Bootcamp problems on 24" Imac

So I installed windows 7 ultimate on my 24" Imac 2.93GHZ with a Nvida GT 120.
I installed the boot camp software on windows, which installed the graphics driver and everything.
Anyway so I downloaded Dungeons and Dragons online cause I wanted to see how the performance is.
When I run it, it says no sutible graphics drivers were found, check to see if your system meets the requirements.
Which it does, the game is quite old and could run on a old Geforce 6600.
So I went to Nvidia to look for the driver, I thought I found the right one, downloaded it, but it didn't work saying that I didn't have the card. Am I supossed to download the mobile version of this driver?
Thanks!

I think you would get more hits on your question if you posted it on one of the Bootcamp forums. One I'd recommend is:
http://discussions.apple.com/forum.jspa?forumID=1245
Regards,
Roger

Similar Messages

  • Windows 7 bootcamp problem, for my iMac

    I am trying to use bootcamp to instal Windows 7 on my iMac desktop, But I keep getting a message saying no support download is availible.
    What do i do to get bootcamp working?  I need windows for School for my engineering class and C++ classes.  Can Anyone Help?

    Welcome to the Apple Support Communities
    You are running Snow Leopard. On Snow Leopard, you can't download the Boot Camp drivers from Apple because you have got drivers on the Snow Leopard DVD that came with your Mac or you bought. Just skip the step to download drivers

  • Windows 7 Bootcamp problem?

    Hello people,
    Let me start from the beginning. I have been trying to make a bootcamp partition on my iMac mid 2007 to run windows 7 on. This has been a very bumpy road so far and now I'm stuck at a bump. So far, this is what all I have done:
    1. Use bootcamp support to create a bootcamp partition.
    2. Install windows 7 from disk.
    This is where it gets bumpy. At the completing installation portion of this, my screen goes black, and doesn't return. Easy enough, its probably a driver problem. So I
    3. Restart and boot to CD into repair my computer.
    4. Go to command prompt, and issue the command DEL C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMDAG.SYS
    5. Restart. Says "Preparing computer for first time use."
    Good from here right? WRONG. New error message: The computer restarted unexpectedly or encountered an unexpected error. Press OK to restart and restart installation. After some searching, turns out a quick registry fix can solve this problem.
    6. Press shift+f10 to open CMD. issue command regedit.
    7. Go to the setup part of the registry (HKeyLocalMachine/System/Setup/Status/ChildCompletion) change the value from 3 to 1.
    8. Restart. Setup continues, finishes, boots into Windows 7 and 800x600 resolution.
    9. I go to screen resolution, and change it to max, and it works. Everything is great almost.
    Now, remember that atikmdag.sys file I had to delete to get the setup to reappear instead of that black screen? Well turns out, with that file gone, my computer now reads my graphics driver as corrupt or as having a problem, preventing many games and applications from booting up without giving a graphics card error. THIS is where I am stuck now. If atikmdag.sys is a vital file to the driver for the graphics card, how can I keep it where it is, but still boot up without a black screen? Reinstalling my video driver or reinstalling the bootcamp drivers cause the black screen or blue screen of death, so I have to delete that .sys file again to boot correctly. But without this .sys file, it seems my computer will always throw the corrupt/problem error at me?
    Let me say, I have tried to download the catalyst drivers and use the atikmdag.sy_ file from there and issue the command "expand.exe atikmdag.sy_ atikmdag.sys" to make a new sys file for it, and this works and it boots with the file, but device management then throws the error that all of the packages arent signed correctly and refuses to boot the driver at all. Any help?
    Cheers, Adam

    easy enough, just confirm that you have no other usb devices connected to your mac
    where is your current w7 disk from? we're going to make a new one unless you tell me its a retail disk
    dl a fresh w7 iso from below and google bootable iso disk on osx for steps
    http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
    open boot camp assistant and if you have an option to delete/remove windows, do that
    open disk utility and confirm that you only have 1 partition ('mac hd' unless you've renamed it), if not you need to get back to 1 partition

  • I have a Bootcamp partition on  my Imac with Mavericks which I can't delete because the Partition Layout is greyed out and is stuck on 'Current'. What can I do?

    I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
    I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
    Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
    What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.

    My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
    Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

  • Image Persistence a reoccuring problem on 24" iMac

    Hello fellows,
    For the past few months now I've had problems with Image Retention/persistence. The thing is, I've had things in place for longer without them leaving a ghost, and the amount of time it takes to ghost seems completely inconsistent, and seems to happen faster recently.
    The thing is, 3 out of 4 times this has happened (and im not sure about the 4th) happened while I was on my Windows 7 bootcamp partition.
    Granted, I do play computer games on my windows partition, but only one time has the HUD of the game actually been what became ghosted, and that was only after an hour or so of gameplay (and the most recent incident)
    I'm getting rather worried about my monitor. I know the ghosting goes away after leaving the monitor off, and I do have screensavers and monitor sleep set on both my mac and windows partitions, but it seems to be happening more quickly lately. Could it be an issue with the monitor and Windows 7? And could I get a replacement from Apple? (I bought the iMac last August so I'm fairly certain I've still got warranty)

    I'm having a similar problem with my iMac.
    I just noticed yesterday that some of my desktop icons are leaving ghost images. Unfortunately, the images are not disappearing after turning the monitor off.
    There have been times that I needed to turn off my screen saver, but I don't recall leaving the monitor on for very long. Plus, I thought I understood that image persistence was not an issue with LED monitors. Guess I was wrong.
    I've had my iMac for just under two years. I hope there is some kind of relatively easy solution.
    It will be interesting to hear from others.

  • I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off.  How do I fix this?

    I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off.  How do I fix this?

     
    http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup 

  • I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

    I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

    Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
    Check Settings > General > Restrictions

  • Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

    Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

    Hi, Derek -
    ...the screen splits into 4 areas and open windows seperate and shrink.
    Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
    It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

  • Can I install Windows 7 (32/64 bit) with bootcamp 3 on an iMac 11,3 (mid 2010)

    My cousin has an iMac Mid 2010 (11,3) and installed Windows 7 (32bit) on a Bootcamp Partition (NTFS) with 100GB.
    But after trying to boot with windows, the boot stops and Mac OS comes to front......
    Is it possible to install Windows 7 with bootcamp 3 on an iMac?
    Apple says only XP or Vista 32 bit is possible....
    But here I read Windows 7 also.... ?!
    What's going wrong?

    Hello trollius,
    The following article may be useful in getting you moving with your install of Windows 7.
    Boot Camp: Installing Windows 7 Frequently Asked Questions
    http://support.apple.com/kb/HT3986
    Best regards,
    Allen

  • Problem description: My iMac (early 2008) with OS 10.10.2 runs slow.  I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

    Problem description:
    My iMac (early 2008) with OS 10.10.2 runs slow.  I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
    EtreCheck version: 2.1.8 (121)
    Report generated April 14, 2015 at 9:50:48 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (24-inch, Early 2008) (Verified)
        iMac - model: iMac8,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR2 SDRAM 800 MHz ok
            BANK 1/DIMM1
                2 GB DDR2 SDRAM 800 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 8800 GS - VRAM: 512 MB
            iMac 1920 x 1200
    System Software: ℹ️
        OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
    Disk Information: ℹ️
        Hitachi HDS721010KLA330 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        [killed]    com.apple.warmd_agent.plist
        11 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nesessionmanager.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    org.cups.cupsd.plist
        12 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        ChronoSyncBackgrounder    Application  (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
        Google Drive    Application  (/Applications/Google Drive.app)
    Internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 6.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
        iPhotoPhotocast: Version: 7.0
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        WebEx: Version: 1.0 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    3rd Party Preference Panes: ℹ️
        Adobe Version Cue CS2  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        VIA PrefPane  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             3%    WindowServer
             3%    Mail
             2%    com.apple.iCloudHelper
             1%    Creative Cloud
             1%    Google Chrome
    Top Processes by Memory: ℹ️
        223 MB    Google Chrome
        150 MB    Finder
        129 MB    Google Chrome Helper
        112 MB    Mail
        69 MB    Google Drive
    Virtual Memory Information: ℹ️
        35 MB    Free RAM
        1.45 GB    Active RAM
        1.45 GB    Inactive RAM
        888 MB    Wired RAM
        27.01 GB    Page-ins
        851 MB    Page-outs

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I have a problem with my imac screen there is a degradation in the display

    I have a problem with my imac screen there is a degradation in the display at the toplight is less intense as if you were at rest and half way on this but not if it's some software problem or please someone help me thanks.

    Still in guarantee? Apple Care? Bring it to an Apple Store oder Apple Service Provider.

  • Lcd or inverter problem? for iMac 21,5"

    Hi,
    I'm a serius problem with my iMac (late 2009)...
    this is the video of my problem http://www.youtube.com/watch?v=OnYgjL04hKs
    what do you think about this?

    It needs to be taken in and professionaly diagnosed. Take it to an Apple Store or AASP, you can use Apple Online Service Assistant to locate one. If you purchased AppleCare this should be covered with no problem.

  • Problem with my iMac 10.1 (21.5")!

    Please! Help me! I have a problem with my iMac 10.1 (21.5")! The coolers are spinning very quick! I think what it is problem with SMC. I have already reset the SMC, check the temperature sensor, reset the PRAM and NVRAM, but it is not help! What you adwise me?

    I think you mean you are getting the Spinning Beach Ball (commonly called the Spinning Beach Ball of Death or SSBD), this can be caused by many things. The SSBD can be caused by lots of different things, however the most common is a computer that has not enough RAM or Disk Space or possibly a runaway process. Leave Activity Monitor (Applications - Utilities - Activity Monitor) open and while the computer is operating normally check the amount of FREE RAM. You will find this under the System Memory tab. In most cased FREE RAM should be above 500MB, if you are at or below 500MB then it's time for a RAM upgrade. It will look something like:
    If you have a runaway process look in the column that says %CPU and look for somethign taking a large % of CPU.
    For how much free HD space you have in a new Finder window click the internal HD and then either right click it and choose Get Info or use Command I (I as in Ivan) and check the size of the HD and the amount of available space. OS X likes 10-15% of the total HD available. For example if you have a 500GB HD and you have 75GB or less available then it's time to begin freeing up HD space. This is a rule of thumb, some systems work OK with less however some do not so it's always best to error on the side of caution if you are nearing the 10-15% rule and off load some data to and EHD.
    Finally you may also benefit by troubleshooting your issue by reading and using the Spinning Beach Ball of Death article.

  • I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

    I cannot connect to FaceTime, encountered "error processing registration, please try later" message on my Macbook Air, but I don't have this problem on my IMac. Can anyone help?

    I have the same problem on my iMac. My facetime has been working, but now I'm getting the same error as You. I've been through the following:
    The stuff that Linc Davis suggested, new profile on iMac, moved iMac into DMZ zone with no firewall rules, tested with other Apple-ID, checked hosts file, checked different timezone settings, tried to connect to 2 mobile APs (with diferent providors), changed DNS servers (ISP's DNS + Google DNS + Open DNS) - Nothing helped. Also talked to Apple Support, since i have Apple Care, but the seem to be a bit clueless also Well I've mailed them the results of my different tests, so lets see what they come up with - Unfortunately I'm sure it will be the same suggestion as all the major PC manufactures suggests, reinstall and test - RIGHT !!!!!!
    If I get solution, I'll post it here.
    Kind Regards
    Kim

  • Hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

    hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

    Have a look at some of the suggestions in this link:
    http://support.apple.com/kb/TS2570?viewlocale=en_US&locale=en_US (Russian is available from the link within the article (top right of the page).

Maybe you are looking for

  • Transfer pix in emails to iphoto

    how does one transfer or automatically have transfered photos in email to iphoto library?

  • Help! iWeb domain issues

    My daughter is trying to edit a website created by someone who no longer goes to her college and will not give permission to the webpage. It is property of the college, but apparently that doesn't matter to this individual. Is there a work around to

  • Read dynamic created node..

    Hi experts, I have created a node dynamically , and also added some attributes dynamically. How to read the structure of that node, so that i could able to read the data in the node. Pls help , am stuck in this............ Thanks Aisurya.

  • Multiple part audio books: each part appears as a seperate book.

    Hi, 1. Is there no way to report an error in an official way to Apple? 2. Before upgrading 3Gs to 4.0: when an audiobook in multiple parts was copied, there would be one (and only one entry) in the audiobook list on the iPod. Tapping this entry would

  • Desktop Muse site loads then disappears entirely on iOS

    Hi all, I have recently launched a new desktop site designed in Muse. I have not had time yet to build tablet and phone versions. I assumed the desktop site would at least load in the meantime. What I have found is that the site will load on iPhone/i