Bootcamp update 3.1 and 3.2 will not install please help

I am running windows 7 32 bit on a silver mac book pro. it wants me to update my boot camp version from 3.0 to 3.1 but when i go to download it, it comes up with a progress box but then after a while it gives me an error basically stating that if this problem persists try just downloading it and installing it manually well i have done both ways even downloaded it form the apple website to which no avail. when i go to run the standalone updater it give me the error " the application was unable to start correctly (0xc0000005) click OK to close the application" i have tried running it as an administrator, and using the compatibility mode tried it with xpsp2,3 and vista sp2,3.. please help me as i am not the only one having this problem in my department

I donno if this is much help, but here goes.
This was my problem: When I upgrade boot camp from 3.1 to 3.2 using the apple update software (online, and on my windows 7 64bit) It didn't upgrade. I did the restart and everything went smoothly, but it just didn't upgrade.
Then I went on to apple boot camp software site to download the software to upgrade manually, then It says I need to locate bootcamp64.msi or something close to that.. I couldn't locate it on my hard-drive... so failure there
Turns out that file is on the MacBook Pro Mac OS X install DVD, under boot camp - apple
direct the location there and click on the bootcamp64 thing, and it should work (If you have the same problem as me)

Similar Messages

Software update in mountain lion offers updates for iPhoto and iMovie that will not install

Updated my iMac 2011 to Mountain Lion. Software Update now operates through the App Store. Third Party apps are OK but Apple's native Mac apps eg iPhoto, iMovie offer updates for installation that do not install.
Get this error eg for iMovie but similar for iPhoto and maybe others:
"We could not complete your update. iMovie is already installed on this computer. Choose Software Update from the Apple menu to check for available updates."
If you do as suggested, it reloads App Store software update and goes round again...
If I go to "Check for updates" in the iMovie menu it tells me it's the current version.
"This version of iMovie (9.0.8) is the current version."
The badge showing the count of apps requrining an update is also wrong.

Hi, just wondering, were any of Apple's Apps moved from there default location?

IPhoto and Disk Utility Will Not Launch - Please Help!!

Hello!
The last week I have not been able to launch iPhoto. When I tried to troubleshoot last night by going through solutions on the forums, I realized that I couldn't launch Disk Utility either. I have since run the Disk Utility from the Mac OS Panther Install Disk, gone through several troubleshooting procedures (font cleanups, cache cleanups, hard-disk space cleanups, etc.) but with no success.
The last troubleshooting doc I went through recommended checking Console for a log of problems, and sure enough, the only comments in the Console Log were related to iPhoto and Disk Utility. Can someone please advise regarding the below comments and how to fix??
Thank you SO much!
-Sarah
Mac OS X Version 10.3.9 (Build 7W98)
2006-08-13 10:31:53 -0600
dyld: /Applications/iPhoto.app/Contents/MacOS/iPhoto truncated or malformed library: /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI (file is empty)
dyld: /Applications/iPhoto.app/Contents/MacOS/iPhoto truncated or malformed library: /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI (file is empty)
dyld: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility truncated or malformed library: /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI (file is empty)

Hi - I appreciate the assistance, but archiving and reinstalling does not help me determine why this happened, how to prevent it from happening again, and is a fairly elaborate process for something that might have a quick fix (what I was hoping for). I was trying to leave that as a last resort.
Also, I have no idea what Onyx is - would you elaborate?
Thank you!

Flash player will not install please help.

I am running IE and windows 8. flash works fine for chrome and any other web browser I use. The program I use for work speficially uses IE for maps and they will not load. I have unistalled and tried reinstalling, i tried to use it before when it was already installed on my computer, ive changed all the settings in internet options to what the help page says. When i try to reinstall at the get.adobe all i get is a the page with the adobe logo, but where it should have the doanload button and all the information it is just white... please help i need to get this solved before monday.

Flash Player for IE in WIndows 8 is modified and embedded in the browser by Microsoft. You cannot update it or reinstall it from here... ONLY through Windows Update. There's a Microsoft KB update installed that prevents any modification outside of Windows Update for the ActiveX plugin in WIndows 8 or 8.1.
Firefox, Opera and Safari use a standard Flash Player plugin. Chrome (like IE) has its own porprietary build (called "PepperFlash"), which is modified and embedded in the browser by Google. It functions independently of the Standard or ActiveX plugins.
The problem you're seeing ISN'T a Flash Player problem. It's a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released it. The pages (or in this case the app) can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
Adobe can't fix this because Internet Explorer 11 isn't their product and the problem is in the browser itself, not the plugin.

Libflashplayer.so will not install - Please Help!

Hello,
I am using a linux netbook, however I cannot install a higher version of flash player.
I am currently using version 10.0 but want to upgrade.
I have downloaded the flash 10.2.159 from the adobe site. I downloaded the file as a tar.gz and then I extracted the file to home/user.
After doing this, I copied the libflashplayer.so file to /usr/lib/mozilla/plugins, however when I restart my netbook, flash player does not install and removes version 10.0. The 10.2.159 version has not installed on my netbook and instead, removes flash from Firefox.
Any ideas what I am doing wrong? Some help would be greatly appreciated.
Thank you.

Wish I had the Answer.
I have the EXACT SAME ISSUE!!!
Driving me CRazy,
I have tried everything that I can possibly read or decipher online,
still No Luck

Adobe Photoshop CS3 Will Not Install PLEASE HELP TRIED EVERYTHING

I downloaded from Adobe the Photoshop CS3 Extended Trial directly from Adobe. (BTW I am on Vista 32)
The first time I tried installing, ADBEPHSPCS3_WWE.exe successfully unpacked, I successfully transitioned to the Adobe Photoshop CS3 installation, and it appeared to install. After 30 minutes or so, the installer finished and simply said that shared components had installed but the Photoshop CS3 Component install failed.
I always got in the log Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.MFCLOC,version="8.0.50727.163",type="win32",publicKeyToken="1fc8b3b9a1e18 e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information
This, I know, is everyones typical problem.
I turned off firewall and antivirus.
I uninstalled ALL Adobe and Macromedia programs, including Flash and Acrobat.
I used Windows Install Cleanup Utility to remove them.
I downloaded the CS3 Clear from Adobe and cleared at levels 1, 2, and 3.
I created the Administrator account on my computer and tried everything on the Administrator account.
I tried installing Photoshop CS3 with compatibility mode for XP SP2.
I tried:
1. Open an Administrator command prompt by right clicking on Start -> All
Programs -> Accessories -> Command Prompt and selecting "Run as
Administrator" and clicking "Allow" for the elevation prompt
2. In the command prompt, type the command below
fsutil resource setautoreset true C:\
3. Reboot the machine
I tried:
Get command prompt up. It has to be run with admin rights so save yourself some time and run it this way.........Start/programs/accessories/.....right click command prompt and click run as administrator.
Then paste these commands in 1 after the other
regsvr32 vbscript.dll (THEN PRESS ENTER)
and
regsvr32 jscript.dll (AGAIN PRESS ENTER)
I even tried installing in Safe Mode but the CS3 setup would not initialize.
I do not know what else to do. I have CS2 which I will use, but I was really hoping to move to CS3 which is supposed to be better and faster. Does anyone know anything else to do? I am not a computer noob but I am not about to reinstall Vista. If anyone has any suggestions they would be greatly appreciated.

I was in the same predicament and after spend many hours over several days trying a multitude of things I finally found an easy fix (below):
========================================
Assuming you have Internet Explorer 7 go to:
Tools/Internet option/Advanced
Click the Reset dialog box. This will bring IE7 back to its default settings. You should reboot your computer. After logging back into Windows load IE and let it take you though its initial setup. When you are done close IE and install Photoshop.. This worked for me,,, hopefully it will work for you!

Exchange 2013 CU5 will not install, please help

Hi everyone
Please help, I am trying to upgrade Exchange 2013 SP1 to CU5 but it just stops at the following point, please help:

Hi,
Have you disabled any third-party firewall or AV programs for a test?
Thanks,
Simon Wu
TechNet Community Support

Leopard will not install PLEASE HELP

I just got leopard for my macbook gen 2. It has a 512X2 processor. When I instert the disk it acts like it is going to boot up 3 times. then it spits the disk back out. I have tried to boot the disk while restarting, but it doesn't work either. Does anybody have any suggestions?

bump

I just updated my phone and my apps will not open

i just updated my phone and my apps will not open

I cannot send shortcuts for apps to the home screen since updating with iOS7. Any suggestions?

HT201210 I tried to update my software and my phone will not come back on. I have a pic of itunes and a usb cable on my phone and it wont do anything?? i need help

I tired to update my software and my Iphone 4s has frozen please help???

Iam having the same problem this this my 4th iphone and have an ipad and Macbook pro iam thinking to change to samsung all i get is problems from my iphone now days

Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

maybe something is wrong with your install or your computers hardware as in a periodic defect
or the cd is dodgy
installed
vs express 2013 for desktop
vs express 2013 for windows (metro)
vs express for windows phone
on my windows 8.1 think I installed them when I was still using win8 though
without problems
when the same bootcamp partition was windows 7 ultimate 64bit
I was running
vs 2010 pro
and vs 2008 (for winCE)
without problems

I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

Hi
Can you use the mouse to access and start System Preferences?
When you rest the mouse over a dock icon, does its name pop up?
What happens if you open an application by ctrl-clicking on the icon then selecting Open?
Bob

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

Please read, and reply here with more information https://forums.adobe.com/thread/1499014

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
Final Cut Studio 2 (Including Final Cut Pro 6)
• A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
• 1GB of RAM
• An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
• A display with 1024-by-768 resolution or higher
• Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
• QuickTime 7.1.6 or later
Additional Recommendations
• 2GB of RAM when working with compressed HD and uncompressed SD sources
• 4GB of RAM when working with uncompressed HD sources
• A display with 1280 x 1024 resolution or higher
Additional Requirements for Motion
• A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
• A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
• For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
Additional Requirements for Color
• The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
• ATI Mobility Radeon X1600
• ATI Radeon X1600
• NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
• For 32-bit rendering: a graphics card with at least 256MB of VRAM.
• A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
• A three-button mouse for full functionality
Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

Bootcamp update 3.1 and 3.2 will not install please help

Similar Messages

Maybe you are looking for