Bootcamp no longer boots...

Hi there,
The only fundamental change I've made in recent months was to upgrade to OS X Mavericks.
I haven't booted to my Windows 7 partition in some time.
So I did because I needed to upgrade an old Windows-only device. And, lo and behold, Windows 7 doesn't boot. It goes to a black screen (no cursor) and my fans runs overtime for a bit and then dies down again and nothing happens until I restart and hold down my Option key to boot back to the Mac side.
My Mac can see Bootcamp. It's there on the desktop. It can be ssen in Startup Disk. It can be seen on the Option Start side of things. I don't get it.
I am including a screenshot.
I have no idea what's happening. Since it took forever to configure the Windows 7 side of things, I'd really rather not kill it and start over.
Can anybody help?
Screenshot included of my drive via DiskUtility.
Thanks!

I know you said it took you a long time to setup windows 7, but if you haven't used it in many months, I cannot imagine that you really need much on there except that one time you've referenced.
Hope someone can save the partition for you. If not, download your ISO here
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
and open boot camp assistant to remove your exisitng bootcamp. close bca, reopen and reinstall with the ISO.
should take about 30-60min depending on your machine.

Similar Messages

Can no longer boot to MacOSX after bootcamp install

Hello all, I have an issue to where I can no longer boot into the Mac OSX partition after what appears to be a failed Windows bootcamp install. As I was running the bootcamp assistant process, a reboot occurred and I was greeted with the "No bootable device -- insert boot disk and press any key". I have no idea how to get past this and boot back to OSX.
Things I have tried:
Holding down the "option" key does nothing, even using a USB keyboard
Resetting PRAM (CMD + OPT + P + R) does nothing, even with USB keyboard
I have put in a MAC OSX 10.7 Disk and cannot boot to disk using CMD + C on startup
I also pulled the hard drive out and connected it to another PC and wiped the drive completely. I put it back in the macbook and I am still presented with this error. It seems, even though I get the Mac startup tone, that it is stuck in which ever OS it tried to run previously, that being Windows. Not sure why I am still receiving this error even after wiping the drive completely clean.
As far as hardware goes, I am pretty sure its a late 2010 Alumn. Macbook Pro. I cant get the current model number since I cant boot the OS. Any help is appreciated.

Please reset SMC as well.
You can get the serial number from the back cover and use https://selfsolve.apple.com/agreementWarrantyDynamic.do to find the model.

Bootcamp will not boot windows7

After a Mac software update and no other changes, I can no longer boot my Windows 7 partition. When windows can't boot it puts up a screen to troubleshoot and the only error found is: "System files integrity check and repair error code 0x490 According to what I could find online the MBR was somehow corrupted. From the command prompt I tried
BootRec.exe /fixmbr
/FixBoot. Writes a boot sector onto the system partition to start Windows
/ScanOs. Scans all disks for Windows installations and displays them to you.
/RebuildBcd. Scans all disks for Windows installations and prompts you to pick the ones you want to add to the BCD.
All say they complete successfully but Windows still won't boot.
I also tried repair from the Windows 7 installation disk with no success.
Can anyone tell me how to get Windows 7 to boot without having to wipe out the partition and start over? I really don't wnat to have to loose all my data on the Windows partition and have to reinstall.
Thanks

Sorry maybe I wasn't clear in my original post, or maybe I just don't understand the responses. I had a perfectly fine, working bootcamp installation of Windows XP on my MacBook Pro for 2-3 years now. All of a sudden after using the laptop on and off all weekend, Monday morning comes and the black screen comes up. I tried booting up with the windows disk in and tried a repair but that didn't finish. I can't do anything in BootCamp Assistant because of the message that I mentioned. I don't know what else to do from here. I was able to take all of my data off and store it on another drive, so I can, if need be wipe it clean. I'm guessing I'd have to do this on the Mac side as I don't seem to have any other options. It just doesn't make any sense to me that I'd have to start over and reinstall OS X since it seems to be working fine...it just seems like it's BootCamp.
Does this make sense? Any ideas?

HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable? The article referenced is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable? The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
You have two or three options (depending on your Mac Model).
1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
2. Download Software from Apple servers...
3. Install Windows...
Are any additional instructions really necessary?

Made a new partition on Macintosh HD, Boot Camp will no longer boot.

Specs:
MacBook Air 2013
8GB RAM
i7
512GB SSD
Hello all, looking for some assistance.
My HD is formatted to 400GB of OSX and 80GB of Boot Camp. I stupidly made the mistake of adding a new partition out of the large amount of free space I have on the OSX partition, to format the new partition for Windows. This made Boot Camp no longer boot. On the Disk select screen after holding Option on boot, my Boot Camp partition is not visible. I can see everything on the partition on OSX, however.
To try and fix this, I deleted the new partition and tried to reduce the hard drive back to the original two partitions. However, I cannot extend the OSX partition to fill in the new free space. So now I have a Boot Camp partition, my OSX partition, and 20GB of unused, free space that I cannot use or put back into the original partition.
I asked AppleCare live chat for any assistance, they suggested that I use "Erase free space" in Disk Utility to use the space again. However, the option is greyed out on both the drive and the Macintosh HD partition.
After a bit of googling I saw a suggestion of making a USB Recovery drive to get the space back through Disk Utility that way. This still did not work; the results were the same, unable to add the space back to the original partition, and "Erase free space" is still greyed out.
Using BootChamp (notice the H, this is an app that allows you to restart and boot directly into Boot Camp through OSX), I get a DOS screen saying "No bootable device – insert boot disk and press any key". I cannot get this screen any other way.
I have repaired and verified the disk and its permissions, to no avail.
I cannot think of anything else to do short of formatting the entire drive but this is obviously less than preferable. I additionally do not have a backup of the BootCamp partition (as it is not accessible), even though everything is visible on the partition through OSX.
So, in summary, I added a new partition to my HD and now Boot Camp will not boot. Any ideas?

"rEFIt is an alternative bootloader for your Mac that's a lot more forgiving. If you don't think investing in iPartition is worth it, I'd give this a shot:
In rEFIt, do not boot: go to the EFI shell, and type "gptsync". This will tell you that the partition table is out of sync, and will offer to sync it for you. Say "yes", naturally. Now reboot and all systems should be go!"
This worked.

Bootcamp no longer bootable after adding and deleting partitions

I am using a 2014 Macbook Pro with OSX 10.9.5
I was trying to add a partition to install Ubuntu on and after adding and deleting partitions, my bootcamp partition will no longer boot whether I use rEFIt or bootcamp assistant or normal osx boot menu.
Judging from the information I got from similar threads on this I think this information will be useful
Last login: Thu Apr 9 12:05:32 on ttys000
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Malformed MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 490234751
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 285122688      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
285532328    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
286801864    7847992
294649856 195584000      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856        863
490234719         32         Sec GPT table
490234751          1         Sec GPT header
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 294649855] <Unknown ID>
2: 07 1023 254 63 - 1023 254 63 [ 294649856 - 195584000] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
*4: 07    0   0   0 -    0   0   0 [         0 -          0] HPFS/QNX/AUX
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$
It wasnt like this before. Before 3 and 4 had some of the same values from above instead of all 0s. After trying to take advice from threads with similar problems and entering stuff into the command line it became like this. I think I might have messed thing up while looking for a quick fix.
Can anyone help me with this? Thanks.

I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
GPT 3 Start
GPT 3 End
GPT 3 Size
NTFS Start
NTFS Offset
NTFS End
NTFS Size
293378384
293380320
1936
294649856
1936
490233855
195584000
I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

[SOLVED] After pacman update, system no longer boots

Updated pacman packages, and half-way through the upgrade proces fails (it mentions not being able to find package-control). Upon investigating, I notice no programs are working. I ls /usr/bin and it is empty! In a panic, I restart the machine, and it no longer boots up.
My boot is on sda3 and /root is sda5.
When bash starts up, it loads the kernel fine, and then after a second it panics and exclaims: "No init found. Try passing init=bootarg".
I load up my trusty Arch livecd and fsck the partitions. Fsck claims both partitions are clean. I am able to mount them and examine the file structure: all files look like they are there. I then try to chroot the mounted partition (sda5, my /root), and get the error that "/bin/bash" is not found, even though it is there in the correct directory. Not sure what to do now.
My grub entry, which has always worked fine prior to this:
legacy_kernel '/linux344-ck' 'acpi_osi=Linux' 'root=/dev/sda5' 'rootfstype=ext4' 'init=/sbin/init' 'pcie_aspm=force' 'acpi_backlight=vendor' 'i915.i915_enable_rc6=1' 'i915.i915_enable_fbc=1' 'i915.lvds_downclock=1' 'ipv6.disable=1' 'i915.semaphores=1' 'modprobe.blacklist=bluetooth,uvcvideo' 'ro'
legacy_initrd '/initramfs-linux-fallback.img' '/initramfs-linux-fallback.img'
UPDATE: solved issue. I didn't read the news. Upgrading via pacman broke my system because of this. Now I know! System is running smooth again.
Last edited by corruptz0r (2012-07-15 20:26:53)

Huh. I guess the problem was a couple of stale and crusty {,f}getty .service files, and an obsolete slim.service file I created a while back.
Removing them fixed my problem, although tty1 still shows boot messages (not a problem, and may not even be "new" behaviour)
Cheers Tomegun.

Z77A-GD65 no longer boots with 4 RAM modules

I had 4 x 8GB Cosair Vengeance LP that used to work fine, but no longer boots into Windows with 4 but only with 2 RAM modules. Any help in solving the issue would be appreciated. ( I need 32 GB as I run many virtual machines )
The 4 modules worked fine for few months until couple weeks ago, when I saw issues with booting into Windows 7. The workaround was to "warm up" by leaving the PC in BIOS for about 5 minutes and it would boot fine. Since couple days ago, it would POST but not boot into Windows or into live Linux on USB, so I started troubleshooting with bare bones first ( MB, CPU, 1 RAM, PS ) and then starting adding more and more components until I found that 1 and 2 RAM modules worked in either black or blue rail but with 4 RAM modules, it will POST, but not boot at all into either USB based live system or into Windows 7.
Memtest with 2 separate sets of modules pass with flying colors. Mixing the sets work fine too, but add 2nd set (i.e. 4 modules) and it fails to boot. I am leaning more toward believing the issue is with the MB than with the RAM since mixing them doesn't throw any memory error.
Any suggestion on how to check if it's the RAM or MB ?

Quote from: PirateDog on 25-November-13, 00:23:30
If these were 2 kits mixed, ...
These were 2 mixed kits.
Quote from: XFM on 25-November-13, 07:01:42
What voltage is the RAM running? A slight bump up in voltage might help.
As to voltage, I started with standard 1.5 and then incrementally upped it to 1.65v. At 1.6v and above, it does boot into Windows, but intermittently goes into BSOD... Works perfect with 1.5v with 2 RAM modules.
I'll save the money for next build instead of going for 32GB kit. ... guess I'll live with 16GB for now.
Thank you all for the advice.

Macbook no longer boots

Hi,
This past Tuesday night I downloaded the new software updates for my macbook. There was an error during the installation and the updates did not complete. A screen popped up on my macbook which told me that I needed to re-start my macbook. I clicked ok and re-started. After the re-start my macbook will not boot, and remains stuck on the screen which reads "Starting Mac OS X..." I have tried resetting the PRAM and SMC, as well as using the Disk Utility to repair the disk. So far nothing has worked and the macbook remains stuck in boot-limbo...
Has anyone experienced anything similar after installing apple updates? Any help would be appreciated. Bought my macbook in June 2006 and my applecare just expired this past june.
Thanks!

Hi,
i'm following the disscussion since i've notice that my problem is very similar to UptownTopRanking. My macbook freezed when i was uptading (4 uptade at the time including Mac OS X). I shut it down by pressing the power button for few seconds.
And after the computer no longer boots and freeze on the grey screen.
I've tried the solutions proposed on the apple support page but it still not working.
When i saw this topic, i tried to do the same, archive and install the Mac OS X program with my original CD.
The problem is that everytime I'm trying to install it, the program stop after few minutes an ask me to reboot because and error occured. The Error message says : (i'm translating from french)
The installation program didn't succeed to install some files in the "/Volumes/MacintoshHD". Contact the editor of the program to have some help.
And then they ask me to restart the computer, and when i'm trying to intall again, the installation process is still crashing..
Is there anything i can do?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033)

How do I transfer an Itunes library from my Ipod to a library on a new computer? The original library was built on a laptop that no longer boots.

I built an Itunes library for my Shuffle on an old laptop which no longer boots. I have since built a new library on my main computer and want to transfer the library that is still on the Ipod to the new library so I can add some new tunes. How do I do that? Thanks!

You can't transfer song files from iPod to computer using iTunes, except for songs purchased from the iTunes Store (and you can also re-download purchases on the iTunes Store Purchased page). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your new computer, drag the files (or the folder containing the files) to the iTunes window to add them to the iTunes library.

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

Can no longer boot into Mavericks 10.9.5

My problem is that I can no longer boot into Mavericks 10.9.5 on my mid-2012 Macbook Pro. The problem arose suddenly without any known major changes to my software or hardware. The booting process freezes with the apple visible and the circle below it spinning endlessly. Every several seconds, the display very briefly gets brighter, then the circle starts spinning again and the process repeats itself. It never gets to the user login screen.
Other than keeping various apps up to date, I don't recall any recent major operating system or other major software updates, nor have I made any recent hardware changes. I've searched a multitude of threads and and tried any number of fixes without success. Here's what I've tried so far (and probably a few more that I can't remember): (1) Repaired the startup disk with both Recovery HD -> Disk Utility and single-user mode -> /sbin/fsck -fy; (2) Repaired the startup disk permissions with Recovery HD -> Disk Utility; (3) Reloaded the Mavericks 10.9.5 operating system twice; (4) deleted /Library/Preferences/com.apple.loginwindow.plist; (5) reset PRAM and NVRAM; (6) booted with "D" pressed and ran the Apple hardware test, which ran for about 40 minutes and reported no problems; (7) tried booting from a bootable clone of Mavericks 10.9.5 on an external hard drive, which also failed at the same place with the apple showing and the circle below it spinning endlessly. ***Oddly, I am able to boot from a bootable clone of Mountain Lion on an external hard drive. It's Mavericks that won't boot.***
Here is the part of the system log the repeats itself over and over and seems to correlate with the repeated failed attempts to complete the booting process. Any help would be appreciated beyond words:
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Server is starting up
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: init_page_flip: page flip mode is on
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 --- last message repeated 1 time ---
May 2 12:49:01 SCH-MacBookPro kernel[0]: IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 343
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: mux_initialize: Mode is dynamic
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSMachineUsesNewStyleMirroring: true
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: MPServiceForDisplayDevice: Invalid device alias (0)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
UUID 0x3ef17c2fc9ab601507ec022fbd95576c
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (2560, 0)[1680 x 1050], 54 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
UUID 0xde23f9c1cf7b915b2afe83aecee77b54
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSSetWindowTransform: Singular matrix
May 2 12:49:01 --- last message repeated 1 time ---
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
UUID 0x3ef17c2fc9ab601507ec022fbd95576c
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (435, -1050)[1680 x 1050], 54 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
UUID 0xde23f9c1cf7b915b2afe83aecee77b54
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXPerformInitialDisplayConfiguration
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04248378: Unit 4; Vendor 0x610 Model 0x9227 S/N 372181685 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f0041: Unit 5; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04280142: Unit 2; Alias(2, 0x5); Vendor 0x610 Model 0xa005 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (435,-1050)[1680 x 1050], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXMuxBoot: Boot normal
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, accelerator 0x00004f2f, unit 0, caps QEX|MIPMAP, vram 1024 MB
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, accelerator 0x00004907, unit 2, caps QEX|MIPMAP, vram 1024 MB
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor enabled for tile size [256 x 256]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXGLInitMipMap: mip map mode is on
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: Unit 4; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: Unit 2; ColorProfile { 3, "Color LCD"}; TransferTable (256, 12)
May 2 12:49:01 SCH-MacBookPro.local launchctl[356]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
May 2 12:49:01 SCH-MacBookPro.local launchctl[356]: com.apple.findmymacmessenger: Already loaded
May 2 12:49:01 SCH-MacBookPro.local com.apple.SecurityServer[23]: Session 100021 created
May 2 12:49:01 SCH-MacBookPro.local UserEventAgent[357]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
May 2 12:49:01 SCH-MacBookPro.local airportd[71]: _doAutoJoin: Already associated to “schuyler”. Bailing on auto-join.
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Setting the initial value of the magsave brightness level 1
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window Started Security Agent
May 2 12:49:01 SCH-MacBookPro.local ManagedClient[362]: ApplePersistence=YES
May 2 12:49:01 SCH-MacBookPro.local SecurityAgent[363]: Failed to create agent mechanism, failing authentication!
May 2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: error creating mechanism agent
May 2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: evaluate returned -60008 returning errAuthorizationInternal
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window - Returned from Security Agent
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: ERROR | -[LoginApp performAuthPluginRequest:] | AuthorizationRef doesn't have a username. Exiting.
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (0 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: loginwindow connection closed; closing server.
May 2 12:49:03 SCH-MacBookPro com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 1 seconds
May 2 12:49:04 SCH-MacBookPro.local loginwindow[364]: Login Window Application Started
May 2 12:49:04 SCH-MacBookPro com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 7 seconds

Hi
You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR. But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
Hope you don't need the info on disks. If you do, I would install another HDD, load XP, then copy original Disk to save place.
Good luck
Jocko

My internal hard drive no longer boots. Boots just fine in external usb enclosure.

My internal hard drive no longer boots when inside my laptop. The drive boots just fine in external usb enclosure. It is also fully recognized when internal (as seen in single user mode, recovery mode or while booting from another drive).
I have tried:
with disk utilities
•fixing permissions
•repairing disk
in single user mode
•fsck -fy
zapping the pram
removing ram and zapping the pram
Any suggestions or diagnostics would be appreciated.

Can't believe I spent days reformating my hard drive, restoring it, getting another hard drive... and it was all a cable that failed. I wonder what can make an internal cable like that fail (seems like the least likely part of all to fail).
Thanks PlotinusVeritas
Thanks to ifixit:
bit.ly/1q0EnOx
If you can't fix it, you don't own it!

Windows 7 no longer boots after upgrade from Lion to Mountain Lion

I got a late 2011 MacBook Pro, on which I installed Windows 7 with Boot Camp. After I upgraded from Lion to Mountain Lion, I can no longer boot Windows. If I keep the option button pressed during boot I only get the OS X and recovery options, and if I choose to boot Windows from the system preferences pane, I get a message that says that no bootable device was found. However, I'm sure that the partition is still there, because I can see it in finder and browse the files normally. How can I boot Windows again?

"Easier" in this case as an alternative is defined as repartitioning/reformatting your disk, and restoring from backups (which for most people also means starting from scratch with Boot Camp Assistant and Windows since most users aren't backing that environment up).
What you did is, in my opinion, easier and faster. But if you don't know what you're doing can lead to data loss. But then, by definition, blowing away your disk and starting over with a restored backup begins with data loss!

Bootcamp no longer boots...

Similar Messages

Maybe you are looking for