BootCamp Black Screen with white cursor not like the others :S

i searched around but my problem is not like the others i was doing bootcamp than i put my win 7 cd and reboot but a black screen comes with a white cursor and nothing happens and now i dont want the dang win 7 i just want my mac back with my data i eject the cd and reboot my mac gray scereen comes and after 10 sec. black screen comes again says bootable device no found help ! i tried cmd at the grey screen nothing happens i tried cmd+r / cmd + alt / cmd + r +p / cmd+r+p+alt / cmd+alt+r and all that stuff it wont do nothing please helllp i cant even recover my recover thing is inside my mac but cant acess there :S it like im doomed please help please i use lion

Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
Boot Camp 4.0, OS X Lion: Frequently asked question http://support.apple.com/kb/HT4818 http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
iMac displays a black screen during installation of Windows 7

Similar Messages

Dv4-2165dx black screen with white cursor in top left

Hello,
I have the Pavilion dv4-2165dx running Windows 7 32-bit. Last week I was on the computer and a blue screen popped up, and then it went to black. I wish I would have wrote down what the blue screen said, but I missed it. Currently I have been trying to do a system restore on the computer to try and get back on it. I have tried pushing the F8 key to enter safe mode, but that does not work. I try to push the F11 key to enter the system restore, but that does not work. I have hit the escape key while the computer starts up to enter the system restore, and that does not work. I checked to make sure that the hard drive did not have any loose connectors, and it does not. I have ran all of the memory tests and the computer passes all of those. I ran another test and it said to replace the battery, so I did, and that did nothing. The thing that boggles my mind is the computer loads this screen where I can access the internet and check my email before it would normally load into windows. I am not sure if this computer came with a system restore disk as I received it second hand. Basically what I am asking is if anybody knows how to either restore the computer with out the disk, or know where I can get the disk that would be awesome.
thank you

I understand a recovery virus has returned.
Do you recall what the name of the specific virus is?
Did the rescue disk update successfully and not remove the virus or did it fail to update?
This version is the newest rescue disk from Kaspersky. Since the original one isn't working anymore, I recommend making a new one from this download.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Black screen with blinking cursor when installing win 7/vista x64 osx 10.6

i am using bootcamp 3 to install windows 7/vista x64 on osx 10.6.6.when i select install mac reboots and then all i get is a black screen with white cursor.
i have created a 20gb partition with disk utility in fat32 and i had installed windows successfully when i was on osx 10.5.i tried erasing and creating new partition but same problem.
any help will be appreciated

This solved it for me!
From another forum:
"1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.* "

Black screen with white writing on boot - then nothing...

Ok, this is a long story, but here's the abridged version;
I have a mac mini - the old PPC version. It has just come back from being repaired - replacement logic board. However, repaired it is not. Every time i try to start it up, I get a brief white screen with grey apple logo as normal, and then a black screen with white writing on. The writing is exactly the same text as you can see in the console system log. It gets about a page-full through this, and then goes completely black. No video at all.
However, the machine is still working in there - I know this because I'm typing on it now via VNC. It is perfectly happy and all. It just does this weirdness start up and then no video.
My question is twofold:
1. The company that repaired it claims that it booted fine before they gave it back to me; however, it hasn't since I've had it back. Could the boot behaviour be some kind of diagnostic thing they left on my machine, or a mode they left it in. If so, how do I get rid of it?
2. Failing this, does it sound like my vidoe card packed up maybe?
Thoughts, solutions, etc., most welcome!

Have you
tried to simply do a clean install of Mac OS X and
your other software? I normally find that this fixes
90%+ of all unexplained software related issues.
I could, but (a) I'm not convinced it's not related to the replacement logic board and thus a hardware issue, and (b) I can't see to do a clean install because it has no video signal

Macbook Pro boot shows black screen with white text cursor

Hello,
I have a MacBook Pro 7,1 MC374xx/A running Mavericks. My box has two internal hard drives in it. One had the Mac OS installed to it, and the other has absolutely nothing on it. I decided to give Boot Camp Assistant a try and chose the hard drive with nothing on it to install Windows on. I also had an external USB DVD drive attached with the Windows 7 installation disc on it.
So, next thing ya know, my Mac reboots and loads a black screen that says "Memory Overload." I take out the external USB drive and restart. Then it said, "No boot devices found." Now for whatever reason, it's just a black screen with a white text cursor.
What the heck happened?
I selected command R and confirmed that I installed Boot Camp on the right hard drive (the drive that did not contain my Mac OS). Then, I completely erased everything from the drive with Boot Camp on it. But still..black screen with white text cursor.
I have no Time Machine backups available so I'm forced to reinstall the OS. Any idea why this happened? It seems I must have attempted to install Boot Camp improperly. Any ideas or instructions on what to do now or how to install Boot Camp successfully on the Macbook Pro I own?
Earnestly,
Speck

Boot Camp- Windows installation boots to black screen with blinking cursor.

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Black screen with white blinking cursor at top left

Hi, i recently spilt water on my dv7 notebook laptop. I let it dry for a few days n then it switched on n it was fine. I was able to copy all files n pjcs to a usb drive. But the battefy wasnt charging n i had it plugged in at wall. But after a day or two i switchedit on n only got a black screen with flashing cursor. Ive tried all thef11 stuff n ran all the hardwarw tests n memory test n they all passed. Is there anything i can do to save it, feel lost without my laptop :-)

You fried your hard drive, get a new one and reinstall windows

Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP

Hey all.
So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp.
After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally managed to actually install Windows 7. However, after the installing was ready, when Windows was supposed to boot, it just gave me a black screen with no cursor. I really had no idea what to do there, I tried to do some research from google but only found answers regarding a black screen with a cursor DURING the installation. However, I managed to launch Windows in safe mode. I deleted graphics drivers that bootcamp assistant had installed, and then it worked and I got to boot Windows succesfully.
However, as probably all of you know, you can't do much without those drivers. Games, videos, overall performance of the system is kinda horrible.
After that, I wiped the whole system, Mac and Windows, and reinstalled Mac. During the Windows installation I was running on Mavericks, now I've got Yosemite. I might try installing Windows again next week, does anyone have any clue why the black screen happened? What could I have done wrong? And the most important question in my mind, in case that happens, is there any way to install the graphics drivers manually from somewhere? After I uninstalled 'em earlier, I tried to find them manually, but couldn't find any.
Thanks!

Yes, that's exactly what was the problem in the first place, I had a USB3 device. Switched to USB2 device and the installation progress started flawlessly.
The later part I didn't quite get. What are those installation methods, how could they cause the problem there? I had no problems during the installation, but after installation when launching Windows I had the black screen, and that I suppose was GPU drivers problem if I'm not totally wrong? I could hear the basic Windows system beeps etc when I tried clicking everywhere (had no cursor either, just clicking randomly), so the system was running there, but just didn't draw the picture at all.

Ipad has black screen with white bar

My ipad2's screen has gone blank. after leaving it uncharged for a good 18 hours. I switched it on to see a blank, black sceen with a white bar moving downwards accross the screen this fades to black.
I have tried charging it for a good 7 hours as I thought maybe the battery has run down and caused this.
I have also tried resetting by pressing the on/off and home button together for 10-15 secs but no luck.
My ipad still synches to my imac okay. I have restored it to factory settings. This didn't help the problem either.
This actually happened when first took the brand new ipad out of the box and tried turning it on for the first time. But it revived itsself after synching to my imac and being on charge for a few minutes. The support technition I spoke to at the time didnt really know why it did this but suggested it was a very low batterry issue. Although I am inclined to think its something else, now its happened again and charging does not seem to work.
Has anyone had the same problem? If so what did you do? Any suggestions on how to fix it would be gratefully recieved.
Thanks
P.S. I am running iOS 4.3.3 on my ipad. However its not an available option in the OS dropdown for this discussion. hmmm!

I Don't know if this will work for anyone else but just FYI - after loading 8.1 on my iPad it froze for several hours on the black screen with white Apple and progress bar underneath. It would not do anything. I thought I was doomed. I accidentay left it sitting overnight without plugging it Back into the charger. I meant to but got sidetracked and thought it was plugged in. During the night the battery was totally drained so this morning my iPad was dead. I plugged it into the charger and after a few minutes the battery icon came up showing it was charging. I gave it about 30 minutes and then turned it on and the new operating system came up. It looks like it might be ok now. I can't say I recommend this, but it worked for me.

Server 2008 crash - black screen with mouse cursor

dell poweredge 2950 with Perc 5/I RAID, ESXi 4.1 host, Windows Server 2008 R2 SP1 VM
After swapping out a failed raid5 drive this vm began displaying inpage operation error popups while checking folder permissions. event viewer errors:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.
chkdsk /r run from the win2k8r2sp1 install dvd command line resulted in more corrections than i was able to screenshot:
After this the server would only boot to black screen with mouse cursor. same black screen result in safe mode or directory services restore mode. sfc /scannow, startrep, and registry repair from the folder contents @ c:\windows\system32\config\regback
have been attempted with no improvement. I am still able to access the filesystem contents using the command line from the win2k8r2sp1 installation DVD - user + registry files copied over to another drive without problem and i was able to load
the registry hive on another system. This server was doing dns, domain controller and certification authority but the only important item is getting the CA back somehow. Any suggestions are welcome.

Hi,
According the information you have provided, the file system is broken.
After the repair, do chkdsk /r and sfc /scannow give any warning or error?
If yes, it means that the file system and system file are not repaired. Please post the error or warning here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support

Gnome Black Screen with Mouse Cursor after Login

I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.

there are a lot of processess running... dunno killing which process will not cause a problem
here is the xorg log ( sorry i dont have much knowlegde to analyse it )
[ 2957.489]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 2957.493] X Protocol Version 11, Revision 0
[ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
[ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
[ 2957.497] Build Date: 21 September 2014 10:53:13AM
[ 2957.498]
[ 2957.499] Current version of pixman: 0.32.6
[ 2957.501] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
[ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2957.507] (==) No Layout section. Using the first Screen section.
[ 2957.507] (==) No screen section available. Using defaults.
[ 2957.507] (**) |-->Screen "Default Screen Section" (0)
[ 2957.507] (**) | |-->Monitor "<default monitor>"
[ 2957.507] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2957.507] (==) Automatically adding devices
[ 2957.507] (==) Automatically enabling devices
[ 2957.507] (==) Automatically adding GPU devices
[ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2957.507] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2957.507] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2957.507] (II) Loader magic: 0x818d80
[ 2957.507] (II) Module ABI versions:
[ 2957.507] X.Org ANSI C Emulation: 0.4
[ 2957.507] X.Org Video Driver: 18.0
[ 2957.507] X.Org XInput driver : 21.0
[ 2957.507] X.Org Server Extension : 8.0
[ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
[ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2957.512] (II) LoadModule: "glx"
[ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2957.514] (II) Module glx: vendor="X.Org Foundation"
[ 2957.514] compiled for 1.16.1, module version = 1.0.0
[ 2957.514] ABI class: X.Org Server Extension, version 8.0
[ 2957.514] (==) AIGLX enabled
[ 2957.514] (==) Matched intel as autoconfigured driver 0
[ 2957.514] (==) Matched intel as autoconfigured driver 1
[ 2957.514] (==) Matched modesetting as autoconfigured driver 2
[ 2957.514] (==) Matched fbdev as autoconfigured driver 3
[ 2957.514] (==) Matched vesa as autoconfigured driver 4
[ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
[ 2957.514] (II) LoadModule: "intel"
[ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2957.515] (II) Module intel: vendor="X.Org Foundation"
[ 2957.515] compiled for 1.16.1, module version = 2.99.916
[ 2957.515] Module class: X.Org Video Driver
[ 2957.515] ABI class: X.Org Video Driver, version 18.0
[ 2957.515] (II) LoadModule: "modesetting"
[ 2957.515] (WW) Warning, couldn't open module modesetting
[ 2957.515] (II) UnloadModule: "modesetting"
[ 2957.515] (II) Unloading modesetting
[ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "fbdev"
[ 2957.515] (WW) Warning, couldn't open module fbdev
[ 2957.515] (II) UnloadModule: "fbdev"
[ 2957.515] (II) Unloading fbdev
[ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "vesa"
[ 2957.515] (WW) Warning, couldn't open module vesa
[ 2957.515] (II) UnloadModule: "vesa"
[ 2957.515] (II) Unloading vesa
[ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 2957.516] (++) using VT number 1
[ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
[ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2957.517] (==) intel(0): RGB weight 888
[ 2957.517] (==) intel(0): Default visual is TrueColor
[ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
[ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 2957.517] (II) intel(0): Enabled output LVDS1
[ 2957.517] (II) intel(0): Output VGA1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VGA1
[ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output HDMI1
[ 2957.517] (II) intel(0): Output TV1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output TV1
[ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VIRTUAL1
[ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[ 2957.517] (==) intel(0): TearFree disabled
[ 2957.517] (==) intel(0): DPI set to (96, 96)
[ 2957.517] (II) Loading sub module "dri2"
[ 2957.517] (II) LoadModule: "dri2"
[ 2957.517] (II) Module "dri2" already built-in
[ 2957.517] (II) Loading sub module "present"
[ 2957.517] (II) LoadModule: "present"
[ 2957.517] (II) Module "present" already built-in
[ 2957.517] (==) Depth 24 pixmap format is 32 bpp
[ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[ 2957.518] (==) intel(0): Backing store enabled
[ 2957.518] (==) intel(0): Silken mouse enabled
[ 2957.518] (II) intel(0): HW Cursor enabled
[ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2957.518] (==) intel(0): DPMS enabled
[ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 2957.518] (II) intel(0): [DRI2] Setup complete
[ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
[ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
[ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
[ 2957.518] (II) intel(0): hardware support for Present enabled
[ 2957.518] (==) intel(0): display hotplug detection enabled
[ 2957.518] (--) RandR disabled
[ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2957.569] (II) AIGLX: Loaded and initialized i965
[ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
[ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2957.636] (II) LoadModule: "evdev"
[ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
[ 2957.637] compiled for 1.16.0, module version = 2.9.0
[ 2957.637] Module class: X.Org XInput Driver
[ 2957.637] ABI class: X.Org XInput driver, version 21.0
[ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
[ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
[ 2957.638] (**) Video Bus: always reports core events
[ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2957.638] (--) evdev: Video Bus: Found keys
[ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
[ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
[ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 2957.638] (**) Option "xkb_rules" "evdev"
[ 2957.638] (**) Option "xkb_model" "pc104"
[ 2957.638] (**) Option "xkb_layout" "us"
[ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
[ 2957.670] (**) Power Button: always reports core events
[ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2957.670] (--) evdev: Power Button: Found keys
[ 2957.670] (II) evdev: Power Button: Configuring as keyboard
[ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2957.670] (**) Option "xkb_rules" "evdev"
[ 2957.670] (**) Option "xkb_model" "pc104"
[ 2957.670] (**) Option "xkb_layout" "us"
[ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2957.671] (II) No input driver specified, ignoring this device.
[ 2957.671] (II) This device may have been added with another device file.
[ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2957.672] (**) Sleep Button: always reports core events
[ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2957.672] (--) evdev: Sleep Button: Found keys
[ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
[ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2957.672] (**) Option "xkb_rules" "evdev"
[ 2957.672] (**) Option "xkb_model" "pc104"
[ 2957.672] (**) Option "xkb_layout" "us"
[ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
[ 2957.674] (II) No input driver specified, ignoring this device.
[ 2957.674] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
[ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2957.675] (**) Option "xkb_rules" "evdev"
[ 2957.675] (**) Option "xkb_model" "pc104"
[ 2957.675] (**) Option "xkb_layout" "us"
[ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 2957.675] (II) LoadModule: "synaptics"
[ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
[ 2957.676] compiled for 1.16.0, module version = 1.8.1
[ 2957.676] Module class: X.Org XInput Driver
[ 2957.676] ABI class: X.Org XInput driver, version 21.0
[ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.676] (**) Option "Device" "/dev/input/event11"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 2957.710] (**) Option "TapButton1" "1"
[ 2957.710] (**) Option "TapButton2" "2"
[ 2957.710] (**) Option "TapButton3" "3"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
[ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
[ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
[ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 2957.712] (**) ALPS PS/2 Device: always reports core events
[ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
[ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
[ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
[ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 2957.714] (**) Dell WMI hotkeys: always reports core events
[ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
[ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
[ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 2957.714] (**) Option "xkb_rules" "evdev"
[ 2957.714] (**) Option "xkb_model" "pc104"
[ 2957.714] (**) Option "xkb_layout" "us"
[ 2963.887] (II) evdev: Dell WMI hotkeys: Close
[ 2963.887] (II) UnloadModule: "evdev"
[ 2963.887] (II) systemd-logind: releasing fd for 13:69
[ 2963.949] (II) evdev: ALPS PS/2 Device: Close
[ 2963.950] (II) UnloadModule: "evdev"
[ 2963.950] (II) systemd-logind: releasing fd for 13:74
[ 2964.016] (II) UnloadModule: "synaptics"
[ 2964.016] (II) systemd-logind: releasing fd for 13:75
[ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2964.070] (II) UnloadModule: "evdev"
[ 2964.070] (II) systemd-logind: releasing fd for 13:64
[ 2964.123] (II) evdev: Sleep Button: Close
[ 2964.123] (II) UnloadModule: "evdev"
[ 2964.123] (II) systemd-logind: releasing fd for 13:67
[ 2964.156] (II) evdev: Power Button: Close
[ 2964.156] (II) UnloadModule: "evdev"
[ 2964.156] (II) systemd-logind: releasing fd for 13:66
[ 2964.183] (II) evdev: Video Bus: Close
[ 2964.183] (II) UnloadModule: "evdev"
[ 2964.183] (II) systemd-logind: releasing fd for 13:76
[ 2964.271] (EE) Server terminated successfully (0). Closing log file.

Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

Boot Camp- Windows installation boots to black screen with blinking cursor.

I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Turning it on then off doesn't help.

I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Home button and turning the phone off then on doesn't seem to do anything.

Thanks Lucas,
I've tried doing that with no results. Same screen keeps showing. Maybe it'd be more helpful if I told you a bit more info. My phone was randomly playing music, and the voice control would also suddenly start without me touching the phone. Then I let the battery die and started to recharge when on the screen it indicated to plug into my computer/iTunes, I tried to restore but was getting an error message (can't remember what it said now). Battery died and now my current issue of the black screen with white apple. I'd love to be able to restore my phone but now its not showing as a device on my iTunes. HELP! Any other suggestions?

Black screen with white apple logo won't go away! Help please.

Last night I turned theipod completeley off and restarted it. The black screen with the white apple logo came on and hasn't went of since.
I've tried everything I could find in the forums and on the support page.
iTunes will not recognize my ipod which has continously tried to start up again every 5 minutes.
I don't know what more to do, ANY help would be greatly appreciated.
Thanks
Dana

I did try that. When I do that the red slider bar to turn the ipod off doesn't come up.
Its still trying to reset itself but won't go any farther than the black screen with white apple.
Thanks

Black Screen with white text at startup (??)

Hello All:
I have a 2010 15" MacBook Pro, just got it in June. Had to send it in for a logic board replacement and now have it back. Everything works great except now instead of having the standard Apple greyish startup screen, I have a black screen with white text that scrolls through all of the startup stuff. I figure they changed some line on a plist somewhere so they could watch the startup and make sure everything was OK, then forgot to change it back.
Although I know it is good to know what's going on under the hood, I would rather it started up the regular way. Anyone know how to switch it back? I would call Apple, but would rather not sit on the phone for a long time for what I believe is probably a very simple fix. I did a search but couldn't find my problem listed....
Thanks everyone...

Kappy:
Thanks for the reply. I looked at the plist, but the -v was not there. Here is a copy of the plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel Flags</key>
<string></string>
</dict>
</plist>
At least I know what it is called now - a "verbose startup".
Again, thanks for the help. Learn something new every day.

BootCamp Black Screen with white cursor not like the others :S

Similar Messages

Maybe you are looking for