Bootcamp Windows 7 from External Drive Hangs

Hi All,
I recently removed my Macbook Pro's internal optical drive and replaced it with a 128GB SSD. I am running OSX 10.8.3 off of the SSD but can not get bootcamp to install Windows 7. I walk through the first steps with bootcamp assistant and partition spase for Windows. All is well untill I have to restart the machine and boot into the external optical drive. I select the Windows CD from the boot menu but the MBP hangs on a grey screen with the Apple logo and the drive spins down.
Any suggestions on how to get the MBP to boot from the external optical drive?

Apple admits in one tech note to poor FW800 speeds on Mac Pro.
Hard to get rid of GPT but if you format the drive to MBR in Disk Utility and FAT you can then convert or reformat to NTFS.
No mention of the make of the case.
FW400 is pretty good. But why not use eSATA PCIe and SATA. Native if possible (no FW/USB type cases, or Oxford with multi interfaces). Works for me, using FW400 or Sonnet Tempo E2P or E4P (but not both together in Windows).
The hot fix wasn't that for XP or something?
Motherboards like Gigabyte are coming out with a dual-use port for SATA and USB3. FW seems like proprietary, not really adopted or supported outside Apple.
And I'd say there are problems with NTFS drivers for OS X so that is an issue.
Also, as nice as it may seem, Boot Camp's AppleHFS.sys and HFS+ support for read-only in Windows causes other problems and side effects, like Windows 7's Backup facility to not work.
When I get a drive, I use Windows and the vendor's (WD etc) hard drive diagnostic to do a full test, zero, etc and almost invariably drives formatted in Mac OS had trouble and worked better after such tests and formatting.

Similar Messages

  • MBP: boot to Windows 7 from external drive?

    MBP: booting to Windows 7 from an external drive? Is this poss?
    Further, is it possible with a 1TB external drive to partition it to two 500MB volumes, and have one (a) with a bootable clone of the OSX, and the other (b) with 64 bit Windows 7?
    I would keep (a) ready in case of a HD failure on my MBP, and use (b) for a couple of PC progs I have that I don't want to go to the trouble of buying the Mac version. They run fine on a PC.
    Also would be good for checking cross-platform compatibility of websites.
    Would these work with eSata connections (Time Machine doesn't)? or else I'll go FW800.
    Cheers!

    No, as mentioned 10's of dozens of times, Windows won't.
    OS X has always allowed booting from Firewire, and now USB (but that is slow).
    Casper 6 will backup Windows to another drive, as will Windows Home Server to external devices.
    Many programs can be run through a VM like VirtualBox, Paralells, Fusion.
    SuperDuper is just one of the more popular programs to backup (clone) OS X and have it bootable.
    Never rely on just one backup set or drive.
    If you can go with eSATA (ExpressCard) that is faster but FW800 would be okay and be bootable, eSATA probably not.
    Check http://www.macsales.com/firewire for both

  • Restoring backed up Windows files from external drive

    Hi
    I have just recently bought an iMac with OS Lion.This is the first Apple computer Ihave had and i've made the switch from Windows.I would like to know how I can restore my backed up Windows files (photos and music in my iTunes library) which ison an external hard drive to my Mac?
    Also.Where the **** is the delete button? 

    MacBose wrote:
    I have just recently bought an iMac with OS Lion.
    Welcome! 
    how I can restore my backed up Windows files (photos and music in my iTunes library) which ison an external hard drive to my Mac?
    This may help:  OS X Lion: About Windows Migration Assistant (but it will make a new User Account on your Mac).
    This might be better:  Switch 101: Migrate your Windows files or system to your Mac
    In general, see http://www.apple.com/support/switch101/
    This might be helpful:  http://www.apple.com/support/mac101/tour/
    And a bunch of video and text tutorials here:  http://www.apple.com/findouthow/mac/
    Where the **** is the delete button?
    Should be at the upper-right, next to the + key, depending on your keyboard.  In many cases, Cmd-X will work, too.

  • Solution - install Windows 7 with external drive bootcamp lion

    I finally found a solution to "trick"the Windows install!
    The first install will run also from external drive. The problem ist the reboot!
    On every reboot simply plug out your external DVD and press option-key. Select Windows harddisk and the installation
    will continue. Plug in your external DVD once you see "Starting Windows".
    Repeat this on every reboot until Windows is installed!
    That´s it.

    A Mac Pro workstation is unique in many many ways....
    http://www.apple.com/support/macpro
    Besides having 4 internal hard drive bays, two internal optical drive bays.

  • I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to the new one. How do I make bootable clone of Bootcamp?

    Hi I just got a new MacBook Pro I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to my new Macbook Pro  Mac OS X 10.7.4  2.6 Ghz Intel Core 17. How do I make bootable clone of Bootcamp?

    you can't just move XP even if you took the hard drive and have Windows boot and function.
    Apparently there are Windows tools to sanitize the OS and strip all the motherboard drivers and services.
    Time to get a supported OS. Don't want to pay, then use 8 for the time until it goes on sale.
    There are no drivers for even Vista on 2011 and later Macs.

  • Install BootCamp windows 8 on external Boot Disk

    I have no internal hard disk, for other reasons. I need to install Windows 8 on an external hard disk, which is partitioned, and I boot from one partition (and the drive is GUID). My windows 8 is in the form of an iso, and I cannot burn it to a disk, although I could burn it to a USB drive. If you need any other info, I can provide it.
    Thanks in advance,
    Oscar Simpson

    You cannot install Windows on an external drive. Microsoft only allows you to install it on an internal drive.
    There's a Windows 8 feature called Windows To Go, that allows you to put your Windows system onto an external drive, but to do this, you need Windows 8 installed on the internal drive

  • Trouble Booting from External Drives - MBA 2012

    Hello,
    I have a brand new 13" MBA which I'm working on building an image to use for deployment using Carbon Copy Cloner 3.4.5. For whatever reason, I can't boot the new 2012 MBA from an external LaCie FW800 or Thunderbolt 1TB Little Big Disk that is running either 10.7.2 or 10.7.4. As soon as I select the drive to boot from when holding the Options key or from selecting the partition from Startup Disk in System Preferences, I get the do not enter icon(circle with the diagonal slash). I tried both plugged in through a Cinema Display and plugging the Thunderbolt drive directly to the laptop. I confirmed both LaCie drives boot properly on an iMac and the last gen MBP/MBA.
    Laptop Specs:
    13"
    1.8GHz Dual-core i5
    8GB
    128 SSD
    10.7.4
    Curious if anyone has run into any problems booting from external drives on the new 2012 MBA.
    Thanks,
    Paolo

    Please be sure you have prepped these external drives correctly:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    My suggestion for cloning is to use Disk Utility. This will also automatically clone the Recovery HD, as well:
    Clone Lion using Restore Option of Disk Utility
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Select Disk Utility from the main menu then press the Continue button.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • Broken in Logic 9?: Reindex loops from external drive

    Adding loops from an external drive in Logic 9 does not seem to work any longer. It used to work great in L8. Anyone have similar experiences? Know any work arounds? Is it a bug? If it's a bug I'll file it with Apple.
    Previously in Logic 8 it was easy to reindex loops on an external drive:
    (1) Delete the loop indexes from root/Library/Audio/Apple Loops Index
    (2) Use Finder to locate the loops on the external
    (3) Drag the loop folders into the L8 media browser.
    (4) L8 asks if you want to copy the loops or use them from their present location. Select present location intsead of copy locally.
    (5) L8 takes 5-20 minutes to build index of loops from external drive
    I have tried this procedure several times in L9 without success. Instead I get the following:
    (1) Delete the loop indexes from root/Library/Audio/Apple Loops
    (2) Use Finder to locate the loops on the external
    (3) Drag the loop folders into the L8 media browser.
    (4) L9 ask for my admin password.
    (5) Enter my password
    (6) I'm NOT asked if I want to copy loops locally or use them in their present location. Instead a reindex progress dialog comes up for 2 seconds then goes away.
    (7) In the end nothing happened. No loops copied, indexed, or anything
    There is only one way I managed to get loops into L9 but it is exactly what I'm NOT looking for:
    (1) In the folder with all my loops spotlight search ".CAF" (In this case want to reindex Apple content which is all CAF)
    (2) Make sure to click "show more" at the bottom of the search results.
    (3) Drag the search results to the loop browser.
    (4) L9 indexes them all right, AND also copies them to my user library! All 30 GBs worth. Definitely not what I want.
    In the end, I had to reinstall the Loops from the DVDs and specify an external location for them. (This whole mess got started when I tried to move the GarageBand and iLife loops to an external drive. The installer does not let you specify a location for them.)
    Just so you know I've done some homework:
    I've scoured other Logic forums and found these relevant threads that in the end did not solve the issue. They mostly seem to refer to Logic 8 which does not have this issue.
    @ LUG
    Thread 1
    @ Logic Pro Help
    Thread 1
    Thread 2
    Thread 3 this fellow seems to have a similar problem as I. He drags folders into the loop browser but nothing happens.
    @ Apple Discussions
    Thread 1
    Thread 2

    I just installed LP9 and all my loops and samples are on external drives. The drag and drop onto the browser method worked fine and I WAS given the option to move the files or not. The only exception to the above is Ultrabeat samples. They seem to want to be on the System drive.
    RW

  • My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

    My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

    If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
    Or you could move them to the internal drive and double-click on them once the move is completed.
    To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

  • Since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists

    since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists?

    My own opinion is that you should install the later appropriate version of Silverkeeper. That said, I would in fact recommend if you can wait a few days for an answer, that you email the La Cie Silverkeeper backup team via the email link on the site at http://www.lacie.com/silverkeeper/
    They are careful to say they are not officially providing a backup service, but when I emailed them with a query regarding usage about a year ago after downloading Silverkeeper for myself, I got a reply within a couple of days that cleared up my question.

  • Can't read iPhoto library from external drive

    I suddenly can't can't read iPhoto library from external drive. I have talked to WD and nohing is wrong with the network drive. I can open images and files from it. But, I can't read in iPhoto Library.

    Network Drive? a NAS?
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
    Basically, you need to move the library to a correctly formatted disk.

  • External Drive with Time Machine, booting from external drive with utilitie

    I'm using Time Machine now with
    a LaCie 1TB external hard drive.
    Everything works fine.
    But, I've been wondering:
    Can I place a program like TechTool
    on the external drive (that Time Machine uses)
    and boot from that external drive.
    I would like to be able to do that,
    because diagnostics and repair programs
    only works properly and fully when they run from
    external drives. Anything on the internal drive can be repaired
    and examine. Impossible to do if Techtool is on the same
    drive that's been examined.
    Any thoughts as to what I should do?
    Thanks
    iMac, Leopard, Time Machine, Lacie Quadra 1TB drive.
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?

    pitou wrote:
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?
    As V.K. says, you can't boot from TM backups.
    But you can restore your entire system from any one of them, per the procedure in #14 of the Frequently Asked Questions *User Tip,* also at the top of this forum.
    You can also selectively restore from them, while running normally. See #15 in the FAQ Tip.
    You might want to review these:
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine
    and perhaps browse the rest of the FAQ Tip.

  • Problems booting from external drives

    Ever since I got this 6-core 2013 MacPro (January 2015), I have had strange problems and glitches, but for this posting, I am talking about problems being able to boot up from external drives. I took the 4 external drives out of my old 2009 MacPro and put them into a 4-bay Thunderbolt enclosure. This enclosure can be configured as a RAID if all drives are the same (which they are not) or it can just be a place to be able to access all 4 drives. I used to be able to boot from each of those drives on the older MacPro but I am unable to do so now. They show up in the System Preferences/Startup Disk but if I choose one, it just reboots into the new MacPro drive. I even tried pulling out a couple of the drives and mounting each into a USB 3.0 (Sabrent) dock and still I could not boot from those drives which have the latest version of Yosemite. Yes, they are formatted correctly. I used to boot from them. I was able to clone one of the drives to a Seagate USB 3.0 hard drive and boot from that. Although, the clone was not perfect. It didn't transfer all my settings so I could recover some logins and serial numbers I wanted that I have never been able to retrieve since I got this new Mac.
    Yesterday, I formatted a 32GB flash drive and tried to install Yosemite on it. I planned to put DiskWarrior on it. When I started to install Yosemite (from a saved download) it let me choose that drive, but when it restarted before installing, I was right back where I started on my MacPro's hard drive.
    Is this normal behavior for the 2013 MacPro? Or is it just mine? I am beginning to think I may have a lemon since I have had other strange problems that don't go away.

    Not all external devices are bootable. First stop would be involve whoever handles the 4-bay Thunderbolt. Seeing how it has a bridge most likely in order to support RAID mode that may not have the correct frmware or other reasons.
    https://bombich.com/kb/ccc4
    https://bombich.com/kb/ccc4/search/bootable%20volume
    CCC is the only program I would be using.

  • I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
    Your best bet may be to just reset the router and set it up again.
    Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

  • Best method of importing from external drive?

    I have a 1T LaCie and want to know the best method to get those images into LR. The defaults are: "Add" and "NewPhotos" to "MyCatalog"
    I think I may have more than one catalog and am not certain how to combine them. Is it best practice to have only one catalog?
    Thanks in advance,
    Mr Mayor

    Duplicate thread, see Best method to import from external drive?

Maybe you are looking for