BootCamp won't boot with USB-drive connected

Hi everyone,
since I installed my BootCamp partition I encounter a strange problem. I have an LG external DVD-drive connected via USB to my iMac. Everytime I try to boot Windows while the LG is connected the boot process just stops and gives me a white display. If I unplug the drive from the USB-Port everything works fine, and once windows is booted I can even reconnect the USB-drive and it works fine. But as you might understand always unplugging and plugging really gets to my nerves. I know of a couple friends who encounter the exact same problem, they also complain about this...
Also strange is the fact, that if I boot OSX the LG is connected and everything works fine...
Searched the forum and web, and wasn't able to find something usefull...
I hope there is somebody here who can help me...
Thanks in advance...
Legolas

I think your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
BTW, you might enjoy these DiskWarrior review/recommendations...
http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925

Similar Messages

MSI P43 won't boot with usb devices connected

My system:
MSI P43 Neo
Intel Core 2 Duo E8400
NorthQ Black Magic 850 watt PSU
Corsair 4 x 2GB ram PC2-8500 1066MHz
Seagate 320 GB hd
Hitachi 1 TB hd
Samsung 1.5 TB hd
Club3D Nvidia GTX275 1,75 GB
Samsung DVD Write Master
When i try to boot i freezes at the detecting usb devices when i have a usb device connected. It does with any usb device. But when i boot up without any usb devices connected then i boot fine and i can connect the devices right after the detection of usb devices. How can that be?

Googled on "computer not booting with usb code 6b38" and found this:
Quote
****SLOW BOOT-UP in POST SCREEN****
P.S. If you see the BIOS code 6B38 in the bottom right corner of the screen, this is a indication that USB Legancy support is enabled in the BIOS. If this is enabled and you have any usb devices attached such as a external USB Hard drive, your system will take ages to go through the POST boot screens.
So disable this setting in the BIOS and the system will then boot in a matter of Seconds
From:
http://www.rebelshavenforum.com/sis-bin/ultimatebb.cgi?ubb=get_topic;f=30;t=000250
Also try and see if a clear CMOS will help, some people suggested that from a old post from MSI forum here, saying its bios 1.3 thats bugged.
So if disabling doesnt work, perhaps down/upgrading BIOS might.

Windows Won't Boot With USB Drives Attached

I just installed Windows 7 on my Mac mini but it won't boot into Windows automatically if there are USB drives attached. I have to hold down the option key at boot time and select the Windows partition manually for it to boot, unless I remove the USB drives first, then it will boot into Windows on its own. Does anyone know how to fix this annoying problem?

Sounds like your mini is set to boot order: boot from USB first.
On a PC you could go into BIOS and change boot order and enable/disable USB booting.
Not sure why or what is on the USB bus, type of drive and device that could also make a difference (and not be universal to the Mini)

IMac Won't Boot With USB Keyboard Connected

We have a suite of 10 iMacs (10,1 - 21.5 inch), but one of them will not boot and has issues coming out of sleep while a USB keyboard is plugged in.
Have tried swapping the keyboard with another iMac - the other iMac still boots but the problem iMac continues to play up.
Tried plugging the mouse into the iMac's USB instead of the keyboard's.
Tried SMC reset, PRAM reset.
Re - imaged the machine from a time machine backup of one of the other iMacs, which made the issue go away for about a month... but then it returned.
Using a magic keyboard is fine as a workaround, but the users need the number pad, and if possible I'd rather fix the issue than buy a clunky separate keypad.
Does anyone have any ideas? Any help would be very appreciated!

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

Mac G4 won't boot with slave drive connected

I have two G4 boxes. 1-Dual 867 Leopard and 1 -Dual 1.25 Tiger.
I have been trying to clone the system drive of the Dual 867. Everytime I add the second drive to the 867 box and try to boot i get the "Flashing ?." I have tried various reformatted drives and the result is the same. I have even tried to accomplish this by using the 1.25 box. Same result.
if i unhook the 2nd drive (ie backup drive) both computers will boot as usual.
What is the problem?

Hi larbok, and a warm welcome to the forums!
I think it's the Jumper settings on the Hard drive.
Older G4s should be set to Master on the end cable & Slave for the Middle of the cable.
MDD usually use the Cable Select jumper settings on both drives.
Jumper settings are generally shown on the HDs themselves.

Won't boot with external display connected

My MacBook Pro (circa 1997) won't boot with the external display connected. I can connect the external display (20in flat planel) after it has started, and it works just fine.
I have tried two different DVI cables (one of which I think is a DVI-A cable) and the DVI-to-VGA cable. The result is the same.
During the boot phase I get the tone, the apple logo and the progress wheel. After 30 seconds to one minute those disappear to be replaced by an empty blue screen.

In case anyone wonders, my "solution" was to change to a WB Elements Desktop 3TB (only USB 2.0 is currently available for this model). I miss the speed of USB 3.0, but it's much nicer to not have to remember to unplug and plug in the hard drive each time I boot.
Still hoping to see a proper solution to this (since I don't have the WB My Book anymore, I can't test adaher's suggestion).

Time Capsule Hangs with USB Drive Connected after installing 10.5.6 update

The 10.5.6 update basically made my External USB Disk connected to the Time Capsule unusable. I've repaired the permissions as suggested in other posts - this did not fix the problem.
I was unable to perform any incremental backups initially after the 10.5.6 update, so I archived my sparsebundle and created a new one by doing a full fresh backup - which completed successfully. However, after the backup, I was unable to connect to the Time Capsule or the USB drive connected to the Time Capsule via Finder - when trying to connect, my computer hangs and I'm forced to do a hard restart of BOTH my computer AND the Time Capsule, if I just restart one or the other the problem persists. If I let the connection attempt run long enough I get an "Error Code: -8072" message and still have to do a hard restart. After the hard restart of my computer and Time Capsule I'm able to connect to the Time Capsule and the USB drive connected to Time Capsule just fine. However, once the Time Machine backup runs again - the same problem returns, I can no longer access the Time Capsule or the USB drive connected to Time Capsule via Finder and have to do a hard restart of BOTH my computer AND Time Capsule. This 10.5.6 update has been havoc, anyone have the same troubles or ideas for resolving this? Before updating to 10.5.6 my system was working flawlessly with Time Capsule and the connected USB drive.
UPDATE: I've just verified that this problem only occurs with my external LaCie Hard Drive connected to Time Capsule via USB. If I disconnect my LaCie Hard Drive from the Time Capsule and restart the Time Capsule everything works fine (backups, access to Time Capsule Disk from Finder). If I connect the LaCie Hard Drive via USB to the Time Capsule, I am able to access the LaCie Hard Drive in Finder UNTIL the next Time Machine backup. After the first Time Machine backup with the USB drive connected, I can no longer access the USB drive from Finder - Finder hangs and eventually produces "Error Code: -8072". If I disconnect the USB drive, then plug it back in - Finder no longer hangs and I can access the drive connected to Time Capsule until the next backup occurs.
Anybody have ANY ideas? This worked fine before the 10.5.6 update!

I am having a similar problem. Never tried it before installing 10.5.6, but have a Time Capsule (500GB) with a 1TB WD MyBook Essential Edition connected via USB. Hardware is password protected by authorized users of network and needs separate login to access. When I initially set it up, it worked fine (though too difficult to set up). The WD storage drive showed up in Finder window as a subset of the Time Capsule after clicking on the Time Capsule icon. I had an "-8072" error message yesterday that I ignored, but then the file contents of the WD storage drive took forever to be viewed in Finder (though video files could be accessed wirelessly). Today started having a problem... coincidentally?... after a Time Machine backup, and got the message: "The operation could not be completed. An unexpected error occurred (error code -8072)." Now I am unable to get into the WD drive when I click on "Connect As" on the Time Capsule icon in the Finder menu... I just get the -8072 error. I no longer even see the Time Capsule disk as a subset of the Time Capsule icon in the Finder Toolbar.
What is going on???

IMAC won't boot with USB card reader attached

My quite new 24" iMAC won't boot if I have a USB card reader attached:
I get to the white screen with the apple logo, but it gets stuck there and the little spinning gear below the apple logo never appears (I've waited several minutes). (In all my test cases, there is no card in the card reader.)
I've tried two different card readers with the same results ("iDOTconnect" brand and a brand new Apacer unit, both are USB2.0 multi-format card readers).
The 1st one I tried via a USB hub, the second one I tried via a new hub and also directly connected to the mac (both of those hubs work fine).
Anyone have any ideas?
Regards,
Strathglass
Message was edited by: strathglass

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

My Macbook Won't boot from USB drives

Alright. Seems that ever since I've upgraded to Mountain Lion, I keep having one problem after the next. It's probably my fault, but I've been doing nothing I would think to be wrong...
Anyway. Here's a breif history. I have a Macbook pro. Before I installed Mountain Lion, I had Snow Leopard installed with Windows 7 on BootCamp. I installed Mountain Lion and made a startup USB for it as well. I used that USB as a startup drive so I could shrink my OS X installation partition on my HD so I could make a third partition since I am running out of room on my Windows Partition for games. It suceeded, I partitioned the remaining space on the drive as an ExFAT, and restarted. I tried to load up Windows, nothing would boot. I then loaded up my OS X partition just fine. No issues there. Figured something with the partition messedup the Windows install. So I decided to reinstall Windows. Nope, the Windows install USB won't boot. Okay... Maybe if I delete that extra partition I made, things will work. Nope, won't boot the Mountain Lion start up USB now. And for some stupid reason I cannot resize the partitions using the Mountain Lion startup partition on the HD.
So, what did I break that made it so only OS X will start up and no other bootable drives?

Week 2, this problem still occuring. Would be nice if this support forum actually offered support...

IMac won't boot with external drives attached

I am using iMac 27" Late 2013 model upgraded to mavericks 10.9.4. Two external drives are always attached with it, one is segate 3.5" 2TB USB 3.0 drive and another one is 2.5" usb 2.0 drive.
when i start my imac with external drives attached it won't boot up. Stuck at plain white screen after a startup chime, not even any apple logo or any progress circle appears. And i have to detach all of my drives to make it boot.
This problem arises after upgrading to mavericks. Already tried resetting PRAM, SMC and checked Startup disk and verify disk with disk utility.

Raja,
Do a SMC reset perhaps even a couple of times and see if that helps. Also in System Preferences + Startup Disk make sure the internal HD is selected.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Roger

MBP won't boot recovery USB drive, need help

HDD failed on 15" mid2009 MacBook Pro, purchased a Seagate 1TB hybrid drive (SSHD) to replace it with. Went to boot to USB recovery drive with OS X 10.8 using option/alt on boot and would only get the folder with flashing question mark. Tried command+R also. Tried different USB ports. Tried with HDD pulled out. The USB recovery drive does work because we were able to boot to it from a different MBP, and verified the files on it with Disk Utility. Just can't get any kind of recovery options or anything on this Mac with replaced HDD. Need help. Never encountered anything like this, can't find anything like it online, and none of my coworkers can figure it out. We've all been working comps for yrs, one even an ex apple-tech. Thanks for any suggestions!!

Sorry - missed that part about having used both USB ports...
Since you've verified that the USB thumb drive works on another Mac, and that it won't boot whilst holding down the option key, I would advise taking your machine to an Apple Store or an AASP to have them diagnose your machine (which will be free). They, too, should have USB sticks that they can use to test the machine.
Good luck,
Clinton

Brandnew Lenovo M93 won't boot with USB device plugged in...

Since last week i got the Lenovo M93 with Intel i7-4770 CPU @ 3,40GHz. With 8 GB on board it's a real great machine!
The only thing i notice is when I boot the machine, it hangs on the opening screen, which says 'Lenovo'. Only after I remove all (2) USB connected HD's it advances and starts booting Windows. At that time i can reconnect the HD's
What can be the problem? The only 2 devices are external HD's which worked well on my 6 year old HP machine. One of them has an external powersupply.

lugies wrote:
I restored to Windows 8 from the Lenovo disks, then upgraded to 8.1. I'm booting from UEFI bios, the external is 3TB and is MBR, which is the way it came from the store. Do you think it could be because its MBR partition style?I don't know how a hard drive of greater than 2TB cannot be GPT. At least that's what it is supposed to be. MBR is for 2TB or less. If it came from the factory as MBR, that sounds wrong to me. Unless only 2TB is "visible". All the reports on this forum (in a number of separate threads) about this same problem all talk about (1) Windows 8/8.1, (2) UEFI BIOS, and (3) external drives larger than 2TB. In my own "problem-free" case, it is (1) Windows 7, (2) legacy BIOS, and (2) external drive of 2TB. I'm not denying that there would seem to be a Lenovo problem in the UEFI BIOS, but getting a 3TB drive that's partitioned as MBR sounds wrong. How about if you just delete all partitions on it, and recreate new partitions... with GPT. Use Partition Wizard. Does it make any difference? Or can you still not boot successfully with the USB drive plugged in?

Mac Mini Won't Boot with VGA Monitor Connected

I have a new Mac Mini connected to an older VGA monitor using the Apple brand VGA adapter. The mini is fully up to date and runs perfectly when booted. However, if I reboot the mini with the VGA monitor connected, it fails to boot. I just hear the faint chime sound every other second. There is no output to the monitor and the only way I can get it to boot is to disconnect the monitor and then power cycle the mini. I can reconnect the monitor just seconds after powering back on and it finishes booting properly.
Anyone else experience this? It is very frustrating. I've also tested with an HDMI connected monitor (without the VGA adapter) and it boots just fine and the display works properly.
Thanks!

Okay, I'm back with good news: I have found two remedies for the problem which will hopefully solve it for you as well.
Given that the issue only occurs when certain monitors are connected, I concluded that the root of it must be a bug in the Mac's firmware related to DDC (Display Data Channel) handling, and that the most promising way to address it should be to just disable the DDC.
Workaround #1: If your monitor has BNC connectors, use a VGA to BNC cable.
In this configuration the DDC pins are not connected to the monitor at all. This did indeed fix the problem - my Mac mini booted without a problem with the monitor connected. However, I was not completely satisfied with this solution, because VGA to BNC cables are usually quite heavy and inflexible, and do no go together well with Apple's MDP to VGA adapter and the Mini Displayport/Thunderbolt port which has no locking mechanism.
Workaround #2: Remove pin 12 of the VGA plug.
Pin 12 of the VGA plug connects the serial data line of the DDC. Pulling out this pin with a pair of needle nose pliers will effectively disable DDC. I hesitated to do this to my cable (a direct MDP to VGA cable which eliminates the need for a separate adapter dangling from the Mac) and therefore bought a tiny VGA male to female adapter (also called port saver, e.g. Delock 65250) to perform the surgery on that. This has done the trick and my Mac mini has started up fine ever since.
Of course, without DDC the Mac won't know the model name and capabilities of the attached monitor and thus offer some resolution and frequency settings which the monitor may not support, but that's a small drawback compared to having to pull out the monitor cable everytime you turn on or restart your Mac.

System won't boot when eSata drive connected

I have an eSata SSD drive connected for fast foto-editing.
The system halts at the bios/Toshiba screen.
Disconnecting and rebooting and recoonection the SSD drive after the bios screen has passed works.
How can I make the bios to continue, with the eSata SSD drive (intel 80GB X25) connected.
The drive is conencted by eSata port AND uses a USB port for power.
(The drive is contained in an NexStar-3 casing)
Kenneth Tan Photography

Forgot to mention: it's a Toshiba Qosmio X500-10T
Kenneth Tan Photography

Windows 7 won't boot with HFS drive attached

I installed Windows 7 onto my 2011 Mac Mini. For some reason, when I try to boot Windows with my 2.5TB HFS+ external USB drive attached, I just get a black screen, I don't even see the Windows splash screen/logo.
If I remove said drive, Windows boots fine.
Also, if the drive is attached after Windows boots, when I click the Boot Camp icon and choose "Restart in Mac OS X" I get the error "Could not locate the Mac OS X boot volume". Again, if the drive is unplugged, I can use the Boot Camp icon to restart in OS X just fine.
Any idea what's going on?

maybe the 2.2TB issue afftects it, or the drive enclosure even.
And maybe if it was just 2.1TB it would work.
Even Lion had some surprises for customers with USB device drives.

BootCamp won't boot with USB-drive connected

Similar Messages

Maybe you are looking for