Bootcamp and Windows 8. bug

Hello,
I have a problem now with Bootcamp on Microsoft Windows 8.1.
- My hot keys for backlight access keys do not work. (Cursor blistered)
- The Quick Access brightness button works but nothing changes.
- Going through Windows menus, you can not adjust the brightness, if I decrease or increase, nothing happens.
- If I switch to battery mode, the brightness does not change.
- I turned off the automatic brightness adjustment, but it changes nothing.
- I have the impression that the battery management is not as well managed from Windows 8.1 over Windows 8.
Do you think that update Bootcamp will happen to address these issues? Do you have an alternative solution for the brightness and the backlight?
Thanking you

currently the latests bootcamp drivers don't officially support win8.1 only win8 so driver issues and absent features is to be expected
when they begin to officially support 8.1 you can just download the zip file and run the setup.exe to get the latests drivers

Similar Messages

  • How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

    How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

    Have a look at solutions in here https://discussions.apple.com/message/10689317#10689317
    Regards
    Stefan

  • Preparation for installing bootcamp and windows 7, and in the absence of a DVD drive

    I am not sure that I submitted this with the right boxes ticked, so i am re submitting it!
    In preparation for installing bootcamp and windows 7, and in the absence of a DVD drive on my MacBook Air, before starting, can I partition my external drive (for use with my Mac) to have an ISO image file location for Windows downloads? 
    Cyfromayo

    The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
    The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

  • 802.11n with Bootcamp and Windows xp

    My 13 inch Macbook connects to my airport network at 802.11n 5GHz dual bandwidth using OSX but only 802.11g works when using bootcamp and windows. My 802.11n network shows-up on windows as an available network and I can type in my network password but it won't make the connection. Is 802.11n automatically active with bootcamp? I am able to connect at 802.11n speeds to my network using my work's Window laptop and a Linksys 802.11n usb card so I know it works.

    Boot Camp forum.
    https://discussions.apple.com/community/windows_software/boot_camp

  • ITunes 10.4 and Windows 7 bug thread

    I thought I would start an entire thread devoted to iTunes 10.4 and Windows 7 bugs since there are MANY people reporting various issues and may not know about all of them. Hopefully this will combine a list of all bugs for reference and help others. So far, most of this effects Windows 7 64 bit, but some are reporting issues under 32 bit too.
    I have spoken with both Apple Care and a higher level tech at iTunes support. The iTunes support tech said they were "looking into all reported bugs and are aware of issues with version 10.4, especially under Windows 7. They encourage others to report their bugs to iTunes support so they can work on this and find all the issues.
    KNOWN BUGS:
    Album Art copy/paste broken - A bug that causes copy/pase from clipboard where album art is not displayed in the info tab as before. Some have reported success by dragging the image file over to it vs copy/paste method but it is still very much spotty and a known bug.
    iTunes store not working - Some have been effected with the iTunes store not working properly for them. Personally I don't have a problem but this has been for some.
    "Purchases" link not working in iTunes - When you click on "Purchases" link on the right column, all your purchases are missing and do not show up. This includes, music, movies, apps, etc. This is also a known bug and one that I have personally. Works fine in iTunes 10.3 for Windows 7 64bit and also works fine under both Snow Leopard and Lion OS.
    Sync issues - Some have reported syncing issues since upgrading to 10.4 iTunes on Windows 7. This is a bit spotty as well as I have no trouble but there are others that have reported issues.
    Solutions:
    For now, the only way to fix this is to use iTunes 10.4 under Snow Leopard or Lion OS. Also, you can uninstall (not repair) 10.4 and install 10.3 again which should work.

    You are correct and I wish that I had known this before spending 4 days and a lot of trouble going over this with both Apple Care and iTunes support. They had me jumping through hoops and didn't know anything until it was finally escalated. Only then did I get a vague response like I mentioned in the first post. It's troubling to me how a simple response from anyone there could've just said we know about this and they are bugs in 10.4 causing this.
    There are other issues too as you point out with the syncing and crashing. Anyway, hopefully others will find information here more useful than calling Apple for help. Not much we can do now except roll back to 10.3 for those that kept it and hope also they can updated Apple Application Support component.

  • Can I run a windows software program taht is on a CD on my macbook pro after I install bootcamp and windows xp home?

    Can I run a windows software program that is on a CD on my macbook pro after I install bootcamp and windows xp home?

    genepaquin,
    the last MacBook Pros that supported installing Windows XP in a Boot Camp partition are the Mid 2010 models. If your MacBook Pro is newer than that, and you don’t have a newer version of Windows to install into a Boot Camp partition on your MacBook Pro, then you might consider an alternative such as running Windows with the help of programs such as VirtualBox or Parallels Desktop rather than through Boot Camp.

  • Am I reading the absence of response of preparation for installing bootcamp and windows 7 correctly?

    Hi,
    Am I reading the absence of response on "preparation for installing bootcamp and windows 7", correctly?,
    There is a number of BOOTCAMP problems? which have no successful outcome yet?

    Pete
    I think that I should have said, Am I reading into the absense of response correctly, (after failed attempts to get a response) on the BOOTCAMP preparation issue.
    there is no Link that I can find solutons on, just a number of questions in the MORE LIKE THIS frame.
    Cy

  • Bootcamp and windows 8(partition problem)

    I am trying to install windows 8 and until now with no sucess. The instalation by the bootcamp runs smoothly, but when I boot from the USB, start the instalation process on windows and it asks me what partition I want to install the windows, I try to choose the Partition 4: BOOTCAMP and it doesn't work. It says it's a problem because the partition is EFI and for installing windows it can't be or something like that
    And if I don't press the Alt button, when the bootcamp finishes the instalation and reboot the mac, it goes to a black screen where said that I don't have any boot devices connected and to connect one and press a key.

    I believe you are supposed to format the partition labeled BOOTCAMP to NTFS from the installer. It is stated in the BootCamp suport guide.

  • Brightness with bootcamp and windows 8.1 on rMBP 13 2013

    Hi,
    I've googled for this issue and i've found many potential solves of my problem:
    - Turning off adaptive brightness
    - disabling Light sensor in Device Manager
    - deleting SensorsAlsDriver.dll
    Nothing works. I'm actually using Win 8.1 Pro N x64 with installed Media Feature Pack and with the newset updates. It is fresh-installed via bootcamp manager.
    After sleeping and waking up my Mac brightness buttons magically start working!
    What do I suspect?
    When i delete SensorsAlsDriver.dll and uninstall Proximity sensor in Device Manager, after reboot Windows re-installs the sensor, and re-apply the .dll file.
    I dont have an idea how to prevent OS from doing it...and I think it is potential solution.
    Could someone help me solving this problem?

    I've been experiencing this same issue. I have the exact same laptop and running windows 8.1 pro through bootcamp. Everything runs great except the brightness doesn't seem to work properly. Also the keyboard's backlight is maxed out everytime i turn it on no matter what the lighting conditions. This isn't too big of a deal as i can turn it down once its on but still a minor inconvenience. My bigger issue is that the laptop's brightness is set to a certain level when i boot up in windows 8.1 and i can't change the level of it. I've tried disabling the adaptive brightness with no fix. I read somewhere that disabling the generic PnP monitor under device manager might fix it but im worried that it will disable my laptop's screen altogether and have to redo my bootcamp partition all over again. I have the latest bootcamp drivers for apple that were updated in early feb (2014) so I know that's not the issue and i have also tried reinstalling the bootcamp drivers but it just seems to do it again after a reboot. Dont' know any other fixes. I really want to get this working, other than that, bootcamp on windows 8.1 is perfect on my 13 retina pro.

  • Bootcamp and windows 7 home premium

    I am planning on installing windows 7 home premium with bootcamp for my macbook pro retina display (mid2012) OSX 10.8.2
    The question is which version will work?
    I have looked on amazon and there is the normal version that was 199.99 and they droped to around 160 something
    Then i see plenty of other version of windows 7 home premium that say "system builder DVD 1 pack" or OEM version and they are only $95-ish
    I know that i dont want to buy the windows 7 upgrade i just want to install the OS on my mac..... The upgrade and that "system buidler" are both under $100 which makes me think that they are something else then the disks to install windows 7 home premium on my mac.
    Anyone know the differences?

    I bought a Windows 7 home premium SP1 64-bit OEM software disk for $95.  I installed it onto my MacBook Pro using bootcamp and the install worked perfectly without any problems. During the install process you'll need to type in the product key that comes with the Win 7 disk. After the install was complete I clicked on "Activate Windows via internet" and after a second a message came back saying that Windows is now activated.
    As others have mentioned, my install of Win 7 OEM is now married to this specific computer. I cannot install this OEM version onto another computer.  If you plan on replacing your mac in the near future buying the full retail version of Win 7 is a better bet since you can install the retail version onto a newer computer.
    My MacBook Pro is brand new so I won't have a need to move the Win 7 to another computer. I hope this helps.

  • Bootcamp and WIndows 7 doesn't work

    Hi,
    well I'm kinda freaking out. Since I installed a SSD myself into my Imac 21,5 inch, I had to replace the optical drive with the SSD. So now I had the prblem that I wasn't able to install Win 7 via Bootcamp since it doesn't support external DVD-Drives. After trying every solution provided on the internet I decided to open the Imac again, reinstall the optical drive, install windows 7 and replace the optical drive again. When installing Win 7 there was no problem, it booted and all worked fine. So I installed the bootcamp drivers for Win 7 and so on. And then, after reinstalling the SSD, Win suddenly was unable to boot. I get nothing but a black screen with a white blinking "_". I thought what the .... and came to the conclusion something went wrong. But before freaking out I had the idea to try VMware. After clicking on Bootcamp and clicking on start, it all worked. I was able to boot into Win 7, install updates and so on. So I guess nothings wrong with the installation. But what is it then? I can't figure it out and I would really hate  hate if I had to reopen my Imac because it really *****...
    Well If anyone's able to come up with I solution I would really appreciate it!
    Thx in advance
    David
    PS: All drivers are up to date!

    I've been trying for a day and a half to get it to work on my 27". Ive swopped the superdrive for an SSD too.
    I didn't realise that you couldn't install it from an external drive so i'll stop wasting my time with that one.
    For the record I've tried to,
    Make a bootable USB stick drive - didn't work
    Make a bootable Hard Drive - didn't work
    I'm going to swop the HD for the optical drive and try to install it on to the SSD. Then i'll take the CD drive out and replace the Hard drive. See how that goes!
    I'll keep you updated...
    David... Did you sort your problem? if so how?
    Thanks
    Lee

  • Bootcamp  and Windows Updates

    Hello,
    I am new to Bootcamp and have Windows 7.0 Basic edition loaded on a partition and everything works just fine. There is an issue which I don't know if there is a workaround for.
    The default boot is OSX, and I usually get to Bootcamp by restarting the computer. And occasionally it looks like Windows wants to update and eventually restart the computer.
    Problem is that if you forget about OSx being your default boot and miss pressing that Option key while Mac is coming up then you wind up havving to restart again.
    Isn't there a way for the system to know that it is restarting to take care of an update and temporarily go directly to the os that requested the restart?
    Thanks
    Farzad

    Install. Though might want to check on Intel graphics, you can always rollback. Also system restore check points. And make a restore system image at some point too.
    you want and you need the "patch Tuesday" each month.
    And you need a good security program of course, whether MS Security Essentials or something else.

  • Webcam on 2008 Mac Pro with Bootcamp and Windows 7.  Cannot get it to work.

    Have windows 7 Professional on my mac, using Bootcamp
    I cannot get any webcam to work.
    So far, I have used ....
    A Logitech QuickCam Vision Pro for Mac. No app can detect it.
    A Logitech C510 Webcam (for PC) No app can detect it.
    An Agama V-2025 Webcam (for both Mac & PC and supposedly no additional drivers needed). No app can detect it.
    I called Logitech and they said as it was too complicated for them to support, (i.e. Windows on a mac with bootcamp) and so they couldn't help.
    Any ideas would be most appreciated.
    Thanks.

    Use bootcamp. I have been a loyal Adobe guy for 12+ years, but now that I have upgraded to mac...Adobe just sucks. I have not been able to finish a project yet do to the shabby CS4 media encoder.

  • Question on using bootcamp and windows on 15" macbook pro retina (late 2013)

    So i just bought a new macbook pro 15" retina (late 2013) and i want to play games on it like LOL, WOW, and SC2. i was wondering if i really need to play them on bootcamp using windows 7.

    Open Boot Camp Assistant (in Utilities) print out the instructions, setup Windows on its own partition, insall and run Windows natively, not much difference than on any laptop.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Forum that is devoted to Windows Boot Camp:
    https://discussions.apple.com/community/windows_software/boot_camp

  • Help with Graphics on bootcamp and Windows 7...

    So, i installed windows 7 home premium 64bit via bootcamp on my mac.  I'm playing RIFT, and honestly, on medium graphics I'm getting poor fps (14 at best) and over all the graphics seem lower quality than I feel they should.  My question is, is it possible I need to install new drivers for my video card? According to Windows 7 they are up to date, but i'm confused as to if this is truly correct as its bootcamp, and this is my first experience with it so I may be missing something.  Any help would be appreciated!
      Chipset Model:    ATI Radeon HD 5670
      Type:    GPU
      Bus:    PCIe
      PCIe Lane Width:    x16
      VRAM (Total):    512 MB
      Vendor:    ATI (0x1002)
      Device ID:    0x68c0
      Revision ID:    0x0000
      ROM Revision:    113-B9850H-133
      EFI Driver Version:    01.00.416
      Displays:
    iMac:
      Resolution:    1920 x 1080
      Pixel Depth:    32-Bit Color (ARGB8888)
      Main Display:    Yes
      Mirror:    Off
      Online:    Yes
      Built-In:    Yes
      Connection Type:    DisplayPort
    Display Connector:
      Status:    No Display Connected

    You can download the latest drivers at amd.com by going to Support & Drivers, MAC Graphics, Apple Boot Camp, iMac, Windows 7-64 bit.
    You can also use the Mobility Radeon HD 5xxx drivers (iMac's use notebook GPU's) which are slightly newer, but I haven't noticed a difference in performance.

Maybe you are looking for

  • Why can't I save pdf files in Safari 5.1.2

    Up to now it hasn't bothered me much, but today I wanted to download iBank 4 Quick Start Guide. When I clicked on the link for the guide, Safari went to a pdf page and displayed the first page of the pdf. When I selected "Save As" it gave me a name f

  • RAM on nokia lumia 800, 512 or 363 mb???

    Hi, I've bought a new Nokia lumia 800. The amount of RAM for this device is 512 Mb. but all the free app that displays the main information of the device that I've used indicates that total ram is 363 Mb and not 512. The device itself don't have the

  • Audio solution needed for noise & echo

    I need to get rid of or minimize some noise in an audio clip in Final Cut Pro. There is also a bit of echo in it that I would like to minimize or eliminate as well. Also, if the solution to this requires frequencies or things of that nature, could so

  • Mac OSX 10.9.4 coldfusion 11 standalone server ERROR: HTTP Status 500 - java.lang.NullPointerException

    Hi all. I have installed the cold fusion server. at first with mac server, apache..... but after install cold fusion and want to go to the admin page: HTTP Status 500 - java.lang.NullPointerException I deinstalled the server from mac and cold fusion.

  • DISTINCT Select List SQL

    I am trying to create a distinct select list with a substr to remove either everything after a ":" or a word at the end of the field and am having a little trouble. Hope someone can help. We are on Version 4.1 and I am in the Shared Components for cu