[BootCamp Driver] Can not find the driver 'Netwrok Controller' on iMac 21.5

Dear All,
I installed bootcamp driver on serveral iMac and it worked fine.
Now we got the new iMac 21,5'' and when I run BootCamp 3.0, it install all driver excepted for Network Controller.
If I go to 'Manage' and then 'Device Manager', I can see 'Other Device'->'Netwrok Controller' with yellow interrogation mark.
On iMac 21'' and 24'' the problem does not occur...
On imac 21.5, the network card works fine and I can setup an ipadress, even if I have that interogation mark for the 'Network COntroller'
Some one has an idea where can I fin a suitable driver in order to remove that yellow interrogation makrs?
many thank
Pierrot

Hello, Some on has an idea?
It will help,
tks

Similar Messages

  • I have a compaq 6200 pro i can not find the driver for SM bus controller.

    I down graded the 6200 pro with the i3 chip  to winXP and now I can not find the driver for the SM bus controller does this system have a sm bus controller?

    Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

  • Windows can not find the driver for PCI-1428

    Windows 2000 Find's the PC!-1428 Board, but it doesn't
    find the Driver. IMAQ 2.51 it's all ready installed.

    Loo. If you go into MAX and look under the software tab, does NI-IMAQ 2.51 show up? If so, make sure the Image Acquisition VIs are available in LabVIEW (or make sure the library files are available in your programming environment). If the VIs don't appear, or if the software isn't in MAX, then you probably have a dirty installation. To clean it up, make sure NI-IMAQ is totally uninstalled and that the NI-IMAQ folder is empty.
    If everything appears to be normal in software, but the 1428 card still doesn't install, then the card may be bad. The best way to test this is to install the board on another computer. If it works on one computer but not the other, then it's definately a software problem.
    Kyle V
    Application Engineer
    National Instruments

  • I have an Epson R2400 and I can not find the driver for borderless printing

    I have two Epson printers; I added the first, a R200 using the Printer Utility and in the add printer screen it asked me what page setup I wanted. I chose ALL and it gives me the ability to print borderless prints. I then added the R2400 using he Printer Utility but the "page setup" is grayed out and I do not have a borderless print option o this printer.
    I have tried deleting the R2400 from the list of printers and adding it again without success.
    I am using the drivers that came on the CD-ROM with the printer.
    Has anyone had a similar experience with the R2400 borderless print issue and might anyone have an answer?
    Thank you.

    Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

  • With bootcamp it can not find ntsf drive

    I have been using latest addition of Bootcamp 5 in an effort to install Windows 7 in a partition.  In every attempt it indicates that, even after using Bootcamp 5, it can not load Windows 7 on the "Bootcamp" partition but it always says it needs an NTSF formated partition.  Tried 8 times.  What am I doing incorrectly?

    As Csound1 has already stated, it's worth relooking at the setup guide provided by Apple (link provided below for you), and yet definitely do some sort of backup incase things do go wrong, which has done for me and taken well over a week to fix!
    http://www.apple.com/uk/support/bootcamp/
    Do you have two HDD's? Are you installing Windows on one HDD and have the Mac OS on another? Or just the standard one HDD installed?
    Good luck and report back how you're getting on or are having issues.

  • Can not find the driver for hp desjet 2515

    Hi,
    pls i have being searching online for the driver of my new hp Deskjet ink Advantage 2515 to install for my microsoft window 7 (32-bit) pls help.
    Thank you,
    olutoye jeremiah

    Hi,
    Please download the following package and install on your machine:
       http://ftp.hp.com/pub/softlib/software12/COL42531/al-109467-1/DJ2510_1313.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
    Or, you can upgrade to Lion or Mountain Lion:
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • It says "can not install the driver: could not find media for this driver"

    I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says  "can not install the driver: could not find media for this driver", how ever i get a beep for every error message.  In my device manager there is no UAA and in services.msc windows audio is started.
    I have tried almost everything on net but not able to solve this, plz help.

    vendor wrote:
    = No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
    I think there is not.
    Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
    Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
    Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
    IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
    jutapa

  • Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

    Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
    I am getting the message that Windows 7 can't find the driver. I don´t understand why?
    My Windows Update is set  to automatic.
    I see the device under printers. But when I click on it it says driver missing.
    Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website. 
    Can anyone help me, pleease?
    Honza

    I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

  • Can't find the driver of laserjet p4015dn for windows XP

    I can't find the driver of laserjet p4015dn for windows XP. Where can I download it?

    Have you gane to the Windows Update website to see if there was a Synaptics Touch Pad Driver made available by  Microsoft? Although I did my 8.1 upgrade a while back, I seem to recall such a update was available. 
    Otherwise if my memory is in error, you can always go right to the Synaptic website and download and install their latest driver.  Here is the link.......
    http://www.synaptics.com/resources/drivers
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

    My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
    The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
    I've run out of ideas. Help would be very much appreciated. Thanks.

    have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy....   google...." fcpx time machine problem"  Frist page link 
    http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
           You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
    booya!

  • Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

    I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
    My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
    We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
    We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
    I have...
    ...reset
    ...reinstalled 7.3.1.3 (over and over and over)
    ...tried different USB ports. (Early on, we saw it once after swapping ports).
    ...tried turning off the ability of the computer to 'Turn this device off to save power."
    I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
    So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
    But even after having tried everything, I still have an unrecognizable iPod.
    When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
    And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
    Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

    Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
    Regards. Adam

  • I can't find the driver for my intergrated camera for X201

    My intergrated camera spoilt previously and I received help from a lenovo technician months ago. He helped me to change it into a new integrated camera. But the problem is, the device has got no device drivers(software) in it. Therefore, right now it still can't work. I tried searching for the drivers on the lenovo site but it isn't helping at all. Because the new integrated camera that I got is of a different model known as 5U875 and I can't find the driver to install in it. Please help me. Thanks

    Try this one:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6nca20ww.exe
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Slow-Start Up and "can not find the server" dialog box

    hi there -
    2 year old Ibook G4. When I try to open either Safari or Netscape the "can not find the server" box pops up.. I have a solid connection wi-fi for the wireless signal is on full strength. I have cleared my cache. Also I am experiencing start-ups that are taking 2-3 minutes. The color wheel just keeps spinning.Also, I have done repair and I renewed the DHCD. Not sure what else to do?

    as a guess, spinning wheel could be caused by failing hard drive.
    often failing hard drives will pass all tests by the utilities.
    you may want to back up any important files just in case.
    if the iBook boots up from the OS install CD/DVD with no problems, issues could be caused by the corrupted files on the hard drive or failing drive.

  • I have one folder with several projects all of which Aperure can not find the original.  I do not use referenced files.  I can't make any adjustments like cropping etc. What can I do to print any of these photos?

    I have one folder with several projects all of which Aperure can not find the original.  I do not use referenced files.  I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos?  IO have no ther projects with this problem.  My Aperture Library is automatically saved to two external drives.
    Dick Koos

    I have one folder with several projects all of which Aperure can not find the original.
    Have you checked inside your Aperture library, if the original files are still there?
    Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
    Are your original files still there?
    If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link:  Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images.

Maybe you are looking for