Bootcamp problem while downloading software

Hello,
I'm trying to install Windows 7 via bootcamp assistant, but I've always the same problem.
While downloading the newest software and drivers for my mac book air (this is the first step of all), the download aborts with the message
"The software can not be installed because it is not available on the software update server."
Well, I tried it about 20 times or more, today, yesterday, ..!
Anybody has an idea?
Best regards,
Florian

Sometimes, Boot Camp Assistant doesn't work with the process of downloading the Boot Camp drivers.
As you say you have got a Late 2010 MacBook Air, these are the drivers you need, so download them from the Apple site > http://support.apple.com/kb/DL1630
Follow Apple's steps to install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1559/en_US/Boot_Camp_Install-Setup_ Late2010.pdf

Similar Messages

Facing problem while downloading software 7.0.3

Hi, I am using iPhone 4S and yesterday night, I decided to upgrade the Software version 7.0.3 and started however after complete the download my phone is showing apple logo and off an again show logo and off... Which is still continue... Please help my phone is not working

You are in Recovery Mode. Follow step 1 to step 3 very closely to recover your iPad.
http://support.apple.com/kb/HT1808

10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wont update message displays: An error has occured while downloading software .......

please help!!
Iam trying to update my playbook 16GB but each time i accept and try to apply the update i get a pop up in middle of screen saying:
An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists.
now this is driving me insane no matter what i try it doesnt seem to manage to get past this step of the update!!
Has anybody got ANY tips or advice please!!

Without knowing if you have received an update before it's difficult to be sure. The last update was feb 2013 so don't know why you need an update, unless it's a wipe or a repair.
Lets assume you live in the "western world" then try a friend's house or a free wifi spot to do the update. it's easy for playbook to get upset with router wifi settings.
Sarah.

Japanese character problem while downloading file to application server

Hello All,
We are facing a strange problem while downloading a file to application server when file contains japanese text.
We are downloading vendor and customer information in a flat file format on application server. When the login language is EN program show ouput in a properly formatted manner.
When the login language is JA (japanese) program does download file with customer vendor data. I can see the description is japanese language but the formatting is gone for a toss.
We are facing similar issue with other programs downloading files on the application server.
I am using OPEN DATASET........ENCODING DEFAULT. and working on unicode enabaled ECC 6.0 system
Quick help appriciated.
Thanks!

Hi
Sometimes this also happens because of your desktop setting.Make sure that your OS also supports the JAPANESSE language.
Ask your technical support team to enable them in your desktop.
Thanks & Regards
Jyo

Facing a Problem while downloading the data from ALV Grid to Excel Sheet

Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
   I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.

hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
     data : begin of itab occur 0,
                    matnr like mara-matnr,
               end of itab.
create new like this,
           data : begin of itab occur 0,
                    matnr(12) type N,
               end of itab.

Problem while downloading OS X Lion

I have an annoying problem while downloading the OS X Lion at about 60-70 % of the download its says that my internet dropped out try again, i've try this many time and still the same problem at 60-70% of the download. What can i do any suggestion?
thanks

Do you have the Install Mac OS Lion.app in your /Applications folder?
If so double-click to install.
If you no longer have the download then go to MAS > Purchases tab, hold option and download again.

While downloading software update for Itunes, getting message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!

While downloading software update for Itunes, got message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!

No promises but a System Reset is worth trying:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.

Facing problem while downloading ALV grid Output into Excel

Hi Guys,
I am facing problem while downloading ALV grid Output into Excel.
It is downloading into excel, but all character columns first and next all quantity columns it is displaying. But I need columns order as it is in the grid.
If I take all columns as characters it works fine. But it will be problem for calculating total, subtotals of quantity columns
Can someone help me regarding this
thanks for your help

Hi,
Open up Excel on your desktop. Goto Tools > Macro > Security.
Make sure that your security is set to Medium (or less). SAP uses OLE automation to run the Excel instance and in Office 2003 (for example), Microsoft has increased their default security setting to High. With the High setting, the output to Excel fails.
Was this your problem? Don't forget those points, either.
check with this wetther it is solved or not.
Regards,
sana.

HT1338 Problem while downloading the update for the Macbook 10.8.2

Dear Mr/Mrs
This Abdelhameed Ata
I just bought A MACBOOK PRO, and I'm facing this problem that I can not shut down or restart the device because of this following reason.
The device it forze while downloading the software, I mean i can use the laptop but the downloading has stopped or forze . so please help me what am I suppose to do?

Perform a Permissions Repair using Disc Utility...
Verify or Repair Disk Permissions
Then Restart your Mac.
Next...
Go here > http://support.apple.com/kb/DL1581 and Download and Install the Combo Update.
After a Successful Install be sure to Restart your computer.

Problem while downloading a ALV report to excel

Hi experts,
I have an ALV report which took long time to extract records from various table. So while there is some restriction the report can be executed well in foreground. And the report can be extracted well to excel sheet. But while there is hudge records, i have to execute the report in backgroung. And then from spool i generally prefers to download the report to excel.
There is a field UOM where it contains value ' " ' for some records. And also there may be possiblity that other fields can also contain the same.
Now my problem is: while download to excel... When ever there is a value ' " ' from this point to the next value ' " '. It is treating as one record. and keep that in a same position in the excel sheet.
But i want to keep all the values in there respective fields. Can you please how can i do that? Please give me some solution...
regards,
charles.

If anybody have any solution please send me....

Problem while downloading the alv output to excel file.

Hii,
While downloading the alv output to an excel file i am facing a problem. Either the output comes as 1.23456E+11 or the values get cut .
Cant put in txt file as the users require to calculate directy and i have even tried to increase the output length .But both doesnt help.
So what are the other ways to do so.
Edited by: mansi_v27 on Mar 24, 2010 12:35 PM

Hi,
Welcome to SCN!!!.
Please go through the forum rules. This has been discussed many times. You can search in the forum for this.
Infact there is no problem. Just expand that excel cell. You can see the full value. This is standard excel property.
Thanks,
Vinod.

Problem while downloading ALV GRID Output to Local Spreadsheet(Excel) File.

Hi,
I am displaying output in ALV GRID. While downloading the output to Excel file using "Local File" option provided by ALV.
But while downloading the columns and their respective values are coming in single column vertially of excel file instead of horizontal.
e.g. Grid output is as follows.
F1 F2
V1 V2
(F represents Field Title, and V represent Value)
Downloaded Excel File content:-
F1
F2
V1
V2
Please help.

Hi ,
Please use below FM :
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\Documents and Settings\akshayr2403\Desktop\docs\rep.xls'
FILETYPE = 'WK1'
WRITE_FIELD_SEPARATOR = 'X'
tables
data_tab = it_vbak
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Also, if your problem still persist, please refer SAP's demo code on ALV "BCALV_FULLSCREEN_DEMO".
There are many sample codes available, what you need to do is just go to SE38 and put BCALV* and do F4.
I hope this will help you.
Regards,
Rahul Mahajan

Problem while downloading Chinese chatracters into an excel file

Hi All ,
While downloading Chinese characters into an excel file , using GUI_DOWNLOAD function module , im getting JUNK Characters instead of chinese characters.
But if im downloading the same chinese data into an text file or unix file , there is no such problem.
Thanks in advance and points will be rewarded for helpful answer.
Regards,
K.S.R

Hi, I have the same problem. Anyone has solution now?
Wu Hao
2008/08/21

I cant download ios 6 from itunes its says there was a problem in downloading software

i cant download ios 6 from itunes its says there was a problem in downloading software

i have a same problem bigfoo.. i mean whenever i do it...downloading goes halfway but after that it says an error occured

Bootcamp problem while downloading software

Similar Messages

Maybe you are looking for