Bootcamp selection screen fuzzy

I've noticed in the last few days when I'm at the Bootcamp drive selection screen the type is very fuzzy. You can barely read the drive names below the icons. Once the computer finishes booting everything seems fine regardless if you choose the Window bootcamp drive or the Mac OS X Drive. Any ideas on what's going on and how to fix this?

I ran the test and it came back with no problems found. On the restart I held the option key to invoke the drive selection screen and the type was crystal again. Last night when I was working on this I went thru 4 or 5 restarts and the issue was there every time. There where no devices plugged into any of the ports last night as well. Any ideas?

Similar Messages

I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

Hey folks,
I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
I searched all morning and didn't find anything, was hoping that someone might have an idea.
Thanks in advance

Search again. Microsoft has tips on what to do and Windows has a number of features
system restore points
automatic system repair using the Win7 DVD
system restore image creation
Just like you would with OS X Lion and Lion Recovery and Repair
Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
rollback to last known good boot check point
rollback a driver or program or any changes
clean out temp files
clean registry
chkdsk
https://discussions.apple.com/people/The%20hatter?view=bookmarks

Boot Camp - HD selection screen

Hello,
I have been searching for awhile and cannot find and information regarding this. I have a Razer Deathadder 3500 series mouse and when I go into the Boot Camp HD selection screen my mouse movements are inverted. Up is down and down is up. I am not sure why this is or how to fix it. Does anyone know?
Thanks,
Brad

Try a new post in the BootCamp USB, Mouse, etc. forum. This is the 10.6 forum and we don't cover BootCamp issues.
DALE

Why is the Boot Disc Selection screen always appearing?

WIth a bootcamp partition on an iMac booting while holding down the Option key will cause the boot disk selection screen to appear, but suddenly I'm getting the boot disk selection screen even WITHOUT holding down the Option key. Why?

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

Regarding Selection Screen field making display field in ALV report

Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shailesh

hii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta

Help Needed in At selection screen output

Hi Experts,
I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
Thanks in advance for all your help.

example from a checkbox in one of my progs..but you can do same approach with radio butts
parameters p_test as checkbox default abap_on user-command test.
at selection-screen.
    if sy-ucomm = 'TEST'.
      perform birth_mnth_chck.
    endif.

Help needed in selection screen - Urgent

Hi Experts,
I have a selection screen. I have three radi buttons in that selection screen. Based on the selection of the radio buttons I need to activate corresponding selection screen parameters.
e.g : if radiobutton1 is selected, njo activation needed,
       if radiobutton2 is selected, activate selection screen parameter p_one,
       if radiobutton3 is selected, activate selection screen parameter p_two.
All three radiobuttons are attached to the same radio button group.
I have assigned the parameters p_one, p_two, p_three to MODIF ID as follows.
p_one - NULL
p_two - t01
p_three - t02.
on the selection of a radio button I want the corresponding parameter to get activated.
please help me.
Regards,
Arul jothi A.

hi
jothi
AT SELECTION-SCREEN OUTPUT.
CASE SY-TCODE.
    WHEN 'ZEDI6'.
      LOOP AT SCREEN.
        CASE SCREEN-GROUP4.
          WHEN '001'.                  "Sales order select
            SCREEN-ACTIVE = '1'.       "1=Active, 0=Don't display
            MODIFY SCREEN.
          WHEN '002'.                  "Delivery select
            SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
            MODIFY SCREEN.
          WHEN '003'.                  "Invoice select
            SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
            MODIFY SCREEN.
          WHEN '004'.                  "PO Select
            SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
            MODIFY SCREEN.
regards
praveen

Compare the input filename in the selection screen

In the selection screen input field
there is an option of selecting the directory and file name and not the extension .
This is used to download the datas
Extension can be selected by using the option button
rtf
csv.
the user has to give only the filename and not the extension.
suppose if the user input is C:\temp\file1.rtf.
Either i should take only the filename
or i should display the message give only the filename and not the extension . its already been selected!!!!
I want to compare the input string contains .doc
how to do the comparison and to get the above results mentiond
Thanks in advance

Because the requirment is there are two option buttion for selecting the download file format
But unknowingly if the user gives the filename along with the extension. I need to handle that error
giving some error message or information message
By comparing the last 4 letters of the filename.. either.doc or rtf or csv or watever
so how to do that
then after comparing that i should give the user a msg doc type is already selected give only the filename
I hope u understand my req

Change selection screen in LDB (KDF logical database - NOT HR)

Hi All,
Iu2019d like to use KDF logical database to keep the dynamic selections since user wants to use it but I need to change the selection screen itself. The existing variants for KDF donu2019t meet the user requirements. Some fields I need to hide some add. Like I want to u201Cremoveu201D the field u2018Posting periodu2019 (MONAT) (which is available in dynamic selection screen) and put it on the u201Cmainu201D selection screen.
Do I need to create my own logical database or there is a way around?
Could someone give me a practical advice or sample of solution?
Thanks a lot.

Thanks Himanshu,
I did as you suggested but problem is that it does not allow me to hide the whole block.
I have 3 filelds actually on block KD_0 I need to hide (its from selection screen of KDF logical database.)
SELECT-OPTIONS: KD_LIFNR FOR LFA1-LIFNR MATCHCODE OBJECT KRED.
SELECT-OPTIONS: KD_BUKRS    FOR LFB1-BUKRS.
SELECTION-SCREEN END OF BLOCK KD_0.
PARAMETERS KD_INDEX AS SEARCH PATTERN FOR TABLE LFA1.
What I did is below. I used sp instead of u201C=u201D since it has many screen for field KD_LIFNR(for frame, text etc).
And when I did just for KD_LIFNR it was hidden but when I did the same for KD_BUKRS it was not hidden . The field has stars u201C*********u201D in it.
Same happen with KD_INDEX. The name of the field is hidden but field not and it filled with ********. Do you have any ideas what it can be?
I debugged it to catch all screen names but no luck
loop at screen.
    if screen-name cp 'KD_LIFNR' or
    screen-name cp 'KD_BUKRS' or
    screen-name cp 'KD_INDEX' or
    screen-name = '%B000003_BLOCK_1000' or
    screen-name = 'SSCRTEXTS-FRAME_TEXT' or
    screen-name = 'SSCRTEXTS-MCID_TEXT' or
    screen-name = 'SSCRTEXTS-STRNG_TEXT' or
    screen-name = 'SSCRFIELDS-SEARCH_BTN' or
    screen-name = '%B025008_BLOCK_1000' or
    screen-name = '%F021010_1000' or
    screen-name = 'ALCUR' or
    screen-name = '%F022012_1000' or
    screen-name = 'EXCDT' or
    screen-name = 'SSCRFIELDS-UCOMM'.
      screen-invisible = '1'.
      modify screen.
    endif.
endloop.

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

Need to restrict selection screen entries in logical database in HR report

After creating custom HR Report Category using Logical database, I need to restrict the options available in the in the selection Screen
for example- for company code i m getting 182 entries, but after running the program, selection-options for company code, i need only first 3 entries, don't want remailing entries
how can i do this?

Hi
You can retrieve the required entries into an internal table and use FM F4IF_INT_TABLE_VALUE_REQUEST to provide them under F4 help.
Regards
Raj

Selection Screen in Report Painter

Dear Experts,
I have an issue in the report painter. While executing the report from GRR2, selection screen is not displayed but report is coming as I expected.
I want to create the selection screen for this report. I have created this report without copying from the standard report.
Thanks in Advance.
Regards,
Aswimn

Hi,
Please refer following links.
<Link farm removed by moderator>
Regards,
Renuka S.
Edited by: Vinod Kumar on May 25, 2011 10:12 AM

HR ABAP - PNP selection screen

Hi Friends,
I am executing the standard report with PNP logical database .
But in the selection screen when I click on further selection and select the parameter company code.
Now I entered the company code "0060", but I am getting the out put for both company code 0060 and 0020,
here I need the out put only for the person which are belongs to company code 0060, but I think the selection screen company code was not controlling the out put.
Also I checked the Infotype internal table p0001, here I am able to see both the company codes, and for that person the process is continuing and I am getting the out put for the company code 0020, bcz the current/valid record for this person is 0020.
Request to let me know any issue there?
Magesh.S

Hi,
You need to set "person selection period" dates, in order to list values with selected parameters.
Daniel

Logical database : user defined selection screen

Hi Experts,
I am working with HR-ABAP. The logical databases provide a selection screen......but i want to use a selection screen of my own and not that of the LDB.
Plz help...............

hi do like this....
go to attributes-->hr report catagory-->master data...here use the value _____000(5underscores and 000 )..
you wii get that..
regards,
venkat

Logical database sdf in custom program not triggering selection screen?

I added logical Database SDF (screen 905) to a custom program - but the selection screen is not getting triggered.
Do I have to associate these somewhere?
Thanks,
Ven

HI,
Declare this statement after the Report Statement in the program.
TABLES : SKA1, SKB1.
You will get the selection screen now.

Bootcamp selection screen fuzzy

Similar Messages

Maybe you are looking for