[Bootcamp] Neither 32 nor 64 bit drivers are installing

I have a 13 inch mid 2012 Macbook Pro. I'm trying to bootcamp Windows 7 Professional. I have both the bootcamp 5 and bootcamp 4 drivers installed on a USB in seperate folders. When I try and run the setup in windows I get the error message about "the version of this file is not compatible..." If the Bootcamp 5 setup is for 64 bit systems, and bootcamp 4 is for 32 bit, why am I unable to use either of them?

Welcome to Apple Support Communities
Boot Camp 4 drivers are for both 32 and 64-bit Windows versions. However, Boot Camp 5 drivers are newer and are designed only for 64-bit Windows versions.
According to this Apple's article, your Mac supports both 32-bit Windows 7 (with Boot Camp 4) and 64-bit Windows 7 and 8 (with Boot Camp 5). Have you installed a 32 or 64-bit Windows version?

Similar Messages

Unable to load youtube videos. Neither browsing nor the youtube app are working, this hapenned after I updated to iOS6

Unable to load youtube videos. Neither browsing nor the youtube app are working, the video start loading but nothing more happen. This issue is hapenning after I updated to iOS 6.

Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
And then try this.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
And ... Are you using the mobile YouTube website?
http://m.youtube.com/home

Crystal Server 2011 "Failed to open the connection" with 32 & 64 bit drivers are loaded

Brand new installation of Crystal Reports Server 2011 with CR Developer 2011 as well. Downloaded new Postgres and MySQL drivers for both the 32 and 64 bit ODBC definitions. Created a new report on the server to eliminate any migration driver incompatibility issues. Reports run fine in Developer but give the same "Failed to open the connection."
and still problems running the reports If I Save Data with the reports, I can click View to see the data, but they will not refresh.
All the articles I'm finding online seem to point to the issue with needing 32 & 64 bit drivers, but I've loaded both and built my ODBC connections with the 32 drivers in the SysWOW64 folder.
Logged in as Administrator. Any thoughts out there? Are there some new security measures?
Thanks in advance ...

Yes, Designer and CRS are on the same machine.
Good catch with the 5.1 driver. I loaded up the mysql-connector-odbc-5.1.13-win32 driver and used that. It alone failed when I made the ODBC connection with it. I see on the CRS 2011 Feature Pack 3 .pdf file that it says "Only 64-bit database connector middleware is supported" ... I downloaded the other mysql-connector-odbc-5.1.13-winx64 64bit file, but teh .msi and .zip versions failed on the load. Do I need that if it says that or should the first one be enough?
I've been trying to use a normal User DSN, no? Apparently I don't have access as a machine Administrator to do it as I get "You are logged on with non-Administrative privileges. System DSNs could not be created or modified." Having our server guys get that straightened out and we'll see. Had not heard of that actually but will give it a go.
You say I should create the DSN entries in the 64 bit version of the ODBC Data Source Administrator ... located in the system32 folder, not the SysWOW64 folder, where the 32 bit drivers are found, yes? Isn't that the "wrong" location to use I've been reading? Or are System DSNs different from a User DSN?
BIG thanks for the replies. I owe you beers!!!!!

How to find Oracle drivers are installed in WAS

Hi
I am doing Proto type application using webdynpro.I want to create tables in Oracle database,because WAS is installed on Oracle.Now i went to Visual Admin tool and checked the "JDBC Connector" properties.I tried to create the new 'DataSource".While creating DataSource ,it is asking me DriverName,Driver ClassName,Version.I have following questions:
1.How to find the wheather Oracle drivers are installed or not?if not where to get these drivers?
2.Once DataSource is created ,how to test wheater it is working fine or not?please help
Thanks
Prasad

Hello Prasad,
Don't create a new datasource, but create a datasource alias for the existing SAP<sid>DB datasource with your new name.
(remember to restart the j2ee cluster)
Then in your application instatiate the datasource and use your create/update/select statements.
Once this is set up test from your java code as follows:
InitialContext ic = new InitialContext();
DataSource mySource = (DataSource)ic.lookup("java:comp/env/jdbc/YourDataSource");
or.. DataSource mySource = (DataSource)ic.lookup("java:jdbc/YourDataSource"); (can't remember which of the 2 worked)
if this throws a NamingException, then your alias doesn't work, or perhaps you forgot to restart the cluster.
After this executes successfully, use the datasource freely.
Connection con = mySource.getConnection();
con.executeQuery
con.executeUpdate
con.executeStatement
ect...
And forget about oracle, sapdb, informix, db2, or whatever drivers. This makes your application portable and independent from the DB layer.
Please feel free to reward points if this solves your problem.
Best regards,
Homer Vargas

Zen V Plus Not Connected. Saying No drivers are installed for this devi

Hi,?Recently purchased a zen v+ and thought i'd gotten a good mp3 player.got home, charged the player. installed software and got excited to start putting songs on and listening to?it. plugged it in the usb slot and BAM!?"USB device not recognized" so i went into control panel/system/hardware/devicemanager then clicked on uni'versal serial bus controllers and noticed a "unknown device". so i right clicked it and went properties and its saying No drivers are installed for this device. so i went to the driver tab and clicked on driver details and a window popped up saying no drivers are required or are loaded for this device.. then i came to the support page and had a look at some posts and came across http://us.creative.com/support/kb/article.asp?l=2&sid=9287?i read and followed the instructions word for word and still didnt help. went to the creative support downloads page and thought maybe i could download and re-install the drivers for my zen v+ but they had no downloads that related to drivers. Before contacting creative i thought i would come on here and find out if anyone can help.is there a site? or can someone give me a site so i can download the latest drivers for my zen v, i've tried installing them off the cd and it says no new devices found. any help would be greatfully appreciated..thanks for your timebrett?

Hi,
I had a similar problem, try this site
http://blogs.microsoft.nl/tonykrijnen/archi've/2004/2/28/59.aspx
For the English people among us:
Choose Start
Choose Run
Type REGEDIT en geef ENTER
Open:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
With right mouse ENUM and choose Permissions.
Check if there is a group EVERYONE with a 'v' on READ
The same for USB (under ENUM). If the group everybody is not there, create one.
Angele

P6-2022uk - 32 bit system but no 64 bit drivers are available

Hi,
My mother recently asked me to clean up her computer (it was running a little slow). After running several virus scans, scannow, chkdsk etc, no luck so for time contraint reasons I have reformatted the machine and currently in the process of reinstalling the drivers / software she needs.
The Machine is the P6 2022uk - it has a 32 bit setup but your website does not offer the drivers for this, only the 64 bit version.
IS anyone able to help me track down these driuvers? I'm confused as to why all hardware specs I have read for this product state 64 bit - when PC World sold this machine as a 32 bit?
Any help would be appreciated.
Thanks,
Jonathan

Jonathon, welcome to the forum.
According to the specs the original OS is Windows 7 Home Premium (64-bit). Here are the specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03013679
Look at the section titled "Software". This the reason for the 64-bit drivers.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Where are WinXP 32-bit drivers to install CP1518 connected to Win7 64-bit

I have a CP1518ni connected locally via USB to a Win7 64-bit PC. I want to print to this printer from a WinXP 32-bit PC. The printer is shared under Win7. When I try to add a printer under WinXP, is sees the shared printer and asks for the location of the driver. I've downloaded and installed various PCL6 drivers, the Universal PLC6 driver and even inserted the original CD-ROM for the printer. No matter what location I give, it says an appropriate driver is not found. I had no problem when the printer was connected to another WinXP PC, which has now been replaced by a Win7 PC. Is it that a 32-bit PC cannot use the printer when it's connected to a 64-bit PC? I've spent several hours trying to install it and it should not be this difficult. Can someone tell me where I can find the WinXP drivers for a CP1518ni?

A little more progress on this issue: You must install the Universal PCL6 drivers on the Win7 PC, and include the WinXP PCL6 drivers there too. The printer was installed using standard Win7 drivers, which leads to the problem. Now I can install the printer as I normally would on my WinXP PC and it finds the drivers to install. Now the problem is, whenever I print to that printer on my WinXP PC, the queue either shows a print error, or, the print job continually shows it is printing, then spooling, then printing, then spooling, etc. These lines rapidly and alternately flash in the print queue window and the job never prints. I've disabled my WinXP firewall and removed user name/password credentials on the Win7 PC.

Latest Vista 64 bit drivers not install

It don't matter what I do, I cannot get the "SBXF_PCDVTBETA_L3_2_0_0000" drivers working with my X-fi Fatality sound card.
Things I have done:
Turned off the signiture thingy as per the read-me (both at start-up and premient way)
Turned off windows firewall
Turned off Windows Defender
No Antivirus/Firewall/Spyware/Adware protection
Run the file as a normal user and right clicked and selected "run as administrator".
Made sure no previous sound drivers were installed.
As soon as it gets to the "Updating the windows files", I get another box come up:
Creative Device Driver Installation has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avalible.
The only button I have is, close program, I click that and it goes to the audio console. At that stage I cancel the installation because ther sound apps dont work without the sound driver.
So I am left with a very muted PC.
My PC Specs:
Windows Vista Beta 2 5384
AMD Athlon 4000 2.4 Ghz
Asus Geforce 7800GT
2GB of RAM
Proacti've Asus A8n-Sli Deluxe Motherboard
Asus TV card
Creative X-fi Fataty Soundcard
Logitech 2. Speakers
Hopefully somebody can help me out with my issue
Thanks alot
Scott Seggons Message Edited by Seggons on 07-5-2006 09:05 PM

Boot Camp will not support Vista on newer iMacs, you will need to upgrade to Windows 7. Also as an FYI there is a Boot Camp forum, you can locate it by clicking Apple Support Communities and then in the search field type Boot Camp.
Best of luck,
Roger

I have to complain for once... (64-bit drivers are po

As a whole I've had very little issues with Creative cards, other than when I had a poor Via chipset to my socket A computer I've had almost no trouble.
The reason I've been purchasing Creative cards at all has been because I really enjoy EAX audio, especially in dark engine games (thief + 2 + system shock 2).
I've had Li've, Audigy + 2 and now for quite some time X-Fi extrememusic. I only use two channel analog outputs (X-fi digital out seems to distort at times).
Alright, that's a quick recap and something positi've.
Well then, I decided I should try to step into the 64bit world a bit early to see if my work and gaming can be improved by 4GB RAM.
So I try the 64bit Vista Ultimate and all I get out of the audio is noise...at very high levels no matter the sound levels used. Rebooting does not help at all. i've got no room on my motherboard to move the card around to another PCI-slot.
In XP64 Pro, similar problems occur, the sound can be heard but it's extremely noisy. Totally unusable...
Audio in Vista 32bit worked a bit better but I had some other issues with is so I didn't really want to use it, not going to use DX0 for quite some time.
System:
e6300 @ 300 (.275v), Scythe Ninja + Nexus 20, Gigabyte GA965-S3 (bios 8), 4xGB Kingmax DDR800 @ 880 (.8v), x900xt 256MB (Thermalright HR03 + Nexus 20 @ 7v), 2x Samsung t66 500GB, X-Fi extrememusic, 20." Philips 200WP7ES, Seasonic S2 500w
Overclocking has absolutely no effect on the audio problems.
So creative, if you wish to have me as a customer for future needs, work harder on those drivers(!)

Same here. I have 64 bit vista home premium and all I get is loud static /noise from my 5. speaker system. I am using the 2_5_0002 driver. I waited for about 6 freakin months for a?freakin fix just to get a driver with the same exact problems as the last one. I'm about ready to take this POS soundcard out and smash it into my dri'veway with a sledge hammer. By the time the Einsteins here write a driver that works vista will be on its way out!!!!!!! If anybody can recommend a sound card that actually works I'm listening...Message Edited by oldpaint on -04-20070: AM

Getting ROracle run when 32 bit and 64 bit clients are installed

Hello all,
I am using RStudio with R 3.01 (64-bit) on a Windows 7 64 bit installation. I am able to load ROracle when only the 64 bit Oracle Client is installed.
Unfortunately I have to use the 32 bit client for another programme.
After I have installed both clients I can't load the ROracle library anymore in R.
The error message is:
Error in inDL(x, as.logical(local), as.logical(now), ...) :
unable to load shared object 'C:/Program Files/R/R-3.0.3/library/ROracle/libs/x64/ROracle.dll':
LoadLibrary failure: %1 ist keine zulässige Win32-Anwendung.
Error: Laden von Paket oder Namensraum für ‘ROracle’ fehlgeschlagen
I have set both paths in my environment:
"C:\oracle\product\11.2.0\client_1\bin;C:\oracle\product\11.2.0\client_2\bin;"
Could anybody give me a hint what could I try to get it running?
Kind regards,
Uli

Hi Uli,
In addition to adding the 64-bit Instant Client to PATH, did you set the environment variable OCI_LIB64 to the location of 64-bit libraries?
See the ROracle INSTALL instructions for details:
http://cran.r-project.org/web/packages/ROracle/INSTALL
Also see the step-by-step instructions for configuring the Oracle Instant Client for use with ROracle (and ORE) in the Oracle R Enterprise Installation Guide.
Regards,
Sherry

Drivers are installed and configured correctly but PHP can still not find them

Hi,
I am trying to test my application on and IIS/MSSQL setup before trying to deploy it to a customer's site. I have a clean install of IIS, SQL Server and PHP. The Servers appear to be configured correctly. I have downloaded and installed drivers according
to the Microsoft documentation. I have made sure the module is enabled in IIS and the entry isin the PHP.ini file.
Using "PHP -i" in powershell gives:
PHP Startup: Unable to load dynamic library
'C:\xampp\php\ext\php_pdo_sqlsrv_55_nts.dll' - The specified module could not be found.
I am using the PHP from my xampp installation as I need the newer version of PHP to support my application. The PHP version is 5.6.3.
When I try to connect to the database in PHP I get:
#0 CACDB::fail(could not find driver) called at [C:\plato\dal\dbconn.php:24]
#1 CACDB->__construct() called at [C:\plato\dal\dbconn.php:36]
#2 CACDB::Connection() called at [C:\plato\dal\user.php:17]
Thanks in advance,
Dion

You should be able to disable that item in the device manager console?also I'm fairly sure there is a "Stop bugging me about this" option when Vista finds new hardware. Sorry for the vague reply, I'm nowhere near any Vista PC's right now

Windows Deployment Services 2012 - Driver Group filter by Model value not working - Drivers are not installed!

Hi,
I'm using Windows Deployment Services 2012 to deploy Windows 7 Pro x64 driverless images to different hardware models (drivers are injected using WDS). I already have organized the drivers in driver groups per
hardware model. I'm experiencing driver conflicts so I decided to start using driver group filters to make sure that the driver groups are available only available for the corresponding hardware model.
To get the correct values for the filters i have used the following method: (as described in this article: http:// technet.microsoft.com/en-us/library/dd759191.aspx)
so I checked msinfo32.exe
(System Manufacturer: Dell Inc. System Model: OptiPlex 790)
and set these values in the driver group filter:
Then fired up WDS using PXE booting on my OptiPlex but when finished: No drivers are installed! I investigated further and found on forums to use the following commands (which return the same values btw):
wmic bios get manufacturer
(returns: Dell Inc.)
wmic computersystem get manufacturer
(returns: Dell Inc.)
wmic computersystem get model
(returns: OptiPlex 790)
Values are the same so no problem there.
Then I checked the output of the following commands:
wmic bios get model (returned: error, invalid query)
wmic bios get /all (returned: all kind of information but no model value)
When I remove the value "OptiPlex 790" from the filter list the drivers are installed correctly. So this has to be some problem with the Model value.
Could someone please help me?
As a workaround I now disable all the driver groups exept the one that I need for the hardware. But as more new hardware models are added this is a lot of work to do everytime.
Extra info:
I'm using a WINPE 4.0 image (windows 7 media boot.wim file). 6.1.7.601
Windows Server version: Windows Server 2012 - version 6.2 (Build 9200) - All Windows updates are installed
Windows Deployment Services version 6.2.9200.16384
Having this problem on multiple systems
Questions:
- Does WDS/WinPE uses only the Bios values for determining system info? (then this problem could be with Dell in this example, because no model value is available)
- Is this the correct way to set up driver group filters? (then this is a problem with MS. Does anyone have solution??)
Thank you for your answers & help!

Hi Microsoft,
I still have no answer to my Questions.
Thank you for your answers & help!

Black Screen After Windows 8 64-bit Upgrade (Clean Install) on TouchSmart IQ508A (IQ500 series)

Hi there,
Just installed Windows 8 and am getting a black screen after booting up like many others. I currently have disabled the graphics driver and this has solved the black screen issue but I can no longer use my web cam for Skype (although web cam works for W8 Camera App oddly).
To date I have tried the following:
Loading up the latest Nvidia drivers from the Nvidia website
Attempting to use the drivers for Windows 7 both in compatability mode and normally. I unzipped SP44488 to get this working
I know many others are having this problem so I really would like someone from HP to respond and state whether a Windows 8 display driver for the Nvidia GE Force 9300M GS is being developed.
I ran the compatability wizard prior to the clean install and it came up with no issues so I am very disappointed I am having these problems.
I've found out that HP have a customised version of the above card so that explains why the Nvidia drivers dont work so I believe HP is therefore obligated to provide a driver.
If anyone else is having similar issues please respond as this will hopefully lead to more action.
cheers
Steve

I'm in the same boat. On my IQ804, the Nvidia GE Force 9300M GS card crashes when I use NVidia's latest Windows 8 driver and Microsoft's LIVE UPDATE drivers. I have to resort to the Standard VGA driver in order for the pc not to crash into a black screen.
I read on another forum you can try installing a July 2012 version of the driver from NVidia and that should solve the problem. I tried it once. Using the July 2012 version, the screen would stay on longer, but eventually it crashes into a black screen...but definitely more usable than the latest from NVidia and Microsoft.
I too have heard that HP used a customized version of the graphics card and that's why neither HP nor NVidia's drivers work.
I also tried installing the Nvidia GE Force 9300M GS drivers for Windows 7 that I downloaded from the HP website. It didn't work either. It actually failed to install altogether, saying my system is incompatible.
As is, the pc works fine. But videos and games that require motion is noticably choppy.
Any help from HP??

64 Bit Palm Desktop Drivers are HERE!

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices!), drivers for 64bit Vista and Windows 7 operating systems are here! (Note: Neither HP, nor Palm can offer support for this driver since it was supplied by a third-party vendor).
I have just synced my TX to my Vista64 bit laptop successfully via my USB cable!
The drivers are here:
http://aceeca.com/index.php?option=com_maqmahelpdesk&Itemid=5&id_workgroup=1&task=downlo...
An instruction file included with the download.
Basic instructions:
1. Download the drivers and unpack ("Extract" or "unzip") them. Since they come in a .zip compressed file, this is absolutely necessary. Remember the location of this folder you unpacked them to as you will be needing it later on in this install routine.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to Palm Device under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the Aceeca folder you unpacked the drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck! Thanks again to Aceeca and Reb1 for reporting this link here.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manaqer so making the next step quite difficult. This happened to me and after some investigation I discovered the following tip that allows Device Manager to show hidden and nonpresent devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers as in the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1
Post relates to: most Palm devices
Post relates to: Palm III

Some BootCamp drivers are not installing...!?

Hello everyone.
I've recently installed Bootcamp and WinXP Pro x32 on my new MacBook Unibody.
I got a very unpleaseant surprise...
The drivers for the wifi, ethernet, bluetooth, processor aid, chipset and isight are simply NOT installing. I'm getting the "new hardware found" notification every time I boot up, and when I try to upgrade the drivers of these "unknown devices" @ the Device Manager control panel, no adequate drivers are found. I've re-installed the bootcamp drivers that came with my MB like 10 times, with NO luck.
HELP!

I'm having a similar issue...
I don't have access to the Leopard CD, and I'm not paying Apple 12 bucks to ship me the CD I already own just because I left it in my dorm over interterm, but that's neither here nor there. The point is I installed XP, downloaded the drivers and installed them. The only appreciable difference after installing the drives from the installer I downloaded is that there is now the boot camp task bar icon. None of the other drivers got installed, though the installer listed them all and went smoothly.
If it helps any, this is a re-install. I wiped the windows partition clean in Disk Utility and re-installed from the same CD I used before. The only difference is this time I don't have the Leopard DVD to install the drivers from.
Any help?

[Bootcamp] Neither 32 nor 64 bit drivers are installing

Similar Messages

Maybe you are looking for