Bootcamp gpu for Mac Pro 1,1

Hi all
Looking for a good Windows only bootcamp gpu for Mac Pro 1,1.
Anyone one have any ideas for a windows gaming gpu that will work well?
Dont need to get latest if the Mac Pro 1,1 slot is limited, but would like to get a better card for Windows games.
Price is not really a problem, more just dont want to spend more if the Mac Pro 1.1 is slot limited.
Thanks very much.

What do you want to use the pc vid card for? Gaming?
If you don't need the best of the best you can get, perhaps just grabbing an apple 4870 might work best.
The $350 might be a little steep, but it might be worth it as you can good graphics in not only windows but mac as well.
You could sell your 1900xt to off-set the price. And then just keep the 7300gt just in case.

Similar Messages

  • Bootcamp on a mac pro

    Hi guys,
    i am trying to install bootcamp on my mac pro, however i only get as far as partitioning and this seems to take hours with no progress on the progress bar.
    It just says 'status partioning disk'
    i am only doing it with 32gb as recommended yet i've tried twice and thought something was wrong after leaving it for 2/3 hours and nothing happening
    is this normal?

    Hi vector meldrew;
    You might have better luck with getting an answer if you post Boot Camp Forum instead of here.
    Allan

  • Is there any thunderbolt card available for mac pro?

    I have a blackmagic intensity extreme, which has thunderbolt port. But I am unable to use it with Mac Pro as there is no thunderbolt port on it. Any suggestions?
    Thanks!

    5kFilmGuy wrote:
    Here's a clue at a Thunderbolt PCIe card that may be available for cpu's with an open 16x slot.
    HP is now offering a Thunderbolt option for thier Z820 workstation model.
    Actually, no. That computer was designed for thunderbolt from the start. It is a feature enabler card, not an expansion card.
    I hope this will change soon, but not soon enough to hold my breath.
    There will never be a thunderbolt card for Mac Pros.
    Two reasons:
    1- Even the 2012 Mac pro used 2 year old hardware, that means even the very last Mac Pro Apple sold last month used 3 year old technology. Its not economical to make new hardware for old technology in a very small market.
    2- Thunderbolt communicates directly with the CPU, GPU and PCIe hardware. That means they have to be designed to communicate with the thunderbolt controller. Since thunderbolt was introduced in 2011, a full year after the last Mac Pro (5,1) was designed, its hardware has no possible way to communicate with it.
    Thunderbolt is not  "an extension of the PCIe bus" like eSATA is an extension of SATA, its an entirely different communication protocol.
    If it were just an extension, it would be far cheaper and easier to implement and there would be more than just a handful of products on the market that support it. Right now thunderbolt is making Firewire look like a runaway success!

  • GeForce 7300 GT Upgrade Kit for Mac Pro?? G5?

    Hi,
    Just found this on the apple store:
    http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=1643C421&nplm=M A567
    "NVIDIA GeForce 7300 GT Graphics Upgrade Kit for Mac Pro"
    Why is it only for mac pro? its PCI express & my g5 is one of the late 2005 models and it has PCI Express so am i wrong in thinking that this should work fine or is it something to do with the new intel architecture?
    If i remember correctly i could have chosen this card or a very similar one when i configured my G5.
    Thanks

    That card is only for the Mac Pro, as it says.
    When you ordered your G5, you had the choice of the nVidia 6600 (or 6600LE), nVidia 7800GT, or the Quadro FX 4500.
    The 7800GT that you could have ordered with your G5 is close in performance to the ATi X1900XT that is an option on the Mac Pro. The 7300GT that you're looking at is an entry level card, which the 7800GT definitely is not.
    The 7300GT and the X1900XT are both Mac Pro only due to the ROM on the card, which is designed to work with the EFI booting hardware that the Mac Pro uses. The G5s used Open Firmware, which requires a different ROM on the video card. So, even though both your G5 and the Mac Pro are PCI-Express based, these video cards are not compatible.
    Now, most PCI-Express cards that you look at for, say, external SATA, will probably work in both the G5 and the Mac Pro. You'd still want to check the specs to be sure, however.
    If you're looking for a new video card to replace your (presumably) nVidia 6600, your only real option is the ATi X1900 G5 edition. This is a different card than the X1900XT that's offered for the Mac Pro.

  • ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

    I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
    I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

    A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
    from: http://en.wikipedia.org/wiki/HDMI
    You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

  • "fire wire" video capture cards for mac pro

    ....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
    acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

    Your question doesn't make much sense.
    What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
    Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
    Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
    Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

  • Reviews for ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro?

    There's no review at the Apple Store on this [ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro (Early 2009 or Early 2008)|http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMx OA]. Googled and found nothing related to the Mac kit. Mostly PC based.
    Should I consider this card? I need a spare/replacement graphics card for my Mac Pro (early 2008). The NVIDIA GeForce 8800 GT card has failed me twice.

    Just came out on barefeats:
    http://www.barefeats.com/nehal14.html
    Shows new drivers with 285, also compares 4870.
    If you play a lot of games on the windows side, you might also want to consider the 4890. I has recently became flashable (if you're into that kinda thing). It has a lot more leeway to be overclocked. Close to (or if your lucky) hitting the 1 Ghz core clock speed, gives very close comp to the 285, and at fraction of the price. You can get an XFX 4890 on newegg for $195.

  • Accessories for Mac Pro

    Hi, guys. I have a problem here. I am looking for something that can protect against dust or something like that. Because my room is really not that clean, which means there's a lot of dust. I am worrying about the Mac Pro that will "eat" some dust. Question is " Where can I buy that kind of accessories for Mac Pro, like clothing or case?"
    Thanks a lot. Oh, I forget there is also a LED cinema display that need to be protected

    Clean your room. Nah, J/K
    (no, but seriously...clean your room)
    Here are some neat looking ACD covers.
    http://www.radtech.us/Products/iMacDesktop/
    I guess you could also use this: (temporarily)
    http://www.flickr.com/photos/neilchristie/3515875014/

  • What is the best software for home office for mac pro ?

    What is the best software for home office for mac pro ?

    Mac-HaBu X 12.2.0.3.841
    Gnucash 2.4.11
    QuickBooks Pro 2013 14.0.3 R4
    MoneyWorks Gold 6.1r5
    MoneyWorks Express 6.1.r1

  • Printer wireless for Mac Pro and  I pad.?

    Need to get a printer wireless for Mac Pro  also can be use with the IPad  this is possible? Thank  you

    Any of the current HP e-Print capable printers support AirPrint capabilities without even having to enable the e-Print stuff that's purely HP.
    Also, make sure your exisiting network router at home supports multicast protocols.  The majority of retail routers support this and you won't have issues, but I've run into problems with carrier issued modem/router combo units from Comcast made by Arris that don't support multicast and other protocols and hence, will not allow for the necessary discovery protocols for AirPrint to work across the wired or wireless network.  In cases like that, the fix is to place those units in "bridge mode" and then use your own router behind it that doesn't restrict that capability.  Just FYI.

  • Is AirPlay Mirroring available for Mac pro?

    Is AirPlay Mirroring available for Mac pro?
    Need to share my MAC screen with apple TV display and eliminate the cable.

    It's a glaring omission in my view, but Apple's focus seems to be on phones and tablets not OS X.
    Send some feedback:
    http://www.apple.com/feedback/appletv.html

  • Where can I find internal DVD replacement for Mac Pro 2008?

    My optical DVD drive on my Mac Pro (3,1) has been dead for a good long while. 
    Looking for a cheap replacment.  Just saw OWC stopped carrying them.  Any leads?

    For Mac Pro 3,1 and earlier (2008 and previous) you need an IDE/ATA drive like this one:
    http://eshop.macsales.com/shop/superdrive/Mac_Pro_Xeon

  • Is it possible for Mac Pro 724 Windows xp to install?

    Is it possible for Mac Pro 724 Windows xp to install?

    I really don't like any "closed" or sealed technology.
    About half way down the page are bare 2.5" enclosures for $50 range
    http://eshop.macsales.com/shop/firewire/add-ons-and-hubs/enclosure-kits
    http://eshop.macsales.com/shop/firewire/on-the-go
    Grief! Yes, that is costly "solution" I looked on Amazon for USB2 for SATA drives and $40.
    For that kind of price, MacGurus specializes in some hot-swap FW/USB/eSATA cases so you can use it with multiple drives (giant floppy).

  • Can a shell for mac pro 13" be used with a mac pro Retina ?

    Can a shell for mac pro 13" be used with a mac pro Retina ?
    Thank you.

    No.
    The entire enclosure is tuned for both external jack placement, EMI-RFI radiation, airflow, and for cooling. You need exactly the correct shell and fans for the electronics you wish to install in it.

  • Any recommendations for a new Graphics card for Mac Pro?

    Any recommendations for a new Graphics card for mac pro edit in Premiere 2014 and I need to have   output to a monitor my current graphics card is ATI Radeon HD Graphics 5870 1024 MB I find better for what I need?

    Look at this EVGA card for the Mac

Maybe you are looking for

  • IPhone 3.0 and ACID3 Test

    Very disappointing, I upgrade my iPhone 2G to 3.0 last night and ran the ACID3 test again (see http://acid3.acidtests.org/ ), as iPhone 3.0 was released after Safari 4.0 was released for Tiger, Leopard, Snow Leopard, and Windows, and Safari 4.0 gets

  • How to make different events with different colors on calendar, on my new iPad

    how to make events on calendar with different colors ?

  • Error: ActiveX Component Can't Create Object

    When I run the ADI on Windows Server 2003R2, it show following error when startup: Error connecting to Language Object, defaulting to US English. Error: ActiveX Component Can't Create Object Anyone know how to fix it? Many thanks in advance. Regards,

  • WRT160N v3 Incomplete Firmware Download Issue

    Using a wired connection I ran the firmware upgrade process.  Downloaded firmware Ver.3.0.03 Build 3  07/12/2010 from cisco/linksys site.  Mid way through the download, the process halted and exited.  Only way to access the router was via the setup C

  • I need to set a MySql password

         I need to set a password for the root user and create a second user account and set that password in MySQL 5.5.16 on my 10.6.8 mac mini.  I know NOTHING about Terminal so I need super detailed. step by step instructions.  I need to know exactly