Bootcamp start flashing question mark

Hello!
When I want to start my MBP 15-inch, Mid 2010 with bootcamp partition /start machine ALT, chose bootcamp partition/ I see only a folder with flashing question mark. It happened after when I change system 10.9. It was a clean installation /with usb, erase the Mac OS X/
I make ALT + CMD +P + R when start the machine, but nothing change.
I check DU smatr the hdd is verified.
I try to reinstall the windows7, but after installation when restart the machine, same folder with flashing question mark.
My OS X is working fine, if I put DVD, or USB I can start. Only the bootcamp not working.
I go to bootcamp and it shows me: "The startup disk cannot be partitioned or restored to a single partition." I can chose only "OK" , and after "Go Back"
On my machine I have 3 partition: -1 OS X -2 data -3 Bootcamp
Before I install the new system it was ok!
My old system was 10.6.3, a month ago I upgrede at 10.6.8. On the bootcamp partition it was windows 8.0.
The partitions was same like now, I not changed.
How can I install again the windows?

Just replace the hard drive.
If he lost data, look at data recovery services*:
http://www.macmaps.com/backup.html
And in the future always recommend people backup important data frequently.
If he still gives you death threats, call the police.
- * Links to my pages may give me compensation.

Similar Messages

Macbook pro wont start flashing question mark.

I sold a macbook pro i owned since new and it arrived with the buyer yesterday now im getting death threats!
I freshly installed 10.5 leopard on my mbp and used it for 4 hours without issue.
I did have a problem after installing ms office and deleted it and all preference files in same folder and worked ok after that. rebooted 3 times no problem.
The buyer is freaking out saying its trashed and wont boot just has a flashing question mark, why would this be happening???
Please help he's threatening me!

Just replace the hard drive.
If he lost data, look at data recovery services*:
http://www.macmaps.com/backup.html
And in the future always recommend people backup important data frequently.
If he still gives you death threats, call the police.
- * Links to my pages may give me compensation.

Flashing Question Mark Folder on Start-up

I recently starting having administration issues with my Mac Mini.
I went to update to OS 10.5.7 and when the administrator box came up asking for my password, my name was missing. After putting in the correct information, was unable to update, but received the message what my clue to password was.
Anyway, I performed a safe startup, changed the password and tried again. Same issue as before. So I started up from the Start Up Disk, and ran Disk Utilities and verified the disk and repaired any permission issues. When I started up my Mac Mini from the hard drive, I still did not have my administrator password working.
At this point, the start-up ping is gone.
I reset the Pram and had the same issue. So, I saved all important files to an external hard drive and tried to do a clean install. I was unable to do the clean install.
I removed the hard drive from my Mac Mini and installed it into a friends Mac Mini. I had complete control of my computer with no administrator password issues, the ping was there, and I could reload all saved items and still not have any issue no matter how I started up the computer. I then performed a complete erase and reinstall and still had no problems.
I reinstalled the hard drive into my Mac Mini, and I now have the Flashing Question Mark Folder with gray screen on start-up and no ping. Can't fire wire to start up, can't clone, can't start-up from disk, safe mode, etc..
Any ideas would be helpful. Most likely I will be going to the Apple Store and seeing what they can do.

generally, the flashing folder mark means it can not find the startup drive.
if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

Flashing Question Mark At Start Up/ Disk Utility Not Working

I am having the old flashing question mark in a file show up when I try to start my computer. I went through a lot of the forums and I have attempted the Disk Utility. When I put the 10.3 install disk in and restart it takes me to the opening screen. If go to disk utility and start it and I have three options: 734.6 MB Pioneer DVD, Session 1, and Mac OSX Install Disk all with a CD icon by them. Not sure which one to pick. Even when I select any though, it does not give me the option to push the repair disk button. It is never available. Anyone know what to do here?

Exactly this happened to me two weeks ago. Unfortunately in my case it was a result of hard disk failure - my heads had burnt out and I had total data loss (I was fortunately backed up recently).
I would suggest taking your mac to a reputable computer firm, preferably Apple who can diagnose hard disk failure immediately. If that is the case you will need a replacement HD, which might be a good opportunity to expand HD size on your system (prices are always coming down; I took the opportunity to go from 60 to 120GB, for £140).
If you are not backed up and ABSOLUTELY NEED YOUR DATA then do NOT give your machine to Apple there and then however; despite assurances, you may never see your HD again, and at any rate once it has been removed it should be handled extremely carefully to prevent platter damage and compromising future data retrieval. It may not be treated with proper respect whilst a replacement is being fitted. Therefore take it to a data retrieval specialist first, who may also replace the HD for you anyway, at similar or lower cost. The cost of data retrieval is very variable but is generally about £500 if an 'invasive procedure' (HD repair) is necessary.
I hope this isn't your situation, but as I say these were exactly the symptoms of my HD failure 2 weeks ago.
Fulvio

Flashing Question mark Folder and clicking - no start up.

Dear Mac Users,
I've already got some info on the above, but my 3.5year old G5 iMac wont get past the flashing question mark folder icon. It can't find the start-up drive. The think the hard drive is dead - if I start up from external HD it's OK and/or Tiger CD - but the mac's HD is nowhere to be seen on any disk utility.
Just bought Disk Warrior - that wont see the iMac HDrive either - so unless anyone has got a fix, it looks like the thing will be dumped or I get a new HD. Are these easy to buy and fit? It's a Rev A model, (the buzzy first edition). I haven't got all my files backed up, just the key ones, which are now on a new alum iMac. Or I could run it off an external drive (noisy, though).
I had been moving the G5 around a lot (switched off) before it went belly up - could this be a cause?
Maybe it'd been feeling left out, with the new 24in installed.
Hope someone can shed further light.
Rob
(PS - anyone want buy my Disk Warrior?)

Your drive is dead, you can look in [macsales.com] or [smalldog.com] for a new new one. The drive isn't too difficult to replace, you can do it yourself, and do get the largest one you can afford, just make sure it's a 3.5" SATA.
Keep your DiskWarrior, you never know when it'll come in handy.

MacBook Pro 13 2010 running Mountain Lion: will not boot and shows a folder with a flashing question mark. Will not start in 'safe mode' i.e holding shift on start up - nor can I call up any utilities with the OSX shortcuts. Any thoughts?

Following an automatic update, the machine wouldn't boot. Screen came on (shows white) - then either showed a 'No-Entry' Sign and a spinning cog, or a folder with a qusetion mark. I tried to start the machine in different modes ( eg. holding shift after the tone ) but nothing worked. after leaving the machine alone for 1 hour. It worked perfectly again. I did a 'verify disk' check which found no problems. 2 hours later it then froze ( In - Photoshop). Could not force quit, so shut down, and have not been able to boot again since (white lit screen - flashing folder with question mark) . I have also taken the hard drive out and checked the connections which seem fine. Any suggestions? - Is the Hard Drive dead. : other info : It was also running parallels 8, with Windows 7. at the time of the update....

This article may help: A flashing question mark appears when you start your Mac.

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

TS1440 A flashing question mark appeared when I started my MacBook Pro, I've tried all the suggestions and nothing has worked. How can I back up my current files so I can reinstall Mavericks?

I recently did a manual reboot after my MacBook Pro had frozen, and instead of the usual Apple and loading icon, it gave me the flashing question mark on a folder, which I've never encountered before. I looked up some possible reasons on my PC, and after reading that there's a problem with my HD I tried looking up how to back up my files so that I can do a clean reinstall of Yosemite (latest ver.). However, I've never used anything like Time Machine or anything else that could back up all my files, so it didn't sound like I could do anything about that at this point. I've also tried going into Disk Utility and attempting to repair the disk image. There was only 2 available, disk0 and the base system. I verified the base system, and told me there was nothing wrong (it didn't give me the option to repair anything either, on both available options). I don't think this is the right thing though, since my drive was called MacBook Pro HD. So basically this is the point I'm at now. Is there anything I can do that will repair my HD without erasing all my files?

I've tried all the suggestions and nothing has worked.
I verified the base system, and told me there was nothing wrong
Hold the option key on boot to see if you can select your Macintosh HD.
A flashing question mark or globe appears when you start your Mac - Apple Support
You can boot into Recovery and re-install the OS X on top of what you have. It will preserve your user data.
command R on boot.
Recovery http://support.apple.com/kb/HT4718

Flashing question mark at start up (details in post)

Problem: Flashing question mark at startup.
System: iBook G4 running OS X version 10.3.something.
Details: The machine froze on waking up when I opened it last night. I held down the power key to turn it off, then powered it up again and got a flashing question mark superimposed on a small blue folder icon.
Further details:
(1) I tried to start the iBook up in Firewire target mode to copy my data to another machine. Holding down the T key at startup brings up the Firewire screensaver, but the iBook drive does not appear on the host machine's desktop.
(2) I can start the iBook from CD: I cannot find the CDs that came with the machine at the moment, but I can boot from a OS X 10.3 install CD that I have laying around.
(3) The hard drive is not visible to Disk Utility: When I boot from the OS X 10.3 install CD and then start Disk Utility, my hard drive is not visible to Disk Utility.
(4) Zapping PRAM does not help: I held down option-apple-P-R and restarted, letting the iBook chime four times for good measure. I still get the flashing question mark and the hard drive is still not visible to Disk Utility.
(5) The hard drive is visible in single-user mode: I powered down again and held down apple-S while powering up. I am now in single-user mode. My hard drive is visible and all of the files I have inspected seem to be just fine. I have not done anything except cd into various directories, use ls to list the files in the directories, and use cat and more to display the contents of various text files.
Questions: Obviously what I would like is to be up and running as quickly as possible. But more importantly, I don't want to do anything that would muck up the data on my hard drive.
(1) Is there any way to manually back up the data to a removable device while in single-user mode?
(2) I have not done anything with fsck yet. Should I? What are the risks/benefits of using fsck?
(3) Just for curiosity's sake: Why is the hard disk visible in single-user mode but not to Disk Utility?
(4) What are your suggestions for what to do next? I am still in single-user mode and am happy to stay there while I wait for advice.
Thanks,
RJH
iBook G4 Mac OS X (10.3) OS version 10.3.(something) -- don't remember and can't start up to find out

Here are some troubleshooting guides:
http://docs.info.apple.com/article.html?artnum=58042
http://docs.info.apple.com/article.html?artnum=106464
http://docs.info.apple.com/article.html?artnum=50959
http://docs.info.apple.com/article.html?artnum=106214
The following link is about backup:
http://homepage.mac.com/lee_cullens/Bx3.html
(1) Is there any way to manually back up the data to a removable device while in single-user mode?
Yes. If you have an external backup drive you can copy your files while in single-user mode. There are several available tools you can use: cp, rcp, rsync, and diskutil. These utilities may require knowing the Unix device names and paths. You can use the df command to obtain that information. Use the commandline "man cmd" to obtain the Unix help on the particular "cmd", e.g., man rcp.
(2) I have not done anything with fsck yet. Should I? What are the risks/benefits of using fsck?
Fsck is simply a form of Disk Utility that can repair a startup volume when in single-user mode. One of the above references explains how to use fsck to repair the disk. Note that if fsck returns anything other than "** The volume (nameofvolume) appears to be OK", you should re-run fsck until the preceding message is received. If you re-run fsck more than 5 or 6 times without getting the OK message, then fsck is not able to fully repair the drive.
If you have other disk repair tools like Disk Warrior or TechTool Pro, you should try to repair the drive with them. Both tools can perform repairs that neither Disk Utility nor fsck can.
Of course all the above is contingent on the drive actually being functional. If the drive has failed you may not have any success.

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT1379 A flashing question mark appears when I re/start my MacBook Air 2013. At first, I pressed Power & Option button and it recovered from Internet. Then, four options appeared but none of them are helpful. Could u please help me to solve it asap?

Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!

You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Flashing Question mark on start up?

So when I try to start up my PPC G5, I hear the start up tone, and then it goes straight to a grey screen with a flashing question mark. I followed all the steps on Apple's website to resolve this, I held option and started up, and all that came up were two buttons, one looked like a circle with an arrow at the end of it and the other was a straight arrow, also I couldn't move the mouse past a certain point on the screen, so the mouse was responding, it just couldn't move past maybe an inch on the left side of the screen. I tried restarting with the mouse and keyboard unplugged too, no dice. Then finally I decided to just re-install the leopard operating system. I put the disc in, go through all the steps, and when it asks me where i want to install Mac OS X, there's nothing to select. Where an icon for the hard drive should be it is just blank. I tried clicking the blank space to refresh it and nothing happened. Also, I read online that usually waiting fixes it, I left it on overnight and still nothing has popped up. Also, I've already tried resetting the PRAM, and nothing happened. If anybody can help me fix this it would be greatly appreciated. Either how to install Leopard again or how to start it up without the flashing question mark. Thanks!

"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Flashing question mark folder at start, broken CD drive, warranty Q's.

Hello! Thanks for reading.
Okay, so here's the background: I was just chilling around the house yesterday with my macbook, and it freezes, with no response from the touchpad or keyboard. I figure no problem, and just turn it off and on again. And then thats when I got the flashing question mark folder.
So I hopped on my family's PC to do some research, hoping to be able to fix it myself. Turns out the best way to fix it is to pop in the disk that came with the computer during start up... which I can't do because my disk drive is broken. I also tried other things, like pressing various keys (ctrl + option + p + r, or something like that)... and that didn't work.
The disk drive broke when I was at school, and as it was finals week, I had no time to get my computer to a genius bar. Then I moved quite a distance (see below), a process which has taken up most of my summer and made me quite busy to the point it has taken my macbook pretty much dying on me to get it to a genius bar. Gah.
So I guess I have a lot of questions now.
My computer is JUST a year old, by give or take a week or two.
I bought my computer from an authorized U.S. reseller in Japan while I was living there (I live in the US now, which I definitely wasn't expecting a year ago)... and no contact from apple came to buy apple care. Is it possible that because of the circumstance under which I bought my computer, that apple may still cover any repair or replacement fees under the warranty?
Also, I made an appointment at the local genius bar. Will that be free?
Also, does anybody have any other suggestions about how to get my computer up and running away from the **** that is the question mark folder?
Much thanks! I appreciate your time.

You made 2 big mistakes. 1) Apple may or may not contact you about AppleCare (sometimes I've gotten a postcard or email and other times I've not) but it is up to you to buy it before the 1 year mark. 2) whether it was convenient to get the computer repaired at the time or not, you should have contacted Apple to get the issue in the computer. If you didn't, Apple has no reason to believe it happened after the warranty ended.
You are going to foot the bill for the repairs

Why won't my MacBook Pro start up? White screen and flashing question mark.

Hi,
I've had my MacBook Pro for almost 2 years now and I installed OS X 10.8 about 4 months ago.
Today I turned the MacBook Pro on and a white screen with a flashing question mark appeared. I tried then getting the startup manager up: turning on the laptop and immediately holding in alt (option). But nothing appeared for about 25 seconds until a rotating Earth labelled 'Internet recovery' appeared that gave me options to join wireless connections. However, my internet wasn't in the options and when I tried typing in the information required to join my internet the laptop would just load and never find it.
I then tried putting in my Mac OS X install DVD (10.6.7) and help in C until the apple logo appeared on the screen and the little rotating loading circle appeared. That then disappeared and a cicle with a cross through it appeared (similar to a no entry sign). Then after about 30 seconds a blue screen followed by a grey screen appeared until eventually the disc ran properly. I then went into Disk Utility but there was no option called Macintosh HD, only the discs content. It wouldn't let me first aid, erase or repair anything.
I'm totally stumped and have 4 exams at university within the next 2 weeks. I'd really appreciate it if anyone could help me out here?
Thanks,
Best wishes,
Connor

The support article linked below is somewhat outdated. Where it refers to starting up from an installation disc, you should instead start up in Recovery by holding down the key combination command-R at the chime. Release the keys when you see a gray screen with a spinning dial.
If you don't have a current backup of all the data on the startup volume, and you want to preserve that data, then you must try to back up before you do anything else. Ask for instructions if you need them.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to reinstall OS X from Recovery, if necessary. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
A flashing question mark appears when you start your Mac

Flashing Question Mark Icon on Start up. DEAD iMAC. HELP

Well, i think i've hit a break wall...
It wont even recognize my internal HDD, it just has a flashing question mark (?) icon when i start the machine.....i've used Tech Tool Pro 4 and the Leopard start up disk, both with no luck, they don't even think a HDD is present at all.
I have pics of what i'm looking at:
http://img695.imageshack.us/img695/9631/26052010014.jpg
http://img9.imageshack.us/img9/3278/26052010021.jpg
http://img684.imageshack.us/img684/6130/26052010019.jpg
http://img217.imageshack.us/img217/3041/26052010018.jpg
http://img535.imageshack.us/img535/4143/26052010016.jpg
its one dead HDD..... any clues on what to do next?
Message was edited by: Matt-Beasley

You must use the original grey system DVD disc that came with your iMac to run the Apple Hardware Test, the one that is marked with instructions for running the test on it. Depending on the version of OS X that shipped with your iMac, this could be either disc 1 or disc 2.
When you restart with this disc in the optical drive & the D key held down, you should not see a question mark icon or the leopard installer. If you do, it means that either you don't have the correct disc inserted, you waited too long to depress the D key, or you are releasing it too soon.
You don't say exactly which Core 2 Duo iMac model you have. If it is a Mid 2007 or later model, use the chart at Apple Hardware Test: iMac (Mid 2007) and later models to identify the AHT version you need. That version number should printed on the grey disc you need to use. You can't use the instructions there to start the test from the hidden HD partition if the HD is dead or damaged but the ones for running the test from the Install DVD should work fine.

Bootcamp start flashing question mark

Similar Messages

Maybe you are looking for