Bootcamp install failed

Just tried installing Windows XP through Bootcamp and the installation froze when I got the option to press enter to install Windows or Quit etc. I had to power down because the keyboard was not allowing me to input anything. When I restarted, I got a black screen with a message saying insert bootable disk. I restarted, holding down option and it then gave me an option to boot from my Mac system disk which I did and all seemed OK. I then decided to restore the Windows partition back to a single Mac partition and again, everything seemed OK and when I rebooted, it booted up as a Mac, however, today, I've just booted up and got the black screen asking for a bootable disk again!
I realize that my problem may have been that I tried installing from a full windows installer disk SP1 and the recommendations are SP2 minimum.
My problem is the black screen with 'insert bootable disk', why would I keep getting this message if I've destroyed the Windows partition?
Many thanks
Mark
PS. I vowed never to install Windows on my Mac, but my PC laptop packed in!!!

no problem!
I've been trying hard to squeeze windows onto my imac for the last week or so. What error did you get when you tried to boot into windows?
Back up everything and try it again if you want - follow the normal steps using bootcamp assistant.
When in the windows xp blue setup part - make sure you format the bootcamp drive NTFS (not quick). If you don't get that option let me know as I'm working on a guide for getting around that problem.
After you've formatted the drive and it still doesn't work - i'll get back to you with the finished guide.
let me know

Similar Messages

Bootcamp Install Fails - Does not Reboot

Hi,
When installing windows7 64bit via usb using bootcamp, it is successful at partitioning, but does not reboot when necessary. No message is displayed indicating that bootcamp failed. When I manually restart the OS, it simply restarts in OSX. Why am I having this problem? And how can I manually force it to resume?
Thanks,
Domenic

I should also mention, I have a 3rd hard disk with Windows XP installed (all of these are internal in the MACPRO). The same thing is now happening there as I have just checked. The Bootcamp control panel does not instigate to boot into Mac OS X either. So how can I get this control panel to write to the EFI (if this is what it is called?) to boot into the correct selected partitions? I should also mention I can see the Windows 7 and the The Windows XP respectively displayed in there. But I cannot get to boot into either of those either by selecting them from this control panel. It is stuck booting into it's own OS disregarding my selection. I don't think it is 'talking' to the EFI anymore and writing what it should to it (or to bootmgr or something)? What can I do in this case?
What does bootcamp.exe actually do? If I could delete the current list it has stored and get it to rescan even though everything is exactly the same, just reinstalled Mac OS X by erasing the partition on the main drive, which I'm guessing this is why Bootcamp.exe does not write the appropriate command to boot into my OSes?

Win7 Pro x64 bootcamp install fail

I have created a partition using the Bootcamp assistant. (I had problems creating this at first but repaired the permissions and the disk in disk Utility and the partition created fine).
I'm trying to install Windows 7 Pro x64 (from MSDNAA) to my newly created Bootcamp partition (65Gb). The install runs fine until after the restart at the point where the on-screen dialog is "Completing Install". At this stage after a few minutes the laptop freezes and the install never finishes. I have to then hold the power button to gain control of the laptop again and start the process from scratch. I have tried two different CDs of the same OS and the process around 6 times with no luck. I have also tried removing the Windows CD after the first restart has stated on another forum.
Thanks I hope someone out there knows a fix.

Thanks the Hatter but this didnt work unfortunately, i burnt a new copy at lowest possible speed 4x. I cant find any recent information about it. Any more ideas? This is the 64bit version as i want to use all the RAM
Much appreciated

Windows 8.1 bootcamp install fails at NVIDIA Driver Installer

I've been trying to install windows 8.1 natively w/ boot camp on my Macbook Pro Retina, 15", Mid-2012 8gb Ram 2.3GHz.
I had a few issues with partitioning and everything, but eventually got the point where the windows installer ran, allowed me to create my sign in, etc. Then it guided me through the quick boot camp installer for windows. Once this finished, a small window appeared stating to be the NVIDIA Driver Installer. This remained on the screen for a few moments, and then the screen went black and remained so permanantly. On a cold restart and reboot to the Windows drive, it starts right back up in to this black screen. I've already tried to clean install Windows 8.1 again, same problem.
Thanks for your help!

Welcome to Apple Support Communities
If you can use Wi-Fi before installing the Boot Camp drivers, I recommend you to install the most recent NVIDIA driver from the NVIDIA website first > http://www.geforce.com/drivers/results/73784
The Boot Camp installer installs an older version, so if you are having problems, it is better to install the most recent version, so the NVIDIA driver installation step will probably be skipped.

Bootcamp firmware fails to install

When I got my mac mini, the first thing I did was to install all updates suggested by the software updater. This includes a firmware SMC update which came around the same time as OS X .7 I believe.
After this I wanted to install bootcamp and this required a specific firmware to be installed. Went through the installer and at the end it shut down the mini and after starting it up again, I briefly see the firmware update progress bar below the apple before it restarts again.
However - after system boot, the firmware installer launches again and reading through the text, I learn that this happens when a firmware install fails. Bootcamp backs this by asking me to upgrade my firmware when I try to run it. After a couple of equally fruitless attempts I give up.
I suspect the firmware update fails because of the newly downloaded firmware update being of a higher version number than the one I'm trying to install.
Therefore I try to restore my firmware via the firmware restoration CD, but in stead of an SOS flash as the guide (http://docs.info.apple.com/article.html?artnum=303469) expects, I get a beep and a reboot after the rapid flash.
That leaves me fresh out of ideas.

DOH! Sorry... I missed that in your first post.
Your Milage May Vary and Use At Your Own Risk.
I'm hoping for another update to enable the VT as its disabled on my new (one week old) Mini. So perhaps that will load onto yours.
Can you bring it into an Apple store for them to look at it?
Sorry... I'm just no help at all...
Greg

Bootcamp Assistant fails - manually installing support software not an option

Bootcamp Assistant fails when it gets to the downloading support software stage.
I've seen other messages here saying there's a workaround that means manually downloading and installiing the support software. This doesn't work for me as the option to NOT automatically download and install the software is greyed out in Bootcamp Assistant. Why is that? Can I change it? If not are there other workarounds?

Thank so much for your response. In reply I should say that erasing the Macintosh HD partition (using the disk utility application - Photo Below) and re-installing the OS X wasn't any help.
I also would like to clarify my understanding of your first paragraph, if you suggested that the issue could be related to my superdrive? Also would like to ask for further instruction on creating a thumb drive .
In the end I would like to thank you for your advice on the required partition size for windows installation.

Can no longer boot to MacOSX after bootcamp install

Hello all, I have an issue to where I can no longer boot into the Mac OSX partition after what appears to be a failed Windows bootcamp install. As I was running the bootcamp assistant process, a reboot occurred and I was greeted with the "No bootable device -- insert boot disk and press any key". I have no idea how to get past this and boot back to OSX.
Things I have tried:
Holding down the "option" key does nothing, even using a USB keyboard
Resetting PRAM (CMD + OPT + P + R) does nothing, even with USB keyboard
I have put in a MAC OSX 10.7 Disk and cannot boot to disk using CMD + C on startup
I also pulled the hard drive out and connected it to another PC and wiped the drive completely. I put it back in the macbook and I am still presented with this error. It seems, even though I get the Mac startup tone, that it is stuck in which ever OS it tried to run previously, that being Windows. Not sure why I am still receiving this error even after wiping the drive completely clean.
As far as hardware goes, I am pretty sure its a late 2010 Alumn. Macbook Pro. I cant get the current model number since I cant boot the OS. Any help is appreciated.

Please reset SMC as well.
You can get the serial number from the back cover and use https://selfsolve.apple.com/agreementWarrantyDynamic.do to find the model.

Windows 7 install failing on brand-new Apple-replaced harddrive

I just got my (8-week-old) computer back from Apple, with a brand new hard drive. Before restoring all my files, I figured I'd get Boot Camp installed so the partitions are set, etc.
Every time I try, the Windows 7 install fails about 10% of the way in, with either a 0xC0000005 error (installation sources are unaccessible) or a 0x80070005 error (the only Apple support document about this talks about an upgrade from Vista, which isn't what I'm doing).
Reading posts, I disconnected my USB hub, and this time I got a BSOD with this error:
iRQLNOT_LESS_OREQUAL
In between tries, I used Disk Utility to remove the boot camp partition, and reset my Mac partition to use the whole drive, so that I could start cleanly with Boot Camp Installer. The one time I tried to launch in Windows and repair, it brought me to the "click any key to launch from DVD" but hitting a key did nothing.
I've installed Boot Camp and Windows 7 twice before with this install DVD, and multiple other times with other DVDs/computers.
Ideas? I'm thinking there's something other than a bad hard drive that was wrong with my computer.

Only by either installing Windows on your iMac as a separate partition through Bootcamp, or setting up a virtual Windows machine via the likes of VMWare Fusion, or Parallels Virtual or Desktop.
Factor in the cost of Windows and I think you'll find a new copoy of Mac Photoshop Elements would be cheaper.
You could also try the excellent Graphic Converter from lemkesoft, or the open-source Gimp,

Lion install fail on my macbook "a recovery service cannot be created" please help!

Trying to install lion on my Macbook but keep getting install fail error saying a recovery service could not be created"
I have a usb hard drive connected with time machine and a bootcamp 12 gig partition with windows XP
Please help its driving me mad!

managed to do the upgrade by deleting my bootcamp partition with windows xp on it. Think it was this making it unable to create the recovery partition.
However after doing the upgrade I was not impressed with Lion at all! Although it had new features it was running far slower and took ages to boot and shutdown and applications took ages to load and got loads of "spinning discs" waiting for stuff to load which never had before as this is a new Macbook with 4GB of ram.
Anyway after reading people with similar problems made a Lion install disc from the original download and did a clean install and restored my system.
What a difference! Vast improvment in speed and loading and performance! Thank goodness!
Just thought I'd share!

Bootcamp assistant fails to launch

Bootcamp assistant fails to launch. Tells me I need to update my firmware. But I have already upgraded the firmware! Trying to run the SMC firmware updater again does not let me proceed because... the mac is already updated!
MacBook Pro 1.83 Ghz
Mac OS X 10.4.6
1GB RAM
80GB HD
All updates up until 6/8/06 installed, permissions checked.
Also, Parallels Desktop RC2 does not recognize the CD/DVD-ROM drive (error message says it cannot read data from it) and therefore cannot proceed with Windows XP SP2 Installation. The drive works flawlessly with all other apps.
A FileMaker Pro-based runtime accounting solution installs but unexpectedly quits the nanosecond after I double-click to open it.
Photos keep disappearing from the iPhoto libary. After successful importing, blank placeholders appear instead of the imported photos after relaunching iPhoto.
This MacBook Pro has been an unmitigated disaster thus far...

You are making the risky assumption the firmware was not properly installed. How can one not install the firmware correctly? I simply responded to the software update notice, downloaded the firmware, and installed it. The process was almost automatic. How can there possibly be any user error involved?
I believe I installed the firmware properly. If I try to install the firmware again, I get a message that the MacBook Pro is already updated with the correct firmware. In spite of this, Bootcamp keeps telling me I need to update the firmware, refusing to launch, hence the frustration.
This is not actually mine, but a friend's computer. I doubt AppleCare is valid for a computer purchased in Greece, but we'll try contacting the local distributor. It is a 900 number...

Install Failed: OS X could not be installed on your computer.

So my Macbook was bought last December 2012. It's specs should be able to run Mavericks.
I've downloaded the software already, so far so good.
When installation starts, it fails and I get this message:
"Install Failed: OS X could not be installed on your computer. OS X can't be installed on the disk because a recovery system can't be created. Visit www.apple.com/support/no-recovery to learn more"
Now it tells me to go to this page:
http://support.apple.com/kb/HT4649
Then I find the message above and tells me to go here:
http://support.apple.com/kb/TS3926
Then I try the solution in the 2nd link and still the installation fails.
Please note that I have a Windows 7 BootCamp Partition that I would as much as possible not delete or reformat as I have too many important stuff there.
Any ideas?

.Impact wrote:
Philly_Phan wrote:
.Impact wrote:
Philly_Phan wrote:
My WAG is that you have a HD space limitation. I've never used Boot Camp so bear with me. Is there any way that you could back up the contents elsewhere so that you can reformat and repartition?
I have an External Hard Drive here but it's currently being used as storage space for some of my media. Is it possible to backup to a partition of an external hard drive?
I've never done it but it should be possible. Don't forget that a "partition" acts like a real drive and it is a real drive in every sense of the word except that it shares a physical disc with another drive.
Will try that once I get home from University later. Should I back up both OS X and Bootcamp into the hard drive or just one of them? Then reinstall Mountain Lion, then install Mavericks? Did I get that right?
I don't see any reason why you need to reinstall Mountain Lion. It's been a long time since I've done any partitioning but, if I remember correctly, you can enlarge the main partition provided that there is no data in the secondary (Boot Camp) partition. If I'm correct, you'd need to first back up Boot Camp, then erase the original BC partition, then resize the partitions and finally load Mavericks.

Trying to install Mountian Lion onto Macbook Pro and Install failed because a recovery system can't be created What do I do?

My Macbook Pro is set up to run Windows via bootcamp and I am trying to install Mountain Lion.
I cant install and has come up with an error message telling me Install Failed because it cant create a recovery system. I am not very technical and can just about spell 'Mac' so I need help
Thanks

Installer reports "This disk cannot be used to start up your computer"

Component SMS_Contol_manager and SMS_Notification_server install failed on SCCM2012

we have try to uninstall client and remove the ccm namespace from wmi, and reisntall MP, no luck
below log from mpmsi.log.lasterror
=== Verbose logging started: 8/27/2014 20:50:23 Build type: SHIP UNICODE 5.00.9600.00 Calling process: H:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (9C:58) [20:50:23:592]: Resetting cached policy values
MSI (c) (9C:58) [20:50:23:592]: Machine policy value 'Debug' is 0
MSI (c) (9C:58) [20:50:23:592]: ******* RunEngine:
           ******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (9C:58) [20:50:23:592]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (9C:58) [20:50:23:592]: Grabbed execution mutex.
MSI (c) (9C:58) [20:50:23:594]: Cloaking enabled.
MSI (c) (9C:58) [20:50:23:594]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (9C:58) [20:50:23:594]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (24:FC) [20:50:23:598]: Running installation inside multi-package transaction h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
MSI (s) (24:FC) [20:50:23:598]: Grabbed execution mutex.
MSI (s) (24:48) [20:50:23:599]: Resetting cached policy values
MSI (s) (24:48) [20:50:23:599]: Machine policy value 'Debug' is 0
MSI (s) (24:48) [20:50:23:599]: ******* RunEngine:
           ******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (24:48) [20:50:23:599]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (24:48) [20:50:23:603]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (24:48) [20:50:23:605]: SRSetRestorePoint skipped for this transaction.
MSI (s) (24:48) [20:50:23:606]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (24:48) [20:50:23:607]: File will have security applied from OpCode.
MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi' against software restriction policy
MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi has a digital signature
MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi is permitted to run because the user token authorizes execution (system or service token).
MSI (s) (24:48) [20:50:23:619]: MSCOREE not loaded loading copy from system32
MSI (s) (24:48) [20:50:23:621]: End dialog not enabled
MSI (s) (24:48) [20:50:23:621]: Original package ==> h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
MSI (s) (24:48) [20:50:23:621]: Package we're running from ==> C:\Windows\Installer\6257f6f.msi
MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (24:48) [20:50:23:626]: Machine policy value 'TransformsSecure' is 1
MSI (s) (24:48) [20:50:23:627]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisablePatch' is 0
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (24:48) [20:50:23:627]: Transforms are not secure.
MSI (s) (24:48) [20:50:23:628]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log'.
MSI (s) (24:48) [20:50:23:628]: Command Line: CCMINSTALLDIR=h:\Program Files\SMS_CCM CCMSERVERDATAROOT=h:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE
CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=H:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=6556
MSI (s) (24:48) [20:50:23:628]: Product Code passed to Engine.Initialize:           ''
MSI (s) (24:48) [20:50:23:628]: Product Code from property table before transforms: '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
MSI (s) (24:48) [20:50:23:628]: Product Code from property table after transforms: '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
MSI (s) (24:48) [20:50:23:628]: Product not registered: beginning first-time install
MSI (s) (24:48) [20:50:23:630]: Machine policy value 'DisableMsi' is 1
MSI (s) (24:48) [20:50:23:630]: Product {6CED3AB0-05AF-4C81-8DBE-A62661C26F40} is not managed.
MSI (s) (24:48) [20:50:23:630]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (24:48) [20:50:23:630]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (24:48) [20:50:23:630]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (24:48) [20:50:23:630]: Adding new sources is allowed.
MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (24:48) [20:50:23:630]: Package name extracted from package path: 'mp.msi'
MSI (s) (24:48) [20:50:23:630]: Package to be registered: 'mp.msi'
MSI (s) (24:48) [20:50:23:631]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (24:48) [20:50:23:631]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (24:48) [20:50:23:631]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (24:48) [20:50:23:631]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (24:48) [20:50:23:631]: Running product '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}' with elevated privileges: Product is assigned.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'h:\Program Files\SMS_CCM'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'h:\Program Files\Microsoft Configuration Manager'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'H:\Program Files\Microsoft Configuration Manager\bin\x64'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '6556'.
MSI (s) (24:48) [20:50:23:631]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is 'd8d0cefc1249514889002637bb750a41'.
MSI (s) (24:48) [20:50:23:632]: RESTART MANAGER: Session opened.
MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (24:48) [20:50:23:632]: TRANSFORMS property is now:
MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (s) (24:48) [20:50:23:633]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
MSI (s) (24:48) [20:50:23:639]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (24:48) [20:50:23:642]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (24:48) [20:50:23:645]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (24:48) [20:50:23:648]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\6257f6f.msi'.
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi'.
MSI (s) (24:48) [20:50:23:648]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (24:48) [20:50:23:648]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (24:48) [20:50:23:648]: Machine policy value 'DisableRollback' is 0
MSI (s) (24:48) [20:50:23:648]: User policy value 'DisableRollback' is 0
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 8/27/2014 20:50:23 ===
MSI (s) (24:48) [20:50:23:649]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (24:48) [20:50:23:649]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (24:48) [20:50:23:649]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (24:48) [20:50:23:649]: Doing action: INSTALL
Action start 20:50:23: INSTALL.
MSI (s) (24:48) [20:50:23:650]: Running ExecuteSequence
MSI (s) (24:48) [20:50:23:650]: Doing action: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933
MSI (s) (24:48) [20:50:23:650]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
MSI (s) (24:48) [20:50:23:650]: PROPERTY CHANGE: Adding System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933
Action ended 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
MSI (s) (24:48) [20:50:23:651]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
MSI (s) (24:48) [20:50:23:651]: PROPERTY CHANGE: Adding SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3
Action ended 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3'
MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3.
MSI (s) (24:48) [20:50:23:652]: Doing action: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3
Action ended 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3'
MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3.
MSI (s) (24:48) [20:50:23:653]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
MSI (s) (24:48) [20:50:23:653]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (24:48) [20:50:23:653]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (24:48) [20:50:23:653]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (24:48) [20:50:23:654]: Doing action: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
Action ended 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
MSI (s) (24:48) [20:50:23:655]: Doing action: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
Action ended 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
MSI (s) (24:48) [20:50:23:655]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
MSI (s) (24:48) [20:50:23:655]: PROPERTY CHANGE: Adding System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
MSI (s) (24:48) [20:50:23:655]: Doing action: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2
Action ended 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
MSI (s) (24:48) [20:50:23:656]: Doing action: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2
Action ended 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
MSI (s) (24:48) [20:50:23:657]: Doing action: LaunchConditions
Action ended 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
Action start 20:50:23: LaunchConditions.
MSI (s) (24:48) [20:50:23:657]: Skipping action: CcmSwitchToRepairMode (condition is false)
MSI (s) (24:48) [20:50:23:657]: Doing action: AppSearch
Action ended 20:50:23: LaunchConditions. Return value 1.
Action start 20:50:23: AppSearch.
MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:659]: PROPERTY CHANGE: Modifying CCMINSTALLDIR property. Its current value is 'h:\Program Files\SMS_CCM'. Its new value: 'C:\Windows\CCM\'.
MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\CCM\Embedded 3: 2
MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\Software\Microsoft\CCM\Logging\DebugLogging 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\IIS 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:661]: Skipping action: CcmAbortIfEmbeddedExists (condition is false)
MSI (s) (24:48) [20:50:23:661]: Doing action: CCPSearch
Action ended 20:50:23: AppSearch. Return value 1.
MSI (s) (24:48) [20:50:23:661]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (24:48) [20:50:23:661]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 20:50:23: CCPSearch.
MSI (s) (24:48) [20:50:23:661]: Doing action: RMCCPSearch
Action ended 20:50:23: CCPSearch. Return value 0.
MSI (s) (24:48) [20:50:23:662]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (24:48) [20:50:23:662]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 20:50:23: RMCCPSearch.
MSI (s) (24:48) [20:50:23:662]: Doing action: ValidateProductID
Action ended 20:50:23: RMCCPSearch. Return value 0.
Action start 20:50:23: ValidateProductID.
MSI (s) (24:48) [20:50:23:662]: Skipping action: CcmSetInstallDir32 (condition is false)
MSI (s) (24:48) [20:50:23:662]: Doing action: CcmSetInstallDir64
Action ended 20:50:23: ValidateProductID. Return value 1.
MSI (s) (24:48) [20:50:23:663]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDir64'
MSI (s) (24:48) [20:50:23:663]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\Windows\CCM'.
Action start 20:50:23: CcmSetInstallDir64.
MSI (s) (24:48) [20:50:23:663]: Doing action: CcmSetInstallDirFromCmdLine
Action ended 20:50:23: CcmSetInstallDir64. Return value 1.
MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDirFromCmdLine'
MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Modifying TARGETDIR property. Its current value is 'C:\Windows\CCM'. Its new value: 'C:\Windows\CCM\'.
Action start 20:50:23: CcmSetInstallDirFromCmdLine.
MSI (s) (24:48) [20:50:23:664]: Doing action: CcmSetPrimaryFolder
Action ended 20:50:23: CcmSetInstallDirFromCmdLine. Return value 1.
MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetPrimaryFolder'
MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Adding PRIMARYFOLDER property. Its value is 'TARGETDIR'.
Action start 20:50:23: CcmSetPrimaryFolder.
MSI (s) (24:48) [20:50:23:665]: Doing action: FindRelatedProducts
Action ended 20:50:23: CcmSetPrimaryFolder. Return value 1.
Action start 20:50:23: FindRelatedProducts.
MSI (s) (24:48) [20:50:23:665]: PROPERTY CHANGE: Adding SMSSP1COLOCDOWNGRADE property. Its value is '{8864FB91-94EE-4F16-A144-0D82A232049D}'.
MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectUnsupportedUpgrade (condition is false)
MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectDowngrade (condition is false)
MSI (s) (24:48) [20:50:23:666]: Skipping action: CcmDetectUnsupportedUpgrade (condition is false)
MSI (s) (24:48) [20:50:23:666]: Doing action: SmsDetectColocationDowngrade
Action ended 20:50:23: FindRelatedProducts. Return value 1.
MSI (s) (24:48) [20:50:23:666]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SmsDetectColocationDowngrade'
Action start 20:50:23: SmsDetectColocationDowngrade.
MSI (s) (24:48) [20:50:23:666]: Product: ConfigMgr Management Point -- A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
Action ended 20:50:23: INSTALL. Return value 3.
Property(S): UpgradeCode = {ABD0F60F-1622-4311-8989-106B60D784FF}
Property(S): TARGETDIR = C:\Windows\CCM\
Property(S): ALLUSERS = 1
Property(S): ErrorDialog = ErrorDialog
Property(S): ProductName = ConfigMgr Management Point
Property(S): ProductCode = {6CED3AB0-05AF-4C81-8DBE-A62661C26F40}
Property(S): PackageCode = {5CBAF9F8-A298-49C0-B874-D0F5F0F39DB4}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 5.00.7804.1000
Property(S): ProductLanguage = 1033
Property(S): SMSCWSREGKEYNAME = MPCWSPath
Property(S): CcmCheckRepairNotInstalled_ActionText = Abort repair if the product has not been installed.
Property(S): CcmSwitchToRepairMode_ActionText = Product has been installed. Switch to repair mode for this installation.
Property(S): CcmSuppressReboot_ActionText = Suppress machine reboot after installation.
Property(S): CcmCheckFreeDiskSpace_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmCheckFreeDiskSpace2_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmSetInstallDirFromCmdLine_ActionText = Property custom action for setting install directory from command line.
Property(S): CcmCreateWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmCreateWmiNamespaces.
Property(S): CcmCreateWmiNamespaces_ActionText = Creates the WMI namespaces found in the CcmWmiNamespace table
Property(S): CcmCreateWmiNamespacesRollback_ActionText = Calls CcmRemoveWmiNamespaces. Deletes the WMI namespaces.
Property(S): CcmRemoveWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmRemoveWmiNamespaces.
Property(S): CcmRemoveWmiNamespaces_ActionText = Deletes WMI namespaces.
Property(S): CcmRegisterWmiMofFilesInit_ActionText = Queues MOF files in the CcmWmiMofFile table to be compiled.
Property(S): CcmRegisterWmiMofFile_ActionText = Compiles MOF files that were queued by CcmRegisterWmiMofFilesInit.
Property(S): CcmWmiRollback_ActionText = Deletes the existin site policy config and then recompiles MOF to restore old WMI instances.
Property(S): CcmDeleteWmiBackup_ActionText = Deletes the back up mof of the wmi namespace created for rolling back purposes.
Property(S): CcmRemoveWmiObjectsInit_ActionText = Queries the CcmWmiObject table for WMI objects to be removed.
Property(S): CcmRemoveWmiObjects_ActionText = Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmRemoveWmiObjectsRollback_ActionText = Calls CcmRemoveWmiObjects. Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmCreateIISVirtualDirectoriesInit_ActionText = Processes the CcmIISVirtualDirectory table and passes that information to CcmCreateIISVirtualDirectories to create the virtual directories.
Property(S): CcmCreateIISVirtualDirectories_ActionText = Creates the virtual directories specified in the CcmIISVirtualDirectory table.
Property(S): CcmRollbackIISVirtualDirectories_ActionText = Calls CcmRemoveIISVirtualDirectories. Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectories_ActionText = Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectoriesInit_ActionText = Queries the CcmIISVirtualDirectory table for IIS Virtual Directories to be removed.
Property(S): CcmCreateIISApplicationPoolsInit_ActionText = Processes the CcmIISAplicationPool table and passes that context to CcmCreateIISAplicationPools custom action.
Property(S): CcmCreateIISApplicationPools_ActionText = Creates the application pools specified in the CcmIISAplicationPools table.
Property(S): CcmCreateIISApplicationPoolsRollback_ActionText = Calls CcmRemoveIISApplicationPools. Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmRemoveIISApplicationPoolsInit_ActionText = Queries the CcmIISApplicationPool table for IIS Application Pools to be removed.
Property(S): CcmRemoveIISApplicationPools_ActionText = Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmDetectFilesInUseRemoveInit_ActionText = Detect if files are in used at uninstallation.
Property(S): CcmDetectFilesInUseInit_ActionText = Detects file in use.
Property(S): CcmDetectFilesInUse_ActionText = Moves files that are in use so that they will be deleted upon the next reboot.
Property(S): CcmDetectFilesInUseRollback_ActionText = Rolls back files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseCommit_ActionText = Commits action of CcmDetectFileInUse. After this we cannot rollback.
Property(S): CcmDetectFilesInUseRemoveRollback_ActionText = Calls CcmDetectFilesInUseRollback. Rolls back the files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseRemoveCommit_ActionText = Calls CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this the action cannot be rolled back.
Property(S): CcmLookupAccountNames_ActionText = Looks up the name of the Administrators group, Users group, and Creator Owner account, then sets the properties CcmAdministratorGroupName, CcmUsersGroupName, and CcmCreatorOwnerAccountName.
Property(S): CcmRegisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be registering a performance counter.
Property(S): CcmRegisterPerfCounters_ActionText = Registers performance counters gathered in the CcmRegisterPerfCountersInit action
Property(S): CcmUnregisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be unregistering a performance counter.
Property(S): CcmUnregisterPerfCounters_ActionText = Removes performance counters gathered in the CcmUnregisterPerfCountersInit action
Property(S): CcmRegisterPerfCountersRollback_ActionText = Rolls back any changes made by CcmRegisterPerfCounters if install fails.
Property(S): CcmUnloadWmiProvidersInit_ActionText = Enumerates component table and builds a list of files that will be installed
Property(S): CcmUnloadWmiProviders_ActionText = Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them.
Property(S): CcmTypelibRollbackInit_ActionText = Queues a list of type libraries to be registered on rollback.
Property(S): CcmTypelibRollback_ActionText = In the event of install failing, this event rolls back the type libraries to the state before install started.
Property(S): CcmSetObjectSecurityInit_ActionText = Queries the CcmObjectSecurity table and passes this information to CcmSetObjectSecurity.
Property(S): CcmSetObjectSecurity_ActionText = Applying security permissions
Property(S): CcmSetInstallDir32_ActionText = Property action for setting installation directory for Configuration Manager Client on 32-bit platform.
Property(S): CcmSetInstallDir64_ActionText = Property action for setting installation directory for Configuration Manager Client on 64-bit platform.
Property(S): CcmSetPrimaryFolder_ActionText = Property action for setting target installation folder.
Property(S): PRIMARYFOLDER = TARGETDIR
Property(S): VersionNT64 = 603
Property(S): CCMINSTALLDIR = C:\Windows\CCM\
Property(S): System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\system32\
Property(S): SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\SysWOW64\
Property(S): CCMEXECFILEKEY = [#CcmExec_exe.A6940213_CD40_4753_8BA2_E803376DECC3]
Property(S): CcmDetectUpgradeOldClient_Message = A previous version of the Configuration Manager Client is installed. Please upgrade the client to Configuration Manager 2012 before attempting to upgrade.
Property(S): SmsDetectUpgradeOldMP_Message = A previous version of the Configuration Manager Management Point is installed. Please upgrade the management point to Configuration Manager 2012 before attempting to upgrade.
Property(S): SmsDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Management Point is installed before upgrading Configuration Manager Client.
Property(S): CcmDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Client is installed before upgrading Configuration Manager Management Point.
Property(S): CcmAbortIfEmbeddedExists_ActionText = Abort installation if the Configuration Manager Client Embedded version is installed.
Property(S): CcmRegisterHostingConfigurationInit_ActionText = Gathers configuration for Configuration Manager Client service to be registered on the system.
Property(S): CcmRegisterHostingConfiguration_ActionText = Register configuration for Configuration Manager Client service.
Property(S): CcmRegisterHostedApplicationsInit_ActionText = Gathers hosted out-of-proc DCOM applications running inside of Configuration Manager Client to be registered on the system.
Property(S): CcmRegisterHostedApplications_ActionText = Register hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRegisterHostedApplicationsRollback_ActionText = Rollback the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRemoveHostedApplicationsInit_ActionText = Prepare to remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRemoveHostedApplications_ActionText = Remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRegisterEndpointsInit_ActionText = Gathers information such as log file name on each endpoint to be registered on the system.
Property(S): CcmRegisterEndpoint_ActionText = Registers endpoint gathered in the action CcmRegisterEndpointsInit with WMI.
Property(S): CcmRegisterEndpointRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint.
Property(S): CcmRemoveEndpointsInit_ActionText = Gathers information for each endpoint to be removed from the system.
Property(S): CcmRemoveEndpoint_ActionText = Removes endpoint gathered in the action CcmRemoveEndpointsInit with WMI.
Property(S): CcmRegisterSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRegisterSystemTask.
Property(S): CcmRegisterSystemTask_ActionText = Registers a System Task with WMI.
Property(S): CcmRegisterSystemTaskRollback_ActionText = Rolls back the changes made by CcmRegisterSystemTask.
Property(S): CcmRemoveSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRemoveSystemTask.
Property(S): CcmRemoveSystemTask_ActionText = Deletes a System Task from WMI.
Property(S): CcmRegisterProduct_ActionText = If product is registered in MSI database, then product is registered with WMI.
Property(S): CcmRegisterProductRollback_ActionText = Calls CcmUnregisterProduct. Deletes the instance from the WMI in the Configuration Manager namespace using the ProductCode instance in the session.
Property(S): CcmUnregisterProduct_ActionText = Deletes the instance from WMI in ccm namespace using the ProductCode instance in the session.
Property(S): CcmRegisterComponentsInit_ActionText = Generates the list of components for CcmRegisterComponets action to register.
Property(S): CcmRegisterComponents_ActionText = Registers components passed in from CcmRegisterComponentsInit
Property(S): CcmRegisterComponentsRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
Property(S): CcmUnregisterComponentsInit_ActionText = Generates the list of components for CcmUnregisterComponets action to unregister.
Property(S): CcmUnregisterComponents_ActionText = Unregisters components passed in from the action CcmUnregisterComponentsInit.
Property(S): CcmSetupLoggingInit_ActionText = Gathers log file information from the LogFile table and passes this information to CcmSetupLogging.
Property(S): CcmSetupLogging_ActionText = Sets component logging information in WMI.
Property(S): CcmStopService_ActionText = Stops the ccmexec service.
Property(S): CcmStopServiceRollback_ActionText = Calls CcmStartService. Starts the ccmexec service.
Property(S): CcmStartService_ActionText = Starts the ccmexec service.
Property(S): CcmClearServiceSetupStamp_ActionText = Clear the time stamp for blocking the ccmexec service from starting up during upgrade.
Property(S): CcmSetServiceConfigInit_ActionText = Gathers ServiceData and then queues actions CcmSetServiceConfig and CcmMigrateMessagingQueues.
Property(S): CcmSetServiceConfig_ActionText = Sets WMI ServiceRootDir and configures CCMEXEC service.
Property(S): CcmConfigDCOMInit_ActionText = Processes the CcmDCOMAplication table and checks to see if the DCOM Component is being updated. If so, passes that information to custom action CcmConfigDCOM.
Property(S): CcmConfigDCOM_ActionText = Configures registry key permissions for the DCOM Components passed from CcmConfigDCOMInit.
Property(S): CcmFixupServiceConfigInit_ActionText = Gathers the services or load ordering groups which must be started before ccmexec starts.
Property(S): CcmFixupServiceConfig_ActionText = Sets the services or load ordering groups which must be started before ccmexec can be started.
Property(S): CcmRemoveService_ActionText = Removes BITS jobs and deletes the messaging queues.
Property(S): CcmRemoveLanternDocuments_ActionText = Removing documents from Microsoft Policy Platform that have been submitted by Configuration Manager authority.
Property(S): CcmSetPortConfigInit_ActionText = This custom action specifies the port the client should use when communicating with the management point and the server locator point.
Property(S): CcmSetHttpsConfigInit_ActionText = This custom action configures the https port and http state.
Property(S): CcmPreserveLastStateSerialNum_ActionText = Custom action to preserve last state message serial number.
Property(S): CcmInitializePolicyInit_ActionText = Gather default policy information.
Property(S): CcmInitializePolicy_ActionText = Sets and initializes default policy.
Property(S): CcmMigratePolicySettingsInit_ActionText = Custom action to schedule the deferred execution of CcmMigratePolicySettings custom action.
Property(S): CcmMigratePolicySettings_ActionText = Compiles Mof file to migrate root\ccm\Policy namespace schema from Pre-V4 Beta2 to V4 and above.
Property(S): CcmMigratePolicySettingsCommit_ActionText = Just deletes the temporary MOF file.
Property(S): CcmMigratePolicySettingsRollback_ActionText = Just deletes the temporary MOF file. Actual Rollback is done by the rollback action that rollbacks root\ccm namespace.
Property(S): ExpandCcmExecFileKey_ActionText = Property action for setting CcmExec file key.
Property(S): CcmMinAppVersion = 5.00.7000.0000
Property(S): CcmMaxAppVersion = 5.00.9000.0000
Property(S): SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\SysWOW64\
Property(S): System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\system32\
Property(S): SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\SysWOW64\
Property(S): System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\system32\
Property(S): USELEGACYSTATEMESSAGESTORE = 1
Property(S): CcmValidateCustomWebSite_ActionText = This custom action validates that either the custom website or default website (if a custom website is not specified) can be used.
Property(S): CcmValidateServerConfig_ActionText = Validates that IIS, BITS and WebDAV is installed and properly configured setup.
Property(S): CcmLookupIISAnonymousAccountName_ActionText = Looks up the IIS AnonymousUserName and then sets the IISAnonymousUserAccount property to this value.
Property(S): CcmSetServiceMPConfigInit_ActionText = Gathers Incoming and Outgoing directories and virtual directories for the MP. Queues the action CcmSetServiceMPConfig.
Property(S): CcmSetServiceMPConfig_ActionText = Sets Incoming and Outgoing directories and virtual directories in WMI.
Property(S): CcmSetServerDataRoot_ActionText = Property action for setting service data root folder.
Property(S): CcmSetServerDataRootInstallDir_ActionText = Property action for setting service data folder.
Property(S): CcmIncomingVDirName = CCM_Incoming
Property(S): SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\SysWOW64\
Property(S): System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\system32\
Property(S): CCMSERVERDATAROOT = h:\Program Files\Microsoft Configuration Manager
Property(S): CcmSystemVDirName = CCM_System
Property(S): CcmSystemRegVDirName = CCM_System_WindowsAuth
Property(S): CcmSystemAltAuthVDirName = CCM_System_AltAuth
Property(S): SMSCACHEDIR = Default
Property(S): SMSCACHEFLAGS = Default
Property(S): DISABLESITEOPT = Default
Property(S): DISABLECACHEOPT = Default
Property(S): SMSCACHESIZE = 5120
Property(S): SmsShellNotify_ActionText = Notifies the shell for the file-association icon changes.
Property(S): CCMINSTALLMSMQ = FALSE
Property(S): CCMINSTALLMP = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): ARPNOREMOVE = 1
Property(S): ARPNOMODIFY = 1
Property(S): CCMENABLELOGGING_Default = FALSE
Property(S): CCMLOGLEVEL_Default = 1
Property(S): CCMLOGMAXSIZE_Default = 2000000
Property(S): CCMLOGMAXHISTORY_Default = 1
Property(S): SecureCustomProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;SMSUPGRADEPRODUCTS;CCMSERVERDATAROOT;SMSUPLEVELPRODUCTS;USESMSPORTS;SMSPORTS;CCMHTTPPORT;SMSSP1COLOCDOWNGRADE;USESMSSSLPORTS;SMSSSLPORTS;SMSSSLSTATE;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSFWKUPGRADEFROMPREV4;CCMFWKUPGRADEFROMPREV4;CLIENTFWKUPGRADEFROMCM2007;SMSCWS;CCMSHAREMODE
Property(S): AdminProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;CCMSERVERDATAROOT;CCMALLOWSILENTREBOOT;CCMHTTPPORT;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSCWS
Property(S): CcmDefaultPolicyAuthorityPriority = 10
Property(S): SmsDetectColocationDowngrade_Message = A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Property(S): SmsDetectColocationDowngrade_ActionText = Detect if a newer version of the Configuration Management Client is installed before installing the Configuration Manager Management Point.
Property(S): SmsDetectDowngrade_ActionText = Check if a newer version of the Configuration Manager Client is already installed.
Property(S): SmsMpRepairSucceeded_ActionText = Sends a wmi event to indicate MP repair succeeded.
Property(S): SmsDetectMSXMLRebootRequired_ActionText = Tries to create an instance of SAXXMLReader to determine if a reboot is required.
Property(S): SmsMpSetDefaultPolicyAuthority_ActionText = Set default policy authority for the Configuration Manager Management Point.
Property(S): SmsMpSerializedKeyExist_ActionText = Wait for the Configuration Manager Management Point serialized key to exist.
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Cancel = &Cancel
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_OK = &OK
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_No = &No
Property(S): ButtonText_Yes = &Yes
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Exit = &Exit
Property(S): FilesInUse_Info = Setup has detected that it needs to update some files that are currently in use by other processes.
To prevent having to reboot the machine, please close the following applications:
Property(S): DefaultUIFont = DefaultDlgFont
Property(S): DialogBox_Title = ConfigMgr Management Point Setup
Property(S): WelcomeDialog_Info = This will install the ConfigMgr Management Point.
Property(S): InstallDialog_Title = Install
Property(S): InstallDialog_SubTitle = The product is now ready to install
Property(S): InstallDialog_Info = Click Next to proceed.
Property(S): ProgressDialog_Title = Please Wait
Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
Property(S): CompleteDialog_Title = Setup Complete
Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
Property(S): CompleteDialog_Info = Setup was successful.
Property(S): UserExitDialog_Title = Setup Aborted
Property(S): UserExitDialog_SubTitle = Setup was cancelled
Property(S): UserExitDialog_Info = The ConfigMgr Management Point setup was cancelled.
Property(S): InstallErrorDialog_Title = Setup Aborted
Property(S): InstallErrorDialog_SubTitle = Setup failed
Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\SysWOW64\
Property(S): System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\system32\
Property(S): SMSSP1COLOCDOWNGRADE = {8864FB91-94EE-4F16-A144-0D82A232049D}
Property(S): MsiLogFileLocation = h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): USESMSPORTS = TRUE
Property(S): SMSPORTS = 80
Property(S): USESMSSSLPORTS = TRUE
Property(S): SMSSSLPORTS = 443
Property(S): USESMSSSL = TRUE
Property(S): SMSSSLSTATE = 0
Property(S): CCMENABLELOGGING = TRUE
Property(S): CCMLOGLEVEL = 1
Property(S): CCMLOGMAXSIZE = 1000000
Property(S): CCMLOGMAXHISTORY = 1
Property(S): CURRENTDIRECTORY = H:\Program Files\Microsoft Configuration Manager\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 6556
Property(S): MsiRestartManagerSessionKey = d8d0cefc1249514889002637bb750a41
Property(S): VersionDatabase = 200
Property(S): MsiSystemRebootPending = 1
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): MsiNTSuiteDataCenter = 1
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 5372
Property(S): VirtualMemory = 4017
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 1033
Property(S): ComputerName = [servername]
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 20:50:23
Property(S): Date = 8/27/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): DATABASE = C:\Windows\Installer\6257f6f.msi
Property(S): OriginalDatabase = h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
=== Logging stopped: 8/27/2014 20:50:23 ===
MSI (s) (24:48) [20:50:23:717]: Note: 1: 1708
MSI (s) (24:48) [20:50:23:717]: Product: ConfigMgr Management Point -- Installation operation failed.
MSI (s) (24:48) [20:50:23:718]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (24:48) [20:50:23:721]: Deferring clean up of packages/files, if any exist
MSI (s) (24:48) [20:50:23:721]: MainEngineThread is returning 1603
MSI (s) (24:FC) [20:50:23:725]: RESTART MANAGER: Session closed.
MSI (s) (24:FC) [20:50:23:725]: No System Restore sequence number for this installation.
MSI (s) (24:FC) [20:50:23:726]: User policy value 'DisableRollback' is 0
MSI (s) (24:FC) [20:50:23:726]: Machine policy value 'DisableRollback' is 0
MSI (s) (24:FC) [20:50:23:726]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (24:FC) [20:50:23:727]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:58) [20:50:23:728]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:58) [20:50:23:728]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/27/2014 20:50:23 ===

A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
Action ended 20:50:23: INSTALL. Return value 3.
The installer certainly thinks that you still have a previous ConfigMgr client installed. Perhaps you haven't completely removed it. Use ccmclean.exe from the SMS 2003 tool kit.
If that fails, why not just rebuild the server - you've said that this is a fresh install. I don't like too much messing at the beginning. This can be difficult enough - you need to start with a clean installation of the product.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

ProClarity 6.3 PAS install fails on Windows Server 2012

We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
Kevin

I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas

G5 10.5.8 Combo Update codec overrun - install fails

Hi,
I still have my first mac, a Power Mac G5, but it has been acting as a center speaker stand for some time now. A couple of years ago it started playing up, I spent hours and pounds trying to fix it, gave up and bought a shiny new iMac. So with the festive season upon us and orders to tidy up, I thought I'd have one last try at fixing it before turning it into a drinks cabinet.
As I recall, it all started to go wrong one day when I tried to download a large update to something. When I tried to install the update I got a Codec Overrun error and/or a Corrupt File message. As it stands today the machine is running a clean install of OSX 10.5.6 and I am failing to install the MacOSXUpdCombo10.5.8.dmg upgrade. I currently have 2 copies of the update.
One copy on the desktop was downloaded directly from the Apple support site. The .dmg opens and verifies OK and I can launch the MacOSXUpdCombo10.5.8.pkg. This runs through the installation sequence, past the password but finally comes up with an error message "Install Failed. The installer could not validate the contents of the 'MacOSXUpdCombo10.5.8' package. Contact the software manufacturer for assistance."
Another copy in my downloads folder, put there by the Software Updater, doesn't get that far. It comes up with "Warning,The following disk image failed to mount. Image - MacOSXUpdCombo10.5.8.dmg, Reason - codec overrun."
So far I have tried:-
Memory - run third party memory checker application (can't remember which one) and found no faults.Tried different set of memory cards
Hard disk - run all the disk check and repair utilities, re-formatted, repartitioned. Tried a different hard disk.
OSX 10.5.6 - reinstalled from original disks several times.
MacOSXUpdCombo10.5.8 - downloaded via Software Updater process and direct from Apple Support website. Downloaded via wi-fi, ethernet, different Mac, different PC. Always get the exact same file size.
Resetting the PRAM etc
New standby battery
Installing in Safe Mode
Swearing.
None of this has worked. I get some different error messages but they are all variations of "codec overrun", "corrupt file" or "Install failure"
Anyone got any other ideas? Or should I just get on with the drinks cabinet conversion?
Thanks

That message isn't a space available message. If you bring up Disk Utility, how does it say the partition is formatted, ie, partition format, write status, and partition map scheme? Assume SMART status is verified, yes?

Bootcamp install failed

Similar Messages

Maybe you are looking for