BootCamp not recognizing my windows install CD

Hello,
I'm trying to install BootCamp 1.2 on a fresh MacBook Pro. I'm installed the BC Assistant, run it, partitioned the drive (30GB partition), inserted my Windows XP SP2 install cd, and hit the Start Installation button. BC then reports that I should insert the install CD. The problem is that the install CD is already there!
I've the same exact install CD with BC 1.1.2 with no problem, and on PCs. Any idea why BC is not recognizing it?

Look for "Windows Compatible Technology" on the Discussions page; just click on "Discussions" in the "Apple.com > Support > Discussions ...> trail at the top of any discussions page, or go directly to http://discussions.apple.com.
You should be able to boot it directly; Assistant merely makes it easy to do so. Usually. You MAY have to ensure that it reboots into Windows manually on the restarts if you initiate the install manually, via the Option key.
Doug

Similar Messages

Bootcamp not recognizing legit Vista install disc (says it's a blank disc).

Through school, I received a copy of Windows Vista Business. I had it installed on bootcamp for over 2 years.Recently, my hard drive crashed. I replaced the hard drive, reinstalled Snow Leopard, and then attempted to reinstall Vista through bootcamp. I have created the partition on the hard drive. When it gets to the point that I need to insert the Vista installation disc, I insert it, and it tells me the disc is blank. It is an official copy from Microsoft, and has only be in a computer once before. There are no scratches on the disc. I try to open the disc in finder, and it still shows as blank. I decided to try upgrading to Lion, to see if it would help, but it considers the disc blank just the same. I do not have the money to buy another full version of the Windows OS, but desperately need it for school. Please advise!

Ricky_W wrote:
Through school, I received a copy of Windows Vista Business. I had it installed on bootcamp for over 2 years.Recently, my hard drive crashed. I replaced the hard drive, reinstalled Snow Leopard, and then attempted to reinstall Vista through bootcamp. I have created the partition on the hard drive. When it gets to the point that I need to insert the Vista installation disc, I insert it, and it tells me the disc is blank. It is an official copy from Microsoft, and has only be in a computer once before. There are no scratches on the disc. I try to open the disc in finder, and it still shows as blank. I decided to try upgrading to Lion, to see if it would help, but it considers the disc blank just the same. I do not have the money to buy another full version of the Windows OS, but desperately need it for school. Please advise!
Lion does not support Vista, or XP, install Windows 7.

TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

Ipod not recognized by windows or itunes

OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

Ipod not recognized by windows, itunes, and will not charge with pc.

yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
-1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
-2nd, windows gave me a message saying the hardware could not be recognized.
-3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

USB Device not recognized by windows

When I first plugged my iPod into my computer, it went through the whole recognizing new hardware thing. Installed the drivers, then said that the new device was ready to use. But then I get a message that says "Device malfunction, device not recognized by windows" or something to that effect. I only have 3 days to return this iPod...anyone have any ideas? Thanks.

I'm not very familiar with the Windows OS but try this tip I picked on the forum up a while back, hopefully it might help.
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer.

IPod not recognized by Windows / iTunes

Hello,
I hope someone here can help. So far my first experience with Apple support has NOT been a positive impression.
I searched for info on this problem, but the other ones I see all seem to be related to freezing or battery issues.
iPod Classic 120GB, I don't sync very often, and just finished doing a bunch of cleanup in iTunes (album artwork, song info, etc.) and want to re-sync the pod.
When I connect to the PC with the USB cable, Windows doesn't seem to recognize the device, and it doesn't show up in iTunes.
It is charging through USB, however. The battery is fully charged.
I tried 3 different USB ports on the PC.
Tried restarting iTunes.
Tried restarting the computer.
Went to Apple support website, tried the troubleshooting assistant:
Reset the pod.
*Had already tried different USB ports.
*Had already trired restarting the PC (Although it mentions checking for the latest software updates - I didn't do this. WHAT software updates should I look for? Device drivers? OS updates? WHAT???)
Re-installed iTunes. (Was already at v 9.2.1.4)
*Did not try the restore. Reading the instructions, it appears that the iPod has to be connected to do this, and that's the problem -won't connect!
Also read something about disk mode. I set the iPod to disk mode, but it's not recognized that way, either. When connected by USB in this mode, the iPod screen still says "OK to disconnect".
I tried the link "iPhone, iPad, or iPod is not recognized by Windows".
I do not see the "Apple Mobile Device USB Driver" anywhere in Device Manager. I suppose this is the problem.
However, continuing with the instructions, it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC?????
(These instructions also say to disconnect the device, but nowhere says when to connect it. Why do they put half-baked troubleshooting instructions on their web site???)
Is there anyone from Apple support on this list who can help? I believe the driver needs to be reinstalled somehow, but it didn'thappen when i re-installed iTunes, so how do I do this?
Thanks
Keith

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1414 iphone not recognized in windows or itunes

iphone not recognized in windows or itunes

My iPhone 5 was not being recognized by two different computers, windows 7 and windows 8.1. My wife's iphone 5 had no issues. I followed all the advice on-line from re-installing iTunes, resetting my phone ( as new and backed up from cloud), device manager troubleshooting, re-install drivers, different cables, different ports. Oddly enough in the fianl analysis my iPhone only gets recognized when the cable is insert in one way into the phone. Flip the cable and it goes straight to "unknown device". Doesn't matter which cable I use, it only works on one side. My wife's works both ways. I can't explain it, but there it is. I put a dot with a permanent marker on the cable to identify which side goes up.

MY PASSPORT NOT RECOGNIZED BY WINDOWS 7 VAIO (64 BITS)

Hello everyoneafter installing the driver WD SES Driver Setup (x64) , MY PASSEPORT drive is still not recognized by Windows 7. The small indicator light, but the drive do not appear in the disk manager. I know he normally works because I can use it on another computer with Windows Vista. I'm stuck and I did not want to throw in the trash MY PASSEPORT.Who can help me ?

This forum is for the WIRELESS My Passport. You are asking in the wrong forum.

USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1

My USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1. There is no sound when I plug it on pc or some error message. But other USB devices works well. Maybe there is not suitable drivers for this device? Please Help me!

Hi azeripatriot,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers.
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you connect your passport drive it does not auto install. Does the power light on the passport drive come on? What is the error message you receive?
Have you checked for any Windows updates?
You can run The HP Support Assistant to help with resolving issues and looking for updates.
If you believe it is a driver issue, you can download the software and drivers from the WD website. Here is the link WD download for passport drives. If you connect it to a different computer, does it install? They also have a diagnostic tool for testing the drives. Here is a link to their diagnostic tool .Western Digital Data Lifeguard diagnostics for Windows.
If this has not alleviated the issue, would you please provide your exact model of computer and the operating system you are running. How Do I Find My Model Number or Product Number?
Would you also provide the exact error you get when connecting the passport.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Video ipod not recognized by windows at all

My new video ipod suddenly cannot be recognized by Windows. I'm not really sure what happened - one day I was able to plug it in and have iTunes automatically start and sync, and now whenever I plug it in I just get the message "do not disconnect." Also, the iPod is not recognized by Windows - doesn't even show up in "My Computer," though it does show up in "Device Manager" and in the "Safely Remove Hardware" dialogue.
What could be wrong? I already uninstalled iTunes and Quicktime and reinstalled them, to no luck. I also installed the new iPod system software 1.3 but also no luck. Finally, I uninstalled all of my USB ports and forced Windows to reinstall them, but that didn't work either. The first time I put in the iPod after that I got a dialogue box that it had recongized the new hardware and was installing the iPod, but nothing ever came of it.
However, both iTunes and my video iPod are fully functional, and I have taken VERY good card of the video iPod.
Any idea what could be wrong???

I tried it, setting it to E. It didn't work. Tried the same thing after setting it to disk mode and it didn't work. Just the same old BS about "Do not disconnect," but it isn't recongized anywhere on the system except for Device Manager and the Disk Management tool you mentioned. No acknowledgement from iTunes or in My Computer. Meanwhile both iTunes and my iPod work fine, but they can't communicate with each other.
I AM GOING INSANE!!!!!!!!!!!!!!!!!!!!! I have tried every trick in the book that I could possibly think of. Not only did I uninstall and reinstall iTunes, QuickTime and the iPod helper, but after I uninstalled them I COMPLETELY nuked them, eliminating every file and clearing extraneous references out of the registry. Then I reinstalled from the CD going by the instructions by the letter. I thought for sure it would work now but for some ridiculous reason it doesn't.
I am completely at my wits' end.................. What the heck can I do???
PS: I also have Linux installed in a secondary extended partition, which is on my hard drive but not counted as C. Not sure if that makes any difference.

Ipod Shuffle A1271 is not recognized in Windows 8 64-bit

My Ipod Shuffle is not recognized in windows 8 (64 bit)
I get an error saying the device is not recognized by the computer and was getting just a solid orange light on the ipod.
I kept playing around to find a solution and in the process deleted the drive in hopes to install it again. Now I just get a flat green light and am unable to even restore the driver.

Yes. I have the latest version intalled but this hasnt helped.
I thought it could be to do with the Shuffle not having enough of a battery charge.
So i plugged it into the wall charger and then tried this didnt work either.
It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

802.11ac not recognized on Windows 8.1 Pro under Boot Camp.

I just installed Windows 8.1 Pro under Boot Camp. The issue I am having is that the 802.11ac network is not recognized in Windows. Windows only recohnizes the 802.11n network. When I boot up OSX Yosemite, It works as usual. Anyone else have this problem?

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

Out of warranty by a month!
Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
The touchscreen still works while the screen is black.
System restarted after sleep mode I think.
The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
When on the external monitor the internal display is not even recognized by windows.
When I boot in safe mode, the internal screen works fine with of course limited capability.
I have reloaded display drivers from the support site.
Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
Anyone have any clues as to what my be going on? Hardware, driver etc???
What information can I provide?
Solved!
Go to Solution.

This is a pretty weird issue with conflicting observations.
1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
2) Display works on external monitor in regular mode. (So, not drivers issue)
Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
Could you re-open and check that all connections are good?
Is the Wi-Fi card working well?
I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

BootCamp not recognizing my windows install CD

Similar Messages

Maybe you are looking for