Bootcamp windows drivers doesn't download it at the proces !

Hello !
I got this problem :
When i follow the steps of the bootcamp assistant, it asks like you wanna download the windows drivers and stuff,
but when i choose that, it sais not avivable, is there a other way to get the drivers...
( burning on a cd/dvd or something like that, and install it... )
Please help me !!!

This happens often (don't know why.) Just wait a few hours or a day then try again. Be patient.

Similar Messages

When I open a new window, it doesn't attach itself to the bottom toolbar? I'm using XP Pro and Firefox 6.0.2.

It's explained pretty well in my initial question. Not sure what else you would need in the way of details.
I will say it's been going on for a month or so, and it happens every time I start Firefox, and every time I open a new window.

Thank you for taking the time to leave an answer for me, Poochie1. I really appreciate your attempt at helping me.
Unfortunately, as smart as I thought I was when I asked the question, I apparently wasn't that smart, because I didn't explain my problem so you'd know what the heck I was talking about.
I think it's because I'm probably not using the correct terminology. I'll try again.
When I open a new window, it just kind of floats on the screen. Before this new update, I could open a window and it was lined up with the start taskbar located at the bottom of the screen. Sometimes the new window will cover up the taskbar partially, and sometimes completely. I have to move it up and align it with the taskbar. Then, when I open another new window, I have to line that one up with the window underneath it.
I hope that description is better than my first one, and I hope you can make some sense out of it, Poochi (and anyone else who happens by here).
Again, thank you for your help.

Windows Update doesn't download updates

I have new hardware/software with Windows Server 2012 R2 Essentials. After initial setup of hardware/software I tried to get windows update before proceeding to the dashboard and going through all the wizards. I have 60 found updates but it won't download
any of them, even if I only select one of them to install. It just sits at 0% download. I can reach the internet just find. I also verified that both the BITS and Windows Update services are running. Any ideas of things to look at or try would be greatly appreciated.
Thanks in advance!

Hi,
Please refer to Milos’s suggestion and check if help us to find more clues.
à
I have 60 found updates but it won't download any of them, even if I only select one of them to install. It just sits at 0% download.
Just addition. Did you select one update and directly download from Microsoft website, then check if you can
install that update on your server?
Meanwhile, please run
sfc /scannow command to scan all protected system files and use the inbox
Deployment Image Servicing and Management (DISM) tool, then check if can help you.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is there a Window's Media Player download compatible with the INTEL iMacs?

I tried downloading MWP for Mac OSX and the file name was Windows Media.sitx and I couldnt do anything with that. I also tried downloading Windows Media Components for quicktime but it said it wasnt compatible with intel Macs.
Any suggestions?
Thanks
iMac G5 Intel Core Duo, 1.83GHz, 1GB RAM Mac OS X (10.4.6)

Although Microsoft no longer supports it, WMV9 for OSX works on the intel machine, running under Rosetta. That .sitx file you download can be uncompressed with the free Stuffit Expander for intel:
http://www.stuffit.com/mac/expander/universalbeta.html
Or re-download the WM Player as a .bin file from MS directly:
http://www.microsoft.com/mac/downloads.aspx?pid=download&location=/mac/download/ misc/winmp_osx.xml&secid=80&ssid=8&flgnosysreq=True
Alternatively, you can download the Popwire components for intel Mac, which allow WMV files to play in native Quicktime (7.0.4 and below only) or Flip4Mac, which will do the same, although only by running your Quicktime Player in Rosetta, as F4M has not released a universal version as of yet.

Is it possible to prevent Windows Phone 8 users downloading apps from the Store unless thay have been "approved" for installation?

We are currently migrating our mobile workforce from BB and iPad to Windows Phone 8 and will use Windows Intune to "manage" them. Is it possible to prevent these devices from being able to download / install apps that are NOT approved?
We would publish "approved" apps on the Company Portal where necessary
There will be no user-owned devices so there is no issue with rigid enforcement - we wish to stop games etc from being installed / propagated across the estate, which is a huge issue with the current devices
Thanks

This feature will be included with the Enterprise Feature pack (no I don't know when it will be released unfortunately)
http://blogs.windows.com/windows_phone/b/windowsphone/archive/2013/07/10/making-windows-phone-an-even-better-choice-for-business.aspx?utm_source=twitterfeed&utm_medium=twitter

Firefox 8 (Windows 7) no longer downloads anything and the download window is greyed out.

The registry is clean. And no big changes have been made.,

Make sure that you do not use Clear History to clear the <i>Browsing History</i> when you close Firefox.
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.com/kb/Clear+Recent+History
Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
* Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Windows 10 doesn't keep settings of the Synaptic's TouchPad after reboot

A temporary solution here: https://translate.google.ru/translate?hl=ru&sl=ru&tl=en&u=http%3A%2F%2Fanswers.microsoft.com%2Fru-ru%2Fwindows%2Fforum%2Fwindows_10-power%2Fwindows-10-не%2F94075d3c-0e42-48f6-9079-8437d6cf58e1%3Fauth%3D1 It is to install the older Sinaptiсs driver and ban update new version of this driver.We are waiting for an official decision.

Good afternoon!
After upgrading from Windows 8.1 to Windows 10, no longer saved settings Synaptic's touchpad after reboot system.That is, I change the settings of Synaptic's touchpad, but they work only until the system is rebooted. After system reboot the settings are restored again by default.
How do I fix this problem?
Notebook HP ENVY dv6 p. s. some people have the same problem with HP's notebooks: https://translate.google.ru/translate?hl=ru&sl=ru&tl=en&u=http%3A%2F%2Fanswers.microsoft.com%2Fru-ru%2Fwindows%2Fforum%2Fwindows_10-power%2Fwindows-10-не%2F94075d3c-0e42-48f6-9079-8437d6cf58e1%3Fauth%3D1

Bootcamp windows 7 drivers aren't installed (network). How can i get these. currently i can't event access the internet on the windows side, because there aren't the drivers, HELP???

help. windows 7 side doesnt have the network drivers.

brandon945 wrote:
help. windows 7 side doesnt have the network drivers.
You download the Windows drivers using Boot Camp Assistant, on the Mac side (If you have Lion), if you are running Snow Leopard they are on your OSX installation disk.

Bootcamp WIndows 7 x64 and Syncmaster 204b external monitor

Hi,
I didn't see a sub-forum for external monitors so I hope the Firmware forum is ok since this seems like a drivers/graphics card issue issue.
The issue I'm having is that Mac OS crashes randomly when I connect my external Samsung Syncmaster 204b monitor to my Macbook Pro when running Windows 7 x64 under Bootcamp. The external monitor turns yellow and the Macbook LCD turns gray and I'm forced to do a hard-reboot. Windows does detect the monitor and I can see it with it's correct name under Windows Display Properties.
Everything works fine when I run the monitor under Mac OS 10.6.4.
I'm running Windows 7 x64 on a mid-2010 Macbook Pro 13". I have all of the latest updates installed for Windows and am using Bootcamp 3.1.
Has anyone encountered a similar issue or have any ideas how this may be resolved?
Thanks, -Scott
Message was edited by: Scott Cullen

Ok, I think this problem has been resolved, so I'll post the solution in case others with the Samsung Syncmaster 204B have the same problem. The answer was erasing the PRAM by holding Option-Command-P-R at boot up (http://support.apple.com/kb/ht1379).
This is what I think happened:
An update in Windows Update is available for the Syncmaster 204B, but wasn't visible when I first connected the Syncmaster. I wasn't able to see the update until I rebooted with the Syncmaster connected (after several crashes). After seeing the update in Windows Update under 'Optional Updates", called "Samsung - Display- 204T/204Ts/204B, Syncmaster Magic CX20Ts(digital)", I installed it, but bootcamp Windows continued to crash randomly after attaching the Syncmaster via both Mini Display Port-to-DVI and Mini Display Port-to-VGA. Sometimes it crashed after a few minutes, sometimes an hour, the same as before I installed the update.
I was convinced that it was a compatibility problem between Windows 7 x64, the Syncmaster 204B and the MacBook Pro 13" Mid-2010 hardware since this problem only happened when booting into bootcamp Windows 7 x64 (everything worked fine in Mac OS), but now that doesn't seem to be the case. I think the update fixed the problem, but after installing the update some of the of the original incompatible display settings remained resident in the Mac's PRAM. Erasing the PRAM cleared these settings and allowed the new updated settings to be loaded instead, fixing the crash issue.
-Scott

Bootcamp windows 7 x64 Ethernet controller error...

I've installed the Windows 7 x64 drivers, yes I'm aware of how to get around the x64 error. However after installing My internet doesn't work.
Theres a few drivers with error code 28, saying they aren't installed next to them; ethernet controller, network controller. I've ran the repair utility, and it still doesn't install the files.
Any suggestions?

Ok, I think this problem has been resolved, so I'll post the solution in case others with the Samsung Syncmaster 204B have the same problem. The answer was erasing the PRAM by holding Option-Command-P-R at boot up (http://support.apple.com/kb/ht1379).
This is what I think happened:
An update in Windows Update is available for the Syncmaster 204B, but wasn't visible when I first connected the Syncmaster. I wasn't able to see the update until I rebooted with the Syncmaster connected (after several crashes). After seeing the update in Windows Update under 'Optional Updates", called "Samsung - Display- 204T/204Ts/204B, Syncmaster Magic CX20Ts(digital)", I installed it, but bootcamp Windows continued to crash randomly after attaching the Syncmaster via both Mini Display Port-to-DVI and Mini Display Port-to-VGA. Sometimes it crashed after a few minutes, sometimes an hour, the same as before I installed the update.
I was convinced that it was a compatibility problem between Windows 7 x64, the Syncmaster 204B and the MacBook Pro 13" Mid-2010 hardware since this problem only happened when booting into bootcamp Windows 7 x64 (everything worked fine in Mac OS), but now that doesn't seem to be the case. I think the update fixed the problem, but after installing the update some of the of the original incompatible display settings remained resident in the Mac's PRAM. Erasing the PRAM cleared these settings and allowed the new updated settings to be loaded instead, fixing the crash issue.
-Scott

Matrox DualHead2Go DP Edition on MBP (May 2010) under Bootcamp Windows 7?

Will the Matrox DualHead2Go DP Edition be recognized and work under "Bootcamped" Windows 7 running on a Macbook Pro (May 2010)?
On a similar/related note, are there DisplayPort drivers for Windows 7 under Bootcamp to make the miniDP port to be recognized and work under it - even for something else, like the simple miniDP-to-DVI and miniDP-to-VGA adapters (if not for the DualHead2Go)?
Message was edited by: takabanana

Ok, I think this problem has been resolved, so I'll post the solution in case others with the Samsung Syncmaster 204B have the same problem. The answer was erasing the PRAM by holding Option-Command-P-R at boot up (http://support.apple.com/kb/ht1379).
This is what I think happened:
An update in Windows Update is available for the Syncmaster 204B, but wasn't visible when I first connected the Syncmaster. I wasn't able to see the update until I rebooted with the Syncmaster connected (after several crashes). After seeing the update in Windows Update under 'Optional Updates", called "Samsung - Display- 204T/204Ts/204B, Syncmaster Magic CX20Ts(digital)", I installed it, but bootcamp Windows continued to crash randomly after attaching the Syncmaster via both Mini Display Port-to-DVI and Mini Display Port-to-VGA. Sometimes it crashed after a few minutes, sometimes an hour, the same as before I installed the update.
I was convinced that it was a compatibility problem between Windows 7 x64, the Syncmaster 204B and the MacBook Pro 13" Mid-2010 hardware since this problem only happened when booting into bootcamp Windows 7 x64 (everything worked fine in Mac OS), but now that doesn't seem to be the case. I think the update fixed the problem, but after installing the update some of the of the original incompatible display settings remained resident in the Mac's PRAM. Erasing the PRAM cleared these settings and allowed the new updated settings to be loaded instead, fixing the crash issue.
-Scott

Sound Blaster ZX works with no drivers, doesn't work with drivers installed...

Greetings one and all,
I've just built a Windows 8.1 Enterprise system on an Asus Z9PA-D8 with dual processors installed. When any of the sound blaster drivers (CD or downloaded) are installed the card stops working. Uninstall everything, and it works again.
I hope this is some simple configuration issue.
Anybody got any suggestions?

Okay, it was a configuration issue. I ran diagnostics and configured to output to speakers.

I am having problems opening pages in safari. the rotating wheel at the right end of the address window doesn't stop even after the page has filled up. then if i try to open other pages it gets stuck and won't open them.

I started having problems opening pages today. When first open a page it seems to download the page OK, but the rotating wheel on the right-hand end of the address field keeps rotating after the page is completely filled up. Then if I try to open other pages it becomes slower and eventually stops filling-in the pages, while the rotating wheel keeps rotating.
I wonder whether junk is being downloaded into my mac, or what is going on. Help will be geatly appreciated.

When was the last time you emptied the Safari cache?
From your Safari menu bar click Safari > Empty Cache
If that didn't make a difference, go back to the menu bar click Safari > Reset Safari. Select the top 5 boxes then click Reset.
And how much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space. Freeing Up Hard Disk Space - Mac Guides
If emptying cache or resetting didn't help and there's enough free space on the startup disk, login to another user account, launch Safari. Same problems there indicates a system wide problem. Log back into your admin account so you can check the startup disk.
Launch Disk Utility. /Applications/Utilities
Select MacintoshHD in the panel on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks
I wonder whether junk is being downloaded into my mac
Nothing should "download" to your Mac unless you initiate the download yourself. You can check the Downloads folder from the Safari > Window menu or your Downloads folder in the Finder.

I have Windows 7 main library, iMac with additional library and Apple TV that I want to use home sharing, but windows library doesn't show as a computer on Apple TV.

I have music and movie library on an external drive connected to a Windows 7 machine. I also have home movies and other content on an iMac that I use. I want to turn on home sharing for both and connect them to Apple TV for display, music and podcast. They are all on the same wifi home network, but the Windows library doesn't show up on the ATV device.
I turned off all Windows firewall and I tried to configure port forwarding, but that didn't help.
I will say that this did work at some point, so a patch or an update, or some configuration change has caused it to stop workin at some point in the past six months to a year.

Hello, aquilinofromtuckahoe.
Here is the best resource for troubleshooting steps when experiencing issues with Home Sharing.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Regards,
Jason H.

Can new windows drivers be installed without updating to leopard?

I was wondering if the new windows drivers on the leopard install disc can be installed in windows without upgrading tiger on the other partition?
I want to upgrade tiger to leopard but want to wait till i have more time to complete the process, but i do want to check out the new windows drivers now.

How would you extract the drivers from the Leopard disk?
Normally, you create/install the Boot Camp assistant, which extracts the drivers.
Anyone with Leopard installed can always supply anyone else with a new drivers disk, and, I would expect in time that the Windows system itself would be capable of obtaining the drivers. After all the main problem is that manufacturers have not yet written drivers for Windows on a Mac. Once the Mac hardware becomes "standard" there should be no problem using Windows update directly to get new drivers.
This is what I am expecting to happen with my 64-bit Vista install on this box.

Bootcamp windows drivers doesn't download it at the proces !

Similar Messages

Maybe you are looking for