Bootcamp partition does not appear and stuck at windows
Hello, i've tried to install windows by bootcamp yesterday, everything was going as it should but when it entered to the windows screen the mac lagged and stoped at this point. i restarted the mac but it came back to osx, i ignored the fact and tried to do the bootcamp again, but when i was choosing how much memory i would want it didnt let me put what i had put in the first try, i checked utilitary disc and there i could see that my memory was almost full, i realized that it was because it had created a new partition, i looked for it but wasnt appearing in my disk. I research in the internet and i saw that i could restart the computer and press alt to switch the partition. I did that but the mac didnt let me choose it just change to windows, i followed the instructions to install bu
when i was going to select the partition, it wasnt appearing. So i tried to go back to osx but pressing alt is not working anymore.
someone please help me
Hi
First i would like to know is if the Hard drive & Memory test have passed on the unit. You can run them from F2 Diagnostics. Kindly let me know the status.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Similar Messages
-
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?
?
-
Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
* wa2-low = |{ v_year_h }12|.
IF sy-subrc EQ 0.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
* wa1-low = wa2-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
WHEN 'ZREDT2'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
IF sy-subrc EQ 0.
* wa2-low = |{ v_year_h }12|.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André OliveiraI solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira -
When I plug in my iphone my charging symbol does not appear and my phone is not charging.
When I plug in my iphone 4 my charging symbol does not appear and my phone is not charging. Do I need a new battery? It is only a year old.
Can you try a different charger/USB lead? Also check the connector on the bottom of the iPhone for pocket fluff
-
Check number confirmation window does not appear and checks become confirmed automatically
We have updated to SAP 9.10.105 PL 00,
and we have two issues with check printing, first when we print check we do not receive a confirmation window and all of the checks show as being confirmed. as soon as be print checks in the payment wizard after the checks have printed we than get an error message.
"no matching records found 'checks for payment' (OCHO) (ODBC 2028) [message 131-183]
the second problem is if I set over flow to blank paper, it will only print one check at a time, and i still do not receive a confirmation window.
I am not sure if the original patch for 8.8 was left out of the 9.1 release.Thanks for this, I found this after posting a message with SAP Support. Just a heads up, they consider it as 'Consulting' function not an 'Application Error' so they will not be a fix. We'll just need to know to make sure users know to un-check this Box.
SAP Note: 0001422688 - Print on Blank Paper checkbox on Checks for Payment
Symptom
Scenario 1:
Check Number Confirmation window does not pop up after Checks have been printed.
You might receive the following error message:
'No matching record found 'Checks for Payment' (OCHO) (ODBC-2028) [Message 131-183]'.
Scenario 2:
User is not able to print batches of Checks either via Payment Wizard or via Document Printing and
the Cheque Number Confirmation window does not pop up.
Cause
Consulting
Solution
The issue could be resolved by uncheck Print on Blank Paper on Banking -> Outgoing Payments ->
Cheques for Payments
'Print on Blank Paper' setting on Checks for Payment is saved per user
SAP Note: 0001059752 - Printing Checks for Payment Skipping the Confirmation Screen
Symptom
Check Number Confirmation window does not appear and the check automatically get confirmed.
Reproducing the issue
Scenario:
Print a Check for Payment Via Document Printing or Directly for the Check for Paymet screen (under
Banking > Outgoing Payments)
Expected Results:
The Check Number Confirmation screen pops-up.
Actual Results:
Check Number Confirmation screen is skipped
Cause
Consulting
Solution
If the option 'Print on Blank Paper' is ticked, the Checks Number
Confirmation window will not pop-up.
Go through the following steps and check the settings:
1. Go to Administration -> System Initialization -> Print Preferences -> Per Document tab,
Document: Check for Payment. Check if the option 'Print on: Blank Paper' is ticked.
2. In Check for Payment document check whether the tick box 'Print on Blank Paper' is ticked.
3. Go to Administration-> Setup-> Banking-> House Bank Accounts. Check in the 'Paper Type' column
if the option Blank Paper is chosen. -
Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
HT2801 USB SuperDrive disc icon does not appear and therefore SuperDrive cannot be used
USB SuperDrive disc icon does not appear and therefore SuperDrive cannot be used.
There is NO advice regarding this issue on Apple Support.
Any recommendations?Also if you don't have this option checked in the Finder Preferences you won't get an icon on the desktop when a disc is inserted.
-
PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?
There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this? -
Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. I have signed in successfully. Why?
Hi irenedix,
After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_
Alternatively you can try downloading it from the direct download links available at: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards,
Rave -
My device does not appear in the iTunes window. Instead a separate window opens so I cannot sync my device. I have tried with both my iPad, my iPod and my iPhone. In each case a separate window opens showing that it is fully connected to the computer, but it does not open in iTunes.
I have followed previous instructions to stop then start the device manager. I have even uninstalled then reinstalled iTunes, but no luck. Can someone help??Hello Linda Lev,
It sounds like Windows recognizes that your devices are conneted, but iTunes does not. I recommend the troubleshooting from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
Take care,
Sterling -
Ipod does not appear in itunes after windows scan and fix
Two days ago, I restored my Ipod classic using Itunes 9.2.0.61. After restoration my Ipod started freezing Itunes and Vista. At a point, I saw a blue screen and my computer forced a shutdown. When it rebooted, Vista kept asking to automatically "scan and fix" problems on my Ipod. Thinking that would solve the "freeze" problem, I stupidly went ahead to have Vista scan and fix my Ipod. Now the freeze problem is gone, but my Ipod does not appear in Itunes. I have tried the five Rs from Apple, but that has not helped. Anyone with a solution?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts. -
when clicking firefox icon to open the internet, all that appears are the options along the top of the page. the rest of the screen does not appear revealing the desktop picture. The firefox page with the search bar does not appear.
http://imageshack.us/photo/my-images/214/screenshot20120303at155.png/'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
ITunes proxy authorisation window does not appear (and account is being blocked randomly)
Many users have iTunes installed on their PC. iTunes requires proxy authorization to connect to internet. Appropriate popup window appears when opening iTunes and trying to open some internet-based page there. Entering current AD account credentials helps to connect. There is also a checkmark there allowinf to save credentials for further use (and do not show this window anymore). When AD password is changed - this popup window does not appear again and user's account is being blocked (because iTunes tries to connect proxy with old credentials). The question is: is it possible to reset proxy settings, stored somewhere inside iTunes somehow? Just to return proxy authorization window back. Did you have such an experience? If you caould share any knowledge - it would be great.
What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac -
I have iTunes ver 10 on a PC with Playlists which do not sync to an Itouch or Nano (6th Gen). Also, all the music does not appear when I check entire library and there is enough memory on the device. When I select to manually manage music on the summary tab and selected playlists on the music tab nothing changes. Either way all the music isn't on either device and the playlists are not on either device. Please advise next steps. Thank you.
Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start. -
I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.
Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.
Maybe you are looking for
-
How to conver a BINARY Table in specific format Documento to send by e-mail
Hello all i am trying to send a file that is located in application server, this file was created in BINARY MODE, so now i need to download from this server and then send it by e-mail, i haver already download in BINARY MODE but when i send it and i
-
What Ram do I need for my iMac?
Hello I have an iMac 21.5-inch, Mid 2011, and I want to add more ram, and I think I have found the right type here:http://www.amazon.co.uk/Crucial-200-pin-SODIMM-PC2-5300-memory/dp/B000F7QRTG/ref =sr_1_1?ie=UTF8&qid=1420986001&sr=8-1&keywords=iMac+Ra
-
Random pausing When iphone connected to auxillary jack. Please help!
Hello to all. My iphone continually pauses when connected to the auxillary jack in my car and home stereo. It never does this when the ear buds are plugged into the jack on the phone. The auxillary cable I have is a typical cable. This one in particu
-
My multimeters don't function properly with ivi drivers
I have 4 Keithley MM in my setup. I am using the ke2000.dll ivi drivers for all my meters. I have also labeled each meter MM1..MM4, however when I make a call using MM1, MM3 is the one being control? How can I configure MAX properly to avoid this or
-
TS1717 Itunes has been "processing file" of my down load of Badlands for 8 hours
Itunes has been "processing file" of my down load of Badlands for 8 hours. What is going on?