Booting from CD/DVD drive on HP Pavilion 17-e158sm Notebook PC

Hello,
I have a problem with my new Notebook. When I bought the computer it had free dots on it, soo i decidet to instal windows 7 on until I could get windows 8.1. The only problem was that windows 7 was 32bit. Now I have windows 8.1 64 bit on a DVD, soo I cant updait my widows 7, because it is 32 bit. The only way is to instal my new windows by booting from CD/DVD drive in BIOS. But I here is the problem. The notebook doesnt want to boot from DVD, it starts Windows 7 every time. I tried everything, like changeing the Boot order. Please help.
Hope my english is good enought.

Have you checked BIOS to see if Secure Boot is enabled? IF so disable it. Enable Legacy .Clear all secure boot keys.
Btw.When you installed Windows 7 did you boot from the dvd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

Ibook g3 M2453 boot from external DVD drive

Hi, I'm Simon from Germany.
I have an iBook M2453 Mac OS X and a lot of dvds.
But the iBook has no DVD drive. So I bought an external DVD drive. But no matter what I do during boot (press the C key or alt)
I can not boot from external DVD drive.
Please help me
Thank you.
Simon.
PS: I have translated the text using Google translate

Hi Simon,
the iBook is able to boot from USB, but this is not expected behaviour and not supported by Apple.
http://support.apple.com/kb/TA20554
There are some external enclosures that do the trick.
But only when you press ALT after Power on. (Select a startup volume via the Startup Manager)
External enclosures with Prolific PL-3507 chipset (Firewire/USB Combo)
You will find them on Ebay Germany
I have a Delock IDE>USB 2.0 enclosure for 2,5" HDs
http://www.delock.com/produkte/gruppen/Geh%C3%A4use/Delock_25_external_enclosure _USB20_42365.html?setLanguage=EN
that works also.
Hallo Simon,
das läuft nur mit einigen wenigen externen Gehäusen. Such auf Ebay nach "PL-3507"
und nimm eins mit Firewire und USB Anschlüssen.
Ein Festplattengehäuse von Delock für 2,5" Festplatten ging auch ( Link oben)
Ein Boot ist nur möglich wenn du die ALT Taste nach dem Einschalten drückst und dann über den Startup manager dein Boot volume auswählst.

Satellite C655D-S5303 will not boot from cd/dvd drive

I have already set the boot order in the BIOS to boot from cd/dvd drive first and it still goes straight to the HDD and starts Windows 7. I searched for this problem and found some people saying to switch it to CSM boot or disable secure boot but none of these options are available in the BIOS. I have it set to normal boot instead of fast so thats not the problem. Can anyone help me here? I am trying to reformat and reinstall Windows 7. I know the Windows 7 installation disk I have is good because I have used it in another computer and the cd/dvd drive works fine. I just can't get it to boot from the cd/dvd drive before the HDD.
Solved!
Go to Solution.

Satellite C655D-S5303
Downloads here.
Try setting the HDD to lowest boot priority. See Dave's solution in this message.
It's certainly easier to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are preinstalled in the proper order. Windows is preactivated.
If you failed to burn recovery discs, you can obtain recovery media from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
Satellite/Satellite Pro C600 Series User’s Guide
If you want Windows 7 Professional, upgrading takes only minutes.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
-Jerry

Satellite C655D-S5303 will not boot from cd/dvd drive

I have already set the boot order in the BIOS to boot from cd/dvd drive first and it still goes straight to the HDD and starts Windows 7. I searched for this problem and found some people saying to switch it to CSM boot or disable secure boot but none of these options are available in the BIOS. I have it set to normal boot instead of fast so thats not the problem. Can anyone help me here? I am trying to reformat and reinstall Windows 7. I know the Windows 7 installation disk I have is good because I have used it in another computer and the cd/dvd drive works fine. I just can't get it to boot from the cd/dvd drive before the HDD.

Satellite C655D-S5303
Downloads here.
Try setting the HDD to lowest boot priority. See Dave's solution in this message.
It's certainly easier to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are preinstalled in the proper order. Windows is preactivated.
If you failed to burn recovery discs, you can obtain recovery media from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
Satellite/Satellite Pro C600 Series User’s Guide
If you want Windows 7 Professional, upgrading takes only minutes.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade

Cannot boot from USB/dvd-drive on Satellite Pro M10

Hi,
since the internal dvd-drive is broken, an external USB drive is used. Now, I need to reinstall windows on a new harddrive. How can I boot from this external drive? (I do have a Floppy disk drive, but I cannot find the right drivers)
Thanks,
Luc

Hi,
you dont need any drivers for that USB-drive because the USB-floppy is a integrated peripheral of your computer. That means, everytime you connect the floppy to your machine, the computer sets that floppy like a internal hardwired floppy and thats the reason you wont need any drivers.
Its already installed when you plug it in.
Cheers

All users GONE except for "Other"...and CANNOT boot from External DVD drive

I booted the iMac (Intel...the last one with the White Bezel) tonight, and all of my users were GONE except for "Other." The internal Superdrive has had a disc jammed in it for months, so instead I have an OWC external USB/FW400/FW800 DVD drive. Snow Leaopard.
I need to boot from the SL install disc, but that must go into the external drive...which, as it's been since I upgraded to SL, the Mac sometimes sees and sometimes doesn't. Right now it can't see it. Which leaves me a big pile of crap, doesn't it?
So, what to do? I can't boot the internal drive because it's jammed with a DVD (or I spend $300 to replace what should be a $20 optical drive in it), I can't boot the external DVD drive because the iMac w/Snow Lepeord can't see it, and, meanwhile, all of my photos, etc., are on my Time Machine backup drive...which, as long as I can't do any of the above, just sits there...useless.
Can you tell I'm a bit frustrated with this?
I've reset the PRAM. I've rebooted. I've held down all sorts of combinations of keys. I've tried every single interface type on the external drive and the same thing - the drive can't be seen by the computer.
Has the internal hard drive failed? Nope. I'm tying this using the Firefox browser that's running on my Windows XP installation via Boot Camp on the internal hard drive.

Thanks, but no luck so far.
I have an old iMac G3 downstairs, and I connected it to the machine via Firewire. I could see the disk on the 24" iMac, its folders, etc. I wanted to see if I could install OS X via Target Disk Mode from the old machine to the new one, but it's a PowerPC machine and you can't do that. Maybe you can't do that from ANY iMac...I'm not that experienced.
Now the iMac isn't booting at all to Windows via Boot Camp - it's been booting for 45 minutes now with the "WinXP" logo, but nothing. I'm about to throw it in the car and haul it over to my parents, who have both a Powerbook and a 27" iMac. Maybe it'll work there. Who knows.
Other ideas...replace the internal hard drive (cheap)...if that doesn't work, I'll just sell the thing. I'm not going to sink $300 into the thing when I can get a new machine for around $600-$700. I may go to a Windows7 machine on the desktop and a Powerbook...maybe even an iPad.
I really want to love this iMac. It's my first (well, I did have the G3, but that was just to play with) Mac. It's given me a ton of problems since I bought it new. It's always been a "stock" machine - nothing weird done to it. I was hit with an iMovie update once, and that broke iMovie. Even the new iLife 2009 didn't fix it. Then, the internal optical disk drive failed. I couldn't believe that Apple used a proprietary optical drive rather than a stock Pioneer model. Price for the drive alone? $200.
I installed Snow Leopard 2 months ago, and that completely broke my ability to use external optical drives. Sometimes they work...most times they don't. This is an ongoing problem that many people are having (check the forums)...but no fix. Where does that leave me? With a useless computer.
So, I've boiled it down to this: I love the Mac software. I hate the hardware. Sure, it's pretty, but if something goes wrong, get ready to pay. I hate that Apple knows about problems, yet does nothing to address them, like the problem with external optical drives and Snow Leopard.
I bought the Mac because I was sick of Microsoft not being able to simply produce an OS full of security holes. Often times I read people bashing supposed "driver ****" with Windows, but look at what users of Windows machine are demanding of Microsoft - "please make my software compatible with the trillions of combinations of hardware that can run the os...all the way back to stuff that was created in the mid 1990s." Meanwhile, from my experience, Apple can't get their software to work with their own proprietary, supposedly vertically-controlled hardware.
Windows7 is a not bad OS. It's got it's faults, of course. But, if my optical drive failed in a Windows box, I'd have it replaced in 10 minutes...with a bluray drive...that can write...for under $100.
I use my computer for pictures, etc. In fact, we were ready to send off to iPhoto for our yearly photo books. That's not going to happen, as the photos are forever trapped on my Time Machine backup drive (lesson learned: dump photos to a generic format...fat32 works...just in case you decide to switch from Mac to Win7). iLife is great. MS Office is great, too, on the Mac. I love the little things the Mac does right.
After years of screwing around with my Windows box, I wanted a computer that acted like a consumer electronic device. That's not what I've gotten.
Ugh, so now do I buy a Mac Mini for $700, a new iMac for $1,400, or a Macbook Pro and a mac mini?
...or...do I continue to work within this silly Ubuntu Linux world?
Whatever the answer, I wish I didn't have to ask the question now.

Boot from CD/DVD drive?

Hello,
A friend is bringing his G5 over in a few hours to be fixed. Problem:
- OSX had died and needs to be re-installed.
- CD/DVD drive is busted.
Things I have:
Copy of OSX 10.5 on disc
Question: If I go buy an external USB CD/DVD drive, can I boot from it by holding down C?

Question: If I go buy an external USB CD/DVD drive, can I boot from it by holding down C?
Probably not. Purchase a FireWire drive to get that capability. The Mac OS X 10.5 DVD must be a retail one; a DVD which originally came with a Mac may boot but won't install the OS.
You may need to use the Option key at startup to boot from a FireWire drive.
(52955)

Boot from 1394 DVD drive?

Can I do a clean install of Win7 from a DVD drive connected to the firewire port? Will the laptop boot from that drive? I'm installing an unformatted SSD to replace my hard drive. Can the firewire port be considered either ATAPI 0 or ATAPI 1 in the BIOS?

Hello,
I do not think I have ever seen a ThinkPad boot from its FireWire (IEEE-1394) port. On the other hand, support for booting from an external USB CD or DVD drive is fairly standard these days.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Unable to boot from CD - Windows 8.1 - HP Pavilion 15-n209TX Notebook PC

Hi
I burned two ISO files(Memtest86+ & latest DBAN 2.2.8 CD bootable ISO software ) onto two different blank CD-Rs on two different ocassions by using the in-built Windows burner in my system, also used Cyberlink ISO file burner/Mount as Virtual drive.
Tried booting from CD by following Step 1 to 4 given in this MS link . After that clicked Select a USB Device, then boot from Internal DVD/CD Drive, then OK. It took some time to process & after that I got this screen:
When I entered BIOS Setup clicking F10 and there on Boot Device options, I got this screen:
I'm not able to understand why I can't boot from any CD. Could anyone please help me out.
Thanks very much in advance
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**
This question was solved.
View Solution.

Hi,
I won't be able to see the images you've uploaded until they have been approved by a moderator, but in the meantime, let me know what happens if you try the following.
Insert one of the bootable CDs in the optical drive and then shutdown the notebook.
Tap away at the esc key as you power on to access the Start-up Menu and then select the Boot Manager option ( f9 ).
If the optical drive is listed ( you should see two entries for it, one should have ( uefi ) as the suffix.
Select the drive with the arrow keys and hit enter.
Let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hyper-V 2012 R2 Gen 2 VM failed to boot from SCSI DVD drive using ISO image file

Hello:
I'm having a problem trying to install Windows 8.1 Professional on a new Gen 2 VM. I created a new Gen 2 VM using Hyper-V Manager running on Windows Server 2012 R2 and then told it to boot off DVD drive which pionts to the ISO file that I copied to the E:
drive. The ISO file mounted in the virtual DVD drive is the Windows 8.1 Professional x64 VL ISO that I downloaded off of TechNet. When I start up the VM to install the OS, I receive this error:
"Synthetic SCSI Controller (Instance ID 7512B228-F7BC-4DD8-B4F4-72A5B042C2E9): Failed to Power on with Error 'The file or directory is corrupted and unreadable.' (0x80070570). (Virtual machine ID 4195A398-3531-4A34-8588-D1FC3F3DD2D4)"
Basically the SCSI controller can't read the ISO file. However, the IDE controller on a Gen1 VM can read and boot from the ISO just fine. Has anyone else run into this problem? Is there a way to resolve this issue and allow me to boot the ISO from a SCSI
controller?
Or is there a bug with the Hyper-V SCSI controller that makes it unable to boot from ISOs properly?
-JP

Hi JP,
In addition , please try :
1. copy the ISO to an not shared local folder or drive
2. uncheck the "enable secure boot" in VM settings .
If the issue still persists , maybe you can try to down load a new ISO file then try to boot again .
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem booting from external DVD drive on Lenovo S10e

Hi,
I recently purchased a new Lenovo S10e ideapad, a few weeks prior to that I purchased an external DVD rewriter drive manufactured by LG, the drive works perfectly on every computer I try with the exception of the Lenovo ideapad S10e.
The thing is that the drive is being recognized and installed by the Windows XP Home Edition the S10e came with but when I try to boot a bootable CD using then drive on the S10e ideapad I almost alwasy fail to do so.
I set the S10e BIOS to have the USB CDROM as first boot device, in addition I used the F12 key to use the boot menu to choose the boot device, in 9 out 0f 10 atempts my external drive will not show in the boot menu and when choosing the enter setup option I see that the BIOS do not list it as the USB CDROM, instead it says "USB CDROM:" rather than have the drive name after it.
In the 1 time out of 10 it does work the BIOS seem to be identifying the drive and it shows in the boot menu, however I cannot work with it for a more than 1 minute without it stopped being recognized again.
The problem seems very strange to me as the drive works under the windows operating system and do not have any problem whatsoever on other computers, I have tested the external drive on my PC, another Mini Laptop from LG and a GIGABYTE Laptop (Normal one), all of which had no problems recognizing the external drive and booting from it.
I will really appreciate if I can get some help with the problem.
Thanks.

I've had a similar issue with X61 and the external DVD drive from Lenovo.
In my case, it was the power issue. On the back of the drive, there is a small table says that the drive needs a 3.0A 5V power input. One USB 2.0 port can only provide 0.5A. I don't know if the drive has any special, low power mode, but I suspect that even if it has, 0.5A is still not enough to fully power it. I've checked the current with the multimeter, and at peak times, the drive draws 550mA. Even then, it makes a stuttering sound for a few seconds, before finally spinning the DVD disk. I've also noticed that the DVD works most of the times when it's connected to the left USB port. That may be because of how the laptop's internal power circuicity is laid out (+separate USB host controller for each 'side' of the laptop). Another thing that seems to help is to disable all 5V driven devices that the laptop uses: the wifi card, bluetooth, any additional devices connected to the USB bus / to the ethernet port / SD card port (I'm not actually sure which of the devices are 5V and which are 3.3V, but the best option is to disable all of them), maybe even remove the battery (if it's charging). Finally, the DVD drive works better if the laptop was turned on and runnig for some time, rather than it being turned on "a minute before". Also, in the BIOS, there is a setting that changes the speed of the DVD drive, but switching it to "low" didn't seem to affect the external drive (at least not before Windows boots up).

Restore Disc Will Not Boot From External DVD Drive

I am using an original MacBook Pro that I decided could use a good restore, and started to clean house. The optical drive is broken, so I am using an external USB drive. I inserted the restore disc that came with the computer (It has OS X 10.4.6 on it), erased my HD, and proceeded to install Tiger. However, setup froze while installing Photobooth, and I was forced to shut down the computer.
I'm trying to get my Macbook Pro to boot from the restore disc that came with it so I can try setup again, but it won't work. If I hold C during the boot, I get a flashing folder with a question mark over it. If I hold option, I get a cursor, but just a blank, gray screen. In both instances, the external DVD drive is active and reading the disc, but I'm not getting any results on the screen. I've also reset PRAM.
If I can just get my computer to boot from the disc, I should be able to get back on track. Thanks.

When I press option during boot, nothing happens. Just a gray screen and cursor, like I described above. I haven't been able to test the external drive yet on another mac to see if it is bootable because I can't find the other computer's boot disc at the moment, but I'll try later with something else.
I have been able to access the drive through Target Disk mode successfully though. Is there something in particular I should do with the files? The folders are:
Applications
cores
dev
etc
Library
OSInstall.mpkg.998YblbM
System
tmp
Users
var
Volumes

Is it possible to boot from usb dvd-drive on Qosmio G20

I have QOSMIO-G20. I'd like to boot from the usb dvd-drive, but in bios i can use only external Floppy-drive :( is it possible to unblock bios or maybe to upgrade it that i can boot from the external dvd?

No. its not possible;
You can boot only form HDD, ODD, UDB FDD (floppy disk), LAN
Greets

My PowerMac G5 will not read my Leopard disc, dual layer dvd, how do I force boot from UBS DVD drive to install?? Or is there another way. It just keeps spitting out the disc!!

I have a power mac G5. Ir originally had Tiger on it. When I reinstalled for some odd reason the disc decided to install Panther, no clue why!! Either way I got a hold of a Leopard disc for this computer. It is apple certified and bought from Amazon and works for this computer.
Hoever, for some odd reason it keeps spitting it out. Discs under 4.7 GB is reads fine but the bigger discs it wont seem to read. What I need is to know how to get, or force, it to boot from an extrenal dvd drive. Or any other methods to get it to install.

I do not believe you can "Upgrade" directly from the "Panther" installed on your computer to "Leopard". You have to have at least "Tiger" installed already Before you can install Leopard. Thus your Mac is not recognizing the Leopard Install disk.

Booting from external dvd drive

hi all,
my optical drive in the 17" mbpro (1st gen) has finally packed up and it doesn't make financial sense to replace it when the external lacie units are half the price. Before i make the plunge, does anyone know of any limitations, if any, of using the external drive as the boot device for installs?
Thanks

hey guys,
my cd drive is fried too and i am using an external USB cd/dvd drive instead.
But now i just bought leopard and to install it i need to set the mac to boot from the drive.
The problem is that even when i press alt/option key at startup, the drive is not inculed on the available list as if it is not recognised.
Can somebody help me out please?
Thanks

Booting from CD/DVD drive on HP Pavilion 17-e158sm Notebook PC

Similar Messages

Maybe you are looking for