Bootcamp Vista on low/mid-end MacBook ?
Hi,
I plan to buy a MacBook this week-end and I would need just little bit of information about it. My mom (yeah) would like to run Vista on my macbook, so she can start working on it (she teaches windows/office) this summer before she buys a new computer and me, I wanted to buy the cheapest one (2.0ghz) and I waited for the GMA chip to be upgraded before I bought.
So my question is, can a low-end MacBook smoothly run Windows Vista and the newest Office via Bootcamp or should I pay a bit more for the 2.2ghz or buy 2gb of ram instead of 1 or both (2.2ghz + 2gb of ram) ? In addition, if I buy it with 1gb of ram, can I upgrade it later by buying 1gb of ram directly from apple or another retail store ? Can I install it myself or do I have to ship it to apple ? Sorry, I have limited experiences with macs and laptops
Thanks in advance
JT
william.garrison wrote:
I wouldn't buy memory from Apple, but that's because I can install it myself, and can troubleshoot computer problems (if the memory or machine were defective). That doesn't mean, however, that I should go around telling everyone that they should do it themselves.
Apple tells people this not me. That is why they give very good instruction for DIY and it doesn't void the warranty.
You can buy Ram guaranteed to work on a macbook cheaper than 700 dollars. The DIY instructions are pretty easy. Even if a person wasn't comfortable with DIY they could buy the RAM and have it installed by a technician for a lot less that 700 dollars. 4 GB RAM for 159 dollars, guaranteed to work in a Mac and then say a 100 dollars for a tech is 259 dollars. 400 dollar savings and done by a professional.
Telling people it is to hard for them to do is a pretty good scare tactic itself. A lot of people on this forum with no experience have used the *instructions provided by Apple* to install their RAM. I will continue to advise people to buy RAM elsewhere and use the instructions Apple supplies to install it themselves.
A lot of people come on here and see a statement like yours, saying unless you know a lot about computers and troubleshooting you better not try it, immediately panic think I have to be computer geek to replace my RAM so I better shell out the 700 dollars to get real Apple RAM.
Most people know their limitations and don't have to be told what they can or can't do.
The RAM I bought was "Certified to work on my Mac" and it didn't come from apple. It is the same kind they use just sold as a consumer product instead of OEM labeled.
Message was edited by: First Magus
Similar Messages
-
Bootcamp Vista and Low Frame Rates
Hey Guys,
I've got a MBP Santa Rosa, and I've loaded Vista (both 32bit and x64) at varying stages onto bootcamp, and I seem to get very low frame rates. In TF2 I'm only topping out around 50 to 60 (vsync isn't on)
I've tried the official bootcamp drivers and also some from Laptopvideo2go. I'm at a bit of a loss here.
Can anyone recommend a decent driver set or at least provide some numbers on what they're getting in TF2 or the Source engine stress test?
Screen settings are at 1280x1024 with all settings at default recommendation.
Tried 3dmark06 but it runs at about 15FPS in the first test and I bail out cause I can't bare to watch it like that.Fair point Sorry
-
How to get bootcamp to install from USB on Mid 2010 Macbook Pro in Mavericks
Ok, finally ran into my first problem with Mavericks. It's a doozy. Please if anyone has any advice, let me know.
My bootcamp partition was acting a little buggy. I also wanted to make the partition larger, so I went ahead and erased it, made a larger partition and was getting ready to install windows 7.
Unfortunately, little to my knowledge, bootcamp assistant is programmed to not allow installation of Windows via USB if your computer had an optical drive in it's factory delivered form.
I have removed my optical drive in favor of a second hard drive and encased my original superdrive into an External USB hub.
There apparently used to be a solution involving editing the plist.info text document to allow USB installation. However, as of MAVERICKS, this document is now locked and unable to be edited.
I was running windows 7 fine until I scrapped it, and now I have no way to re-install windows short of going through a laborious process of re-installing my optical drive into my laptop, installing, and then re-installing my hard drive back in. The only reason is due to a software bias for my series of laptop because it "used to have" an optical drive.
Does anyone know of any way that I can bypass this issue to get Windows Re-installed to a bootcamp partition on a mid-2010 macbook pro without using the optical drive?
Thanks in advance!Remove the Boot Camp partition only with Boot Camp Assistant, not with Disk Utility.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped
Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers -
Mid 2010 MacBook Pro i7 - Crashing - Low $ - HEELLPP
My mid 2010 Macbook pro 15" with i7 running 10.85 has recently started crashing. I've really only used it extensively for the last 2 years so it's been doing quite well but has now started black screening then rebooting with no - at least not apparent to the user - sequence of events.
My partner isn't working (car hit and run) so budget is low and I'm currently pushing myself on Team Treehouse to learn coding to improve my job prospects and my salary so need the laptop right now.
Is the below the standard logic board replacement that I've found many have on forum? is it the video card? Just not sure which way to head and not in the budget for a totally new laptop though would be confident enough with the help of (PC) husband to upgrade hard drive or other components. OR am I best to take it to the Apple store for a genius assessment?
Any help greatly appreciated.
Kindest,
Kitty
Etre Check report below:
Problem description:
Mid 2010 MBP with i7 processor and anti-glare screen running 10.85.
Mac occasionally crashes, goes black screen, then reboots with seemingly no identifiable actions causing this to happen by the user (ie. can’t identify similarities).
EtreCheck version: 2.0.11 (98)
Report generated 4 November 2014 9:22:11 AM AEDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
Color LCD 1680 x 1050
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:14:28
Disk Information: ℹ️
ST9500420ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (335.34 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.4 - SDK 10.8) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ReceiverHelper.plist Support
[running] com.citrix.ServiceRecords.plist Support
[invalid?] com.maintain.LogOut.plist Support
[invalid?] com.maintain.PurgeInactiveMemory.plist Support
[invalid?] com.maintain.Restart.plist Support
[invalid?] com.maintain.ShutDown.plist Support
[invalid?] com.maintain.Sleep.plist Support
[running] com.maintain.SystemEvents.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.wacomtablet.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[invalid?] com.maintain.AutoLoginUserScreenLocked.plist Support
[not loaded] com.maintain.CocktailScheduler.plist Support
[invalid?] com.maintain.HideSpotlightMenuBarIcon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items: ℹ️
Adobe Bridge CC ApplicationHidden (/Applications/Adobe Bridge CC/Adobe Bridge CC.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 4.0.1.13525 Support
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 4.0.60531.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 Support
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
googletalkbrowserplugin: Version: 4.0.1.13525 Support
QuickTime Plugin: Version: 7.7.1
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: Java 7 Update 45 Check version
Safari Extensions: ℹ️
feedly
Twitter for Safari
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
WacomTablet Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
GLAM WD750 [Local]
Total size: 749.78 GB
Total number of backups: 16
Oldest backup: 2012-12-23 08:10:51 +0000
Last backup: 2014-10-28 10:33:13 +0000
Size of backup disk: Excellent
Backup size 749.78 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% AppleIDAuthAgent
0% fontd
0% Creative Cloud
0% mds
Top Processes by Memory: ℹ️
245 MB WebProcess
86 MB Safari
64 MB Finder
57 MB mds
56 MB PluginProcess
Virtual Memory Information: ℹ️
1.88 GB Free RAM
1.23 GB Active RAM
215 MB Inactive RAM
832 MB Wired RAM
433 MB Page-ins
0 B Page-outsHi Ogelthorpe,
Thank you for such a speedy response, suspected as much. Here is the report below, does this mean a trip to the Apple Genius Bar is in order?
Hoping they can take pity on me…..
panic(cpu 2 caller 0xffffff7f8bc85f1a): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff808627d000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 2), Frame : Return Address
0xffffff8085383190 : 0xffffff8009a1d636
0xffffff8085383200 : 0xffffff7f8bc85f1a
0xffffff80853832d0 : 0xffffff7f8a1bd88c
0xffffff8085383390 : 0xffffff7f8a29085a
0xffffff80853833d0 : 0xffffff7f8a2908b8
0xffffff8085383440 : 0xffffff7f8a556280
0xffffff8085383570 : 0xffffff7f8a2b9345
0xffffff8085383590 : 0xffffff7f8a1c465f
0xffffff8085383640 : 0xffffff7f8a1c20f6
0xffffff8085383840 : 0xffffff7f8a1c303e
0xffffff8085383920 : 0xffffff7f8b19cfc0
0xffffff8085383960 : 0xffffff7f8b1acdf7
0xffffff8085383980 : 0xffffff7f8b1dbe1f
0xffffff80853839c0 : 0xffffff7f8b1dbe7d
0xffffff8085383a00 : 0xffffff7f8b1b2bcf
0xffffff8085383a50 : 0xffffff7f8b17d022
0xffffff8085383ae0 : 0xffffff7f8b178dba
0xffffff8085383b10 : 0xffffff7f8b17697b
0xffffff8085383b40 : 0xffffff8009e6ec83
0xffffff8085383bc0 : 0xffffff8009e70d13
0xffffff8085383c20 : 0xffffff8009e6e74f
0xffffff8085383d70 : 0xffffff8009a98c21
0xffffff8085383e80 : 0xffffff8009a20b4d
0xffffff8085383eb0 : 0xffffff8009a10448
0xffffff8085383f00 : 0xffffff8009a1961b
0xffffff8085383f70 : 0xffffff8009aa6546
0xffffff8085383fb0 : 0xffffff8009acf473
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f8bc78000->0xffffff7f8bc8afff
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[B5B1F368-132E-3509-9ED5-93270E3ABB DD]@0xffffff7f8bc73000
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f8a0c2000
dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f8bc5f000
dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f8a040000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f8a148000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f8a105000
com.apple.NVDAResman(8.1.6)[39D35403-42FB-3F08-999C-9866938D6B3A]@0xffffff7f8a1 5c000->0xffffff7f8a3fffff
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f8a0c2000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f8a148000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f8a105000
com.apple.nvidia.nv50hal(8.1.6)[BF3CC142-4112-3E23-BCE2-CDCFD5811DDA]@0xffffff7 f8a40b000->0xffffff7f8a6defff
dependency: com.apple.NVDAResman(8.1.6)[39D35403-42FB-3F08-999C-9866938D6B3A]@0xffffff7f8a1 5c000
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f8a0c2000
com.apple.GeForce(8.1.6)[8D728212-9DE5-349D-ABF3-7989F0C4BC29]@0xffffff7f8b15a0 00->0xffffff7f8b227fff
dependency: com.apple.NVDAResman(8.1.6)[39D35403-42FB-3F08-999C-9866938D6B3A]@0xffffff7f8a1 5c000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f8a148000
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f8a0c2000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f8a105000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide: 0x0000000009800000
Kernel text base: 0xffffff8009a00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 26462820966363
last loaded kext at 26236101947216: com.apple.driver.IOBluetoothHIDDriver 4.1.7f2 (addr 0xffffff7f8bd97000, size 73728)
last unloaded kext at 24681820713714: com.apple.driver.IOBluetoothHIDDriver 4.1.7f2 (addr 0xffffff7f8bd97000, size 73728)
loaded kexts:
com.Cycling74.driver.Soundflower 1.5.1
com.apple.driver.AppleIntelProfile 119
com.apple.iokit.IOBluetoothSerialManager 4.1.7f2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.13.14
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleMikeyDriver 2.4.7fc4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.GeForce 8.1.6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleIntelHDGraphics 8.1.6
com.apple.driver.AppleIntelHDGraphicsFB 8.1.6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMuxControl 3.4.5
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.3.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.iokit.AppleBCM5701Ethernet 3.6.2b4
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.driver.IOBluetoothHIDDriver 4.1.7f2
com.apple.driver.AppleProfileTimestampAction 119
com.apple.driver.AppleProfileThreadInfoAction 119
com.apple.driver.AppleProfileRegisterStateAction 119
com.apple.driver.AppleProfileReadCounterAction 119
com.apple.driver.AppleProfileKEventAction 119
com.apple.driver.AppleProfileCallstackAction 119
com.apple.iokit.AppleProfileFamily 119
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f2
com.apple.nvidia.nv50hal 8.1.6
com.apple.NVDAResman 8.1.6
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleSMC 3.1.5d4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.6
com.apple.iokit.IOUSBMassStorageClass 3.5.2
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.5
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IO80211Family 530.5
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
System Profile:
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 3 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3 -
13" Macbook Pro runs burning hot in bootcamp vista?
I just got a new macbook 13". I was using my bootcamp vista and the macbook literally burned my lap. I flipped it over and the metal area, directly in the center of the macbook, was BURNING hot. Probably hot enough to cook an egg -- I know I couldn't leave my hand there for a long time. Is this normal? I'm afraid this laptop will burn my legs or cause other heat related issues...
Make sure you have Vista and the BootCamp drivers up to date, but Apple doesn't recommend using a portable computer in your lap:
From the MacBook Care page:
+For prolonged use, place your MacBook on a flat, stable surface. Do not place your MacBook on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn. The bottom of the MacBook case functions as a cooling surface that transfers heat from inside the computer to the cooler air outside. The bottom of the case is raised slightly to allow airflow, which keeps the unit within normal operating temperatures. In addition, warm air is vented from the slots in the back of the case.+ -
Low battery life mid 2013 macbook air (i7)
hi all, i am getting pretty poor battery life out of my new macbook air. can you pro's check out my running info and figure out what is sucking my battery?
Hardware Information:
MacBook Air (13-inch, Mid 2013)
MacBook Air - model: MacBookAir6,2
1 1.7 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 5000 - VRAM: 1024 MB
System Software:
OS X 10.8.4 (12E3067) - Uptime: 0 days 0:15:51
Disk Information:
APPLE SSD SM0128F disk0 : (121.33 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 120.47 GB (79.38 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Kingston DataTraveler 2.0 31.22 GB
UNTITLED (disk1s1) /Volumes/UNTITLED: 31.22 GB (31.15 GB free)
Microsoft Microsoft® Nano Transceiver v1.0
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.spotify.webhelper.plist
User Login Items:
iTunesHelper
Dropbox
Spotify
uTorrent
3rd Party Preference Panes:
None
Internet Plug-ins:
JavaAppletPlugin.plugin
MeetingJoinPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin.plugin
Bad Fonts:
None
Top Processes by CPU:
10% Google Chrome
3% WindowServer
2% Spotify
2% Microsoft Outlook
2% Dock
1% EtreCheck
1% fontd
0% unetbootin
0% Microsoft Lync
0% Microsoft Word
Top Processes by Memory:
131 MB Messages
115 MB Spotify
106 MB Google Chrome
106 MB Microsoft Outlook
106 MB WindowServer
90 MB iTunes
90 MB Dropbox
86 MB Google Chrome Helper
74 MB iPhoto
74 MB Microsoft Lync
Virtual Memory Statistics
1.23 GB Free RAM
1.70 GB Active RAM
456 MB Inactive RAM
502 MB Wired RAM
558 MB Page-ins
0 B Page-outsthis is my case... just let charging almost all day.
it's too big drop from 12 to 8 hours... Im not even using such processor...
it feels like a lie... -
The command key popped off my mid 2011 macbook air. It is meant to have two metal bars but can't find the 2nd one. I have clicked it back into place but if I press the button at the bottom the top pops up and I'm worried that if I don't fix the problem I may end up losing the key altogether!
Can you buy replacement metal bars? should I just remove the other bar completely?
Thanks in advance.Sorry, must have been the crackpipe I smoked last night! LOL
You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
ADDENDUM STEP:
This step should be placed between 9-10.
Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
Apologies for missing this.
Best,
WBN -
Can't install a stable Windows 7 on my Snow Leopard mid-2009 Macbook Pro via Botcamp
I just erased the whole disk with Disk Utility and re-installed a fresh version of Snow Leopard on my mid-2009 MacBook Pro with my original install disk and updated all the software.
I then created a 400GB partition via Bootcamp Assistant for Windows and successfully installed Vista.
I then successfully installed Windows 7 (not an upgrade) over Vista (I only have the official upgrade disk) and installed Bootcamp in Windows with the original OS X DVD.
I then upgraded Bootcamp from version 3.0 to 3.1 to 3.2 to 3.3 and then to 4.0.
None of these versions have resulted in a stable version of Windows 7 because the screen randomly turns one color (usually blue or white) with no cursor or interaction possible and I have to shut the computer down by holding the power button.
I've tried the whole process with 32 bit and 64 bit versions with the same results. The funny thing (not so funny, really) is that WIndows becomes increasingly unstable the higher I go with Bootcamp. I've even tried running the Vista to Windows 7 upgrade utility but Windows 7 is totally unusable. Once at Bootcamp 4 the system can't even get past the windows boot process.
I'm pulling my hair out here because I can't think of anything else to try. I'm suspecting the problem is driver related.
Any help would be greatly appreciated.I suggest you start over with the install of Windows. You can use an Upgrade version of Win 7 to do a Clean install.
Basically you have to Not put in the license key when asked and also uncheck the option to Auto Activate Windows when the system gets online, mThen once it is installed and you are at the desktop go to the System applet in Control panel and Select Activate Windows. Then put the license key in.
If for some reason that doesn't work then you do a second install of Windows7 over the top of the current install and that make the installer think you are Upgrading and the Activation will go through.
It is all covered over at the Windows 7 forum.
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html
http://www.sevenforums.com/tutorials/31402-clean-install-upgrade-windows-7-versi on.html -
Windows 8.1 64-bit driver for Coprocessor on Mid 2009 Macbook Pro 5,4
I have successfully installed Windows 8.1 Pro 64-bit onto my Mid 2009 Macbook Pro 5,4. The installer from BootCamp 5.0.533.5033 would not run, but I installed one-by-one the files under Apple and then ran the 64-bit nVidia installlers. I have everything present and accounted for except for the 'Coprocessor.'
I have looked through the forums and everything seems to indicated that if you install the nVidia drivers it will install the driver for this but it doesn't. Any thoughts/suggestions/solutions?For anyone who will find this post in the future, the Device Manager indicates that the 'Device Instance Path' is
pci co-processor pci\ven_10de&dev_0aa3&subsys_cb7910de&rev_b1\3&21436425&0&1d
Searching for that online, it appears that this is the nVidia MCP79 Co processor System.
This driver did not install with version 306.37 that came with the BootCamp drivers. I downloaded the current version from nVidia of 334.89 and that didn't work either. I searched online and found a driver for an Alienware 17x that uses the same co processor and ran the installer which extracted the files for the nVidia chipset v. 15.57 for 64-bit Windows 7 and Vista to c:\dell\drivers\R273039 and pointed the Device Manager to this folder and it was able to successfully install the driver software for the Management Controller (drivers are listed under the SMU folder for the "PCI\VEN_10DE&DEV_0AA3" device).
NVIDIA nForce System Management Controller
I then proceeded to use Double Driver to backup the drivers in use by the system so that if I install Windows 8 on future systems I can use this rather than the round-about way of getting the driver installed on the system. -
Mid 2011 Macbook Air Painfully slow.
Mid 2011 Macbook Air Painfully slow.
Hey everyone. I am writing about my 13 inch Mid 2011 Macbook Air.
Recently it has been extremely slow and on occasion has not started up.
I have reset the PRAM and SMC already, yet it is still very slow. I have a couple theories about what might have caused it, are they plausible?
Theory 1: It’s a software problem. I tried to upgrade to 10.8.2 but halfway through the upgrade the computer restarted and somehow I was still on 10.8.1. For fear of a big issue happening I didn’t try to upgrade again. Perhaps it is a flaw in Apple’s software update?
The important thing to note about this update is that I tried to install 10.8.2 around a month or two weeks BEFORE I started having problems. So if these issues were due to 10.8.2’s failed update then it certainly was a delayed reaction.
I would of course like to update to 10.8.2 BUT as my computer is acting EXTREMELY slow and having trouble turning on occasionally I am worried the software update will completely brick the machine. Is that possible? Should I actually finish through with the software update?
Theory 2: It was an electricity problem.
The computer died when I was sitting at a café plugged into their wall sockets. A few days later when I came back to the same spot with my old macbook which is now being used in lieu of the Air it suddenly turned black for a little while. Sensing it might be an electricity surge or something with their system I unplugged the cable. I am not sure if that was paranoia though.
Can an electricity surge or a bad outlet fry a computer? Can it fry the ram so the computer is extremely slow? Does that theory hold any water?
Thanks for your help diagnosing this problem.
All the best.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
How to install Windows 8 on Mid 09 Macbook Pro (10.8.3)
So i loved the new Windows 8, and even had it installed before bootcamp supported windows 8 on my new iMac, i waited to buy a bigger hard drive and more ram for my mid 09 Macbook Pro. The day i bought the new hardware, Apple released 10.8.3, and an updated bootcamp to support Windows 8! Yay! I got my install disc out (iso file burned to DVD), opened up bootcamp assistant, only to get an error saying apple dropped support for my mid 09 Macbook Pro and Windows 8. Making the install impossible through bootcamp. Do not fret, i have the solution, and EVERYTHING works perfectly. Here we go.
Gather your Windows 8 install disc AND a Windows 7 install disc (you can surely find one by searching the net, use your old one, or borrow a colleagues... we are licensing Windows 8, NOT 7, this is just for my trick to fool bootcamp assistant and no i do not condone piracy)
Inside BootCamp Assistant, the driver download may hang,it did for me, twice..could be heavy usage due to the popular new update...so i recommend downloading it faster, and manually here http://support.apple.com/downloads/#macoscomponents and get 4.1.4586 yes this is for windows 7, ALSO while you are there, download the windows 8 support pack 5.0.5033, as we will need that later as well. As a matter of fact, DO IT THIS WAY and dont bother
That being said and done, in BootCamp Assistant (OSX), only check off Install Windows 7, leaving the download support software unchecked
Partition your hard drive as youd like, this splits up your storage space however you like, keep in mind which OS you plan to run the most, and obviously give that one more room, i.e you do all your Photoshop work, and app development in OSX, and only use Windows for office stuff, you'd want to give yourself more room on the OSX side. I however bought a huge new internal drive to split them basically in half, as i use them both frequently.
This step is where the trick comes. OSX 10.8.3 / BootCamp will advise you there is no support for Windows 8..only 7 with your Mid 09 Macbook Pro if you have put your Windows 8 disc in, upsetting you as it did me...possibly bringing you to this post, thats not FAIR is it? Your 09 MacBook Pro is still JUST AS GOOD as a lot of PC's running Windows 8, why they excluded this model i have no idea...im sure they had reasons, but i dont care at the moment..lol
INSTEAD place a Windows 7 install disc in, and click next. BootCamp Assistant will now partition your drive, make the windows side bootable and restart your MBP.
Let it do its thing, and eventually you will land at the Windows 7 installation interface. We don't really want that, we want Windows 8 right?
Click the "x" to close the installation for Windows 7, it threatens your MBP will restart, and allow it to do so.
**IMPORTANT** Once you hear the beloved Mac chime, quickly press and hold the "option" key.
This brings you to an area where you can select a startup disk. At this point, lets get rid of the trick. Hit your eject button and get rid of the Windows 7 install disc, we are done with it now.
You now, well in my case anyway, should only see your Mac HD, and the Recovery Disk.
Insert your Windows 8 install disc
Now WAIT. Eventually, you should see a new DVD looking icon that says Windows pop up next to the MacHD and Recovery Disk. (depending on what you called your iso, it may something else...not sure, but you cant miss the new entry)
This is where a wired mouse will be needed, or use tab/space/enter to navigate to the new Windows Disc icon and launch it.
You are now in Windows 8's installation interface, cool!
Follow the steps until it asks you where you want to install it. You should see a partition about equal to what you set earlier in BootCamp Assistant, and it SHOULD say Bootcamp right on it. Select this partition. (mine was the last one, the fourth i believe)
OH NO, it says you cant install it to that partition, this is normal. You need to highlight/select this partition, and click format. I cant remember, but i think you have to click "options" to get to a the spot where you can format it. Pretty straight forward. Safety check, obviously make sure you have the Bootcamp partition selected, dont format your Mac OSX partition!
After the quick format is done, Windows 8 installer will then allow you to click "next" and from there the magic happens.
Go through the whole Windows 8 install, and setup how you would like, this takes awhile, and im not covering that, as its a hand in hand walkthrough like any other install.
Once your inside your new Windows 8, you'll see a bunch of things not working, like tap to click on your trackpad, no on screen displays for brigtness, volume, and possibly other stuff. Not cool right?
Grab your USB stick, or Burnt disc that you applied the bootcamp support downloads to in the begining of this tutorial.
FIRST open the Windows 7 Bootcamp install, 4.1.4586, open the folder and find setup.exe and run it (we are in windows 8 now)
It takes a while, but Apple's BootCamp will install a bunch of drivers, etc, and eventually restart your MBP, which is cool, let it do it.
Upon finishing, lets go back to the USB/Burnt Disc where all your support software was saved, and lets get the newly support BootCamp 5.0.5033 opened up.
Big Thanks to a post by ErikVanD i seen on this forum for the next step.
If you want, try and click setup in this latest BootCamp support set, and you will get another sad error claiming x64 is not supported, something awful to that nature. Awww man, this far, only to get let down. Nope. We are going to fix that. And this is where ErikVanD's post pointed me to what we do next.
It was said to navigate in the BootCamp 5.0.5033 folder to something of the effect of BootCamp/Drivers/Apple and run the MSI file "BootCamp" (MSI file will say Windows Installer in its description, and not necessarily MSI for anyone not too savy with Windows) **note - NOT .bootcamp (notice the period in the front) and it should work and install the new Windows 8 support for your MBP...but in my case it didn't, which is why im posting how i fixed this. Your setup may somehow be different, but mine gave me an error say it "needs elevated permissions to run, use setup.exe instead. We tried that remember! And it gave us the x64 not supported error. Oh man! Blabbing aside, this file needs to be ran as an administrator, which yeah your the only user, but Windows is funny like that. Normally youd just right click, and select run as administrator, but out the box, that option isnt there when you right click, only install, repair, open with etc. Here's the next trick, you need to add a registry file to enable running as an administrator, dont be afraid, this is an old trick, and really easy.
Open notepad in Windows, and create a new doc, call it Add_MSI_run_as_administrator.reg
Paste this following code into the new doc
Windows Registry Editor Version 5.00
HKEY_CLASSES_ROOT\Msi.Package\Shell\runas] "HasLUAShield"="" [HKEY_CLASSES_ROOT\Msi.Package\shell\runas\Command] @=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\ 00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\ 73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\ 00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Or download the file already made from my company server at http://www.theprojectdev.com/public/pub.html **i put this there as a courtesy to help others like me, its just a complete reg file, so either create your own through copy and pasting above or download it. Either way, put it on your desktop.
Now double click the new registry file, and allow/ok it to do its thing.
Once done, you can discard the file from your desktop, or keep, your choice.
Guess What!? Now we can do the impossible! Lets revisit that solution from before by going to the newest BootCamp 5.0.5033, and navigate to BootCamp/drivers/Apple and select that tricky BootCamp MSI file that wouldnt allow us to run, this time RIGHT CLICK it. Because of our new registry entry we placed, we now have an option to "Run as Administrator" Click that option.
WooHoo! We have done what coudnt be done, BootCamp will now walk you through the installer, and add all the great support for Windows 8 on your mid 09 Macbook Pro that they for some reason neglected!
After the update, you will endure yet another restart. From there, most likely using a wired mouse still, navigate to the system tray icon on the bottom right corner of the screen (little up arrow) and click it. It will pop up a little menu, showing system processes/stuff running, click the gray squared diamond (this is bootcamp) and it will bring up the newest BootCamp control panel. From here, you can nav to trackpad/touchpad and set tap to click (finally) and gestures, etc. This control panel has lots of good stuff to make a MBP user feel comfortable in Windows 8. There you go! You did it!
I really, sincerely hope this helps someone, as it really made my day to get this resolved. I want to add that all On Screen Displays will work (your volume/brightness etc) they keyboard backlighting, and so much more, it really works great. I upgraded my hard drive to 1tb, and installed 8gb of PNY RAM from best buy ($40) and it runs Windows 8, AND OSX fantastically.
My company http://www.theprojectdev.com designs and develops mobile apps (iOS and Android) and web design and development, so im a heavy user of both OS's, and this setup is just the best thing that has happened to me in a portable sense. Runs so so so fast! Enjoy everyone!**********************IMPORTANT EDIT TO THE TUTORIAL***********************************************************
Everyone im sorry, i made a mistake informing you which BootCamp support drivers to download from Apple. You see I originally downloaded my Windows 7 Support from the BootCamp Assistant, and had the version number completely wrong.
The first BootCamp install packahe you should down load from http://support.apple.com/downloads/#macoscomponents is actually 4.0.4033
That will be your first BootCamp installation in Windows 8 that works. Im so sorry Markeez for wasting your time, my excitement had blinded me last night.
Also be sure to copy both 4.0.4033's folder and the latest 5.0.5033 folders to your Windows 8 desktop as well, dont run them off your USB stick or DVD/C, whatever media you copied them to.
So Markeez, after you download the correct Windows 7 Support Software 4.0.4033, simply click setup.exe and it will run without any trouble.
Then after the inital BootCamp install is complete, your MBP restarted and all is done, you need to perform the "Run as Administrator" trick i posted above. Its real easy. Open notepad, and copy the EXACT code i posted in the tutorial in a fresh new doc, and save the file to your desktop EXACTLY how i posted it Add_MSI_Run_as_administrator.reg
Now close notepad, and double click the newly created registry file, and allow it access to do what it needs. What this does is allows your run the new installer in BootCamp 5.0.5033 as an administrator, which you wont have the option to unless you use this registry file.
Ok after the registry part is done, go inside the latest BootCamp 5.0.5033 folder, to BootCamp/drivers/Apple and find BootCamp --- probanly the ottom most MSI file, and again it will not say MSI on the right side, it will say Windows Installer or something to that degree. Also do NOT confuse it with a similar file in that folder called .bootcamp this is not the one we need. OK, so now, using a WIRED MOUSE, right click the BootCamp MSI file, and you will now have the option to Run As Administrator, if you did the registry bit. IF YOU DIDNT do the registry bit, you will only see Install, Repair, Uninstall etc. If thats the case, just download the zip from my company site, it contains only a completed copy of that reg file.
Running this file in the Apple folder as an admin is the key to making this work, let me know if you have any further issues, im watching. Also i apologize everyone, but for some reason i cant edit the tutorial to fix my mistake, very sorry about the confusion. -
I have a mid 2010 Macbook Pro, How can I install Windows 7 without an Optical Drive?
For clarity: I have a mid 2010, Macbook Pro. I recently decided to upgrade to a Crucial SSD drive, double the ram (8 gigs), and remove the optical drive in favor of using my old drive as a back up. I am also currently running Yosemite.
I want to install Windows 7 onto my SSD, using bootcamp. Unfortunately I no longer have an optical drive installed, which makes things difficult as Bootcamp does not even give me the option to create a bootable USB.
Now, this is where things get kinda fuzzy:
MId 2010 macbooks use EFI, and are quite capable of booting from USB. How do I know? Because I booted from a USB drive in order to do a fresh install of Yosemite on my SSD.
I have read mutliple forums and threads with claims that folks have had no problems doing this on 2008 Macbook Pros running Snow Leopard. However, what seemed to be required was some clever .plist modding. I have used both text wrangler, and x-code to do this, unfortunately upon booting of bootcamp, bootcamp instantly crashes. Naturally, I can restore bootcamp because I made backups of the .plist file.
It would seem that modffying the .plist file assumes that the option to create a bootable USB device is grayed out. In my case, it is non existent.
I have also read that folks have had success using rEFIt, however rEFIt has been forked to rEFIned, and the developer of rEFIned made mention on his site that Yosemite handles booting differently than previous versions of OSX.
WIth that, I was hoping that some kind person could explain to me whats going on, what I am missing, and what I can do to make this happen just shy of tearing down my MBP and reisntalling the Optical Drive and dusting off my Win 7 disc.
Also, my Model Number/Bootrom is MBP 6,2.
Thanks in advance!Thank you for your reply, and the information. This is what I came up with:
I added the strings as instructed, however when I went to sign the script in terminal, I was told:
/Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
/Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
Also, here are screen captures of the lines that I added. Mine are the top string entries:
Thank you for your help, thus far! -
Brand New Mid-2013 MacBook Air battery only 3 hours
I have a 13.3" MacBook Air, i7 procecessor, 8GB RAM, 256GB HD, I went from 8+ hours battery to only 3 now. Hoping someone could help me out..
Here is my EtreCheck
Hardware Information:
MacBook Air (13-inch, Mid 2013)
MacBook Air - model: MacBookAir6,2
1 1.7 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 5000 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9 (13A603) - Uptime: 8 days 12:7:50
Disk Information:
APPLE SSD SD0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 110 GB (21.06 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 140.14 GB (119.24 GB free)
USB Information:
Apple Internal Memory Card Reader
Apple Inc. iPhone
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.microsoft.office.licensing.helper.plist
[invalid] com.oracle.java.Helper-Tool.plist
[loaded] PPPMonitord.plist
Launch Agents:
[invalid] com.oracle.java.Java-Updater.plist
[loaded] Swapper.plist
User Launch Agents:
[loaded] com.google.keystone.agent.plist
User Login Items:
iTunesHelper
VMware Fusion Start Menu
3rd Party Preference Panes:
None
Internet Plug-ins::
SlingPlayer: Version: (null) - SDK 10.8
net.juniper.DSSafariExtensions: Version: (null)
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
Silverlight: Version: 5.1.20913.0 - SDK 10.6
MeetingJoinPlugin: Version: (null) - SDK 10.6
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Bad Fonts:
None
Old applications:
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Lync: Version: 14.0.1 - SDK 10.5
/Applications/Microsoft Lync.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Office Setup Assistant: Version: 14.2.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Setup Assistant.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
7% Google Chrome
4% WindowServer
1% plugin-container
1% EtreCheck
0% mds_stores
Top Processes by Memory:
106 MB Finder
90 MB Google Chrome
82 MB systemstats
82 MB Microsoft Outlook
57 MB mds_stores
Virtual Memory Statistics:
4.35 GB Free RAM
1.70 GB Active RAM
108 MB Inactive RAM
1.02 GB Wired RAM
34.71 GB Page-ins
106 MB Page-outsThe warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
Getting Windows 7 on the Mid 2011 MacBook Air EASILY *TESTED*
Greetings!
As this is my first post, I wanted to make it count. Thus I have decided to compile a simple guide on EASILY getting Windows 7 installed on to your mid-2011 MacBook Air.
I have been following the many threads around here regarding the trouble people are having getting Windows 7 installed on to their Mid-2011 MacBook Air's. I have read complaints of Windows Support Software (drivers) downloads taking too long, of not being able to save the Windows Support Software correctly to a USB key, etc, etc.
The following process is relatively simple, but not as simple as it should be. I'm quite certain as Lion matures, some of the Bootcamp issues we have been having will be remediated.
This procedure has been tested on the following platform:
Mid-2011 11" MacBook Air ~ 1.6GHz i5, 4GB RAM, 128GB Flash (SSD) HDD
What's Wrong?:
1. On the MacBook Air platform specifically, users are expected to have a Windows 7 ISO before beginning. Some users have stated that this can be accomplished easily using the DISK UTILITY ISO CREATION FEATURE. THIS WILL NOT WORK. THE MOST IMPORTANT ASPECT OF PUTTING THE WINDOWS 7 ISO ONTO A USB KEY IS MAKING IT BOOTABLE! You need to make the USB key you're installing to bootable, plain and simple.
2. I tested the Windows Support Software drivers after downloading them and the Intel HD3000 GPU and Sound Drivers do not install properly.
3. Creating a Windows 7 Startup Disk through Bootcamp hangs.
What You'll Need:
1. A Windozzze box
2. A DVD-ROM Drive
3. Internet Access (for downloading a Win7 ISO in case you don't have a Win7 install DVD and other necessary utilities)
4. ISODisk - http://www.isodisk.com/ - 100% FREE
5. Windows 7 USB/DVD Download Tool - http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.h tml- 100% FREE (you may also acquire this tool from Microshaft)
6. A little patience
7. A LEGAL Windows 7 license to activate Windows 7 after 30 days.
8. 2 FORMATTED USB DRIVES.
NOTE: Technically you only need 1 USB drive, however, you will need to get the Bootcamp drivers from OS X onto a USB key. To make this easy, the Windows 7 USB/DVD Download Tool will format one drive as an NTFS partition and the other drive should be formatted as a simple MS-FAT partition (can do this through DISK UTILITY, if you don't know how, Google it, very simple).
Let's Get'r Done:
1. Boot up your Windoze box.
2. Insert your Windows 7 Install DVD into your DVD-ROM.
3. (OPTIONAL) This step may be performed in lieu of step #2 if you don't have a Windows 7 Install DVD, download a Windows 7 ISO (don't download illegaly) from Microsoft. You may skip to step #6 if this is how you're to proceed.
4. Download and install ISODisk.
5. Create an ISO of your Windows 7 Install DVD - Select the DVD within the ISODisk app, choose a name and save location, create your ISO. *This takes a bit to complete*.
6. Download and install the Windows 7 USB/DVD Download Tool.
7. Open the Windows 7 USB/DVD Download Tool, ensure you have inserted the USB key you intend to use for Windoze 7, once the ISO has been created from step #5 or you already have one from step #2, select the USB button and create your USB/Windows 7 ISO Disk (all this does is place the necessary Windows 7 boot files on the USB key so that the Windows 7 ISO may be booted from the USB key).
8. Once complete, safely eject your Windows 7 USB key and move on over to your beautiful Mac. Place the Windows 7 USB Key aside for the time being.
9. Once booted, place the second USB key (the USB key you intend to use for your Bootcamp drivers) into your beautiful Mac. Ensure that it's formatted as MS-FAT, you can do this via DISK UTILITY, Google it if you don't know how.
10. Navigate to Mac HD --> Library --> Application Support --> Bootcamp --> Here you will find a BootCamp DMG file, this is a large file that contains the necessary Windoze 7 Drivers for the MacBook Air, DOUBLE-CLICK IT TO MOUNT IT, a FINDER window will appear revealing its contents. Perform a Shift-A to select all files, RIGHT-CLICK and select COPY.
11. DOUBLE-CLICK your MS-FAT USB key, PASTE the files from step #10 onto the drive. You now have your Windows 7 Driver disk. Place the Bootcamp Drivers USB Key aside for the time being.
12. Open the BOOTCAMP ASSISTANT, this is located in your Mac HD --> Applications --> Utilties Folder.
13. IMPORTANT!!!
Uncheck "CREATE A WINDOWS 7 INSTALL DISK"
Uncheck "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE" - At least for now to get you up and running.
14. Ensure that "INSTALL WINDOWS 7" is SELECTED and click continue.
15. Insert your Windows 7 ISO USB Key into your beautiful Mac.
16. Partition your drive accordingly, create the Windows 7 partition (the Windows 7 USB Key needs to be in the Air for this).
17. As soon as the partition is created, your air WILL REBOOT, the Windows 7 install will begin.
18. You will be prompted that the BOOTCAMP parition is not NTFS and needs to be in order to install Windows 7, THIS IS FINE.
19. Click FORMAT, the BOOTCAMP partition will be formatted as NTFS. Select the same partition number and continue. NOTE: The Windows install IS VERY fast on your beautiful SSD equipped Mac.
20. Once the installation completes, insert your USB Bootcamp key.
21. Navigate to the Setup.exe file on the key and double-click.
22. Sitback and let the Bootcamp drivers load. Windows 7 will reboot.
23. Install your Windows updates and reboot.
24. Reboot again and HOLD THE OPTION KEY, this will allow you to get back into your Mac.
25. Once in OS X, click settings and STARTUP DISK, select OS X (unless you want to mainly run Windoze).
26. Finished.
Please let me know if you should have any questions.
You should now have a fully functioning Windows 7 Bootcamp install with all drivers properly installed. You can check this by navigating to Device Manager within Windows and ensuring that you have no yellow exclamation marks.Sorry, must have been the crackpipe I smoked last night! LOL
You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
ADDENDUM STEP:
This step should be placed between 9-10.
Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
Apologies for missing this.
Best,
WBN
Maybe you are looking for
-
ADD FILES FOR UPLOAD - IMAGE PATHS DO NOT WORK IN WIDGETS
Hi There I'm trying to add my own images to a widget I bought from Qooqee - the Wrapper_v2 image slider. But when I try to add my own images with the image path it doesn't work. I've tried adding the image with 'Add Files for Upload' - and then using
-
How do you Create a hyperlink in Configurator?
Greetings all, Just curious: I'd like to put a link to my blog in the panel I've created - - how would I do that? I'm quite new at programming, so this may be a simple thing, but I'm ignorant on how... Thanks, John :-)
-
Sql statement for a table name with a space in between
Hi, I just noticed that one of my tables for Access is consisted of two word. It is called "CURRENT CPL". How would I put this table name into an sql statement. When I did what I normally do, it only reads the CURRENT and thinks that's the table name
-
Connecting to ABAP Trial Version
Hi all, I am able to install the trial version. I can connect and login and work from the same computer. I have another computer and I would like to connect from the second computer to this one. I am trying to connect from a windows xp box and Trial
-
I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.." I'm still attempting to