power source, or will it take its power from the time capsule via USB?
Does the time capsule need to be turned on 24/7? Or can it just be turned on when I need to perform a back up / access the information on the external HDD?
Thanks for your help in advance. I know some of these questions may seem obvious, but having seen contradictory information online I'd like to make sure of my ground.

Physically connect an external HDD to the time capsule, put media on this external HDD and access it wirelessly on my macbook
Technically, you could do this. The question is whether you should do this. The USB 2.0 port on the Time Capsule brings new meaning to word s-l-o-w, so copies and access are going to sluggish at best. The port operates at about half the speed of a USB port on a computer.
As far as locating media on the USB drive, you would not want to locate a "working" library there, as the experts in the iPhoto and Aperture forums strongly recommend against this, as well as Apple in their support documents. An iTunes Library is going to be really slow as well if you are thinking of that, and the library will tend to get lost, so you will wind up pointing iTunes to the library on a regular basis.
I've learned the hard way that it is much better to locate media on a drive that is directly attached to the Mac. Access is much faster and more reliable, and Time Machine can back up both the Mac and the attached hard drive.
Use the time capsule to back up (via Time Machine) the data on both my macbook's HDD and the external HDD
That is not possible, since Time Machine can only back up data on a Mac, or a drive that is connected directly to a Mac.
Will Time Machine allow me to back up both the internal HDD and external HDD that is connected to the time capsule?
No, see answer above.
Does the external HDD I attach to the time capsule need its own power source, or will it take its power from the time capsule via USB?
Use a powered USB hub with the hard drive unless the drive has its own power supply. Sometimes though, you still have to use a powered USB hub with a drive, even when the drive has its own power supply. You won't know if he drive will work until you try it out.
Does the time capsule need to be turned on 24/7? Or can it just be turned on when I need to perform a back up / access the information on the external HDD?
Apple designed the Time Capsule to be "always on" since there is not even an "Off" switch on the device. Network connections will remain a lot more stable if you leave the TC on. With Yosemite, the TC has a hard enough time not losing network connections. Forcing the TC to establish new connections every time that you power it off and back on is bound to create issues.

Hi i downloaded windows on my macbook pro without bootcamp and it deleted the mac portion of my laptop and i downloaded os x but my laptop started off with os x lion and i want os x lion back on my laptop what do i do

hi i downloaded windows on my macbook pro without bootcamp and it deleted the mac portion of my laptop and i downloaded os x but my laptop started off with os x lion and i want os x lion back on my laptop what do i do now?

timothymac123 wrote:
and i downloaded os x but my laptop started off with os x lion and i want os x lion back on my laptop what do i do now?
I'm confused. Are you saying that your mac came with an older version of OS X, but you want to be able to use OS X Lion, which you downloaded from the App store? If this is not the case, what do you mean by "I downloaded os x but my laptop started off with os x lion and i want os x lion back"? Specifically, what do you mean by "I downloaded OS X" if your mac came with Lion?

I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

Purchase and use Paragon Camp Tune

I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

I'm new to the Mac world. I installed my Epson printer on my IMAC and it worked fine. Then I installed Windows7 through Bootcamp and I think it reconfigured a port and now I get a communication error and it won't print. Any help on how do to fix this?

Sorry, I'm new to the Mac world. I recently got a new IMAC and installed my Epson CX5800F printer and it worked fine. Then a few weeks later I installed Windows7 through Bootcamp and I think it reconfigured a port or something and now I get a communication error and it won't print. Can anyone help me with this problem, and/or help me get the port back the way it was? Thanks, Barry

While looking through profile first aid, I came across this that might help explain my problem.
Searching for profiles...
Checking 20 profiles...
/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/Standard.profiles/Contents/Re sources/Epson IJ Printer.icc
   Tag 'desc': Tag size is not correct.
   Tag 'dmdd': Tag size is not correct.
   Tag 'desc': Description tag has a bad Macintosh string.
   Tag 'dmdd': Description tag has a bad Macintosh string.
   The file is locked. Could not be fixed.
Repair done - 0 out of 1 profiles fixed.

Can Bootcamp and Parallels share the same Windows applications and data?

I'm looking at getting an Intel iMac which will let me throw away my old PC - Yeah!
I will have a couple of Win apps that I will need to hang on to (Quicken - Quicken for Mac is horrible, but that's another tghread). Anyway, can Bootcamp and Parallels share the same Windows applications and data?
My thought would be to allow my wife to access Quicken from Parallels and not have to reboot. She will only need lightweight access and the overhead of running virtualization wouldn't impact her. I, on the other hand, would want to occasionally boot natively into Windows and run the same application with the same datafile. Is this possible?
Thanks and looking forward to joining the MacIntel world!

Thanks for all of the freplies. I suspected that BootCamp and Parallels could not shar ethe same partition, but wanted to verify. To address some of the other posts:
Re: Quicken vs MoneyDance - I looked at MoneyDance a while back and while it is comparable to Quicken for Mac, it isn't comparable to Quicken for Windows (ergo, Quicken for Mac isn't comparable to Quicken for Windows!). But, as I said, that is a topic for another thread!
Re: Using Bootcamp/Parallels for only one app: I actually have several apps that I still need access to on Windows. I work with many business applications than only run/are supported on Windows as well as receive some complex Office documents which Office for Mac cannot handle. Quicken (for Windows 2007) was just the best example of a consumer app where I could see wanting access from both OS X and Windows.

Bootcamp and windows 7 home premium

I am planning on installing windows 7 home premium with bootcamp for my macbook pro retina display (mid2012) OSX 10.8.2
The question is which version will work?
I have looked on amazon and there is the normal version that was 199.99 and they droped to around 160 something
Then i see plenty of other version of windows 7 home premium that say "system builder DVD 1 pack" or OEM version and they are only $95-ish
I know that i dont want to buy the windows 7 upgrade i just want to install the OS on my mac..... The upgrade and that "system buidler" are both under $100 which makes me think that they are something else then the disks to install windows 7 home premium on my mac.
Anyone know the differences?

I bought a Windows 7 home premium SP1 64-bit OEM software disk for $95. I installed it onto my MacBook Pro using bootcamp and the install worked perfectly without any problems. During the install process you'll need to type in the product key that comes with the Win 7 disk. After the install was complete I clicked on "Activate Windows via internet" and after a second a message came back saying that Windows is now activated.
As others have mentioned, my install of Win 7 OEM is now married to this specific computer. I cannot install this OEM version onto another computer. If you plan on replacing your mac in the near future buying the full retail version of Win 7 is a better bet since you can install the retail version onto a newer computer.
My MacBook Pro is brand new so I won't have a need to move the Win 7 to another computer. I hope this helps.

I recently tried to remove widows7 on my macbook air using bootcamp and halfway through it grayed out .The windows 7 is removed but i cant free up the 62gig partition the windows was occupying on my 121gig ssd harddrive please help

i recently tried to remove widows7 on my macbook air using bootcamp and halfway through it grayed out .The windows 7 is removed but i cant free up the 62gig partition the windows was occupying on my 121gig ssd harddrive please help

You may have to see about using the Recovery HD partition to attempt to erase and restore useful function of the capacity lost to the former Windows installation.
And you may have to backup your contents outside the computer to do it. Disk Utility on the Mac OS X historically has not been able to touch a BootCamp created partition; so if BootCamp cannot remove it, then you have to see how to do the equivalent of a reformat of the entire drive (less Recovery partition?) then reinstall your OS X. Maybe from internet recovery, then get your applications, etc from the Mac App store, etc.
A complete system clone of your OS X on an external HDD would be another method to restore after reformat, of the portion you want whole again, not necessarily the space where Recovery may live.
There may be (an)other way(s).
Perhaps someone with recent experience
in this matter can reply & discuss options.
With my antiques, they almost know what I want before I tell them.
Hopefully yours will after you talk to it awhile.
Good luck & happy computing!

Is it still impossible to do bootcamp and VMWare or Parallels?

I use bootcamp extensively to run several windows programs, mostly MS Office 2010. I also need to use Office 2011 so being able to switch back and forth between OS X and Win 7 is essential (I do this because I'm a consultant and curriculum developer--not because I'm a masochist). I've used bootcamp for years and it does a pretty good job once you get all the drivers issues sorted out.
I've also used VM ware, but had a couple of bad experiences where I lost my virtual machine and all the data on it. I do backups of course, but it was still really inconvient. Plus the driver situation when doing the virtual thing rather than bootcamp just wasn't quite there yet--another reason to use bootcamp. So for the past 2 - 3 years I've just been resigned to using bootcamp.
But occassionally it's just not convenient to reboot my system to switch from OS X to Windows, especially when all I want to do is check out some quick thing under windows but then quickly get back to Mac--two reboots! On the other hand, when I'm doing a windows client demo or such where failure's not an option, I'd want to be in bootcamp because it feels so much more solid.
I'm wondering if Apple or the virtual OS companies have made any changes that would allow me to have both bootcamp, which I'd use for windows in most situations, AND a virtual machine in OS X that I could use for quick trips to Windows but keep working in OS X without having to reboot. Most of my data files are on dropbox, so even if the bootcamp partition and the virutal machine disk were inaccessible to each other I'd be able to access the files I need.
If the answer is simply NO, you can have bootcamp or virtural machines but not both, then my next question is this: Is either VMware or parallels getting close to being as robust as bootcamp for running windows, or should I just plan to keep on bootin' for another few years?

Hey Bob,
Thanks for the information. My last experience was with VMWare 1 and I don't think this functionality was available then. I downloaded today version 4 and at this point I am running Win 7 within MacOS. Haven't tried rebooting to my bootcamp partition yet or printing or sharing, etc. If it works as advertised though I should be a happy camper.
The import option doesn't strike me as a good one for my situation. I have 500GB on my MBP and 120 GB allocated to my windows bootcamp partition. If I do the import option with VMWare I'd basically need another 120 GB of the total space and then I'd have two unsynchronized windows disks, one under bootcamp and the other under VMWare.
Running VMWare as a Mac application I can see it's a bit slower than running in bootcamp, but I expected that.
This is exciting stuff and I appreciate you taking the time to enlighten me.
Thanks

Can I use bootcamp and install Windows 7 on an external Thunderbolt drive

Hello,
I want to know if it is possible to install windows 7 on a thunderbolt external hard. I have a limited space on my harddrive and want to have windows 7 operate and store data on the thunderbolt drive.
Anyone know if this works or if its possible.
Thanks

i use a thunderbolt ssd for my boot disc and it appears that bootcamp appears to start ok. in disk utility i can partition the drive successfully so i would be really interested if this would work. personally i cant see any problems.
are you thinking about formating the drive and installing windows without bootcamp? that will definately not work!
however with bootcamp you stand a very good chance of achieving your wish. please keep us posted if you decide to do this.
i know of one way that can absolutely do it, but it means installing osx on your ext. first. i have vmware on my ext. running win 8.1 works seamlessly.
i run bootcamp from my internal hdd with win 7.

PLease advise on increasing the speed of my iMac 2008. It is running slowly and accesses the HDD a lot. Perhaps re-installation? Thanks.

I need to increase the speed of my iMac late 2008 (3.06GHz Intel Core 2 Duo). It has 4G of DDR2 SDRAM and a 500G HDD.
I back this up regularly with time machine.
If a fresh installation is advised, how do I do this?
Thanks

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Bootcamp and VMWare Fusion

I am confused about Bootcamp and Fusion. I installed XP to Bootcamp. Then I installed Fusion and installed XP there (it has been a while and I have forgotten the details). I always run XP from Fusion. It works fine. Recently I decided to boot into XP directly. When XP came up it told me it wasn't activated. So I went back to OS X and then Fusion.
1) Do I have two separate XP installations? Or just two different entry points to the same installation?
2) If I have two installations can I just delete the Bootcamp partition?
3) How would I go about activating the Bootcamp XP installation?
Thank you

If you want, there is Fusion VMware forum. But, you didn't tell Fusion to use the Boot Camp copy/version so while you could have shared one activation key for both, you can't have two separate the way you do now.
If you are happy with Fusion and don't really need the other (better for gaming and more hardware intensive programs) then use Boot Camp Assistant and regain back the partition, don't remove the partition with Disk Utility.

Bootcamp and Time

After using windows in bootcamp and I return back to my mac desktop, the time is always 9 hours or so behind what it actually is, even though while in windows it's correct and before going in to windows from the mac side it's correct. Is there a setting I can use so that the mac resets the time properly after exiting out of bootcamp? Thanks.

I would really like to see a solution to this. Most of the posted "solutions" revolve around having the system connect to a time service. This is not a solution.
It is just totally inappropriate for a system clock to be reset like this all the time. Too much software relies on various timestamps to work properly and something critical is going to get overwritten somewhere sooner or later.
I would like to hear why it happens from someone in the know. I am guessing that Mac and PC read some system integer and interpret it differently, so it needs to happen very early in the boot process.

How can I uninstall Bootcamp and Recover the partition for the Mac HD

How can I uninstall Bootcamp and recover the partition for the IMac HD?

Boot into OSX. Go back into the Bootcamp utility in the Utilities folder and re-run it. It will give you the option to remove the Windows partition and make the OSX partition fill the whole drive again. OSX will NOT be lost in the process. No re-installing necessary. Only takes a few minutes or less to complete.

Bootcamp and backing up HDD

Similar Messages

Maybe you are looking for