Bootcamp error after upgrading to lion

I get this message
/Library/Filesystems/fusefs.fs/Support/fusefs.kext

I am asking the moderators to move this thread to the Boot Camp forum.

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

ICal Caldav errors after upgrade to Lion

Dear all,
I had a perfect working setup (MacBook Air) with Snow Leopard, iCal accessing my agenda via caldav to zimbra mailserver.
Upgraded to Lion (10.7.2) and since then iCal does not sync correctly anymore:
1. events created on my mba do not end up on the server
2. event invites by other people or events created via the zimbra webinterfaces do not always end up in iCal
I've deleted and (re)created the account multiple times, erased caching and other directories in between, no change.
Configured the same account on a colleague's mac book pro also with Lion upgrade, everything working fine....
Error I get from iCal (Version 5.0.1 (1547.4))
The request (CalDAVAccountRefreshQueueableOperation) for account "webmail.mydomain.com" failed.
From syslog:
Nov 17 12:07:36 My-Name-MacBook-Air iCal[461]: Account refresh failed with error: Error Domain=CoreDAVErrorDomain Code=3 "The operation couldn't be completed. (CoreDAVErrorDomain error 3.)" UserInfo=0x7f99edd356c0 {AccountName=webmail.mydomain.com, CalDAVErrFromRefresh=YES}
From console log:13/12/11 21:05:27,212 iCal: CoreData: error: (1) I/O error for database at /Users/stevenkrekels/Library/Calendars/Calendar Cache. SQLite error code:1, 'Expression tree is too large (maximum depth 1000)'
13/12/11 21:05:27,238 iCal: *** -[CalManagedObjectContext executeFetchRequest:error:]: error: Error Domain=NSCocoaErrorDomain Code=256 "The file “Calendar Cache” couldn’t be opened." UserInfo=0x7fe1b6080f60 {NSFilePath=/Users/stevenkrekels/Library/Calendars/Calendar Cache, NSSQLiteErrorDomain=1, NSUnderlyingException=I/O error for database at /Users/stevenkrekels/Library/Calendars/Calendar Cache. SQLite error code:1, 'Expression tree is too large (maximum depth 1000)'} {
    NSFilePath = "/Users/stevenkrekels/Library/Calendars/Calendar Cache";
    NSSQLiteErrorDomain = 1;
    NSUnderlyingException = "I/O error for database at /Users/stevenkrekels/Library/Calendars/Calendar Cache. SQLite error code:1, 'Expression tree is too large (maximum depth 1000)'";

I forgot to mention that any help would be much appreciated

I can't access Windows 7 through Bootcamp anymore after upgrading to Lion, please help

Hi All.
I just recently upgraded my operarting system to the new OS X Lion. I had Windows 7 running through Bootcamp. Now every time i try and start windows like I used to, the computer restarts but then i get a black screen with text on the top left saying something like "no system disk". What i'm saying is that i cannot get into windows anymore since I upgraded. Anyhelp will be highly appreciated please

It shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution

My iTunes doesn't open at all. Shows me an error after upgrading to Lion.

After installing OS X Lion I tried to open my iTunes and an error popped out. It said that library could not be loaded.
I waited for an iTunes 10.5 upgrade and installed it. But it still won't work!!
Help me please.
Here is the error that it shows:
Process:         iTunes [999]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.5 (10.5)
Build Info:      iTunes-10509941~1
Code Type:       X86-64 (Native)
Parent Process: launchd [127]
Date/Time:       2011-10-14 13:12:14.323 +0200
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: 452C0830-9F06-4EE4-9FC1-37CD367ADD43
Interval Since Last Report:          22887 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      1AB61C15-0083-4B8F-88F3-54182B8F9D66
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
       0x109562000 -        0x10a5b7fef com.apple.iTunes (10.5 - 10.5) <235339DF-5CF1-9743-9725-502B860CCE3A> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff69162000 -     0x7fff691971ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBookAir3,1, BootROM MBA31.0061.B01, 2 processors, Intel Core 2 Duo, 1.4 GHz, 2 GB, SMC 1.67f3
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR3, 1067 MHz, 0x02FE, 0x45424A3130554538454655302D41452D4620
Memory Module: BANK 1/DIMM0, 1 GB, DDR3, 1067 MHz, 0x02FE, 0x45424A3130554538454655302D41452D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD1), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en0
Serial ATA Device: APPLE SSD TS128C, 121,33 GB
USB Device: FaceTime Camera (Built-in), apple_vendor_id, 0x850a, 0x24600000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0243, 0x04300000 / 3
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x04500000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821b, 0x04530000 / 4

Had the same problem with the new update. I finally got back to my previous version by using system restore. After the restore I had to go to the "All Programs" list and click on Quicktime and iTunes individually to allow them to re-configure, then had to restart the computer again. After that all's well. My lbrary was intact.
I tried everything to get the newest version to work, including completely uninstalling my current versions of QT and iTunes, then downloading the latest directly from the Apple website, but, after 3 attempts, nothing worked. Guess I'll have to wait for the next update and try again.
By the way, your library is not actually stored in iTunes--it is stored in your Music folder, so you should not lose anything by uninstalling iTunes if you need to.

Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard (non-server version) to Lion Server 10.7.2. After updating to 10.7.3, the problem persists. When syncing, it gives thounsands of error like this: The process cannot access the file because it is being used by another process. WinXP clients are fine with the Offline Files function though.
I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "Oplocks" for short, in the SMB protocol. Since Apple has re-written Samba, there's no "smb.conf" anymore to change the Oplocks setting. Maybe it's possible to change the setting in "com.apple.smb.server.plist"?
From the Internet:
1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP, etc.) other than SMB.
2. Offline Files will NOT work properly if Oplocks is disabled on the server side.
3. It was possible to config oplocks setting in smb.conf in Mac OS X versions prior to Lion but now there's no such config file.
My Question:
1. Does anyone else have similar problems?
2. Is it related to the Oppurtunistic Locking thing?
3. Is Oppurtunistic Locking enabled or disabled in Lion Server by default?
4. If it's related to Oplocks, how can I change the setting on the server?
5. I've noticed that the authentication from Windows PCs to the SMB share on the Lion Server is much slower then in SL. Could this somehow be related to my problem?
Thanks for your time! :-D

Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
from this article
http://support.apple.com/kb/TS4149
and this:
http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

After upgrading to Lion, Printer error messages.

After upgrading to Lion, I suddenly see the following error message whenever I print to my HP printer: "You can't open the application PrinterProxy because PowerPC applications are no longer supported." Now, my document will print, but I can no longer adjust settings. Help??

PowerPC applications are no longer supported under Lion. If you can't find Lion drivers on HP's website, you either need to go back to Snow Leopard or start looking for a newer, compatible printer.

After upgrading to Lion my videos have a codec error and won't play

After upgrading to Lion my videos have a codec error and won't play

Hi waiex,
I have recently upgraded to Lion and have the same problem as you. Did you find a solution?
Thanks in advance.

After upgrading to Lion the bookmarks in Preview returns error message.

After upgrading to Lion the bookmarks in Preview returns error message : The File "****" couldn't be opened because you don't have permission to view it. To change the perimssion, select the item in finder and Choose File info. I have bookmarked plenty of files in Preview. How to overcome this error message???

Doesn't work Steve. I think it is an issue with Preview being sandboxed (check the sandbox column in Activity Monitor: Preview = Yes). Sandboxed apps restrict file access to those the user has explicitly selected. My theory is that this causes the unfortunate side effect of bookmarked or linked PDFs not working. A simple test: open a file with bookmarks, manually open the bookmarked file and then select the bookmark in the first file - it should open with no complaints about permissions (which leads to a weak workaround: open all the PDFs you intend to work with!).

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

After upgrading to lion Time Capsule is solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot, reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?) and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

After upgrading to Lion Time Capsule solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot, reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?) and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

After upgrading to lion my web server won't run

after upgrading to lion my web server won't run

From System Prefs clicking on Web Shareing wont start.
From the terminal attempting to run httpd gives me:
iBookWiz:~ steve$ sudo httpd
httpd: Syntax error on line 117 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_fastcgi.so into server: dlopen(/usr/libexec/apache2/mod_fastcgi.so, 10): image not found

After upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

after upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Bootcamp error after upgrading to lion

Similar Messages

Maybe you are looking for