BootCamp Windows 8.1 Display flicker early 2015 macbook pro 13

I've used the Boot Camp Assistant to install Windows 8 on my early 2015 MacBook Pro 13. After running windows update and installing Windows 8.1 my display will flicker upon login to the windows partition. That said I do not experience the flickering screen each time I login to the partition, it is only once in a while, and I've not been able to isolate exactly what happens that causes the screen to flicker (broadwell driver?).
Has anyone experienced this also? Have you found a method to update the drivers or keep the display from flickering? I've re-installed the most recent drivers using Boot Camp Assistant before and after the updates had taken place and still experienced the display issue.
Again, it is not every time I login to the windows partition only when I seem to need it most...

Please use Bootcamp Assistant. The new BC drivers are available for 2015 models.
Reference - System requirements to install Windows on your Mac via Boot Camp - Apple Support.
MacBook Pro
Mac model
Windows 8 64-bit
Windows 7 64-bit
Windows 7 32-bit
Windows Vista 64-bit
Windows Vista 32-bit
Windows XP 32-bit
MacBook Pro
(Retina, 13-inch, Early 2015)
BCA

Similar Messages

Bootcamp windows 8.0 pro installation issue with early 2015 Macbook Pro

I am having this issue with installing Windows 8.0 pro (and 8.1 pro) on my early 2015 MacBook pro vs. Bootcamp. I have tried different method for multiple times and all failed. Any help is appreciated.
Hardware: (1) early 2015 MacBook Pro with 128GB (13 inches) , (2) Sony USB DVD burner. (3) Two 16 gb flash drive 2.0 version from two different manufactures
Software: (1) 8.0 Pro ISO on flash drive from Microsoft (I have two copies) (2) 8.1 Pro downloaded from Microsoft website.
Note - I was able to download the bootcamp supporting files successfully and copy to a USB flash drive.
Method 1 - Create the installation disk from ISO on flash drive and also tried copying ISO on hard drive (desktop)- failed.
I have a 16 GB flash drive (2.0V) connected
ISO is a valid 8.0 pro copy from Microsoft came on a flash drive.
I have the windows 8.0 pro ISO on a flash drive and plugged in.
Issue - It gets to around 50% of "Copying Windows files..." and then doesn't go any further. 8 hours later, still stuck at around 50%. I also tried to do the copy ISO from desktop. failed as well.
Method 2 - I repeat the above steps with Windows 8.1 ISO downloaded Microsoft website - failed. Stuck at 50% copying windows file for 9 hours.
Method 3 - I burned the Windows 8.0 pro ISO to a DVD and try to do the installation through a DVD instead. DVD was successfully created.
I was able to perform the partition. When the computer reboots, it starts the window installation. However, it got stuck at 7% forever. I tried this multiple times and failed.
Method 4 - I download a 8.1 Pro ISO from Microsoft website, I burned it to a DVD. Repeat method 3, Again, windows installation stuck at 7%.
Method 5 - I called Apple. - What they told me is pretty much repeat the above steps. Still failed.

The ISO file(s) being downloaded seem to be corrupted. Can you use Microsoft FCIV tool - https://support.microsoft.com/en-us/kb/841290?wa=wsignin1.0 ?
The DVDs should be burnt at the recommended rate for the physical media. DU should be used for burning the DVDs.
Reference Disk Utility 12.x: Burn a disk image to a CD or DVD and Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support.

My Early 2015 MacBook Pro fans are at 0 RPM and my cpu temperature never fluctuates

Hello all I have had a Mid 2009 macbook pro for 5 years now and just got my Early 2015 MacBook Pro. On my old macbook i used iStat and SMC fan controller religiously and everything worked great.
Now with my new Early 2015 MacBook Pro, My CPU sensor doesn't even show up in iStat, and in my top toolbar, SMC controller shows my CPU temp never moves, and my fans are at 0 RPM. I cannot hear any fans moving at all when in a completely silent room, and my ear is to the computer.
I downloaded a game to stress the CPU to see if it'd change, and it doesn't all the way up to the fans just coming on at 6000RPM and the CPU is very high like 80-90C
I have already reset my PRAM and SMC and was wondering if anyone here has been monitoring their temps and have seen the same thing?
Thanks

I also have an Early 2015 rMBP w/ i5-5287U cpu. I am using Temperature Gauge from the Mac App Store and getting similar if not slightly worse results. I'm usually Idling somewhere between 45 and 60 C with almost no activity. When I run games, forget about it (see below), temps up to 103 Celsius. I also experience almost no fans until at least 70 C, and then during gaming the heat is not coming down.
Given that the cpu is supposed to shut itself down at around 105 C, I'm thinking that the programs are not decoding the temperature sensors correctly. This is my first Mac so it's hard for me to compare performance. I expected better heat regulation. I was trying to avoid programs outside of the mac store for this type of thing, but I'm considering OGELTHORPE's suggestion for istat menus, as they do claim to support early 2015 MacBooks. Have you tried this program yet?

Updated to 10.91 now bootcamp 5 was installed in my early 2009 macbook pro which according to Apple should use bootcamp 4.x, how do I fix this?

I had Bootcamp 4.1.4586 with Windows 7 PRO 64 bits installed and running prior to updating to Maverick 10.91 on my early 2009 MacBook Pro 17". Did the 10.91 Maverick update to my OSX and now Bootcamp 5 is installed and doesnt run. HELP how do I fix it
Also there is no way to connect to update the drivers nor bootcamps the servers are always full

Blank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser

Using USB for Bitlocker in a Bootcamp install of Windows 7 x64 Ultimate on early-2011 Macbook Pro

First of all some details on my current setup:
Macbook Pro 15" (early 2011) with a i7 QM processor and 8 GB RAM, Superdrive and HD installed
Mac OS X 10.7.3
Windows 7 x64 Ultimate in a Bootcamp setup
Existing partitions on HD are EFI, MacOS X, Bitlocker Startup, Windows
I removed "Recovery HD" after creating DVD image contained in latest Lion installer from AppStore.
What I got so far:
It took some time to find a way for Windows getting a second partition to be used for Bitlocker startup files. Using existing partition layout I replaced previously existing "Recovery HD" partition for Bitlocker partition in Windows (after taking dd-based image of Recovery HD).
Recently I tried to enable Bitlocker and continued to fail on Bitlocker System Check claiming to have no access on USB while booting. And that's my issue ...
I read about using Windows' diskpart to have a GPT partitioned USB stick containing single NTFS partition. I tried to achieve the same with disk management in Mac OS X though it was creating a hybrid MBR/GPT setup that wasn't recognized by Windows at all. Then I tried partitioning in Mac OS X to have GPT partitioning, used Clonezilla Live CD's gdisk to apply hybrid setup another time. I even tried to do the whole partitioning in Linux using gdisk, but Windows still didn't recognize the formatted partition on USB stick then. So, the only way found is using diskpart in Windows to get a GPT-based USB-stick with a single NTFS partition.
I put my startup key there (attributed as hidden, system file) and tried to restart several times. On every boot Windows is prompting for inserting valid startup key as it wasn't found. The partition is encrypted already and entering the printed 48 digits recovery key gets me in every time.
If I keep the stick inserted the boot is noticeably delayed, but it's instantly continuing as soon as I unplug the stick. So there is something processing the stick ... I tried different sticks, but hope it's not related to using one special stick since they are used to support similar (equivalent) interfaces, aren't they?
Don't tell me about using TrueCrypt or similar as I prefer to use existing software instead of adding 3rd-party software doing things the same way. And for True Crypt USB must be readable at boot as well. And previous trials with different approaches rendered all failing at some point of setup. Finally, I don't want to reinstall existing Windows as it keeps me from working even more.
Found some post regarding trouble with Lion installations (e.g. I can't use rEFIt ... it simply didn't show up and this seems to be related to using Lion), found the KB article of Apple on preparing USB external storage for use at boot, but all troubleshooting hints didn't help.
What the heck is wrong with this setup?
EDIT: There is no problem to have Bootcamp starting previous Recovery HD partition now Bitlocker startup partition instead of originally prepared Bootcamp partition, which is encrypted now. This is in contradiction to other posts here. I'm sure Apple support isn't best choice to ask for support as this problem is MS specific and thus Apple won't care that much ...

Well, I've seen lots of those threads as well and most failed to manage cooperation of Bitlocker and FileVault, have trouble to get a second partition for windows to use with bitlocker or truecrypt etc. But these issues don't apply to me anymore.
Next there are threads instructing how to get a USB stick to work with Bitlocker claiming to have GPT instead of MBR so EFI is gaining any access on them. Those cases seem to work with MacBooks running with Windows, only, thus passing the issues mentioned in paragraph before as well.
And there is my confusion originating from: I can remember some sites claiming to have trouble with EFI on a Mac using Lion, but all those sites are older than Lion's final release date. So I don't know if there is a similar issue today or if I'm actually missing some option ... rEFIt isn't working with Lion according to the refit site itself. Some sites claim EFI is behaving differently on whether there is a super drive or not as Lion isn't supporting USB booting as long as booting from DVD/CD is available ... what's true about those facts? Is my problem related to having a super drive? Are things getting better as soon as I'm replacing my superdrive by a second internal drive? Is it that strange or some sort of plausible behaviour?
According to GPT, Windows 7 is obviously failing to properly detect hybrid MBR/GPT setups on USB sticks while that's what MacOS' disk manager is doing on having GPT-based single partition stick with exFat format. Instead of using the second hybridized partition it's accessing the protected part, only. If I'm converting a disk to GPT in windows everything works fine, but then without hybridized MBR ...
Regarding the fans I'm with you ... as soon as processor load is exceeding 5% the fans get quite noisy ...

New install (early 2015 MacBook Pro) doesn't enable Scanner

Setting up this printer on new MacBook Pro and the Scanner isn't being enabled via the standard setup. I installed the HP driver (HP-Inkjet-SW-OSX-Mavericks_v12.34.37.dmg) but this did not work.
I'm used to the Scan option occuring in System Preferences > Printers and Scanners but the printer is only showing up with the Print option.
I'd like to have the Scanning option from the System Preferences view - this has worked find on other Mac models running Yosemite so not sure what the issue actually is...

Hello @AfroCreep , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help!
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Officejet Pro 8600 Plus e-All-in-One Printer Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

Not sure if this will help anyone, but I had trouble installing on 10.8.
I then found this particular support page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
I use the printer through usb but my wife uses wireless from her PC laptop.
Andre Francis

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

I have a early 2011 MacBook Pro upgraded to mavericks and windows 7 install cd what do I need to install bootcamp properly?

I have a early 2011 MacBook Pro upgraded to mavericks and windows 7 install cd what do I need to install bootcamp properly? I have the bootcamp assistant in my utilities folder but do I need an older version it's the 5. Something from mavericks and which drivers do I need my my computer?

Boot Camp Assistant is already installed.
Boot Camp 5.1- Frequently asked questions
Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp- Frequently asked questions about installing Windows 8
Boot Camp- Installing Windows 7 Frequently Asked Questions

Early 2013 Macbook Pro Retina 2.7 i7 512GB SSD and 16gb Ram with Serious Cuda Problems! Trying to teach Apple their Macbook Pro Retina isn't a Pro Jan. 11. 2015.

Apple replaced the logic board, wiped the computer, did a fresh instal of the OS, and also a fresh instal of all the programs during the beginning of 2015. The GeekBench scores are the highest of any of the similar computers (at least on the day of my testing). But here's what's happening. The Macbook Pro Retina has a GeForce GT 650m with Cuda Technology and it can't handle editing in Premiere Pro with Cuda Acceleration turned on. Open CL, a second form of graphic acceleration on the Macbook Pro, appears to be functioning properly.
At the Apple Store on 1-10-2015, I was told that since the logic board and the graphic cards have been replaced that there is nothing they can do and they recommend contacting Corporate. This comes after they told me to buy a new logic board and that that would solve the problem. This comes after Apple did not listen, for over a month, about the possibility that they didn't properly build a professional notebook computer.
The computer displays a black program monitor screen, at random times, when the user edits footage with Cuda Acceleration enabled. It used to lead to an entire system crash and/or a Premiere Pro crash before the operating system was completely re-installed. My solution, since I bought the computer, was to edit in Open CL... However, I've come to learn that there is a major difference in performance between Open CL and Cuda Acceleration.
For the Macbook Pro Retina, Adobe Media Encoder render times are about 20% faster with Cuda Acceleration than Open CL. The 2013 Macbook Pro Retina appears to be able to handle Cuda Acceleration in Media Encoder, but I have had a number of issues leading to program crashes on every project before the new logic board and operating system were installed. For over a year and a half, I actually never used Cuda Acceleration. Having sent every crash report and user data to Apple over that time, I truly expected an update of some sorts and it never came.
FYI: The latest Macbook Pro Retina uses the GeForce GT 750m... This is essentially the same graphic card that performs about 10 - 20% faster due to a new "boost mode." More importantly, it actually has the exact same number of Cuda cores. Having the same number of Cuda Cores means that the Cuda Acceleration is essentially the same when exporting or viewing video. To prove a point to Apple that their 2013 Macbook Pro Retina isn't functioning properly, I bought the latest computer with the 2.5 i7, 16gb Ram, 512gb SSD and I can honestly say that the 2014 model works perfectly fine with Cuda Acceleration turned on while editing in Premiere. I can also say that a proper render test proved the 2013 and 2014 model to be the exact same.
I'm new to this whole pay $2700 for a computer that your manufacturer didn't / can't test properly, so I will be contacting Apple and speaking with Senior Advisors, their Customer Support division, and will soon speak with their Corporate branch. I'm confident that the Early 2013 Macbook Pro Retina with a 2.7 i7 16gb Ram and a 512 SSD is nearly the same at rendering video and editing video, provided the Cuda Acceleration works, as their latest 2014 Macbook Pro Retina with the 2.5 i7 processor 16gb Ram, and a 512 SSD. It's truly a great computer and a great build, minus their current inability to properly test / diagnose their computer.
Knowing that the latest graphic card in the Macbook Pro lineup is essentially the same model, I feel that Apple is not directly looking into the viability and life span of their current Macbook Pro Retina product line. They can't test for performance issues relating to their graphic cards, so why consider buying from them when the end user is actually in a position to experience up to a 20% decrease in certain professional programs.
For future reference, I'd strongly urge other individuals to avoid purchasing Apple products if they offer Cuda Technology. In my opinion, Apple is an Open CL organization, at best, who is not responsibly manufacturing / producing computers that fit their organization's strengths. For a fact, they can't test their Cuda Technology and won't even attempt to address Cuda Acceleration errors for Apple owners (01-11-2015). I say this having walked out of the Apple Store on 1-10-2015 with virtually no support other than to contact Corporate.

Looks like a RAM issue.
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000

Can't install windows 8.1 on 2015 MacBook pro

I'm trying to install windows 8.1 with boot camp and this is the message I keep getting. I've tried several times and every time I get this. I have a 2015 MacBook Pro. I've tried installing from a usb with ISO and also from a oem windows dvd. Any help would be appreciated.

First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

New 2015 MacBook Pro 13 Iris 6100 - can it run single 5k display?

Hello. I'm thinking about buying the new 2015 MacBook Pro 13-in with Retina Display with the new Intel Iris 6100 and pairing it with a Dell UP2715K 5k monitor to run 2560x1440 in retina mode.
The specs on the Apple.com website for the new MacBook say the following:
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on up to two external displays, both at millions of colors.
Although there's no mention of 5120 by 2880 support it can successfully run two 4k monitors simultaneously, which I would think is more demanding than a single 5k monitor.
Can anyone offer any insight?
Thank you.

Allright, it took me some time to figure out why the write and read speeds were lagging compared to numerous speed tests of rMBP 13" of same year and build.
During the setup process, when starting up your new rMBP the first time, you'll be asked whether you want to activate FileVault. I activated it.
As soon as you turn off FileVault and restart your mac and do the speedtest again, it should give better results. As shown in the screenshot you can see that my write and read speeds are now on par with the other speedtests on the internet. Both 1080p50 and 1080p59.94 formats at 12 Bit RGB are now checked.
Turning off FileVault solved this issue.
P.S. the whole thing about the NVMExpress only applies to the early 2015 12" MacBook. http://www.macrumors.com/2015/04/11/nvme-mac-os-x/

Can I hook up an early 2011 macbook pro to a new iMac AND another thunderbolt display?

I want to get a new iMac, and I have an early 2011 macbook pro. Can I use a two-way thunderbolt cable to hook these two up? If so, will I still be able to use full functionality on both as I move windows to and from one of them? (Like, I use my macbook track pad to move a safari window over to my iMac, and then I can either use my iMac mouse or my macbook's trackpad to do things with that safari window.
ALSO, is it possible to hook up an additional thunderbolt display to all of this? Basically my end-goal is to have a macbook pro hooked up to an iMac with an additional thunderbolt display, that's my "dream set-up" which will make a lot of stuff that I do a lot easeir and less crowded on one moniter.

no the thunderbold display thing would let you use the imac as a monitor for the macbook apart from acting the role of display the imac would be dorment so a very pricy monitor

Install Windows 7 64-Bit on Early 2008 Macbook ?'s

My wife has an early 2008 Macbook with 2.4 GHz processor that I recently upgraded the OS to OS X 10.7.5 and upped the ram to 4 GB. I had installed a Boot Camp for Windows Vista 32-bit that is still working, but I have a Windows 7 64-bit installation disc that I would like to use on this machine. I want to completely delete the existing Windows Vista install and put Windows 7 in its place. I have found through my research that even though the 64-bit version of Windows 7 is "not supported" for this machine, it will still work with the right drivers and will require Boot Camp 4.0
My questions are:
- Will the 64-bit version of Windows 7 definitely work on this machine?
- How would I delete the current Windows Vista installation?
- Where do I get the 64-bit Apple drivers for Windows 7? I keep reading about pulling them from the Snow Leopard install DVD, which I have, but I am currently running OS X Lion on the machine, which I do not have a disc for (only received a download code from Apple). Would the drivers be built-in to Boot Camp 4.0?

1. From Boot Camp Support Software 4.0.4033 (these can be directly downloaded to the Windows side, once Windows is installed).
System Requirements
MacBook (13-inch, Late 2006)
MacBook (13-inch, Mid 2007)
MacBook (13-inch, Late 2007)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook (13-inch, Early 2009 & Mid 2009)
MacBook (13-inch, Late 2009) *
MacBook (13-inch, Mid 2010) *
MacBook Air (13-inch, Early 2008)
MacBook Air (13-inch, Late 2008 & Mid 2009)
MacBook Air (11-inch & 13-inch, Late 2010) *
MacBook Pro (15-inch & 17-inch, Core 2 Duo)
MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
MacBook Pro (15-inch & 17-inch, Early 2008) *
MacBook Pro (15-inch, Late 2008) *
MacBook Pro (17-inch, Early 2009 & Mid 2009) *
MacBook Pro (15-inch, Early 2009) *
MacBook Pro (13-inch and 15-inch, Mid 2009) *
MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
Mac Pro (Mid 2006)
Mac Pro (Early 2008) *
Mac Pro (Early 2009)
Mac Pro (Early 2007)
Mac Pro (Mid 2010)
Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
Mac mini (Mid 2007)
Mac mini (Early 2009 & Late 2009)
Mac mini (Mid 2010) *
iMac (17-inch, Late 2006)
iMac (20-inch, Late 2006)
iMac (24-inch, Late 2006)
iMac (20-inch & 24-inch, Mid 2007)
iMac (20-inch & 24-inch, Early 2008)
iMac (20-inch, Early 2009 & Mid 2009)
iMac (21.5-inch & 27-inch, Late 2009) *
iMac (27-inch, Late 2009) *
iMac (21.5-inch, Mid 2010) *
iMac (27-inch, Mid 2010)
iMac (21.5-inch, Mid 2011 & Late 2011)
iMac (27-inch, Mid 2011)
all these drivers support Windows 7, 32 bit
* drivers that support Windows 7, 32 and 64 bit
2. Ensure that the CPU is 64-bit capable. From OSX Terminal...
sysctl -a hw.cpu64bit_capable
hw.cpu64bit_capable: 1

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

BootCamp Windows 8.1 Display flicker early 2015 macbook pro 13

Similar Messages

Maybe you are looking for