Bootcamp MacBook Pro 2009 Windows 8.1

Hey Guys
I have a MacBook Pro 2009 which has Mavericks installed. I did have Windows 7 installed also but did a complete upgrade to 8 then to 8.1.
The problem I am having is that I can not install the Bootcamp software at all be it version 4.0.xxxx, 4.1.xxxx, 5.x.xxx or 5.1.xxx.
Every single time I try to install it, I get an error message saying "Bootcamp requires that your computer is running Windows 7"
Any suggestions/help would be greatly appreciated as this is driving me nuts
Thanks Guys
Huza

Hello there, Tonicost.
The following Knoweldge Base article offers up some great and practical information to properly setup Bootcamp on your MacBook:
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/ht1461
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • MacBook Pro 2009 - Window 7 - Low Volume Output

    I am experiencing low volume output on the internal speakers and slightly better volume on headphone output under BootCamp with Windows 7 x64 Ultimate. And of course the red light emitting diode is one constantly in the audio output jack.
    I have seen fixes for the Windows XP folks over time and on my older MacBook (2006) with Vista x64, I found a fix. I have seen some thoughts on installing RealTek HD Audio drivers and that DID NOT work for Windows 7 x64 on my MacBook Pro 2009. I also tried reinstalling the CirrusAudio x64 from the BootCamp 3 drivers on my Snow Leopard DVD.
    So I am left wondering if a driver update is forthcoming or if there is a fix that has been discovered and not reported online yet?

    I'm going to leave this message for reference to other users...
    As of October 22 2009 there is no known fix for the broken Cirrus Logic driver that comes with Bootcamp 3.0 under any 64bit Windows OS (including Windows 7 and Vista).
    Apple seriously ***** for not doing anything about this for MONTHS and has lost a customer forever. I was going to get a 17in to complement my 13in MacBook Pro but this kind of driver issues is just plain unacceptable, and goes to show how you can't rely on a company like Apple for mission critical systems, period.
    If they want to make ANY inroad in the corporate world the better get their stuff together and start delivering, the famous "excellent customer experience" for me is nowhere to be found. Lacking that, mac computers are only pretty although non-functional machines.
    Sorry for the rant... I hope somebody from apple listens, but I doubt it.

  • Bootcamp macbook pro retina windows 8 help

    I am having difficult installing windows 8 on my macbook pro retina. I watched countless youtube videos and read many how to's but I can't figure this out. I bought the USB superdrive, I have a copy of Windows 8 Pro I purchased. I have a 8gb flash as well. I have done so many steps, download Iso for windows 8 (which I am unsure what this is or if I need it) I downloaded drivers and put them on my usb as well. I clicked install the latest windows software from apple. I partitoned to give windows 8 50gb space. Than it restarts and black screen comes up. Sorry for such the long paragraph, but for days I have been stuck.
    Can someone please help me and please explain step by step as if you are explaining it to your grandmother. Lol. I erased my flash drive  and partitian back to only mac, so I will start fresh. Lol Thank you!

    I think I figured it out finally. It's installing windows now.Not sure how to delete my thread but assistance is no longer needed.

  • Can I install only Windows on my Macbook Pro 2009?

    Hello All,
    For reasons far outwith my control. i.e. I am in the middle of borneo, needing desperatly to get on a full windows machine... I need answers to the following?
    I have full gen versions of Windows 7 and MS Office 2010. I want to run these on my 13" MacBook Pro 2009. I know, boot camp, VMware etc are all great. But i can't at this time get those working.
    I think, the best option is to just buy a HDD, remove the old one, install fresh copy (of win) onto new HHD.
    However, my question is - will this work?
    Thanks
    Craig

    As TheSmokeMonster indicated, you'll need to use either virtualization or BootCamp.  BootCamp prepares your system to allow Windows to be installable on it (it also provides the drives for some of the hardware which may not be found elsewhere).  Virtualization runs in OS X, so that should be a non-issue.  Keep in mind, all firmware updates are only via OS X, so you would not be able to update your firmware unless you have a functioning bootable external OS X volume.
    BootCamp does basically give you a full Windows machine... it just allows dual booting between Windows and OS X.

  • MacBook Pro 2009 new hard drive install results in very slow function and freezing

    I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
    Short version:
    I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
    Long version:
    Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
    Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
    I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.

    If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
    http://scsc-online.com/Scannerz.html
    I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
    Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
    I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
    In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case.

  • Headphones not working in bootcamp macbook pro 13"

    i install windows vista business in bootcamp, Macbook pro 13" 2009. The headphone is not working and the speaker is really low. Anyone have the same problem? thank you

    Have you installed the Boot Camp drivers in Windows from the Mac OS X Leopard DVD? If not please try that. Also can you increase or decrease the sound in Windows? Which is the sound output device in the Windows?

  • HOWTO: Low DPC latencies ( 100 us) on bootcamped Macbooks (Pro)

    Here is a small HOWTO for getting the lowest possible DPC latencies (<100 us) on bootcamped Macbooks Pro (late 2008):
    Disclaimer: I did all tests on my late 2008 Macbook Pro Unibody 2.8 GHz model with NVidia chipset and graphic. Most of the following suggestions should apply to standard Macbook models and likely older generation as well.
    First of all Intel Speedstep can lead to dropouts and higher DPC latencies on small load! Unfortunately all tools that are supposed to manually switch Speedstep off don't seem to run on the late Macbooks (Pro) while on OS X you can use "Coolbook".
    Your only way to make sure your processor is clocked high enough and not dynamically switching is to put up a constant load (like running your DAW pretty hot or running Prime95 at "Idle/Lowest" process Priority in the background). I will keep investigating if I can find a tool to switch Speedstep off.
    Most importantly (to get rid of really bad DPC latency spikes):
    Kill the process "KBDMGR.EXE"!
    That's Apple's driver for controlling brightness and keyboard lighting via the function keys and setting tap options for the trackpad. It seems to have broken multithreading!
    You can also change the CPU affinity of KBDMGR.EXE to CPU1 (not CPU0!) which will help decreasing DPC Latencies alot, but there will still be Audio dropouts.
    Here's a small toolkit I put together that allows you to conviniently enable/disable Apple's "Boot Camp" tray application (KBDMGR.EXE) via an icon link and/or keyboard shortcut. Optionally it will switch the function of the F-Keys automatically for you depending on whether Boot Camp is loaded or not.
    Furthermore it automatically turns Boot Camp's CPU priority to "Idle" and CPU affinity to CPU1 in order to turn down the bug induced DPC Latencies and prevent dropouts with Windows sounds and Media Player playback. Professional Audio users will find that only turning off Boot Camp will allow low audio latency usage. Installation instructions are included in the README.TXT for your convinience.
    Boot CampED download page
    Direct Download:
    Boot CampED.zip - 3.3 kb
    Turn off the Broadcom 802.11N WLAN driver via Device-Manager or update to the latest drivers via Microsoft Update Catalog.
    Like on OS X the Airport module can lead to audio dropouts. The DPC Latencies produced by the Broadcom driver are less regular than the KBDMGR thing, alot higher in value. Best thing is to try for your own needs.
    Update:Meanwhile a new Broadcom drivers was published via Microsoft's Update Catalog named "Broadcom - Network - Broadcom 4322AG 802.11a/b/g/draft-n Wi-Fi Adapter " (4322 is the chip used). This one comes with both low DPC latencies and finally the ability to use the full rate upto 300 mbit/s. Go get it! For safety you might still want to turn WLAN off during critical audio work though.
    Change the graphic-card driver to "Standard VGA Driver" via Device-Manager or use RIVATUNER to enforce a fixed clock-rate and performance mode.
    Update:The dynamic clock-rate switching happening with NVidia drivers in order to save power and keep temperatures low leads to extreme DPC spikes for each switch and constantly high DPC latencies when it settles in low performance 2D mode. RIVATUNER's "Enforce Performance Mode" option can be used to set the card to a fixed clock-rate. I recommend using "Low Power 3D" for audio work.
    User of XP might think that they don't need this, but be aware that on XP the NVidia driver keeps running at highest clock-rates in "Performance 3D Mode" all the time. Via RIVATUNER you can switch to "Low Power 3D".
    Turn off the ACPI compliant Battery driver via Device-Manager
    This driver polls the battery for its current load status and produces a small, single, short spike exactly every 15 seconds. In my own tests I found that it doesn't seem to affect low latency audio performance. Furthermore turning it off will remove monitoring of your current battery status. But if you are running on power-chord anyway and want to make absolutely sure you can turn it off.
    All other devices don't add much if anything to DPC latencies, but can savely be turned off if you don't need them (like Nvidia LAN, Bluetooth, Onboard High Definition Audio).
    Attention: Removing the Battery while the power chord is connected results in permanently reduced CPU clock (downto the lowest clock setting possible). According to Apple this is done to prevent overloading the power-supply during heavy load as it needs the assistance of the battery from time to time.

    I'd like to underline that these are workaround. Now that the Broadcom drivers are fixed it is up to Apple to fix KBDMGR and to get the NVidia drivers fixed!
    Furthermore it seems as if only Vista 32-bit and OS X are heavily affected by Intel Speedstep, Vista 64-bit and Windows 7 (32/64) work alot better in this regard. XP is a mixed bag.
    Here are some screenshots to prove that the workarounds do help:
    DPC Latency before applying the workarounds:
    DPC Latency Vista 64-bit (Idle, Speedstep enabled) after applying the workarounds:
    DPC Latency Windows 7 64-bit (Idle: Speedstep enabled) after applying the workarounds:
    As you can see Vista's DPCs run well below 100 us once everything is optimized, Windows 7 is a bit worse, XP is even better. But practically you get the same results when using all three for professional Audio work.
    Message was edited by: T1mur

  • How can i pair my bose soundlink I to my macbook pro on windows 7

    Hi everybody
    I'm looking for solution for pairing my bose soundlink I with my macbook pro on windows 7, 64bit.
    PS: I used bootcamp correctly
    Thank you help and sorry for my english, I'm from french speaking country

    This is purely a Windows issue, follow the Windows instructions for detecting and pairing USB devices. It doesn't matter what it is running on, it's still Windows.

  • I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present.  Need help?

    I have a 13 inch MacBook Pro (2009).  Recently I bought an extended hard drive because I had used up the memory on my iDisk.  As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down.  Once I hooked up my Pro to the power cord &amp; logged in, the "White Screen of Death" appeared on the home display.  Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains.  I need help in determining the cause of this issue &amp; the steps I'll need to take in order to resolve this.  I love my Pro, all my documents, photos &amp; music are on it &amp; the last thing I want to do is kill my wallet by buying a new Pro.  So could someone on here please help me?  It would be greatly appreciated &amp; I thank you in advance!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • Can a macbook pro run windows operating system?

    can a macbook pro run windows operating system like xp, vista or windows 7?

    nathalie1985 wrote:
    Is it best to run Windows 7 in Boot Camp, or would it be better to use VMWare Fusion or similar? I have a MacBook Pro Intel Core 2 Duo (OSX 10.6.8) and I also have a Dell laptop solely because one program that I need to use for work is only available for Windows. I would love to consolidate to my mac but am afraid installing Windows will ruin it!
    It all depends on what your useage of Windows will be, for playing games install it in BootCamp, for word processing, spreadsheets, email. browsing etc a virtual Machne will be fine.

  • Bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)

    bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It is not safe to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Keyboard hangs on MacBook Pro with Windows 7

    I have a 2008 MacBook Pro and Windows 7 RC installed with Boot Camp drivers.
    More and more, the keyboard hangs. Sometimes it does not register a keystroke (for about 1 second), and shortly thereafter it hangs on 1 keystroke (pressing a random key once results in about 30 of that characters on screen).
    I know Windows 7 is still not officialy released, but I do hope this gets fixed in the near future. I have had many Windows 7 installs, including previous versions. They all had the same issue.
    The problem seems to be the Keyboard manager. Windows 7 also reported that this service was using more than usual resources, causing it to be bad for battery life.

    Same problem here. I already installed Windows 7 and then Windows XP to see if this was a Win7 issue but on both OS the issue is occurring.
    Delay with the Keyboard when press a key. Sometimes it writes 30 or more of the same character.
    I can't do the double fingers/right click most of the times since the drives seems to hang and multitouch trackpad stops to recognize the two fingers right click. It eventually come back working OK from time to time and then stops working again.
    Bootcamp 3.0 did not resolve the issue for me under Win XP and Win 7

  • Quickly runs out of battery on macbook pro 2009

    Hi! I have macbook pro 2009. Battery does not hold, quickly runs out of battery. I think, what trouble in battery and recently i replaced her. Problem continues. My mac can work no more than 2 hour. What to do?

    GolfStream585 wrote:
    Sorry, but where "Hardware" in menu ?
    You are in the wrong place.  Click on the Apple in the left corner on your desktop and then click "About This Mac."
    In the next window, click on the More Info button
    Your battery info as previously requested is what we need to see.

  • Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

    When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

  • HT3986 How do I run an external monitor on a macbook pro running windows 7

    How do I run an external monitor on a Macbook Pro running Windows 7

    on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
    windows like osx saw the external monitor and let me clone to it or extend my desktop to it

Maybe you are looking for