Bootcamp partition not showing up when i go to install XP

i set up a 25 gig partition for bootcamp in 10.5.1 and put my XP disk in to install, but in the Windows setup window it never shows the option at the bottom of the setup window to choose the C:Partition3 <Bootcamp> [FAT32] (like in the manual)
thanks for any help

Can you boot back to OSX and open a terminal session and paste the output from the sample command below;
diskutil list disk0

Similar Messages

  • Bootcamp partition not showing at startup

    Hey guys,
    I upgraded my macbook pro to Lion last week and now I can't install Windows on my computer with Bootcamp. I can still partition through Bootcamp assistant, and in Finder it shows the Bootcamp device. However, when I try to install Windows by holding Option during startup, the Bootcamp disk is not showing up. There are only three options: Mac, Recovery, and Windows (disk). If I choose the Windows disk, it tells me there's no bootable device.
    Also, in Startup Disk in System Preference there's no Bootcamp option.
    Is the Recovery Disk screwing it up? Can anyone help me please?
    Thanks.

    Solved.
    I just installed clean BOOTCAMP using Bootcamp Assiastent, that causes windows data loss.
    Anyway, after formating bootcamp, i found a solution.
    get  iPartition and mark bootcamp partition "show in windows" option.
    i regret reinstalling windows

  • BOOTCAMP partition not showing up on Mac OSX after resize

      Hello, I have a iMac 27" late 2013 with OSX 10.9.5 and recently I resized my bootcamp partition and reformatted the OSX partition for a clean install. After the formatting, I cannot see or access the Bootcamp partition anymore. I really don't want to have Windows anymore, but I messed up thinking I would be able to recover my files. I tried following these answers but none of them worked for me. Now I can try to boot into Windows, but it gets into a disk error.
    - I tried this solution without any success: http://nerdr.com/bootcamp-partition-lost-repairing-mac-partitions/
    - I tried LonerT's solution on this post but it was hard to apply to my case: https://discussions.apple.com/thread/6574886
    diskutil list /dev/disk0
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            550.3 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                249.0 GB   disk0s4
    Could anyone give me some hints? I tried following other solutions but I don't really grasp how partitioning works on the OS X.
    Thanks anyhow

    sudo fdisk /dev/disk0
    Password:
    Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE    0   0   2 - 1023 254  63 [         1 - 1467197439] <Unknown ID>
    *2: 07 1023 254  63 - 1023 254  63 [1467197440 -  486326272] HPFS/QNX/AUX
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused    
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
    sudo gpt -r -vv show disk0
    gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
    gpt show: disk0: Suspicious MBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: disk0: Sec GPT at sector 1953525167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6       
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1074902336      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      1075311976     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1076581512   390615928       
      1467197440   486326272      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1953523712        1423       
      1953525135          32         Sec GPT table
      1953525167           1         Sec GPT header
    Apparently the Bootcamp partition isn't starting where it should be, since I resized it.
    EDIT (forgot TestDisk):
    TestDisk 7.0, Data Recovery Utility, April 2015
    Christophe GRENIER <[email protected]>
    http://www.cgsecurity.org
    Disk /dev/disk0 - 1000 GB / 931 GiB - 1953525168 sectors (RO)
    Current partition structure:
         Partition                  Start        End    Size in sectors
    1 P EFI System                    40     409639     409600 [EFI System Partitio
    2 P Mac HFS                   409640 1075311975 1074902336 [Macintosh HD]
    3 P Mac Boot              1075311976 1076581511    1269536 [Recovery HD]
    Warning: number of heads/cylinder mismatches 255 (NTFS) != 1 (HD)
    Warning: number of sectors per track mismatches 63 (NTFS) != 1 (HD)
    4 P MS Data               1467197440 1953523711  486326272 [BOOTCAMP]

  • Bootcamp drive not showing up in Lion

    hi! ^^
    Bootcamp drive not showing up in Lion.
    Lion is just downgrade version of Leopard.
    nothing changed but good functions are disappear.
    c:/aaa folder? i can not access directly from os x boot.
    haha.

    Click Start, then click All Programs.
    Click Accessories, and then click Run.
    Type regedit, and then click OK.
    If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
    MAKE BACKUP OF REGISTRY
    In the navigation pane, locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    In the right pane, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
    On the Edit menu, click Delete.
    When you are prompted to confirm the deletion, click Yes.
    In the right pane, click LowerFilters.
    Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
    On the Edit menu, click Delete.
    When you are prompted to confirm the deletion, click Yes.
    Exit Registry Editor.
    Restart the computer.

  • ITunes shows the music and audiobooks I've loaded to my iPod Touch, but they do not show up when I try to play them.

    iTunes shows the music and audiobooks I've loaded to my iPod Touch, but they do not show up when I try to play them.  I reconnect to iTunes and it shows the music and books as being loaded on my iPod.
    Sometimes the audiobook will play, then disappear from iPod's play menu after I reconnect to iTunes and load more music.  I've got plenty of free memory, and iTunes shows the files still on iPod.
    ....or should I just roll it back to iOS 5...  never had these kinds of issues with the old OS.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all AB and resync
    To delete all ADgo to Settings>General>Usage>Storage>Manage Storage>AB and try deleting them from there
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • HT1304 I have an iphone5 and i did the upgrade.  Now all of the music videos that I have purchased on itunes do not show up when the phone is held horizontally.  It is just a picture of album covers.  Any thoughts?

    I have an iphone 5 and I did the upgrade.  Now all of the music videos that I purchased on itunes do not show up when I hold the phone horizontally.  It is just a picture of album covers.  Any thoughts?
    thank you

    someone swapped upgrades.  Phone could have been sold For quick cash. 

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • I downloaded an app in the itunes app store on my pc and it's in my library, but it will not show up when i click ipod then apps?

    I downloaded an app in the itunes app store on my pc and it's in my library, but it will not show up when i click ipod then apps?

    You need to sync the app to the iPod
    iTunes: Syncing media content to iOS devices and iPod       
    Is the app compatible with your model iPod and iOS?
    Are any Restrictions set that would prevent installing the app on your iPod? Settings>General>Restrictions
    Do any apps no sync to the iPod?
    Does any media now sync to the iPod?
    Have you successfully synced aps to this iPod from this iTunes library before?

  • I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available.  Does not show up when I search for it.  Plenty of memory . . .

    I Have an iPad mini running iOS 7.1.2,  I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list.  It does not show up when I search for it so can't open t that way either.  It doesn't require iOS 8.  Can't delete and reinstall, cause not icon.  This is not a normal "app won't open" question.  it doesn't start the. Stop it just doesn't seem to exist.  Any help is appreciated

    Hello Chelleuri,
    Thank you for using Apple Support Communities. 
    The following article provides information to trroublehshoot issues with installed apps, including not opening.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Regards,
    Jeff D. 

  • My mac will not show images when on the internet?

    My mac will not show images when on the internet?  I think I have inadvertently changed some settings but nor sure which one.

    I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences.  Under the Apperance tab there is a check box that is called "Display images when the page opens".  Check if that is unticked.

  • The names of my contacts are not showing up when I receive text messages

    The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

    This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

  • SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

    Hi
    I keep seeing this issue albeit intermittently.  I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc)  . They all appear perfectly most of the time except the lookup column. Sometimes is just
    decides to display the title field of the current library and not the lookup list title .  It is weird as it has been working perfectly for ages given the library is populated with valid documents.
    There are some fixes listed here. Has anyone got any experience of this?
    https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
    Freelance consultant

    Hi,
    According to your post, my understanding is that the lookup  column not display well while editing in word.
    Did you customize the Document Information Panel?
    I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
    https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
    Or you can also use the methods in the post you have pasted to check whether it works.
    As the limitation of the environment, we could not reproduce the issue in our environment.
    I  would suggest you open a case to Microsoft Customer Service via Phone.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • How do i get my contacts to show up because they will not show up when i go to my contacts

    How do i get my contacts to show up because they will not show up when i go to my contacts?

    Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

  • I have a new iphone that is not showing up when I attempt to sync to itunes

    I have a new iphone that is not showing up when I attempt to sync with itunes

    Windows or Mac?
    iOS: Device not recognized in iTunes for Windows
    iPhone:  Device not recognized in iTunes for Mac OS X
    Robert, if you are using a Windows based computer, often disabling anti virus software and turning off the Firewall on the PC can help.
    iTunes for Windows: Troubleshooting security software issues

Maybe you are looking for

  • Scheduler Service Status failed - XIMDD Upgrade to 9.1.0.2 BP09

    Diagnostic Dashboard Test Result failed Scheduler Service Status Details: java.io.FileNotFoundException: http:/10.10.10.11:80/xlScheduler/ddstatus at sun.nt.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1147) I noticed tha

  • Text elements in smartforms

    Hi guys, I am working on a smartform. I wanted to know how do i put a checkbox in my text element in my smartform? Please help me out on this. Thanks and regards, Frank

  • FCPX export error when exporting

    When I try to export a project it gets to a certain point,then stops with a message,ERROR-1. It indicates a bad frame

  • Trying to return the size of the bag's range

    can some one help me with these... im not sure if i just need to do a return statement. if someone can give some advice that would be great.. thanks         public interface BagOverIntRange {       * Returns the size of the bag's range (high - low +

  • SAP Patch :'Error reading the standard sequence from the document tables

    Hi Experts, Please help! Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly. We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of t