Bootcamp on Macbook Pro Medio 2010, can't get past the partition

Hi there!
I am trying to install boot camp on my Macbook Pro medio 2010 and I do not have the option to install it using USB.
I have an ISO file with windows 8 on it and have burned it down on a cd, but it asks me to insert the installation disk when I am at the stage where I need to create the windows partition. What do I do?
Kind regards
NielsChr

You do not reinstall the OS. As shown above, you have to run Disk Utility.
Put the OS disk in the computer and restart while holding the C key down (the letter C).
Start the installation procdess and go to the screen after the language selection.
You now see a screen with a menu bar. Click Utilities in the menu bar and select Disk Utility.
At this stage you will see the screen shown in OGELTHORPE's post.
The Repair Disk button is on the bottom right.

Similar Messages

  • My macbook  air is frozen, can not get past login

    Hi my macbook air froze I can not get past the login
    Please help

    "stuck on the page I was trying to  load"
    Page as in webpage on a browser?
    Press Command + Option + Esc to force quit the browser.
    When you post for help, please state which OS X is installed.
    The more details you provide, the easier to help.

  • Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straig

    Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straight to my phone instead of my MacBook Pro. Help!!

    Any error message?

  • I'm running OS X 10.7.5 on my MacBook Pro.  I can't get a DVD to eject.  I'm getting an error message "supported disc not available".  How can I get the disc to eject?

    I'm running OS X 10.7.5 on my MacBook Pro.  I can't get a DVD to eject.  I'm getting an error message "supported disc not available" when I try to use the DVD player eject button.  It also does not show up on my desk top as an icon as it normally would.  How can I get the disc to eject?

    see Thread
    https://discussions.apple.com/thread/3996208?start=0&tstart=0
    and Kappy reply

  • I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?

    I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?

    The answer has not changed since your last post here https://discussions.apple.com/thread/3230576?tstart=0
    There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

  • Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it under your ID. In that case, contact iTunes Support.

  • HT1349 I can't get past the welcome screen for my new macbook pro. Help!!

    Seriously. My new macbook pro will not let me progress past the welcome screen. It will not let me select australia (or any other) country as its host country!!!!

    I just had the exact same problem. You must physically push down on the trackpad and get an audible "click" to activate the continue button on the language screen. The one-touch click function is not yet enabled on your Macbook because you haven't set it up yet. This should work for you. It did for me!

  • My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

    My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

  • My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

    My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    What specific KB?
    Do you know it works?
    I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

  • I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

    I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

    MacBook Pro
    MacBook Pro Apple Support
    Apple Support Lion
    Lion Mac OS X Communities

  • AE CS6 can't get past the "Mediacore Initializing" window

    I just installed Mountain Lion on my 12-core Mac Pro, did a clean install of CS6 Master Collection and still can't get past the "Mediacore Initializing" window. All the other CS6 apps are working fine and I don't have any plug-ins installed as of now.
    Also, After Effects CS6 with Mountain Lion is working just fine on my MacBook Pro so I'm wondering if Mountain Lion is really the cause or not.
    I've tried are throwing out the preference files, but that didn't do anything either. Furthermore, I still have CS5.5 on my computer and After Effects gets stuck in the same place with that version, as well.
    If anyone has any ideas it would be much appreciated.
    Thanks,
    Ray

    Here's a help document for this issue - http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

  • Can't get past the white screen at start up

    I can not get past the white screen when it starts up. It will chime and then stay at the white screen. I have replaced the hard drive, memory, battery. I have reset the PRAM and the SMC.

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    Make an appointment at the genius bar and get the phone replaced.

Maybe you are looking for