Bootcamp partion lost after OS X update, Need help repair my disk.

Hi.
After updating to Yousimiti yesterday, i encountered som problems with my bootcamp partion.
I wasn't able to boot from the partion. I googled a lot, and found some posts, where the problem was resolved, and followed the following steps:
sudo fdisk -e /dev/disk0
p
setpid 4
07
flag 4
p
write
y
After this i was able to boot form my Drive, but it tells me: "Operating system missing".
Then i started investigating further i saw that my bootcamp partion now only is 60GB, where before it was 100GB.
When i first made my Bootcamp i made it 60GB which i fast found out was not enough for the programs i needed, so i used a program on windows to expand the patron, from empty space on the disk. Now i have 40GB blokced space, and the 60GB Bootcamp.
From what i have read the problem is that Windows and OS X does not use the same Data table format.
Is it possible to Rewrite the datable, os that OS X knows that the Windows part is 100GB and not only 60?
Underneath here i linked to some screenshots of the problem, Hope you guys can help me! (Sorry that it is danish, hope you see et anyways)
And there some info that i got from a "Partition inspector app":
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA  Type
1             40       409639  EFI System (FAT)
2         409640    727569303  Unknown
3      727569304    728838847  Mac OS X Boot
4      859918336    977104895  Basic Data
Current MBR partition table:
# A    Start LBA      End LBA  Type
1              1       409639  ee  EFI Protective
2         409640    727569303  ac  Apple RAID
3      727569304    728838847  ab  Mac OS X Boot
4 *    859918336    977104895  07  NTFS/HPFS
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: Unknown
Listed in GPT as partition 2, type Unknown
Listed in MBR as partition 2, type ac  Apple RAID
Partition at LBA 727569304:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab  Mac OS X Boot
Partition at LBA 859918336:
Boot Code: None
File System: Unknown
Listed in GPT as partition 4, type Basic Data
Listed in MBR as partition 4, type 07  NTFS/HPFS, active
If u need more info please tell me!

The drive is dying, I doubt you can fix it, but...
10.6 has been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE.

Similar Messages

  • ITunes and Quicktime Error after automatice Apple update, need help!!!

    So I currently have a new labtop with windows vista. I have been runining iTunes for the pass 3 months already no problems. The Apple automatic update has never caused any problems till now. Quicktime needed to be updated today, and I accecpted the update, prior to that iTunes and Quicktime was working properly. Once the quicktime update was complete, it restarted my computer like usual. Then when I tried to open iTunes this error came up:
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Now I checked the audio configuration and nothing was changed or anything, that has not been touched at all, so I still think it had to do with the update. The next error was came up when I tried to open Quicktime and it read:
    "Runtime Error!
    Program C://ProgramFiles/QuickTime/QuickTimePlayer.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information"
    So as long as I have been using Quicktime and iTunes I have never encountered this, I tried to re-install but the error kept coming up after it was installed. Please help me out!

    try doing following the steps in these articles
    http://docs.info.apple.com/article.html?artnum=31115
    and
    http://docs.info.apple.com/article.html?artnum=93976
    hope this helps

  • Non-Library Synced music lost after latest iTunes update. Help!

    I downloaded/update to the latest itunes which caused my phone to be reset to its factory settings. Although my contacts, photos and apps ect. were recovered, my music was not. I had a lot of music (2500+) on my phone which was however not synced to my itunes library as most of it was purchased from other sources. They were all normal MP3 files but now I don't know how to get them back! Surely iTunes couldnt have just wiped all of my music, could it? Please please please help me!

    If you have content that is on the iPhone but not on the computer then Recover your iTunes library from your iPod or iOS device has useful tips. If it has now gone from the iPhone too then you can still recover your iTunes purchases.
    What do you see if you drill down into the Mobile Applications and Music folders inside iTunes Media? Are you certain the content has been deleted?
    If you've not done too much with the drive since things went wrong, then an undelete tool might recover some of the lost media. FreeRecover looks promising... Select the drive, use the options to get file paths and check file integrity, then, presumably, you can restore anything that has been deleted from within the media folder that looks recoverable.
    While it is understandable that you blame Apple & iTunes for losing the media you could have just as easily turned on your computer to find the entire drive fried. You need to be prepared for such by backing up all your important data to at least one secondary independent location.
    tt2

  • I'm getting  an error message after completing an update.  Help?

    I'm getting  an error message that says "This version of iTunes has not been correctly localized for this language.  Please try running the English version." after completing an update.  Help?

    Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

  • I lost my iphone some time ago. is there any way to recover my lost iphone? I really need help.thanks, I lost my iphone some time ago. is there any way to recover my lost iphone? I really need help.thanks

    i lost my iphone some time ago, is there any way to recover my lost iphone?i really need help..thanks before

    Don't know what you mean by "some time ago", but unless you activated Find My Phone and the phone is still on, the answer is no. (Even if you ask 3 times).

  • I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

    I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

    There is nothing anyone can do.
    Sorry.
    You will have to keep looking for it

  • Need help repairing Driver - pic included.

    Hey guys, i have been trying to get boot camp to work on my macbook for ages. First i got it to work, but then when i used windows, it wouldn't recognize my wireless in my macbook. Anyways, to make a long story short, i used the boot camp assistant tonight to delete the windows partition, then i was trying to re-install windows XP.
    As most of you know, the first step is to partition the disks, when i told it how much to partition of each it came up with a driver error saying i needed to repair the disks.
    so, i went to disk utility to try and verify the disk, its did, but then it came up with this:
    http://i50.photobucket.com/albums/f344/kawirider04/Untitled-1-1.jpg
    any help would be great guys, i eventually want to run windows xp on my blackbook so i can play World of Warcraft with a higher framerate. Anyways, thanks in advance!
    BTW - after i 'verify disk' i can't click on 'repair disk'
    Black Macbook 1gb Ram   Mac OS X (10.4.8)  

    Boot up from your Install DVD and then launch Disc Utility to verify/repair the disc and permissions as well.

  • My Mac keeps starting up to the disk utilities screen. Im guessing i need to repair the disk or load my backed up memory but i am unsure of how to do that. I have all my memory backed up on an external hard drive.

    My Mac keeps starting up to the disk utilities screen. Im guessing i need to repair the disk or load my backed up memory but i am unsure of how to do that. I have all my memory backed up on an external hard drive.

    The Disk Utility screen has instructions right on it.
    Just read them and follow the directions.
    Readers can help if you get stuck.
    It opens with something like, "select a disk, volume, or image".
    You click on your drive in the left column, top item.
    The next screen spells out how to do a ( Repair Disk ).
    You have a Macintosh. It will not cut your hand off.
    If something dangerous is coming, it will say stuff like, "this will erase all the data on your drive. Do you want to proceed?"

  • Grey Screen after update - need help

    Hi
    My friend just called me - her macbook is stuck on the grey screen with apple logo - after she done the security updates and restarted.
    She can boot into Windows XP (bootcamp) without any issues.
    I'm going over there tomorow to help her out and was wondering if someone could give me a little guidance as to what needs to be done.
    I guess I can try booting off of the instalation disc and reparing permissions, but after that I'm pretty much lost. Any help is greatly appreciated
    Cheers

    Hello,
    I've had this problem twice, and each occurred after a security update.
    What helped me was the following:
    -Take out your powercord and your battery. Press the power button for about 5 seconds.
    -Then, insert your battery and powercord, start the computer, and hold down AppleCTRL+PR.
    From what I understand, one of these two steps resets the power management system on the macbook.
    After you perform these two steps, your computer may still hang at the grey screen with the apple logo. However! Let it hang for about 5-10 minutes and it will automatically restart, and boot properly.
    You can also try calling Apple support on your friend's behalf ... they were more than helpful.
    Blackbook Core Duo   Mac OS X (10.4.9)  

  • Bootcamp partition lost after moving to larger HDD (Mavericks and Win7 X64)

    Hi Folks!
    I read those topics concerning lost and broken bootcamp partitions and I am Wondering if someone may help me.
    What was my aim: Due to lacking space of my 320 GB HDD I moved to a 750 GB HDD.
    I did this by installing Mavericks from a USB disk and rebuilt it with TM. After the installation I had a fully working Mavericks partition and the MacOS recovery partition.
    Next step was to rebuild the Bootcamp partition. For that I installed a new copy of windows via bootcamp assistant. After booting up the first time I booted the mini partition wizard cd, deleted the bootcamp partition and rebuild the partition from the old HDD changing the size fitting to the available space. After rebooting I chose to boot from the Win7 DVD and chose the repair option to fix windows. Everything worked well, I could boot into Win7 and it showed me both partitions (Mavericks and bootcamp).
    BUT
    when i boot into MacOS it is not able to mount the mavericks partition.
    After checking it with fdisk and disk I found out that the bootcamp partition was recognized as FAT32 by the disk utility program, which always told me that it was not able to repair the bootcamp partition.
    So I followed Christopher Murphy's instructions to change the type for FAT 32 (0C) to ntfs (07) with the effect that I can't boot windows anymore due to "operating system not found" error.
    So this is what the refit partition inspector tells me about my HDD:
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640    731457695  Mac OS X HFS+
    3      731457696    732727239  Mac OS X Boot
    4      732727296   1465147391  Basic Data
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1       409639  ee  EFI Protective
    2         409640    731457695  af  Mac OS X HFS+
    3      731457696    732727239  ab  Mac OS X Boot
    4 *    732727296   1465147391  07  NTFS/HPFS
    MBR contents:
    Boot Code: Unknown, but bootable
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Mac OS X HFS+
    Listed in MBR as partition 2, type af  Mac OS X HFS+
    Partition at LBA 731457696:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 3, type Mac OS X Boot
    Listed in MBR as partition 3, type ab  Mac OS X Boot
    Partition at LBA 732727296:
    Boot Code: Windows BOOTMGR (Vista)
    File System: NTFS
    Listed in GPT as partition 4, type Basic Data
    Listed in MBR as partition 4, type 07  NTFS/HPFS, active
    This is the info got gives to me:
    sudo gdisk -l /dev/disk0
    GPT fdisk (gdisk) version 0.8.10
    Warning: Devices opened with shared lock will not have their
    partition table automatically reloaded!
    Partition table scan:
      MBR: hybrid
      BSD: not present
      APM: not present
      GPT: present
    Found valid GPT with hybrid MBR; using GPT.
    Disk /dev/disk0: 1465149168 sectors, 698.6 GiB
    Logical sector size: 512 bytes
    Disk identifier (GUID): 3AA6D384-5EC7-48C6-B593-4513AFF55241
    Partition table holds up to 128 entries
    First usable sector is 34, last usable sector is 1465149134
    Partitions will be aligned on 8-sector boundaries
    Total free space is 1805 sectors (902.5 KiB)
    Number  Start (sector)    End (sector)  Size       Code  Name
       1              40          409639   200.0 MiB   EF00  EFI System Partition
       2          409640       731457695   348.6 GiB   AF00  Macintosh HD
       3       731457696       732727239   619.9 MiB   AB00  Recovery HD
       4       732727296      1465147391   349.2 GiB   0700  BOOTCAMP
    philipp-3:~ Phil$ sudo gpt -r -vv show disk0
    Password:
    Sorry, try again.
    Password:
    gpt show: disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
    gpt show: disk0: Suspicious MBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: disk0: Sec GPT at sector 1465149167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640   731048056      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
       731457696     1269544      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
       732727240          56        
       732727296   732420096      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1465147392        1743        
      1465149135          32         Sec GPT table
      1465149167           1         Sec GPT header
    This is what fdisk gives:
    sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 -  731048056] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [ 731457696 -    1269544] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [ 732727296 -  732420096] HPFS/QNX/AUX
    And this is a photo of the disk util (in german)
    And this is the error when I try to check it:
    Next step is to try to cover the windows copy. I guess startup repair will work, unfortunatly I  have no DVD at the moment right here.
    But my problem is not the restoring of windows but to mount the bootcamp partition in Mavericks again.
    Any help?
    Thanks in advance
    Phil

    Ok, it works again. But actually I don't know why. After neither startup repair nor mini partition manager could repair the ntfs partition, i deleted it and rebuilt it from the old HDD (fortunately not deleted yet). The only thing I did in difference was to boot into Mavericks before starting startup repair after i copied the partition. For any reason Mavericks recognized it this time. I have no clue why but everything is working.
    So far...

  • All SMS msgs & recent contacts lost after IOS 5 update. Any way to recover please?

    All my SMS msgs & recent contacts lost after IOS 5 upgrade, Any way to recover please?

    Hello. I have the same problem - I upgraded to iOS 5 and in the process lost my contacts and ALL my SMS. I know that we can use backups to restore the information. But the problem is that my back ups are May 2011 and the day I did the upgrade, so nothing helpful there. I don't think the system did a backup before the upgrade. I did the upgrade on october 22. And for that date i have two back ups. I  restored the phone to the older backup and it restored my contacts but not my SMS. Is there ANY way I can get my SMS back????

  • After the upgrade to the new firmware, time capsule disconnect the imac (wireless connection by airport) after few seconds. NEED HELP!

    I have:
    imac 24" (year 2008) OsX 10.6.8.
    Time Capsule  (year 2010) 2Tb.
    Wireles connectio by Airport v5.6.1
    Problem:
    Since the last firmware update of the time capsule, the connection is lost after a few seconds.
    Note: a windows 7 pc is connected to the time capsule too, without problems!
    Can someone help me, please!

    Go back to 7.6.1 at least.. do not use 7.6.3 firmware.. as it has wireless issues.
    You go back by selecting firmware update with option key held down.

  • Can't update new software update need HELP

    Ok I got the Jan software update and well I just know really how to just install it. I red someone's post here but it's just not clear on how to do it. Is there someone that can tell me in a clear way the steps to do it please. I know he said to do a folder called "Mobile Applications" and to put the downloaded file (iPod touch App Pack 4A93.ipa) in it, so I did it and I put it in the iTunes folder in my "Music" folder, I pressed Sync and no software appear. So I just need help with this please!!!!!!
    Thanks all!!!!

    Ok got it to work. I had to disable Manual manage music + video button but lost every thing because of this but I got my software update!!!!
    Thanks

  • My APTV 3 restarts by itself after the last update. plz help me

    Netquark Sep 16, 2014 8:42 AM   
    Hello my APTV 3 restarts by itself after the last update.
    I restore my APTV with pc and it does not work.
    if I unplug the cables after 30 minutes, it works, but once sleep if you restarts the problem comes back. plz help me
    Apple TV

    Did you successfully restore the Apple TV?
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • I have a big problem at the installation of after effects CS4 ! NEED HELP

    HEY all i need help I want to install AFTER EFFECT cs4 and i do all AV hijack and usb fix scan nothing fond >>NEED HELP
    ERROR CODE:
    Adobe Dynamiclink Support
    Erreur:
    Error 2.
    Adobe Dynamiclink Support
    Erreur:
    Error 1605. Cette action n’est valide que pour les produits actuellement installés.
    THANKS

    I know the problem is  i have an old AE cs4 and i don t uninstall correctly  but i have another problem with twixtor effect  i register my twixtor but i have the orange CROSS on my video --' and THIRD PARTY installer won't  install my new effect "say uninstall and install correctly with serial number ..."
    i have CORE2 DUO E6320 GTS8600XFX 2GO RAM DDR2 ASUS MOTHERBOARD (bad) WINDOWS 7 32BIT ULTIMATE for the DYNAMIC links probleme i use ccleaner REGEDIT and cs4 cleaner tools .

Maybe you are looking for

  • I would like the share an iTunes library between two different accounts on one Mac. How do I do this?

    iTunes no longer works properly (aka at all) while using one of the user accounts set up on my iMac. It does, however, work when logging in under another user account on the same iMac. (if any of you can help me solve this issue that would be perfect

  • Sharing music from different computers to ipod

    we got a ipod and had a friend down loaded some of her music to my ipod,, now my ipod will not let me download the music I burmed from C D's into Itunes library. Is there a way to download them. All my ipod shows is her stuff. She has a HP compter an

  • CUIC 9.0 Custom Reporting

    Good Afternoon, I was wondering if anyone could help me with the following issue. I am looking to create customized dashboards for our contact center's supervisors. I'd like to add a customized report that includes All agent data for the current day

  • How to change color of iCal calendars??

    I'm transferring my calendars from my old G4 ical version 1.5.5 to my new imac ical version 3.0.2. I'm trying to change the colors the program assigned to my calendars. I'm a designer and we have kinda weird priorities but, my calendars LOOK horrible

  • Sharepoint as datasource

    Post Author: torreykite CA Forum: Semantic Layer and Data Connectivity Is it possible to use sharepoint lists as source tables in a BO Universe (6.5)? if so how would I establish the connection? Thanks, TK