BootCamp issues on Macbook Pro Unibody

Hi!
Recently I installed WIndows XP with service pack 3. The thing is that I weren't able to install all devices. There were two that had been left out and marked as yellow. The first one is "smbus" and the second one is, roughly translated from swedish, "Mathprocessor". I don't know the correct name on english for that device. How can I install those two?
Best Regards
Message was edited by: mäC.

http://www.nvidia.com/object/nforcewinxp20.08.html
^ you can try to install the smbus driver that comes with the nforce set I linked to above.
instead of running the installer like normal, open the .exe in a program like winzip or 7-zip and extract the SMBUS folder to your desktop. In device manager, select the smbus and choose update driver. tell it to look in the folder on your desktop.

Similar Messages

Macbook Pro Unibody 2008 sleep issue

I have a Macbook Pro Unibody 2008 and I have noticed an issue when closing the lid and putting the computer to sleep. Sometimes it will go to sleep successfully but some other times it won't. If it fails to go to sleep the fans kick in after a while and the computer becomes unresponsive, it won't wake up again and I have to turn it off by pressing the power button for a few seconds. When I turn it on again it shows the white screen without the apple for a while, then restarts by itself once more and then shows the apple and boots normally. Upgrading to Lion from Snow Leopard did not make any difference.
The worst part about this issue is that sometimes I won't notice the computer hasn't gone to sleep and I will put it in my carrying bag to go somewhere and when I open the bag again I find that the fans are working at full speed and the computer has reached ridiculous temperatures. One time it got so hot I could barely touch it with my hands! I am quite surprised it was not damaged by the excessive heat...
Does anyone else have this issue? Are there any solutions?

Try resetting your computer's SMC:
http://support.apple.com/kb/HT3964
If that doesn't resolve the issue, you may want to download and install AppleJack, a free, open-source utility that runs in Single User Mode and that has sorted out occasional problems with sleep, failure to shut down, etc. on my machines.
http://applejack.sourceforge.net/

Late 2008 MacBook Pro unibody - Hard Freezes under Vista 32bit

Hi folks,
I am a relatively new Mac fan (started a few years ago when I purchased a Mac Mini for home because I didn't want to suffer Windows at home as well as at work!)
Anyhoo, late last year I purchased a MacBook Pro Unibody jobbie so that I could have the best of both worlds for my work. I can run Visual Studio under Vista for C++ development under boot-camp and run the Mac and OSX for just about everything else.
However: I have a problem that is testing my patience to brand new levels. In summary:
About once every couple of hours or so (and it's not reliable: could be after 30 seconds, could last several hours) Vista freezes. And I mean freeze: it takes a "hold the power button down" routine to get out of it. This, of course, has made Vista and lots of my work pretty upset. There's nothing quite like writing to a file when this happens for maximum tears. I'm running through tissues like you'd never believe
I have done some research on this over the months and have tried many possible solutions including, but not limited to, ensuring that I'm fully patched up and that there is no suspicious software, updating all the drivers (paying particular attention to NVIDIA's ones - as a DirectX/OpenGL programmer for the past 10 years I'm acutely aware of how touchy they are). None of these have worked.
The closest I've come to something that looks like a solution is this thingie called Riva Tuner; but it does not recognise the April 2009 NVIDIA drivers.
I understand that it could be linked with something NVIDIA's drivers do to speed up/slow down the cards depending on load/heat/whatever.
I'm so far down my tether at this point I really do not know where to turn. I love my MacBook, but I need Bootcamp and Vista to do my job. It was my choice to get a Mac rather than a PC, so I guess it's my own fault. I have seen many other users on the Internet who have the same problem but none of them appears to have a fool-proof resolution to this issue.
Thus, I thought I'd come here, get my best begging trousers on and grovel to Apple and to the learned users here to see if there is something that I can do to get everything working again so that I can continue to bask in the MacBook Pro glory knowing that my Vista installation is reliable.
Grovelling over,
Mr Cuttle.
Message was edited by: Mr Cuttle

Do you have anything against running Windows in a VM (virtual machine) under OSX to do your work? On the unibody, this is much more stable than boot camp in my experience.
here are the steps I took
1) install smcfancontrol in OSX
http://www.eidac.de/
2) install virtualbox free virtualization software from Sun Microsystems
http://download.virtualbox.org/virtualbox/2.2.2/VirtualBox-2.2.2-46594-OSX.dmg
3) install Windows using virtualbox like normal; use smcfancontrol to bump fan speeds if it runs hot (normally not needed unless you watch video or game).
4) turn on seamless mode and run your windows apps side by side with OSX apps for free.
if you have issues setting it up, read here:
http://www.virtualbox.org/manual/UserManual.html
this video shows how it works, albeit with a weird Japanese game app instead of Visual C++
http://www.youtube.com/watch?v=Z47MKa9Jdwk
and this screenshot that I took shows just how much you can do with this:
http://img505.imageshack.us/img505/5916/picture1zdk.png

ACD 30" Dual Link DVI and MacBook Pro Unibody

I have the following configuration:
ACD 30" Dual Link DVI and MacBook Pro Unibody
I am exhibiting some intermittent problems with the 30" display not coming up when I reboot for example and here are some more:
1. MacBook Pro not in clam-shell mode and restart equals 30" display not turning on
2. When in Snow Leopard and I have the MacBook Pro running in clam-shell mode and I open the display on the MacBook Pro it remains black.
3. When waking the MacBook Pro from sleeping (MacBook Pro in clam-shell) the 30" ACD is "grainy" and the display is not usable and it requires a reboot to solve the problem.
Any help? In addition are there any other displays using mini-display port to mini display port technology?
What about a different monitor; will I still have to use the Dual Link DVI adapter to drive a display with higher than 1920x1200 resolution?
Are there adapters to go from mini-display port to display port?
Thanks,
Mike

Just came across your post and i have a couple of suggestions ive noticed with the Dual-Link to Mini-DP with the same configuration.
When working in clamshell mode for example, the 30" will become the MAIN/Default display...So if you open your macbookpro while the 30" is on and the system is running, the screen will remain black because it is in closed mode; basically meaning there is no signal to be sent.
so if you want the display to show up, either restart or put into sleep mode, then wake the system WITH THE LID OPEN.
As for the grainy/static artifacts, its beena reported issue since day 1, not sure waht the fix or issue may be with it but heres a resolution.
Press; SHIFT CONTROL EJECT-KEY all at once, this will disable signal to the monitor, but not shut off the machine...then use your mouse or press a key on the keyboard to wake the display and the grainyness should disappear.

Cannot Daisy Chain My External Hard Drives on Macbook Pro Unibody

I have a 2010 Macbook Pro 13.3. I am trying to daisy chain my 2 external hard drive enclosures to my firewire 800 port. The enclosures are manufactured by Vantec, model Nextar 3. Both devices have 2 firewire 400/800 ports and they advertise that they are able to be daisy chained.
My issue is: I hook one to the other and power them both on and nothing seems to happen. I can power one up and the drive will show up on my desktop, but when I power the second drive up, I get the pop up screen saying I have disconnected my device without properly shutting it down, and then the drive is gone. I have tried connecting them several different ways. Im not sure if its the external enclosures, if there is a process I'm supposed to follow, of if the Macbook Pro Unibody does not support daisy chaining firewire 800 devices.
Please, if anybody has had the same experience and has been able to fix it, let me know. I am in need of some serious hard drive spance and am going to return both enclosures if I cannot get them to work.
Thank you.

I'm having the same issue.
I'v also found that I am able to daisy chain other drives throught the vantec drives.
And that, when I get the pop up screen saying I have disconnected my device without properly shutting it down, and the drive is gone. I'm only able to remount the drive after restarting the computer while the drive is conected and powered. It won't apear on other computers untill the reboot sequence is preformed.
Strange,
Let me knwo if you've found a solution.
thanks,
joe

Logic Pro, MacBook Pro (unibody) and M-Audio Midiman Midisport 8x8/s

Can anyone tell if if they have gotten Logic Pro running on a MacBook Pro (unibody) to work with the M-Audio Midiman Midisport 8x8/s MIDI interface? I can't seem to get AMS to see the interface.
If I boot into Vista using bootcamp, it works fine.
If I plug the interface into a PC first and then move it to the Mac without power cycling it, it works fine until I cycle power on the interface or the Mac.
Should I give up and buy a different multiport MIDI interface? If so, which one works best?
thanks,
-John

You must have missed it.
http://www.m-audio.com/index.php?do=support.drivers&k=driver&s=4&p=f808e3999ca85 171bc6c92b8be1d6e2f&o=41&f=676
offers support for both PPC and Intel Macs.
I use it all the time when I travel. Cool and uncomplicated device.
Best,
sonther

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

Detecting airport card in MacBook Pro unibody Mid 2009

I own Mid 2009 Macbook Pro Unibody. Airport was working fine, but now says No Airport card installed. Curious how I can check harware is present(no loose card). I saw other software related suggestions but did not resolve.
Shouldnt the airport card be listed under System Profiler --> Hardware ?
I see Airport under System Profiler --> Network, but only Software version details are present.
Many Thanks!

I have a 15.4" 2.66GHz Mid 2009 MBP on 10.6.1 and I am having a similar problem. I honestly do not recall having the issue before installing Snow Leopard. The problem I have is it seems whenever it first wakes from sleep I can instantly use the keyboard and enter my password to unlock it but the touchpad is almost completely unresponsive for the first 5 - 10 seconds then it starts responding some, but like was mentioned if I swipe with 2 fingers it seems to respond as it should with just 1 finger. After approx 1 minute or so it seems to fully wake up and then my touchpad works normally from then on. So it seems to only happen when first waking from sleep.

MacBook Pro Unibody (late 2008) crash when using GeForce 9600M GT

Every time I do heavy 3D rendering or play 3D games (such World of Warcraft) with the NVIDIA GeForce 9600M GT, after few minutes my MacBook Pro (unibody, late 2008) freezes, black screen and audio looping, no actions possibile, only hard shutdown... No problems with the 9400M.
What should I do? Get a replacement?

I've had mine for a little less than two months and I noticed the overheating shortly after I got it. I think it's mostly because the fans don't spin up soon enough because the SMC controller on mine does not work properly and even if you reset it, it reverts back to only spinning the fans after a cpu/gpu temps over 90 degrees Celsius (almost boiling point!).
Mine is currently in for service but I'm being told that they haven't been able to duplicate the issue so I don't understand what method of testing they are using. I hope they don't keep my computer in repair for a long time. I know that if I fire up the Black & White 2 Demo, Call of Duty 4, or Spore and play for about 10-20 minutes the computer crashes if the fans don't spin up... Apple released a firmware update for the SMC controller but it doesn't apply to my model which is a MacBookPro 5,1 , maybe Apple doesn't realize yet how widespread the fan problem even on the late 2008 model is but it needs to be resolved and a third party utility to control the fans should not be necessary on the finest laptops available on the market. I'm confident that they will come up with something...
http://discussions.apple.com/thread.jspa?messageID=9115055&#9115055

Macbook Pro Unibody 2008 freezes when switching video cards

I hava a Macbook Pro unibody late 2008 running Snow Leopard and I have noticed that whenever I switch from one video card to another the system completely freezes after a while. It does not happen while doing something specific or intensive. It seems to be completely random. I have searched in forums and found out that other users are experiencing the same issue but I have found no solution yet. Does anyone know of some way to fix this?

Try resetting your computer's SMC:
http://support.apple.com/kb/HT3964
If that doesn't resolve the issue, you may want to download and install AppleJack, a free, open-source utility that runs in Single User Mode and that has sorted out occasional problems with sleep, failure to shut down, etc. on my machines.
http://applejack.sourceforge.net/

Can you swap an SSD from a MacBook pro C2Duo to an MacBook pro unibody

I have a very trusty 17" MacBook pro core 2 duo that's due for an upgrade. Is it possible to swap my current SSD from my MBP C2D to my new 17" MacBook pro unibody? Im thinking there might be a problem with drivers? It will save me a lot of hassle trying to reinstall all of my pro apps particularly FCP. If it comes to it I'll have to do a fresh install.
Thanks for any help

You have to install either the current OS that you were using on the new Mac or the version that Came on that new Mac when it was new. Not the OS that was on the drive when it was installed in the older Mac.
If Lion was the pre-installed OS on the new Mac that is what you have to install and there is only one way to do that. That is do use the Lion recovery system to Download Lion from the internet and then install it. Holding down the c key (or Command+c key) would do it.

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

About a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the scre

about a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the screen goes black and I can't go any further. I have tried to re-load the bootcamp drivers and try again. It does the same thing. Any help would be great.

i sue windows 7 and my orignal macintosh formated and get online same window

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

Menu Bar issues on Macbook Pro

I came across this problem with my mac where after logging in I noticed that the menu bar, specifically the battery and wifi icon takes atleast 5-10 mins to appear and when I hover the cursor anywhere on the right side of the menu bar it shows the spinning rainbow. Also the volume button seems to be greyed out as well and usually I have to plug in ear phones and it will go away but only temporarily. This never happened to my mac until today and for some reason I think it has to do with the installation of Adobe CS6 Master Collection. (yes, it was torrented. no, I wont do it again.) I did some slight research and on some website it said that there could be some applications recently installed that could have caused this to happen. If anyone has a solution I would very much appreciate it.

Having the same issue. Macbook Pro 2011, latest Mavericks update ....
Apple menu disappears and reappears when Google Chrome is open/closed. Behaving the same with random programs. Do you have any ideas?? Software is up to date, THANKS!!!

BootCamp issues on Macbook Pro Unibody

Similar Messages

Maybe you are looking for