Bootcamp Win Server 2008 x64 - No network

I have no networking either wired or wireless with Bootcamp and Windows Server 2008 x64.
I've repaired the drivers from the bootcamp partition on the OSX disk - no change, and uninstalled the device drivers for the ethernet controllers and the Broadcom Wireless 802.11n device in Device Manager, rebooted, windows wasn't able to install the drivers.
Does anyone know where I can download the x64 drivers, for the Broadcom Wireless 802.11n
Both the wired and wireless work Ok under OSX with all updates installed.
Any help would be greatly appreciated.
Thanks
Syl
MacPro 2 x 2.93GHz Quad-Core Intel Xeon
AirPort Extreme Wi-Fi Card-INT

I had the same problem but I came up with a solution. Since I was following some instructions on using Win server 2008 as a workstation I saw that it mentioned downloading Everest Ultimate Edition (trial version worked) to find out what the hard ware was that needed a driver. When I did this I saw that the network device was listed as a Intel 82574L. After finding the name of the hardware I went to "computer management" and clicked on "device manager." From there I double clicked on the network device, clicked on the reinstall driver; from there browse for driver software & let me pick from a list. Select network adapters - intel - and then on the Intel 82574L. Once it installed the network came right up. Hope that helps you out & good luck!

Similar Messages

Hang when opening multiple pdfs: Reader 10.0.1 (Win Server 2008 x64 SP2)

I have recently updated Adobe Reader to the latest patch update 10.0.1.
Previous to this update, I was able to open multiple pdfs at once and had no issues with the Adobe Reader software. After updating to 10.0.1 I've noted that when I attempt to open more than one pdf at a time, Reader hangs (Windows indicates a "Not Responding" error has occurred). After a series of minutes, the second (or third, fourth etc) file opens, and Reader appears to function as per normal..
I'm running Adobe Reader 10.0.1 on a Windows Server 2008 x64 (SP2) box, and didn't have this issue with the 10.0.0 release..
Does anyone else share this issue, and if so, is there an update planned to solve the issue? I would also be happy to provide more diagnostics/specs if these will provide info for developers to chase down the issue here..

I also have Reader 10.0.1 (Win 7 Home Premium x32). I can open several large PDFs (including one over 100 MiB) satisfactorily and then have the whole thing hang. As I am trying to work with these documents, I have not been patient enough to wait for minutes. I just have to terminate Reader and relaunch it.
I have removed some of my DLLs to stop Reader wasting my time preparing a long document for reading, which I do not need . (It would really help if Adobe would provide a setting to turn this off, instead of my having to hack it. )
I never had any similar problems with Reader 9. Did anyone test Reader X before releasing it? I have read elsewhere that turning Protected Mode off may help but...

PAM Clarification Please - Installing Netweaver 7.0 on Win Server 2008 x64

Hello,
I hope someone here can help clarify SAP's PAM documentation (http://service.sap.com/pam) regarding Netweaver 7.0. We are currently running EP7SP16 on Windows Server 2003 x32. We are getting ready to install a whole new batch of portal servers (unrelated to the ones we already have in place) and I was wondering if it was supported, by SAP, to install NW 7.0 on Windows Server 2008 x64.
So, I went to the trusty 'ol PAM to look. Here is where the confusion started. It says Windows Server 2003 x64 is supported, but that Windows Server 2008 x64 is not, at least until Sun releases a 64-bit version of their 1.4.2.x JDK.
The reason I'm confused is I don't understand what the difference is between running Sun's 32-bit 1.4.2.x JDK on Server 2003 x64 as opposed to running the same JDK on Server 2008 x64. Why is 2003 supported and 2008 is not?
Thanks,
Tom
p.s. - Forgot to mention I already read OSS Note #1054740 which talks about 2008, but it didn't really help me in clearing up this question, beyond saying that it does work.
Edited by: Tom Ratrie on Sep 16, 2008 2:27 PM

>
Markus Doehr wrote:
> > The reason I'm confused is I don't understand what the difference is between running Sun's 32-bit 1.4.2.x JDK on Server 2003 x64 as opposed to running the same JDK on Server 2008 x64. Why is 2003 supported and 2008 is not?
>
> 32bit applications are not supported on Windows 2008. And Sun does not support the 64bit 1.4.2 JDK on Windows 2008.
>
>
>
>
> Markus
Hello Markus,
Thanks for the info, but could you clarify it a bit please? When you say 32bit applications are not supported on Windows 2008, do you mean SAP does not support running 32bit apps on a 64bit operating system? I ask this because the PAM does not indicate that. I understand that there is no 64bit 1.4.2 JDK, but the PAM says running Sun's 32bit 1.4.2 JDK on Windows 2003 64bit is supported. So, why wouldn't the same hold true for Windows 2008 64bit?
Thanks,
Tom

Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working

Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
Stefan

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

Pleae help me: I want to install oracle developer on win server 2008

please help me i am try to install oracle developer 10g on win server 2008 but failed because the version of operating system not 5 or 5.1 or 5.2 and it is 6
so i want to install oracle developer 11g on win server 2008 but i am not found oracle developer 11g to download it
please any one help me to solve this problem or help me to find oracle developer 11g
Thank you

Oracle Developler 11g is now called Oracle Fusion Middleware (FMw) 11g and can be downloaded from the Oracle Fusion Middleware Downloads page. You have to download and install WebLogic Server (WLS) 10.3.3 first, then scroll down and download and install Portal, Forms, Reports and Discoverer (11.1.1.3.0).
When you install WLS, make sure you do not run the configuration step. When you install FMw, it will configure the WLS as part of it's configuration step.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to Reactivate RDS TS in Win Server 2008 R2

Good Day,
I had installed Citrix XenApp on Windows Server 2008 R2 Stnd. I formatted the Server with fresh Win server 2008 R2 Stnd: and activate it with existing licences.
1: I have installed XenpApp and activate it.
2: When i tried to activate CALS with License IDs then i got message "It is already Activated" problem is that i did not deactivate first when i was going to format. i should had to deactivate but forgot.
Is there any way to reactivate the CALs or deactivate and active ????
Regards,
I.A.H

Hi,
Please contact the Clearinghouse, explain to them that you forgot to Deactivate the old server before wiping it and are now having a problem re-installing your CALs on your new server, and they will assist you. Please have your authorization number,
license number, agreement number, original paperwork, emails, etc., ready when you call.
Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
http://technet.microsoft.com/en-us/library/cc754874.aspx
Thanks.
-TP

Disable set as background from right click in internet explorer 8,9,10,11 by GPO in Win Serv 2008 R2

Hi.
How to disable ''set as background'' from right click in internet explorer 8,9,10,11 by GPO in Win Serv 2008 R2.
People in my domain can set their background by right click in the pics on their IE, I enabled by GPO a wallpaper by default in ''Administrative Templates > Desktop > Desktop > Desktop Wallpaper'' and I enable too the ''Administrative Templates
> Control Panel > Personalization > Prevent changing desktop background'' at login people have the corporative Desktop but they can change by IE. What can I do? thanks.
<u5:p></u5:p>

Hi,
I test this issue, actually, in IE 11, the option "set as backgroud" is grayed out after I applied policy Administrative Templates > Control Panel > Personalization > Prevent changing desktop background, but seems not suitable for
other versions of IE.
You can try other solutions listed in the similiar thread
How to disable the "Set as Desktop background"?<o:p></o:p>
http://social.technet.microsoft.com/Forums/en-US/889447df-8452-44b4-bcdf-bf217b75ce6f/how-to-disable-the-set-as-desktop-background?forum=windowssteadystate
Regards<o:p></o:p>
Yolanda
TechNet Community Support

Oracle Patch 10.2.0.4 error - Windows Server 2008 x64

Hello!
Could you please give your comments if you have seen errors described below? It appeared during the Oracle Patch 10.2.0.4 installation in Windows Server 2008 x64.
*************installActions2010-08-06_11-02-02PM.log******************
Using paramFile: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.0
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ../stage/Components/oracle.swd.jre/1.5.0.11.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui.core\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The number of files bootstrapped for the jre is 551.
The number of files bootstrapped for the oui is 71.INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Acronis\BackupAndRecovery\;H:\oracle\S50\102
INFO:      CLASSPATH =
INFO: Username:Administrator
INFO: Install area Control created with access level 1
INFO: Oracle Universal Installer version is 10.2.0.4.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.patchset.db, 10.2.0.4.0, >10.2.0.4.0, [ ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom'. Received the value from the default settings.
INFO: install properties filename: C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/oracle.patchset.db_Custom.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'S50102'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_10.2.0.4.0' to 'H:\oracle\S50\102/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.2.7.1.0' to 'H:\oracle\S50\102/ccr'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.11.0' to 'H:\oracle\S50\102\jdk'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.4.0' to 'H:\oracle\S50\102\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'H:\oracle\S50\102\jre\1.5.0'. Received the value from the variable calculation.
INFO: Performing operation for OUI Oracle Home access setup
INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
INFO: This is not a cluster system.
INFO: Node selection page will not be shown.
INFO: Defaulting prerequisite location to 'C:/ORACLE_Patch_10.2.0.4_Windows/WINDOWS_X86_64/p6810189_10204_MSWIN-x86-64/Disk1/stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.patchset.db_Custom
INFO: Starting Prerequisite checks : Fri Aug 06 23:04:20 EEST 2010
INFO: Checking checkToInstallCCR
     This is a prerequisite condition is to check if the ccr component need to be installed or ignored for installation.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains any installed product which is incompatible with the product being installed.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Fri Aug 06 23:04:20 EEST 2010
INFO: oracle.ons Product Location: Empty path specified.
INFO: oracle.sysman.repository.db Product Location: Empty path specified.
INFO:
*** Language Selection Page***
INFO:
*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to '79SSO-LS'. S_LOG_VAR_VALTYPE_CLONE
INFO: Setting languages [fi, en] for patch 'Oracle Notification Service Patch 10.2.0.4.0 '
INFO: Setting languages [fi, en] for patch 'Enterprise Manager Repository DB 10.2.0.4.0 '
INFO: *** Entering Component: oracle.ons installation
INFO: Setting variable 's_sharedOH' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_patchtmpLocation' to ' '. Received the value from the variable calculation.
INFO: Setting variable 's_opmnRemotePort' to '6200'. Received the value from the variable calculation.
INFO: Setting variable 's_opmnLocalPort' to '6101'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
"C:\Program Files\Oracle\Inventory\logs\installActions2010-08-06_11-02-02PM.log"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.err"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.out"
INFO: User Selected: Yes/OK
*************installActions2010-08-06_11-02-02PM.log******************
**************oraInstall2010-08-06_11-02-02PM.err***********************
Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
     at getOSName.performQuery(getOSName.java:16)
     at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2498)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject_s_operatingSystem(Unknown Source)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject(Unknown Source)
     at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:646)
     at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1477)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2430)
     at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3844)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
**************oraInstall2010-08-06_11-02-02PM.err***********************
***************oraInstall2010-08-06_11-02-02PM.out**************************
**************oraInstall2010-08-06_11-02-02PM.out*************************

A similar error is mentioned in MOS Doc 840965.1 (Upgrading Agent 10.2.0.3 To 10.2.0.4 Using OUI Is Failing With "Abnormal program termination") - not sure if the scenario and solution can help in your case.
HTH
Srini

ORA-12560 on win server 2008 R2

I have an oracle DB 11.2 running on win server 2008..
I can connect to a DB, but when I need to make some changes locally, it's not possible.
so:
- the DB and listener are running as a local system account
- I'm loggin into as a local admin (Administrator/pwd)..
- ORACLE_SID has been set in Control Panel --> system (for all users)
- tnsping locally is running OK
- lsnrctl status LISTENER returns no error
- sqlnet.ora has been set:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- there are no remote_listeners
pls, help :)

846417 wrote:
C:\Users\Administrator>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Apr 8 16:21:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter errorLet's stick to the 12560.
Is the OracleService<sid> windows service started?
If started, make sure ORACLE_SID (that sqlplus looks up via its registry settings, if not overridden by env) is correct:
C:\Users\Test>set ora
Environment variable ora not defined
C:\Users\Test>set oracle_sid=xe1
C:\Users\Test>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Beta on Fr Apr 8 13:09:52 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
C:\Users\Test>set oracle_sid=xe
C:\Users\Test>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Beta on Fr Apr 8 13:10:01 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - BetaEdited by: orafad on Apr 8, 2011 1:11 PM
Edited by: orafad on Apr 8, 2011 5:27 PM

Windows Server 2008 x64 and Crystal Reports Server Embedded

We're attempting to certify our software with Windows Server 2008 x64 and want to know the best way to configure both the server and client of Crystal Reports Server Embedded. Currently, our software is certified against Windows Server 2003 x86, and we install Crystal Reports Server Embedded XI Release 2 (no SP) on the application server, and we deploy the Crystal Reports .NET merge modules for XI Release 2 (no SP) on any client machines.
I believe I am correct in stating that no version of Crystal Reports Server Embedded officially supports Windows Server 2008 x64 (based on some other forum postings) until SP1 comes out (which I don't think has happened at this point). If that is true, we can live with installing the RAS on a separate Windows Server 2003 x64, if that's even possible. With that said, can we even get our Windows Server 2008 x64 running with the latest Crystal Reports 2008 .NET merge modules? We've tried many different configurations between CR XI R2 SPs and CR 2008 for both client and server and have very little luck (either it won't install correctly because of x64 or missing .cabs, etc.) on both the client and server side of things.
Can someone suggest the optimal configuration when Windows Server 2008 x64 is in the mix, noting that we can use a secondary Windows Server 2003 (x64 preferred but can fallback to x86)? Or do we have to wait for Crystal Reports Server Embedded 2008 SP1 to be released, and if so, does anyone know of the date?
Thanks,
Ross Beehler

CRSE 2008 is a 32 bit app, it works on 64 bit OS's but all parts must also be running in 32 bit mode.

Windows Server 2008 x64 on T61P?

Hi Everyone,
Just got my T61P with Vista x64 pre-installed - love my Thinkpad! However, like just about everyone on the planet I'm disappointed with Vista and would like to install Windows Server 2008 x64 Standard (no hyper-v) just like on my office desktop computer. If you have not yet run Windows Server 2008 it is an *outstanding* OS, as good and wonderful and just right as Vista is, well... annoying.
Anyone installed Windows Server 2008 x64 on their Thinkpad T61P? My experience with the office desktops is that so far Vista x64 drivers work just fine on Server 2008 x64. Any tips?
Thanks in advance!

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

Replicate win server 2008 r2 with win server 2012 r2

I have AD on win server 2008 R2
Can I replicate it with win server 2012 R2
Nagy Anwar

Hello,
there is no problem to add a new Windows Server 2012 R2 into the existing domain.
http://blogs.msmvps.com/mweber/2012/07/27/upgrading-an-active-directory-domain-from-windows-server-2008-or-windows-server-2008-r2-to-windows-server-2012/
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

I have installed Adobe Acrobat XI on citrix (server 2008, x64) and need to suppress repair option in Help menu for the users via registry.

i have installed Adobe Acrobat XI on citrix (server 2008, x64) and need to suppress repair option in Help menu for the users via registry. Have tried Disable_repair dword key in HKLM\software\Wow6432Node\Adobe\AdobeAcrobat\11.0\Installer and it does not work. please help.

Look in the ETK Preference Reference here: Installer settings

Problem Installing EM Cloud control 12c in Win Server 2008

Hi All,
I having problem installing the EM in win server 2008 64bits. I already installed java run time but when i click on the setup.exe in the disk 1 after unzip it does not show the installation wizard and any error message. Did i miss out something? do i need to create the user group and user as stated in the installation guide as stated in this link Installing Enterprise Manager System - 12c Release 1 (12.1.0.1)?

Hi, can you open an SR for this issue and share the number. Lets check few basic things:
a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
b) Can you make sure that you unzipped all these zips files in a single folder ?
c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
install      libskgxn      plugins     response     stage     WT.zip
jdk     oms     runInstaller      wls
d) Can you invoke setup.exe -debug
then look at the logs from -
C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM   ( for windows it will be orInstaller.err and log )
You donot need any user group or any thing created.

Bootcamp Win Server 2008 x64 - No network

Similar Messages

Maybe you are looking for