Bootcamp gone horribly wrong, Mac HD GONE

So I was installing Windows XP via bootcamp, and chose Drive C to format it in , but that was weird cause it didnt show any of the usual other drives, so i selected it.
After it was done installing it did the usual reboot, and after it rebooted all i get is a white screen.
I rebooted it again holding down the option key to select which partition to boot from and... ALL PARTITIONS WERE GONE
The Mac HD partition was gone, all I saw was the installation disc.
So i thought i would just reformat the whole drive and reinstall Leopard, but while i was doing that, when it gets to the step "Select a destination to install Mac OS X" Nothing is listed and it cant continue the installation.
So from the installer cd I went to Disk Utilities and confirmed that the Mac HD was gone and Windows partition from bootcamp mightve went over it and wiped it.And I cant even use that windows partition that was called "disk0" cause apparently is was formatted incorrectly.
I cant create a new partition on disk utilities either cause the buttons are greyed out.
What shall I do? I'm at an utter lost

Oh I tried looking up my HD info using the disk utilities info button and this is what i got.
The Macintosh HD partition got replaced with the Windows NTFS Partition named 'disk0' and didnt even format properly.
Name: disk0
Type: Volume
Disk Identifier: disk 0
Mount Point: /Volumes/Untitles
File System: Windows NT File System (NTFS)
Device Tree: /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Writable: No
Capacity: 186.3 GB (200,049,647,616 Bytes)
Free Space: 127.5 GB (136,904,531,968 Bytes)
Used: 509.7 MB (534,417,408 Bytes)
Number of File: 3,050
Number of Folders: 0
Owners Enabled: No
Can Turn Owners Off: No
Can Be Formatted: No
Bootable: No
Supports Journaling: No
Journaled: No
Disk Number: 0
Partition Numer: 1
Main Macbook Pro Harddrive:
Name: FUJITSU MHY2200BH Media
Type: Disk
Partition Map Scheme: Unformatted
Disk Identifier: Disk 0
Media Type: FUJITSU MHY2200BH Media
Media Type Generic
Connection Bus: Serial ATA 2
Device Tree: /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Locked: Yes
Writable: No
Ejectable: No
Mac OS 9 Drivers Installed: No
Location: Internal
Total Capacity: 186.3 GB (200,049,647,616 Bytes)
Free Space: 127.5 GB (136,904,531,968 Bytes)
S.M.A.R.T. Status: Verified
Disk Number: 0
Partition Number: 0
It seems it says Locked and unwritable, could that be why i couldn't partition it?
Message was edited by: melonpan

Similar Messages

Removing imlib2-cvs: "something has gone horribly wrong

Hi there,
I did a pacman -Syu today, and pacman wanted to replace imlib2-cvs with imlib2. So far, so good. I said "yes" to the removal, but pacman complained that ffmpeg and adesklets require imlib2-cvs.
So I deinstalled those two packages.
Now, if I try to upgrade, I get the following error message:
error: something has gone horribly wrong
If I pacman -R imlib2-cvs, it claims that imlib2-cvs is required by adesklets and ffmpeg--even though those two packages have been removed.
So obviously, something has gone wrong with the pacman "database." Question is: how can I fix it? Delete the entries for adesklets and ffmpeg in /var/lib/pacman? Delete the entry for imlib2-cvs? Do something completely different?
Some feedback would be much welcome. I hope my system is not broken for good ...
Cheers,
-Sascha.rb

pacman -Rd imlib2-cvs
pacman -S imlib2
... let me install the new imlib2 package, after all. No idea whether it fixed the weird dependency issue I had ("something has gone horribly wrong"), but at least it's working ...

Pacman: "something has gone horribly wrong"

Hi all,
So I started The Big Xorg Upgrade on my laptop. First I removed xorg (to get around the bitstream fonts conflict) and started pacman -Syu. During the package downloads I noticed that I still use some old configuration where the downloads come from ftp.nethat.com , which is very far from me, whereas now I have a much closer mirror ftp.estpak.ee . So I killed pacman and wget, corrected pacman.conf, and rerun pacman -Syu. The downloads were finished nicely, but then I got the following message:
checking package integrity...done
error: something has gone horribly wrong
I have never seen such an error before, and probably I should not have seen it at all. But still I did:) So can anyone tell me what it is about and under which conditions is it shown? Should I file a bug report?
Jan
Edit: I cleared the package cache, downloaded all the packages from the same source and I still get the same message. So it was not a problem caused by the interrupted upgrade (and in fact I have done interrupted upgrades in the past with no problems). Any ideas and/or explanations are greatly welcome.
Jan

Cerebral wrote:
Hm... try upgrading xorg first, maybe?
pacman -S xorg
then the full update?
Tried that and the message is still the same.
Cerebral wrote:On an unhelpful note: that's possibly the scariest error message I've ever seen.
Yeah, Arch is not for cowards:D
But the mystery still stays ... any comments from the developers?
Jan

Something has gone horribly wrong...

After a days long battle to get my cd's and audiobooks loaded on to my iPod video, all seemed well. On the four hour drive to my girlfriend's parents' house we listened to most of "The Lion, The Witch and The Wardrobe." When we got to her parents' house I plugged the iPod into their Mac (my computer is a PC) to recharge it and to use iTunes to try and get all our audiobooks to be in listed under "audiobooks" instead of "songs."
But then something went horribly wrong. When I looked at the contents of my iPod, almost all the tracks had little exclamation points next to them indicating that the file's location was unknown. In fact, some of the tracks that we'd just been listening to moments before were now missing!
This is very bad because we're in the process of leaving the country for several years, my computer is now in storage and the reason we bought the iPod was so that we could have stories for our long drive and music once we got there.
Can I fix this problem without reloading everything?
Thanks,
Ben

Sorry for your loss. This is generally how the iPod works. It is part of the way that Apple is trying to make the recording history by not (easily) allowing people to copy their playlists from machine to machine.
If you have iTunes set to automatically manage your playlists for that iPod it will replace the contents of the iPod when you hook it up to another computer. It should have given you a message that says something like "This iPod is managed by another computer. If you proceed you will loose all songs on this iPod."
At least I think that is probably what happened. You aren't completely clear, but is seems that a few songs were left? If that is the case I don't know how it happened. Perhaps you are using different versions of iTunes and that had something to do with it.
It may be possible to get the music back, but I don't know how to do it. Reloading everything is probably your best bet. Depending upon how much stuff you have and the capacity of your iPod you might want to carry a "backup" of all the files as data. Then if you lost them in the playlists part, you could hook to a friends computer, copy all the data off that partition and reload it. Good luck with that.
If you get the music restored you might want to look into getting a charger of some sort. You won't always be able to count on hooking up to somebody else's computer.

Mac has gone horribly wrong

I got this off the internet since i was searching for the problems i am experiencing to find out what was wrong but it summarizes everything i have experienced.
"There are many many problems now and I'll list what's happening:
iTunes - When I try and launch iTunes I get the error "The iTunes application could not be opened. An unknown error occurred (13014)"
Mail - I get the following error when trying to retrieve messages - There may be a problem with the mail server or network. Verify the settings for account “Gmail” or try again.
The server returned the error: The connection to host pop.gmail.com on port 995 failed.
Appstore - I get "Cannot connect to the app store"
Spotify - Doesn't work, when launching I get the error "keychain "login" cannot be found to store "nothctap" (that's my username). When I try and play a song I get an error "There was a problem storing temporary files on the hard disk"
Safari - Randomly crashes and won't access my internet banking or any apple help sites. I get a blank browser with the following text - Safari can’t open the page “https://discussions.apple.com/thread...rt=0&tstart=0” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again.
I can't download anything at all, when I try and download something I get the following error - Safari could not download the file “Name of file in here” because there is not enough free disk space."
However, i go to activity monitor and i have plenty of space.
Since these problems have started, my Mac has been slowing down like crazy. It freezes up a lot and i eventually have to resort to powering down by holding down the power button. My Mac is brand new!! i hate this please help!

Great advice from Paul, just to add...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

The good install that has gone horribly wrong

I have identical iMacs in the house. New 2.8 gHz aluminum models. The day that Leopard came out, we bought a family pack since we have 4 machines capable of running of the OS.
The only two we've updated so far are the iMacs. While the initial install went what one would consider flawless (upgrade after backing up data), its only now that we've started having problems.
After working on setting up permissions for folder/file sharing (home network and all), NOTHING could be accessed, moved, or deleted WITHOUT requiring authentication. Tried for countless hours to try and fix the permissions on the disks to match the working iMac and to no avail could NOT add admin user back to the drives (internal drive + 2 external drives). Don't ask - I dont know HOW it got dropped. It was there one minute and gone the next after file sharing got turned on.
So, backed up what was important (since the TimeMachine drive got hosed as well), and did a reinstall.
Attempt number 1 - Same boat - using just simple reinstall tactics. No permissions fixed
Attempt number 2 - Wipe internal drive - install Leopard. While it fixes the internal drive permissions, the external drives were still hosed.
At this point, copied everything from the external drive to the internal and reformatted the drive with success (restoring permissions), so THAT is good to go.
Trashed TimeMachine backups, reformatted drive. Success with restoring permissions.
Now here's the problem. Since the 2nd install attempt was a clean wipe of the drive and a reinstall of the OS, you can now throw NOTHING away. Everytime you try and empty the trash or move anything even into the trash you get prompted for your password as if its an Administrator action.
Has ANYONE run into this and what can be done to fix it?
I am contemplating restoring the system with the original 10.4 disks and then upgrading to Leopard and not worrying about sharing any folders over the network until this is solved.

First rule in using these forums is to search them. Try permissions, ownership, authentication, etc. There're many topics addressing the problem. See these:
http://discussions.apple.com/thread.jspa?threadID=1216618
http://discussions.apple.com/thread.jspa?threadID=1213742
http://discussions.apple.com/thread.jspa?threadID=1197971
http://discussions.apple.com/thread.jspa?threadID=1209997
http://discussions.apple.com/thread.jspa?threadID=1209117

Something's gone horribly wrong between 4 apple devices in my house and I am desperate for some help! I have a MacBook Air, my iPhone and my mums iPhone. And I'm having massive syncing issues! PLEASE HELP!

Ok so long story short I have a mac, a MacBook Pro and two iPhones in the house, one is mine one is my mums.
I only recently bought the MacBook Pro, I turned iCloud on on it and used my iCloud account to sync with my phone and now it has:
A) deleted all my contacts from my phone and MacBook
B) replaced them with the contacts from my mums phone
C) deleted iCal from the main Mac
The problem is none of these are supposed to be linked, mum and I don't share the same apple id or log in details, so I don't know why/how this is happening.
Also I went I onto the main mac to try and see if it was an iCloud issue and there doesn't seem to be iCloud installed on the system at all, it just gives and option for "mobile me" and then asks me to install it/activate it.
Can anyone give me any clues as to why this night be happening? And how I can get my contacts back and keep the two phones and computers completely separate?
Any help would be much appreciated!
Thank you :)

Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend.

Partition Scheme Gone Horribly Wrong

This is a problem that I've lived with for awhile now but it's only recently become a problem.
About a year or two ago i was installing the boot camp beta and midway through it's partitioning it froze up on me. When I rebooted my computer i found my hard drive had now been partitioned into 4 partitions. Macintosh HD, disk0s3, disk0s4, and disk0s5 (in various sizes from 900mb to 3gb). They originally had data in them but I've since deleted it. The partition scheme is "GUID Partition Table" and the 4 partitions are formatted "Mac OS Extended (Journaled)"I launched boot camp to try and change it back to normal, boot camp told me it could not partition my harddrive or unpartition it.
A year later I want to install leopeard and it won't let me bacause my harddrive is also apparently formatted incorrectly. What can I do?

Your best bet is to reformat the drive, which will also erase it. So, you'll need an external drive to back up the data on it (something you should be doing regularly anyway!)
You could try booting from your Tiger install DVD, select your language, and then Utilities menu > Disk Utility and Repair your disk. This won't get your other partitions back into the main one (need to reformat for that) but may allow you to install Leopard.
FYI, GUID partition table and Mac OS Extended (Journaled) are correct for installing Leopard, which suggests there's something else going on, and that's why my first suggestion was to reformat.
Hope this helps...

Power Failure: Boot Camp Installation gone horribly wrong

Was in the middle of the Windows installation part of the Boot Camp setup, and our building had a brief power failure. The Mac went dark. Upon reboot, it boots to a white screen but progresses no farther. The Windows XP install disk is still in the SuperDrive.
1. Partition was created successfully by Boot Camp Assistant
2. Windows installation had started, and was in the process of reformatting the partition to NTFS when the power failed.
3. iMac boots to white screen and stops.
I assume I need to get the WinXP disk out so I can boot from the OS X disk, but it isn't patently obvious how to do this without an OS interface. No hole to poke in a paperclip a la Windows drives.

Tried with no progress: still stuck at WSOD (white screen of death).
1) Booting with the Install Disk 1 in the SuperDrive while holding down the C key.
2) Booting while holding down the Command + Option + O + F keys
3) Booting while holding down the Command + Option + P + R keys
4) Booting while holding down the X key
5) Booting while holding down the Option key (this generates a non-functioning mouse pointer on the WSOD, which is more than anything else has done).
I have held down the keys in the following orders:
a) Before I push the power button
b) As soon as I push the power button
c) As soon as I hear the Mac chime
I have released the keys in the following orders:
a) As soon as the white screen appears following the chime.
b) Held for 60-90 seconds or more, with no change/response on the screen.
Unless someone else can offer another option, this is likely my next approach:
http://discussions.apple.com/thread.jspa?messageID=6498723&#6500810

Library Transfer to New Computer Gone Horribly Wrong

I got a laptop for Christmas, so I tried to use my iPod to transfer my library from the old computer to the new laptop. I followed all the directions, but when I got to the last step that said all my songs and playlists and everything should be in itunes, nothing was there. And there weren't any further directions for what to do if that should happen. So I imported the file that I had transferred and I thought I had solved my problem, but when I double-click to play any of my songs itunes comes up with an error that says it can't locate the song file. It would take forever to go through individually and match up all the folders, not to mention the whole thing is somewhat jumbled and some files are missing completely. I need help figuring out what went wrong, and if I should start over and try the DVD method or something else...i have roughly 1000 songs+video so I don't know how many DVDs that would end up filling.
Help please!
Windows XP

I would seriously thing about getting a larger drive for your computer. If you are talking about your Thinkpad, then probably the best thing to do is invest in an external hard drive. You can buy them ready made or put one together for very cheap.
If you then set up your iTunes to work off the external hard drive, you should then be able to get all your tunes off the iPod and into the external drive.
Patrick

PLEASE HELP! WINDOWS INSTALLATION GONE HORRIBLY WRONG!

Last night I decided to install Windows XP on my new Macbook, so that I could use some software that will only work with that operating system. I used Boot Camp to do everything (i.e. set partitions, etc.) and it prompted me to Restart and install Windows, which I did.
Somewhere along the line, the installation process was messed up and I ended up with a computer that hadn't a trace of of Mac OS X present, (even though I had only set aside 32 GB of my 250 GB hard drive as a Windows partition), and a (Windows) set up screen telling me that there was no bootable disk in the optical drive. So, I gave up on the Windows installation, and put in the MAC OS X install disks that came with the laptop, hoping to salvage anything and everything that was left.
I got to the set-up screen where it asked me to choose my language and agree to the user agreement, both of which I did, and everything was going smoothly until I had to "Select a Destination"...there was no such destination to be found. I then went into the "Disk Utility" application, to find that it would not let me repair the disk or even erase the entire thing and start from scratch.
So now, basically I'm left with a bricked $1600 laptop with no operating system, as the Mac OS X installation will not allow for me to pass the set-up stage without choosing a non-existent destination. Can anybody with knowledge on the subject help me out please?!

Sorry to hear about your trouble. I've been there and it was so distressing I can't remember exactly how I fixed it.
STILL - there is nothing here that is terrible. If you really want to boot to disk and use disk utility to reformat or erase, you can. I see from your report that you have tried this already, but I'm guessing you didn't click on the exact right hard drive identifier. Try it again, but if you are sick of noodling around getting nowhere, take it in to a service agent. All your stuff is still there and someone can find it.
EDIT
In case this means something - in my own case I got frustrated, booted to disk and did a 7 pass erase of the entire hard drive (it took hours) So it was factory fresh and I did a new install all over again. A lot of work. Later I learned it would have been easier to just make a partition of the entire drive on disk utility, then remove it. You could do a three or four partition and switch back to one in less than a minute - this will wipe the drive of all references, and it would be clear to start a fresh install (if you don't mind losing everything and starting over.)
Otherwise there is definitely software out there that rescues 'lost' data.
Message was edited by: NA Smith

Leopard install gone horribly wrong

Decided to buy Time Capsule today for use with my Macbook. Can't remember the specs but it's just a year old so I've been running 10.4. Knew I needed 10.5 for Time Machine so I bought Leopard today too.
I popped the disc in and it scanned it for 20 minutes or so and then gave an error saying the install failed. Restarted and tried again and asked me to partition or clean install. Or something along those lines. So I tried to cancel out as I don't have my files backed up. From then on in my Macbook only shows the grey screen with the spinny wheel for a few seconds and then black screen. I was able to get the DVD out by holding down the mouse while resarting. But my Macbook still won't start up. Just the grey screen for a bit and then blackness.
Any ideas? PLEASE!

First you need to get your data backed up before doing anything else.
Get an external drive (I don't know if your time capsule will work for this) and hook it up to your Mac. Boot from your Leopard or Tiger install DVD. Launch Disk Utility from the Utilities menu. Use the Restore tab to clone your internal drive to your external drive.
Then use Disk Utility's First Aid tab to repair your internal drive. If Disk Utility cannot repair it, you will need to erase it completely, and install Leopard from scratch. You can then recover your data from your backup drive, and your iLife apps from your Tiger DVD.

Gnome Shell gone horribly wrong - Help!

Hi, I'm new to Arch Linux. I'm using Gnome 3 with Gnome shell, and everything was coming along just fine.
I'm not sure what setting I've changed, but now Gnome Shell fails to startup properly. I mean the top panel is missing, and I can't use it normally. I'm not sure how to describe it, but a lot of the graphical elements are amiss or screwed up. Alt+f2 doesn't work, and docky doesn't show any animations, infact it has a black box around it.
The problems are all visual based, but they're quite severe, I can't move / resize / close windows, sometimes I'm unable to type in the terminal.
I know that my startup items are loading as Conky, docky and guake are loading. Is there some startup item that I've disabled by mistake? Re-installing gnome-desktop and gnome-shell didn't help.
If I type
gnome-shell --replace
in the terminal, everything becomes fine and my normal desktop is restored.
Is there anyway I can diagnose this problem and sort it out?
Thanks in advance.
[EDIT] - I managed a workaroudn by adding
gnome-shell --replace
to my list of startup items. But it's pretty fragile, can someone help me out ?
Last edited by Paanini (2011-12-31 12:30:38)

Paanini wrote:So GNOME looks at either ~/.config/autostart OR ~/.xinitrc for startup?
I assume you mean "startup application" like Conky etc. with "startup". AFAIK, GNOME only looks at the ordinary desktop files in ~/.config/autostart when it starts up. Those desktop files are nothing else than simple text files that are compatible with the default parsing engine that ships with Glib, the backend of GNOME. Go check them out with a text editor.
You only need .xinitrc if you start X, a separate thing mind you, via startx or the like. If you start X without a display manager like illustrated in the wiki and as I prefer to do it, you can often achieve the same results by editing either .xinitrc or playing around with the application gnome-session-properties. The GUI way is perhaps safer as GNOME is already loaded when your startup apps are executed.
https://wiki.archlinux.org/index.php/Start_X_at_boot
Finally, here's my .xinitrc for an example.
#!/bin/sh
# Fix the cursor theme and touchpad sensitivity
xsetroot -cursor_name Adwaita &
synclient VertScrollDelta=2000 &
exec ck-launch-session gnome-session

New Vision Order - Its All gone horribly wrong!

So I called BT to ask to upgrade to Unlimited Broadband, I have always been thinking about Vision so decided to ask.
The package that was offered seemes a good deal so I decided to take BT up on Vision as well as upgrading to Unlimited Broadband.
I received an activation date of 10th August, my box arrived the previous day. Knowing from when I had my Broadband connected it usually is not activated until about midnight that day, so I decided to wait until to day to set-up Vision.
After following the instructions I was unsuccesful in setting it up, so resorted in calling the helpdesk. I had to call 5 times, I was cut off 4 times!! Finally when I managed ot get a full conversation with someone I was advised that my Broadband Upgrade was delayed so therefore my Vision Activation was delayed.
The lady kindly called the Engineers to see why it was delayed, she informed me that they advised it is delayed as they cannot upgrade my Broadband to 20MB as the Exchange is not being upgraded until October!!
Firstly I did not ask to upgrade to 20MB I just wanted Broadband Unlimited, secondly how can they put an order in to upgrade my Broadband to 20MB when the Exchange is incapable, and thirdly when they realised it was delayed, why did they not inform me it was and the reason, instead of me having to call 5 times.
I now have to wait for them to place another order to fix the mess they created in the first place, I will be checking my Bill carefully when it comes ot ensure they have not started to charge me from the 10th!!
Well rant over, I hope its worth the wait, or the 10 Days cooling off period will be utilised

48hrs has now turned it 76hrs!!! This is a disgrace.
As soon as its switched on Im sending it straight back. BT = **bleep** Terrible.

GT70 20D bios update gone horribly wrong

Hi, I have never ran into issues like this previously, due to a number of problems with issues like the Dragoon software not detecting fan speeds, a number of the MSI apps saying unable to read from BIOS I decided to update the BIOS following the MSI instructions to the letter with the latest update up on the MSI site for the laptop. Well it didn't go well.
Hoping someone can help, my laptop is the GT70 20D with raid 0 configured running windows 8.1 pro, laptop was built with Windows 8 from factory. I booted into the BIOS and performed the UEFI update following these instructions. msi.com/files/pdf/Flash_BIOS_by_UEFI_BIOS_Setup_Utility_en.pdf
I got to stage 12 and the laptop itself powered down and restarted (It didnt get to stage 13 onwards and actually flash it) on the restart I simply get the hard drive light flash once, black screen and nothing. Please help I am in the UK and will be contacting MSI UK during office hours and suspect this might need a RMA but wanting to cover everything myself first, I work in IT and have performed this sort of thing plenty of times in the past and slightly annoyed at the min lol.

Quote from: spthacker on 20-March-14, 14:58:10
Just got my GT70-20D back from MSI after a bad flash, took 27 days in total
I had to pay as they stated that bios is classed as software and not covered by warranty!
you had to pay? is that a joke?
If you flash from their official guide do everything correctly and you brick it because their bios is faulty or motherboard and you have topay for it?
Wow, that is the most insane thing I have ever heard

Bootcamp gone horribly wrong, Mac HD GONE

Similar Messages

Maybe you are looking for