Booting freeze when starting setup virtual console
Sometimes the computer will freeze when booting into
Started setup virtual console
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
Thanks.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.5-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jul 10 07:10:15 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000376b0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000376b1000-0x00000000376b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000376b7000-0x00000000377b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000377ba000-0x000000003780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003780f000-0x0000000037907fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037908000-0x0000000037b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b0f000-0x0000000037b17fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b18000-0x0000000037b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b1f000-0x0000000037b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b63000-0x0000000037b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037b9f000-0x0000000037bdffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037be0000-0x0000000037bfcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037bfd000-0x0000000037bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037c00000-0x0000000037dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000038000000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO 2847A65/2847A65, BIOS 6JET85WW (1.43 ) 12/24/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37c00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 038000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask FC0000000 write-back
[ 0.000000] 3 base 037E00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f74c0-0x000f74cf] mapped at [c00f74c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x376b0fff]
[ 0.000000] [mem 0x37400000-0x376b0fff] page 4k
[ 0.000000] BRK [0x0179e000, 0x0179efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x376b7000-0x377b9fff]
[ 0.000000] [mem 0x376b7000-0x377b9fff] page 4k
[ 0.000000] RAMDISK: [mem 0x36ac0000-0x36dfcfff]
[ 0.000000] ACPI: RSDP 0x000F7190 000024 (v04 PTLTD )
[ 0.000000] ACPI: XSDT 0x37BF2BBD 000064 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: FACP 0x37BE4000 0000F4 (v03 LENOVO TP-6J 00001430 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x37BE5000 00A14B (v02 LENOVO TP-6J 00001430 INTL 20050624)
[ 0.000000] ACPI: FACS 0x37B9EFC0 000040
[ 0.000000] ACPI: HPET 0x37BFCEFC 000038 (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x37BFCF34 00003C (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x37BFCF70 000068 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x37BFCFD8 000028 (v01 LENOVO TP-6J 00001430 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x37BE3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE2000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE1000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377ba000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x37bfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x376b0fff]
[ 0.000000] node 0: [mem 0x376b7000-0x377b9fff]
[ 0.000000] node 0: [mem 0x3780f000-0x37907fff]
[ 0.000000] node 0: [mem 0x37b0f000-0x37b17fff]
[ 0.000000] node 0: [mem 0x37b1f000-0x37b62fff]
[ 0.000000] node 0: [mem 0x37b9f000-0x37bdffff]
[ 0.000000] node 0: [mem 0x37bfd000-0x37bfffff]
[ 0.000000] On node 0 totalpages: 227548
[ 0.000000] free_area_init_node: node 0, pgdat c1601e00, node_mem_map f6fb9020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223156 pages, LIFO batch:31
[ 0.000000] HighMem zone: 9 pages used for memmap
[ 0.000000] HighMem zone: 394 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x38000000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x376b1000-0x376b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x377ba000-0x3780efff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7798000 s33856 r0 d23488 u57344
[ 0.000000] pcpu-alloc: s33856 r0 d23488 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225772
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3bfa8024-2f62-4818-9393-5874bfc69f25 rw
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 1826808 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037c00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 889132K/910192K available (4447K kernel code, 481K rwdata, 1288K rodata, 564K init, 956K bss, 21060K reserved, 1576K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1616000 - 0xc16a3000 ( 564 kB)
.data : 0xc14582aa - 0xc1614400 (1776 kB)
.text : 0xc1000000 - 0xc14582aa (4448 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.872 MHz processor
[ 0.003345] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.31 BogoMIPS (lpj=6982906)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.003355] ACPI: Core revision 20140214
[ 0.019690] ACPI: All ACPI Tables successfully acquired
[ 0.020050] Security Framework initialized
[ 0.020059] Yama: becoming mindful.
[ 0.020075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020299] Initializing cgroup subsys memory
[ 0.020305] Initializing cgroup subsys devices
[ 0.020307] Initializing cgroup subsys freezer
[ 0.020309] Initializing cgroup subsys net_cls
[ 0.020313] Initializing cgroup subsys blkio
[ 0.020338] CPU: Physical Processor ID: 0
[ 0.020339] CPU: Processor Core ID: 0
[ 0.020342] mce: CPU supports 6 MCE banks
[ 0.020351] CPU0: Thermal monitoring enabled (TM1)
[ 0.020359] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.020459] Freeing SMP alternatives memory: 16K (c16a3000 - c16a7000)
[ 0.021230] ftrace: allocating 19105 entries in 38 pages
[ 0.026774] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061993] smpboot: CPU0: Intel Celeron(R) Dual-Core CPU T3500 @ 2.10GHz (fam: 06, model: 17, stepping: 0a)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076738] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083404] CPU 1 irqstacks, hard=f6516000 soft=f6518000
[ 0.083406] x86: Booting SMP configuration:
[ 0.083408] .... node #0, CPUs: #1
[ 0.006666] Initializing CPU#1
[ 0.096574] x86: Booted up 1 node, 2 CPUs
[ 0.096579] smpboot: Total of 2 processors activated (8382.63 BogoMIPS)
[ 0.096809] devtmpfs: initialized
[ 0.096921] PM: Registering ACPI NVS region [mem 0x37b63000-0x37b9efff] (245760 bytes)
[ 0.097916] pinctrl core: initialized pinctrl subsystem
[ 0.097971] RTC time: 21:12:51, date: 07/24/14
[ 0.098030] NET: Registered protocol family 16
[ 0.098149] cpuidle: using governor ladder
[ 0.098151] cpuidle: using governor menu
[ 0.098199] ACPI: bus type PCI registered
[ 0.098202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098297] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098300] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.098302] PCI: Using MMCONFIG for extended config space
[ 0.098303] PCI: Using configuration type 1 for base access
[ 0.098392] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.098393] mtrr: probably your BIOS does not setup all CPUs.
[ 0.098395] mtrr: corrected configuration.
[ 0.100073] ACPI: Added _OSI(Module Device)
[ 0.100073] ACPI: Added _OSI(Processor Device)
[ 0.100073] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100073] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107026] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107995] ACPI: SSDT 0x37B18620 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.108621] ACPI: Dynamic OEM Table Load:
[ 0.108624] ACPI: SSDT 0x00000000 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.116947] ACPI: SSDT 0x37B19F20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.117393] ACPI: Dynamic OEM Table Load:
[ 0.117395] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.130189] ACPI: Interpreter enabled
[ 0.130202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.130208] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.130226] ACPI: (supports S0 S3 S4 S5)
[ 0.130228] ACPI: Using IOAPIC for interrupt routing
[ 0.130267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.144307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.144315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.144322] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.145146] PCI host bridge to bus 0000:00
[ 0.145151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145153] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.145156] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.145158] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.145161] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.145163] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.145166] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.145168] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[ 0.145181] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.145206] DMAR: Forcing write-buffer flush capability
[ 0.145208] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.145311] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.145327] pci 0000:00:02.0: reg 0x10: [mem 0xf2400000-0xf27fffff 64bit]
[ 0.145336] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.145343] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.145462] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.145475] pci 0000:00:02.1: reg 0x10: [mem 0xf2100000-0xf21fffff 64bit]
[ 0.145642] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.145703] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
[ 0.145829] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.145893] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.145953] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
[ 0.146079] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.146141] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f]
[ 0.146201] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.146201] pci 0000:00:1a.7: reg 0x10: [mem 0xf2a04000-0xf2a043ff]
[ 0.146201] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.146201] pci 0000:00:1b.0: reg 0x10: [mem 0xf2a00000-0xf2a03fff 64bit]
[ 0.146201] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f]
[ 0.146201] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf]
[ 0.146201] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.146201] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.146266] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.146294] pci 0000:00:1d.7: reg 0x10: [mem 0xf2a04400-0xf2a047ff]
[ 0.146416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.146489] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.146551] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.146682] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.146745] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.146992] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
[ 0.147016] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.147028] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.147040] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.147053] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.147065] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
[ 0.147077] pci 0000:00:1f.2: reg 0x24: [io 0x1810-0x181f]
[ 0.147093] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.147095] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.147098] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.147100] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.147232] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.147255] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.147286] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.147516] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[ 0.147544] pci 0000:02:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
[ 0.147763] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.147840] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[ 0.147866] pci 0000:02:00.2: reg 0x10: [mem 0xf2300400-0xf23004ff]
[ 0.148142] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[ 0.148168] pci 0000:02:00.3: reg 0x10: [mem 0xf2300800-0xf23008ff]
[ 0.148441] pci 0000:02:00.4: [197b:2384] type 00 class 0x088000
[ 0.148466] pci 0000:02:00.4: reg 0x10: [mem 0xf2300c00-0xf2300cff]
[ 0.156695] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.156703] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.156802] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.156907] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.157034] pci 0000:05:00.0: [10ec:8172] type 00 class 0x028000
[ 0.157059] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.157076] pci 0000:05:00.0: reg 0x14: [mem 0xf2200000-0xf2203fff]
[ 0.157243] pci 0000:05:00.0: supports D1 D2
[ 0.157245] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.157285] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.166686] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.166691] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.166697] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.166813] acpiphp: Slot [1] registered
[ 0.166820] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.166826] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.166831] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.166839] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.167015] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[ 0.167081] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.167195] pci 0000:08:00.0: reg 0x18: [mem 0xf2010000-0xf2010fff 64bit pref]
[ 0.167267] pci 0000:08:00.0: reg 0x20: [mem 0xf2000000-0xf200ffff 64bit pref]
[ 0.167309] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.167631] pci 0000:08:00.0: supports D1 D2
[ 0.167633] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167765] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.167881] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.167886] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.167897] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.168016] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.168030] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.168033] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.168036] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.168038] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.168041] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.168043] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.168045] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.168116] pci_bus 0000:00: on NUMA node 0
[ 0.168358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168428] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.168494] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168563] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.168695] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168761] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168827] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.173479] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.173591] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173669] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173669] vgaarb: loaded
[ 0.173669] vgaarb: bridge control possible 0000:00:02.0
[ 0.173669] PCI: Using ACPI for IRQ routing
[ 0.185061] PCI: pci_cache_line_size set to 64 bytes
[ 0.185173] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.185176] e820: reserve RAM buffer [mem 0x376b1000-0x37ffffff]
[ 0.185179] e820: reserve RAM buffer [mem 0x377ba000-0x37ffffff]
[ 0.185182] e820: reserve RAM buffer [mem 0x37908000-0x37ffffff]
[ 0.185184] e820: reserve RAM buffer [mem 0x37b18000-0x37ffffff]
[ 0.185187] e820: reserve RAM buffer [mem 0x37b63000-0x37ffffff]
[ 0.185189] e820: reserve RAM buffer [mem 0x37be0000-0x37ffffff]
[ 0.185191] e820: reserve RAM buffer [mem 0x37c00000-0x37ffffff]
[ 0.185330] NetLabel: Initializing
[ 0.185332] NetLabel: domain hash size = 128
[ 0.185334] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185348] NetLabel: unlabeled traffic allowed by default
[ 0.185378] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.185385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.185390] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.186692] Switched to clocksource hpet
[ 0.194447] pnp: PnP ACPI init
[ 0.194476] ACPI: bus type PNP registered
[ 0.194565] pnp 00:00: [dma 4]
[ 0.194604] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.194647] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.194818] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.194823] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.194877] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.194964] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.194967] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.194970] system 00:04: [io 0xffff] has been reserved
[ 0.194972] system 00:04: [io 0xffff] has been reserved
[ 0.194975] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.194978] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.194981] system 00:04: [io 0x1600-0x16fe] has been reserved
[ 0.194983] system 00:04: [io 0xfe00] has been reserved
[ 0.194986] system 00:04: [io 0x0700-0x070f] has been reserved
[ 0.194990] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195039] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195106] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.195153] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[ 0.195390] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.195393] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.195396] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.195399] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.195402] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.195405] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195407] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.195411] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195901] pnp: PnP ACPI: found 9 devices
[ 0.195903] ACPI: bus type PNP unregistered
[ 0.233524] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.233530] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.233542] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.233546] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.233549] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.233561] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.233564] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.233567] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.233579] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.233599] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 400000
[ 0.233618] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233621] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233624] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233627] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233630] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233632] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233635] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.233638] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233641] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233643] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233651] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233656] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.233660] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233664] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.233668] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233672] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233676] pci 0000:00:1c.5: BAR 14: assigned [mem 0x40c00000-0x410fffff]
[ 0.233680] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.233683] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.233687] pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.233691] pci 0000:00:1f.3: BAR 0: assigned [mem 0x41100000-0x411000ff 64bit]
[ 0.233705] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.233709] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.233716] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.233721] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233729] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.233732] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.233739] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
[ 0.233744] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233752] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.233756] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.233763] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
[ 0.233768] pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233776] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.233779] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.233786] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.233791] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233799] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.233803] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.233809] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.233814] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233823] pci 0000:08:00.0: BAR 6: assigned [mem 0xf2020000-0xf203ffff pref]
[ 0.233826] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.233830] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.233836] pci 0000:00:1c.5: bridge window [mem 0x40c00000-0x410fffff]
[ 0.233841] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233849] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.233864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.233867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.233870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233872] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233874] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233877] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233879] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233882] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.233884] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
[ 0.233887] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233890] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.233892] pci_bus 0000:03: resource 1 [mem 0x40200000-0x403fffff]
[ 0.233895] pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233897] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.233900] pci_bus 0000:04: resource 1 [mem 0x40600000-0x407fffff]
[ 0.233902] pci_bus 0000:04: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233905] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.233907] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.233910] pci_bus 0000:05: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233912] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.233915] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.233917] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233920] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.233922] pci_bus 0000:08: resource 1 [mem 0x40c00000-0x410fffff]
[ 0.233924] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233927] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.233929] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.233932] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233934] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233937] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233939] pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233941] pci_bus 0000:09: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233974] NET: Registered protocol family 2
[ 0.234147] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.234165] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234196] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.234229] TCP: reno registered
[ 0.234232] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234288] NET: Registered protocol family 1
[ 0.234306] pci 0000:00:02.0: Boot video device
[ 0.247385] PCI: CLS 64 bytes, default 64
[ 0.247444] Unpacking initramfs...
[ 0.327321] Freeing initrd memory: 3316K (f6ac0000 - f6dfd000)
[ 0.327360] Simple Boot Flag at 0x36 set to 0x1
[ 0.327537] apm: BIOS not found.
[ 0.327589] Scanning for low memory corruption every 60 seconds
[ 0.328006] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342512] bounce pool size: 64 pages
[ 0.342526] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344771] zbud: loaded
[ 0.344889] VFS: Disk quotas dquot_6.5.2
[ 0.344943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.345132] msgmni has been set to 1740
[ 0.345203] Key type big_key registered
[ 0.345390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.345431] io scheduler noop registered
[ 0.345433] io scheduler deadline registered
[ 0.345477] io scheduler cfq registered (default)
[ 0.345722] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.345914] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.346095] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.346276] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.346459] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.346643] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.346801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.346826] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.346866] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.346868] vesafb: scrolling: redraw
[ 0.346870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.347265] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.371347] Console: switching to colour frame buffer device 128x48
[ 0.395282] fb0: VESA VGA frame buffer device
[ 0.395302] intel_idle: does not run on family 6 model 23
[ 0.395336] GHES: HEST is not enabled!
[ 0.395353] isapnp: Scanning for PnP cards...
[ 0.708652] isapnp: No Plug & Play device found
[ 0.708714] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.709479] rtc_cmos 00:05: RTC can wake from S4
[ 0.709659] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.709696] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.709734] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.709873] TCP: cubic registered
[ 0.710038] NET: Registered protocol family 10
[ 0.710291] NET: Registered protocol family 17
[ 0.710470] Using IPI No-Shortcut mode
[ 0.710614] registered taskstats version 1
[ 0.711361] Magic number: 6:207:248
[ 0.711441] rtc_cmos 00:05: setting system clock to 2014-07-24 21:12:51 UTC (1406236371)
[ 0.711573] PM: Hibernation image not present or could not be loaded.
[ 0.711816] Freeing unused kernel memory: 564K (c1616000 - c16a3000)
[ 0.711835] Write protecting the kernel text: 4452k
[ 0.711865] Write protecting the kernel read-only data: 1292k
[ 0.720349] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.722097] systemd-udevd[47]: starting version 215
[ 0.747046] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.754102] ACPI: bus type USB registered
[ 0.754142] usbcore: registered new interface driver usbfs
[ 0.754158] usbcore: registered new interface driver hub
[ 0.757660] usbcore: registered new device driver usb
[ 0.757853] sdhci: Secure Digital Host Controller Interface driver
[ 0.757856] sdhci: Copyright(c) Pierre Ossman
[ 0.758255] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 20)
[ 0.758310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.758388] mmc0: no vqmmc regulator found
[ 0.758390] mmc0: no vmmc regulator found
[ 0.758524] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.758563] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 20)
[ 0.758628] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 0.758728] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.758864] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.758874] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.758884] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.758909] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.759248] ehci-pci: EHCI PCI platform driver
[ 0.760108] hub 1-0:1.0: USB hub found
[ 0.760122] hub 1-0:1.0: 2 ports detected
[ 0.760528] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.760536] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.760554] ehci-pci 0000:00:1a.7: debug port 1
[ 0.760989] i8042: Detected active multiplexing controller, rev 1.1
[ 0.764322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.764375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.764416] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.764455] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.764469] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.764487] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf2a04000
[ 0.764496] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.769729] SCSI subsystem initialized
[ 0.771540] libata version 3.00 loaded.
[ 0.773372] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.773646] hub 2-0:1.0: USB hub found
[ 0.773657] hub 2-0:1.0: 6 ports detected
[ 0.796797] hub 1-0:1.0: USB hub found
[ 0.796811] hub 1-0:1.0: 2 ports detected
[ 0.797077] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.797086] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.797104] ehci-pci 0000:00:1d.7: debug port 1
[ 0.801001] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.801026] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2a04400
[ 0.810017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.810266] hub 3-0:1.0: USB hub found
[ 0.810277] hub 3-0:1.0: 6 ports detected
[ 0.810637] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.810645] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.810654] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.810690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.810912] hub 4-0:1.0: USB hub found
[ 0.810922] hub 4-0:1.0: 2 ports detected
[ 0.811160] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.811169] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.811178] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.811202] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.811580] hub 5-0:1.0: USB hub found
[ 0.811590] hub 5-0:1.0: 2 ports detected
[ 0.811840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.811847] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.811857] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.811879] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.812130] hub 6-0:1.0: USB hub found
[ 0.812140] hub 6-0:1.0: 2 ports detected
[ 0.812412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.812422] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.812431] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.812458] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.812718] hub 7-0:1.0: USB hub found
[ 0.812728] hub 7-0:1.0: 2 ports detected
[ 0.813015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.813023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.813033] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.813072] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.813371] hub 8-0:1.0: USB hub found
[ 0.813381] hub 8-0:1.0: 2 ports detected
[ 0.813569] ata_piix 0000:00:1f.2: version 2.13
[ 0.813680] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.816969] scsi0 : ata_piix
[ 0.817145] scsi1 : ata_piix
[ 0.817232] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 0.817238] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 0.842971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.116709] usb 3-6: new high-speed USB device number 2 using ehci-pci
[ 1.290069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.290196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.297007] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0A, SB31, max UDMA/100
[ 1.297157] ata1.00: ATA-8: WDC WD2500BEVT-08A23T1, 02.01A02, max UDMA/133
[ 1.297160] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.310274] ata2.00: configured for UDMA/100
[ 1.310518] ata1.00: configured for UDMA/133
[ 1.310653] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 02.0 PQ: 0 ANSI: 5
[ 1.314042] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A0A SB31 PQ: 0 ANSI: 5
[ 1.330035] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[ 1.330632] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.330736] sd 0:0:0:0: [sda] Write Protect is off
[ 1.330740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.330778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.339509] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.339512] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.339697] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.410766] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.411402] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.330087] Switched to clocksource tsc
[ 2.977672] random: nonblocking pool is initialized
[ 4.813882] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.660514] systemd[1]: systemd 215 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 5.660690] systemd[1]: Detected architecture 'x86'.
[ 5.713519] systemd[1]: Set hostname to <Thinkpad-SL510>.
[ 7.304701] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.304780] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.304796] systemd[1]: Starting Remote File Systems.
[ 7.305131] systemd[1]: Reached target Remote File Systems.
[ 7.305165] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.305725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.305745] systemd[1]: Starting Encrypted Volumes.
[ 7.306028] systemd[1]: Reached target Encrypted Volumes.
[ 7.306050] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.306094] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.306107] systemd[1]: Starting Paths.
[ 7.306343] systemd[1]: Reached target Paths.
[ 7.306360] systemd[1]: Expecting device dev-disk-by\x2duuid-0da676d3\x2de00d\x2d4408\x2da0e4\x2d61af4ccfed22.device...
[ 7.306889] systemd[1]: Expecting device dev-disk-by\x2duuid-37e41bc7\x2daf4c\x2d4c7f\x2d97ff\x2decc785cc6263.device...
[ 7.307389] systemd[1]: Expecting device dev-disk-by\x2duuid-6692aca0\x2d5948\x2d4835\x2dadb5\x2d51941a76128f.device...
[ 7.307887] systemd[1]: Expecting device dev-disk-by\x2duuid-8829a0cf\x2da620\x2d438d\x2d8d1a\x2de386af97280f.device...
[ 7.308384] systemd[1]: Starting Root Slice.
[ 7.315232] systemd[1]: Created slice Root Slice.
[ 7.315253] systemd[1]: Starting User and Session Slice.
[ 7.315767] systemd[1]: Created slice User and Session Slice.
[ 7.315784] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.316114] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.316130] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.316519] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.316536] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.316926] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.316943] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.317282] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.317297] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.317631] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.317651] systemd[1]: Starting udev Kernel Socket.
[ 7.317945] systemd[1]: Listening on udev Kernel Socket.
[ 7.317963] systemd[1]: Starting udev Control Socket.
[ 7.318263] systemd[1]: Listening on udev Control Socket.
[ 7.318284] systemd[1]: Starting Journal Socket.
[ 7.318577] systemd[1]: Listening on Journal Socket.
[ 7.318611] systemd[1]: Starting System Slice.
[ 7.319093] systemd[1]: Created slice System Slice.
[ 7.319121] systemd[1]: Started File System Check on Root Device.
[ 7.319134] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 7.319690] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.346175] systemd[1]: Mounting Temporary Directory...
[ 7.355475] systemd[1]: Starting system-getty.slice.
[ 7.356130] systemd[1]: Created slice system-getty.slice.
[ 7.405020] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.405060] systemd[1]: Starting Setup Virtual Console...
[ 7.434270] systemd[1]: Starting Load Kernel Modules...
[ 7.435152] systemd[1]: Mounting Huge Pages File System...
[ 7.450675] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.451757] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.452682] systemd[1]: Mounting Debug File System...
[ 7.453572] systemd[1]: Starting udev Coldplug all Devices...
[ 7.454542] systemd[1]: Starting Journal Service...
[ 7.455770] systemd[1]: Started Journal Service.
[ 8.017658] vboxdrv: Found 2 processor cores.
[ 8.017849] vboxdrv: fAsync=0 offMin=0x19a offMax=0x113a
[ 8.017936] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.017938] vboxdrv: Successfully loaded version 4.3.12_OSE (interface 0x001a0007).
[ 8.066565] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.453787] systemd-udevd[137]: starting version 215
[ 9.297221] Monitor-Mwait will be used to enter C-1 state
[ 9.297230] Monitor-Mwait will be used to enter C-2 state
[ 9.297235] tsc: Marking TSC unstable due to TSC halts in idle
[ 9.297251] ACPI: acpi_idle registered with cpuidle
[ 9.297798] Switched to clocksource hpet
[ 9.397577] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 9.398331] ACPI: Lid Switch [LID]
[ 9.398442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 9.398448] ACPI: Power Button [PWRB]
[ 9.398520] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 9.398523] ACPI: Sleep Button [SLPB]
[ 9.398594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 9.398597] ACPI: Power Button [PWRF]
[ 9.714253] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.714258] ACPI: Thermal Zone [TZ00] (38 C)
[ 9.788226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.107244] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.107258] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.107608] r8169 0000:08:00.0: irq 46 for MSI/MSI-X
[ 10.107894] r8169 0000:08:00.0 eth0: RTL8102e at 0xf8e0e000, 60:eb:69:df:fc:5b, XID 04c00000 IRQ 46
[ 10.138235] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.151012] Linux agpgart interface v0.103
[ 10.156788] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.156794] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.156797] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.156799] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.156801] sound hdaudioC0D0: inputs:
[ 10.156804] sound hdaudioC0D0: Mic=0x18
[ 10.156807] sound hdaudioC0D0: Internal Mic=0x12
[ 10.187737] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140214/utaddress-258)
[ 10.187746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187751] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187757] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187760] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187762] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.200980] ACPI: Battery Slot [BAT1] (battery present)
[ 10.307840] [drm] Initialized drm 1.1.0 20060810
[ 10.331834] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 10.332165] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.332219] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.332274] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.346048] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 10.346167] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.346796] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 10.346977] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.403254] ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 10.403262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.407145] ACPI: AC Adapter [ACAD] (on-line)
[ 10.407653] wmi: Mapper loaded
[ 10.462739] Non-volatile memory driver v1.3
[ 10.483086] cfg80211: Calling CRDA to update world regulatory domain
[ 10.511461] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 10.511465] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.511467] thinkpad_acpi: ThinkPad BIOS 6JET85WW (1.43 ), EC 6JHT66WW-1.186000
[ 10.511469] thinkpad_acpi: Lenovo ThinkPad SL510, model 2847A65
[ 10.513121] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 10.517198] thinkpad_acpi: radio switch found; radios are enabled
[ 10.517210] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 10.517319] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 10.517321] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 10.518287] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
[ 10.617843] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 10.617954] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.640485] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
[ 10.717742] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[ 10.928161] media: Linux media interface: v0.10
[ 11.006082] iTCO_vendor_support: vendor-support=0
[ 11.008425] Linux video capture interface: v2.00
[ 11.015257] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.015302] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 11.015485] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.050172] systemd-udevd[146]: renamed network interface eth0 to enp8s0
[ 11.084784] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[ 11.084877] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 11.401469] [drm] Memory usable by graphics device = 2048M
[ 11.401476] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 11.401478] fb: switching to inteldrmfb from VESA VGA
[ 11.401504] Console: switching to colour dummy device 80x25
[ 11.423441] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 11.423454] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.423456] [drm] Driver supports precise vblank timestamp query.
[ 11.423531] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.474103] rtl8192se: FW Power Save off (module option)
[ 11.474191] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
[ 11.539577] fbcon: inteldrmfb (fb0) is primary device
[ 11.568063] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[ 11.568068] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 11.625453] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
[ 11.649292] mousedev: PS/2 mouse device common for all mice
[ 11.819295] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:481c)
[ 11.832647] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.0/input/input19
[ 11.832785] usbcore: registered new interface driver uvcvideo
[ 11.832786] USB Video Class driver (1.1.1)
[ 11.900636] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 11.912613] systemd-udevd[144]: renamed network interface wlan0 to wlp5s0
[ 12.173403] Console: switching to colour frame buffer device 170x48
[ 12.178613] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.178615] i915 0000:00:02.0: registered panic notifier
[ 12.191803] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.193501] acpi device:06: registered as cooling_device2
[ 12.193604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[ 12.193997] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.246859] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 13.644561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.954050] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.071585] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.166537] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 16.054096] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 16.358428] psmouse serio5: hgpk: ID: 10 00 64
[ 18.270058] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.588710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input18
[ 20.986088] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 20.997921] r8169 0000:08:00.0 enp8s0: link down
[ 20.997967] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 23.204726] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.231917] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.233796] wlp5s0: authenticated
[ 23.237347] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.241118] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.242837] wlp5s0: associated
[ 23.242852] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 23.407416] wlp5s0: deauthenticating from 8c:21:0a:77:4c:32 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 23.443391] cfg80211: Calling CRDA for country: US
[ 23.443467] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.463399] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.465298] wlp5s0: authenticated
[ 23.466930] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.471099] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.472786] wlp5s0: associated
[ 391.317544] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 495.430421] perf interrupt took too long (2517 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 526.290766] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 646.953268] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 767.198414] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
Last edited by jazzi (2014-07-31 12:22:09)
jazzi wrote:Sometimes the computer will freeze when booting into start virtual console.
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
You have to give us a hint.
What is your processor?
How much RAM have you?
What is your video card/ship set?
What kernel are you running?
I spotted this in your dump:
[drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
In this case, drm means Direct Rendering Management and has to do with your Video subsystem. An interrupt is where the hardware sends a signal to the processor that something has happened that requires the urgent attention of the processor. The kernel is protesting that the hardware is barraging it with interrupt requests.
Similar Messages
-
Systemd "Failed to start Setup Virtual Console"
I'me getting this error at boot, with no clue why/
Google only returns hits where it blocks startup, which it doesn't.
systemd-analyze dump
shows that all TTYs are loaded, which is proven by cycling through them.
There don't appear to be any problems, but red errors during boot irritate me.I've same issue, but it happens inside initramfs where I use systemd, but there's no errors after switching to new root. Any idea how to debug initramfs?
-
CS3 freezes when started on Mavericks
CS3 freezes when started on newly installed Mavericks (from 10.8). Last files are displayed and Regster window appears and then freezes up. Necessary to Force Quit to get out. I've "successfully" re-installed CS3 several times but the problem continues. What gives?
http://forums.adobe.com/thread/1342453?tstart=0
Mylenium -
VMM 2012 sp1 keeps on crashing when starts the VMM console
This problem has bothered us so much since we installed the last 1 or 2 update rolls. I was not able to find any relevant info online after digging for hours. The forum is my last hope now so any suggestion would be very much appreciated.
We are currently on 3.1.6018.0, with all the updates for SP1 installed. Every time we start the VMM console, we have to keep our fingers crossed, very likely it will crash and we have to restart the VMM service. Then we would be fine for a while until later
someone starts a new VMM console session.
The errors logged every time: 2 identical event 1(I found it interesting to have identical errors from the same source to be logged twice), and event 19999
Event 19999:
Error 1/12/2015 11:29:54 AM
Virtual Machine Manager
19999 None
Virtual Machine Manager (vmmservice:19340) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.1.6018.0
P3(assemblyName):Engine.Deployment
P4(assemblyVer):3.1.6018.0
P5(methodName):M.V.E.D.SANStorageManagementHelper.FindVolumeForGivenFileSystemPath
P6(exceptionType):System.NullReferenceException
P7(callstackHash):ad2a
Event 1
Error 1/12/2015 11:29:54 AM
Virtual Machine Manager
1 None
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.VirtualManager.Engine.Deployment.SANStorageManagementHelper.FindVolumeForGivenFileSystemPath(WsmanAPIWrapper wsmanWrapper, String inputFilePath, StorageManagementHelper storageManagementHelper, String& rootPath)
at Microsoft.VirtualManager.Engine.Deployment.SANStorageManagementHelper.GetLUNIDFromFSPath(WsmanAPIWrapper wsmanWrapper, String FileSystemPath, StorageDeviceIdentifier& storageIdentifier, String& VolumeRootPath, Boolean& IsiSCSILUN,
String& DiskDeviceID, String& DiskUniqueID)
at Microsoft.VirtualManager.Engine.Deployment.SANAcceleratorHelper.MapFSPathToLun(WsmanAPIWrapper sourceWrapper, String fspath, String& root, StorageDeviceIdentifier& lunID, Boolean& isIsciLun, String& diskAddress, String& diskUniqueID)
at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.MapFileOrDiskToLUN(WsmanAPIWrapper sourceWrapper, List`1 vmFilesToLunInfoList, Object physicalItemOrDiskOrPath, Boolean hypervVM, VMFilesToLunInfo hypervConfigLun)
at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.MapVMFilesToLUN(List`1& vmFilesToLunInfoList, WSManConnectionParameters hostConnectionParameters)
at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.GetVMLUNInformationFromRealWord(List`1& lunInfoList, WSManConnectionParameters hostConnectionParameters)
at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.GetVMSANConfigurationFromRealWorld(WSManConnectionParameters hostConnectionParameter)
at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.HasVMLUNInformationChanged(VMSANConfiguration& sanConfig, WSManConnectionParameters hostConnectionParameter)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateVMLUNInformation()
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.FullyRefreshVM(FullyResheshVMParamObject param)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.<>c__DisplayClassc.<RunFullRefresher>b__a(Object paramObj)
at Microsoft.VirtualManager.Utils.Multithreading.ThrottledThreadPool.<>c__DisplayClass3.<ScheduleNextThread>b__2(Object dummy)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()-2147467261I think the core part of the error should be this:
P5(methodName):M.V.E.D.SANStorageManagementHelper.FindVolumeForGivenFileSystemPath
P6(exceptionType):System.NullReferenceException
the VMM has all our NAS listed, but we are using CSV through failover cluster manager and not using VMM
to provision storage, is this part of the problem? -
Fails to boot, freeze during start-up
I have been having the following problems: In past few months, while OS is running, the computer freezes, the screen image gets a smokey overlay color and a white text on black (approx 3x5") error message appears telling me that I must reboot.
Upon reboot the system generally seemed to run OK until it happened again.
More recently the computer is not booting up. Generally I get the gray apple logo screen with the spinning wheel, it spins 1-1/2 to 5 times and then freezes. I have removed the non-apple extra 512 RAM, I have reset the PRAM, I have pushed the reset button under the keyboard, I have reset the PMU; and lastly I have tried to boot off of the Apple Hardware Test CD and the original Apple OSX CD. When booting off the CD and holding down the "C" key either the disk ends up poping out without starting up or nothing happens and the CD remains dead in the drive. If it does start-up it seems to try to do so off the HDD, but continues to freeze at the apple screen. One out of 30 tries got a successful startup, but then it froze again when I opened my first application.
I don't know if it is related, but when plugged in, the back of the computer under the 8 9 keys seems to get excessively hot.I went to the Apple Genius today.
The computer would not start up
He plugged in an exterior firewire hard drive with it's own startup disk OS software
After several attemps at pushing the start button the computer started up
It did not show the internal hard disk icon
but with utility software it showed up on the hardware list,
The Genius ran a disk utility software, found that the disk needed directory repair
Did so along with an optimization and then the imternal hard disk icon showed up and a quick check indicated all my folders were intact.
We shut down the computer, disconnected the firewire drive and then tried to
Restart, nothing happening, no whirling or chimes or light from the monitor.
The keyboard caps lock and numlock lights worked
Tried to get the power button to function or the keyboard equivalent.
Even tried the voodo of plugging the firewire drive back in,
But it justs sits their quietly and dark.
We agreed that the logic board must be the problem.
What do you think?
Do you know whether you can upgrade to a higher speed processor or would you go for a new one? -
Aperture 2.1 stuck or freezing when started
After the splash screen when I see the main screen, the beachball starts and doesn't stop. Except for the beachball the application freezes? I'm not sure what to do, I've rebooted,restarted I'm out of options. I'm in the middle of uploading a wedding so the timing is horrible. Also I don't use the vault. I hope someone has a solution for me.
Have the same problem. Aperture not starting, deleting preferences did not help, permissions are fixed, rebuilding library did not help, removing plugins did not help.
I have the following messages in the Console.app (the linked text is in boxed braces originally)
14.08.08 07:29:22 Aperture[7255] * NSRunLoop ignoring exception 'Exception in Aperture: Cannot remove an observer <ArchivePanelController 0x20615f10> for the key path "isMounted" from <RKArchiveVolume 0x20599600> because it is not registered as an observer.
No backtrace available.
' that raised during posting of delayed perform with target 0x13b4160 and selector '_delayedFinishLaunching'
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
14.08.08 07:29:22 Aperture[7255] Main Thread Exception in Aperture: * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
No backtrace available.
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
14.08.08 07:29:22 Aperture[7255] Main Thread Exception in Aperture: * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
No backtrace available.
14.08.08 07:29:22 Aperture[7255] * -[NSProTextFieldCell setVersionCountColor:]: unrecognized selector sent to instance 0x205d6940
Message was edited by: H.Mueller
Message was edited by: H.Mueller -
MSI ATI R4550-MD1GH card installed, boot freezes at starting windows
Hello. This is my first video card install,
I have upgraded the hard drive, added ram, etc, but never touched the bios, or video area. I installed the MSI R4550 after getting advice from HP that this card would work with my system, and the screen freezes at the starting windows page. I can boot up in safe mode, where I am now, but I cannot successfully download the drivers or the live update from safe mode. What do I do next to get this to work? Thank you very much for your time and help. I included system information in my profile as suggested, but will add here as well.
HP Pavilion a1430n
Asus A8N-LA socket 939 motherboard
300 watt power supply
AMD Athlon 64X2, 3800, 2GHz
FSB 2000MT/s
Chipset GeForce 6150LE
4 GB DDR1 DIMM installed
500GB Seagate Barracuda SATA
Windows 7 Ultimate (Media Center)It sounds like there's a problem with the drivers somewhere.
To start with, when your computer first starts up press the 'del' key and enter the BIOS. Look under any of the pages for an option to disable the onboard graphics. If you can't find this option then exit from the BIOS and move on to the next step. If you find the option then disable it, save changes and exit the BIOS.
Go back into save mode, go in control panel --> programs and features and uninstall the ATI drivers if they are present. Also check the nVidia graphics drivers are definitely uninstalled.
In device manager, click to uninstall any drivers installed for the graphics card and reboot.
See how that goes for now. -
Ichat 3.1.8 freeze when starting videoconversation
I have used ichat videoconversation for over 8 months now and all of a sudden it stopped working. I haven't done a thing.
I can see and hear the other person and he can hear me but my pic freeze just when the chat starts.
I have a pc with aim 5.5 and with that one I can videochat with other persons. It's just my Imac that don't work.
I also have portforward the right port and tried port 443.
I also have a netgear wgr 614v6Hi Tomas,
Did I read in another thread that you have a Thomson-Alcatel SpeedTouch modem ?
Can you tell us which model and which firmware it is running ?
With some of their range it can get intermittent results.
Out of 50 Buddies you get about 10 you cna contact all the time, a similar number of now and then contact and about 30 who you can never contact.
If you Buddy list is much smaller you may not have noticed this.
Also things are subject to change when the OS is updated or Upgraded.
Can you also tell us which device is doing DHCP ?
11:11 PM Friday; November 9, 2007 -
Firefox freezes when starting a download
When I start a download and choose the destination, Firefox freezes for about 2-3 seconds before starting to download. In that time, Firefox doesn't respond and acts like it crashed.
My computer is completely new, running Win8.1 64Bit from an SSD, Core i5 Quad, 8GB Ram and Avast Antivir. FF is configured to clear the cache everytime I exit.
It's almost the same as in https://support.mozilla.org/en-US/questions/937267 but in my case, every download makes FF freeze, not only the first.
I already tried deactivating the Web Protection of Avast and the integrated scanning feature of Firefox but this didn't solve the problem.Try using DownThemAll, a Firefox addon, it works perfect.
-
Error coming when starting SAP Management Console
Hi
Error is coming when trying to start the Server in Microsoft Management Console . Well this has started coming just now , it was working fine except one point i want to highlight is that on the machine WAS620gui was installed and i upgraded to WAS640 gui , so is it related to with the upgradation of gui ?
The error is :
Snap in failed to initialize |
Name : SAP system Manager |
CLSID {633547EE-A302-11D1-AE59-0800009B07DBB}|Hi
It seems that the registration of the sapmmc.dll failed.
You can recover SAP Management Console again by manually registering the MMC snap-in. Do the following:
Open a CMD.exe and walk through the directory containing the sapmmc.dll file (mostly is under %systemroot%\system32 directory) then execute the following command:
Regsvr32 sapmmc.dll
You should see a message confirmation that registration was successful.
Then start mmc again...it should now work smoothly!
Hope this helps!
Best Regards,
Federico G. Babelis
http://www.gazum.com -
Brcmsmac - boot freezes when wi-fi is off
I am having witch my wi-fi card BCM4313 running on the brcmsmac driver on the latest Arch kernel 3.4.4-3-ARCH. When wi-fi is off (my Toshiba A660 have a hardware button to control the state of wi-fi card) the boot process stuck after starting wicd, when wi-fi is on at boot everything works fine. And if I turn off the wi-fi while the system is already booted I don't get any problems, the system works fine (I tried to search networks - no freezers). It is possible to fix it witch out changing the driver (I don't like wl driver)? As I remember this happens sinc 3.2 kernel, on previous it works fine but downgrading the kernel isn't a solution. An idea?
Not really a solution for my problem - wicd deamon starts automatic at boot, and I don't wan change this.
-
Boot Freeze When overclocked w/ SATA drive
I just installed xp pro on 36 gig Raptor on sata 1 when i o/c i get a freeze at boot screen or dmi update sucess or it says ctrl alt del to restart read disc error. I can run a stable overclock when it was just my ata drive @ 2.59 mhz on air cooling, boot up just fine, but when i boot from an o/c with the sata drive connected i get the errors or freezes, i can boot a default setting and have core center overclock to 2.39 mhz but that is it. I am discouraged. Can anyone help?
64 3200 moble
k8v neo platinium bios 1.3
1 gig pc3200 Centon mem w/ laxed timmings - 2 sticks matched
1 x sata wd raptor 36 g
1 x maxtor 60g 7200rpm
5950 ultra Leadteck @ 571mhz/1000mhz @ 1.7v
nu tech 8x dvd burner
450w psu w/ x-blade case -- rails r stableThanks guys that worked! Now i have to get my bench marks back up there with the overclocking, although i could overclock higher on the ide vs sata but 100 mhz does bother me, its stable at 2.48 ghz, so i am happy bench marking better than fx-53 and 3800 in cpu scores, i got a 10000 in sisandra so i am happy.
again thanks
i was pissed. -
Libreoffice freezes when starting to TYPE ANYTHING. Cant reproduce.
I cannot do anything in libreoffice. When I first installed my default language showed up as afrikaan. I have fixed that by removing what I think was libreoffice-af. I have disabled jre and all extensions. I have tried reinstalling. (dont know how to purge packages though.) Basically I start math or writer, type a character and the whole program freezes and I get a popup saying libreoffice is unresponsive... click force quit. I have a feeling that if I completely purge libreoffice and reinstall *manually* (libreoffice-common libreoffice-writer libreoffice-math libreoffice-gnome) instead of installing by group it would solve the problem. I have searched the pacman wiki but can't find anything similar to apt-get remove --purge (came from aptosid).
Try moving the file ~/.conf/.libreoffice to something like ~/.conf/.xxxlibreoffice then restart libreoffice before re-installing it.
I, too, came from aptosid and find pacman much easier to work with than dpkg or apt. No need for purge in the debian sense. However, we need to deal with *.pacnew files now and then.
Neal -
[SOLVED] System freezes when starts using swap
When my system starts using swap, it completely freezes. Switching to tty doesn't work either.
There is already a topic on this problem, but the only advice it has is "use zswap" or "do not open 20 tabs at the same time", which is not really a solution imho.
I'm using a swap file in my home dir with swapon.
Last edited by TheChosenOne (2014-02-19 20:00:05)There is not much configuration going on.
What I do is this.
I'm kind of new to Arch Linux (used Ubuntu for a long time). How can I enable or see logs in Arch? -
60+ Second Freezes when starting ASIO Applicati
Hi, I'm having a problem with my Audigy2 ZS - it seems that every time the ASIO driver initializes, my PC freezes COMPLETELY (even the mouse) for about 30-90 seconds. After that, it goes back to normal. I've got the newest drivers installed and the applications in question are Guitar Rig 2 and Cubase SX 3.
Any suggestions?
I'm running Windows XP Pro SP2 on an A64X2 3800+ with 2 gigs of RAM, if that hel
ps.
Thanks in advance!Yes I think that's it. The Play > Pause trick didn't work on my source device, but what does work, is if I have two or more seconds of silence at the start of a track, is to press the RECORD button in Audition the moment PatchMix's "LOCK" indicator lights up. (I just put Audition and Patchmix on the screen, side by side.)
Unfortunately some discs have only 1 second or so at the start of the first track, so that doesn't work then. Audition seems to need at least 1 to 2 seconds (at least in Edit mode) to initiate the recording after pressing the RECORD button. Would be nice to reduce that latency, if there are any tricks - maybe using Multitrack mode?
Maybe you are looking for
-
Who knows how to install small windows on DVD?
Hi Guys I can't remember long time ago i saw a CD preinstalled windows within ready to launch on empty computer. that was very helpful to sort out my data when my windows failed to operate and i used it before i install new windows on it. Does anyone
-
Problem upgrading HSS from version 11.1.2.1 to 11.1.2.2
Hello, I am upgrading Hyperion Shared Services from version 11.1.2.1 to version 11.1.2.2 and am facing a problem with the HSS database upgrade. I am choosing to upgrade from a previous version of the DB, and the config tool shows everything ok with t
-
Hi Friends, I am really confused with this question,can someone please tell me how many objects would be created by the following code??My answer is two("java" on the heap and the normal new String() Object),am i right??? public class Objects{ publ
-
Mac PPC/CS2: Problems debugging a plugin
Hi I try to debug a plugin, but it doesn't work. - I have installed the debug version of Indesign CS2 - I have build the debug version of a SDK sample (Basic dialog) - I have opened the SYM file in CW9 Symbolics Window - I have opened the AdobeIndesi
-
USEREXIT_SAVE_DOCUMENT for the include MV50AFZ1
Hello Experts, I have query in which i have maintained one ztable , Now i have to select the fields vbeln, werks, matnr , lfimg from lips and lifnr, parvw, kunnr from vbpa table such that which ever partner function is found in VBPA from the below en