Booting T3-2 servers from downloaded Sol-11-1111 text installer media

Hello, I have attempted to boot my new T3-2 servers from an ISO on a DVD. Each time I get an error stating that the file doesn't appear to be executable. This same DVD worked on a T3-1 server. My issue is that the compressed onboard install media that runs when you startup the drive isn't complete. I tried to create the IPS to update and install packages and rsync, pkgrepo, pkgrecv, among other commands, were not found. When I installed my T3-1's everything was there. Very frustrating, I tried connecting a USB DVD drive up but no joy, it still won't see it even after using the alias found with devalias. This was something I had to do with some older Sun hardware that wouldn't boot from the internal drives like this one.
Any one have some information?
I have googled and searched the Oracle docs but nothing.
ej

Hello
I have question regarding installation Sun OS to T3-1 server. For Element Managament Syatem supported only this rel.
Now I faced with problem when can't install Sun 10 10/09 using internal dvd. And cant install from external Pioner DVD drive. Quiestion is did you have any recommendation how I can do this. Recommendation from sun doc to add in ehci.conf not helped to me, installation not started, so I try to find another way how?
Thanks in advance.
Will be gratefull for any recomendation

Similar Messages

Can't boot from windows 7 usb installation media

When trying to boot from windows 7 usb installation media no efi boot option availiable. Using "boot from efi file" option whith each and every .efi file on installation media results in a message saying "The selected boot device failed. Press <Enter> to Continue".
USB installation media created using original windows 7 iso image and couple diskpart commands(resulting in clean flash storage with a single active primary partition) plus simple copying of the iso image's contents on usb flash.
Enabling/Disabling SecureBoot doesn't have any impact whatsoever.
Installation boots from aforementioned media successfully when CSM enabled, though i would really prefer installing Windows 7 in uefi mode. Which microsoft claims Windows 7 supports.
Any help or suggestions would be much appreciated. Thanks in advance.
PS: my disappointment in this particular HP notebook is unspeakable. Aside from issue of the current topic, It keeps defaulting to windows boot manager when dual-booting windows & linux no matter what i do, and windows 8.1 Pro is constantly BSODing whenever i try to run fullscreen games on high-performance GPU whith every graphics driver i could possibly install (including both hp's own and amd's). Found silly workarounds for both of these issues, however still hate HP treating it's customers that way.

Booting from USB 2.0 port or DVD with SecureBoot disabled gets me to a screen saying "starting windows", just before the actual setup begins and then system simply hangs. Still unable to install. Thanks for your suggestion though.

Firefox problems - Can't open from Downloads - Can't print - FF will not update and more and more...

I've been having several problems with Firefox, to the point that I almost can't use it anymore. In no particular order, they include:
1. When I download something, 'Downloads' opens. When a d/l finishes I used to be able to run an install or open an image from there, but now I get this error message,
Windows cannot access the specified device, path of file. You may not have the appropriate permissions to access the item.
...but I can go to my Downloads directory and run or open it from there.
2. If I go to File > Print or File > Print Preview, I get this
Printing Error:
"Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer. Do you want to install a printer now?"
and if I click yes, i get this,
"Operation could not be completed."
3. Firefox will not update itself. I go to About, it downloads the new update, and I click the Apply Update button. Firefox closes, and nothing happens. A few minutes later I click to run it, and it opens with a 'Software Update' window that says,
Update Failed
"The partial update could not be applied. Firefox will try again by downloading a complete Update"
...and that does not work.
I download the new version, and when trying to run it from Downloads, I get the error (as in #1 above):
"Windows cannot access the specified device, path of file. You may not have the appropriate permissions to access the item."
When I go to the folder it's in and run it from there, it installs, but the problems persist.
4. I go to Help|Troubleshooting Information, and clicking the Reset Firefox button only closes Firefox. Clicking the Show Folder button doesn't do anything.
5. I used to be able to drag a url to the desktop, a folder or even a email, but now all I get the the O with a / through it.
6. I also used to be able to, when I click Browse on a site to upload a jpg or a gif, I could right click the file and open it in a photo viewing program (Irfanview or Paint), and now I get
"Windows cannot access the specified drive, path or file. You may not have the appropriate permissions to access the item."
I've created a new profile and it makes no difference.
I've disabled all add-ons and it makes no difference (I have to disable them manually).
The problems are there for different user accounts in Windows.
I've uninstalled Firefox, and removed the profile - rebooted and reinstalled it, but the problems persist.
What more do I have to do more to completely uninstall it?
I've kinda saved myself by using Firefox Portable, which I'm running from it's own directory. It runs as it should, but I'd prefer not to have to use it.
If i can't fix it, I'd like to completely uninstall Firefox, and just install it new and have it work properly. I have no (or only occasional minor) problems with Firefox on other computers. This computer is Win XP, fully updated

The post I was responding to said,
"Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps. "
Somehow, I think that means Windows...
I've tried Firefox in Safe Mode - it makes no difference.

User Guide missing from downloads

I've noticed that the User Guides are now missing from the downloads for various models. Is there a reason for this ? Although you can still retrieve them via Google, I was just easy finding them on the download page.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Majestic,
I've routed this to the eSupport team. Should hear from them soon
Thanks!
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0

Hi All,
I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps:
1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the old sol man version 3.1.
2.Copied the cofile and datafiles from old sol man and kept in trans directory of new Sol man 4.0 version at OS level.
3.Imported the requests into the new Sol Manager 4.0 successfully
4.When I tried to open the imported project it told me to run the "solman_log_comp_mgr program" to convert the project to the central logical components. I just did it and it went well.
I can see the project and do see the document types but no document names and getting all sorts of error messages when I tried to open these documents. Also I dont see the logical components under system landscape.
Before importing, I just have configured servers/hosts, databses and all the components of system landscapes in the new solution manager.
I request you to help me solve this issue. I also would like to know whether i followed proper procedures that i listed above? If not please suggest what procedures I should have follwed.
Thanks in advance.
Aravind Serikar

Hi Aravind,
to transport a project from 3.1 to 4.0 I would not use SOLAR_PROJECT_ADMIN to "migrate" a project. There for we developed SOLAR_MIGRATION there you can transport system landscape info, also you can transport projects. You should only transport system landscape info if in 4.0 SMSY is EMPTY. To transport projects you have only to specify your project and define a local folder. In this folder we store a few important information. Then all information will be collected in a batch job and automatically exported. Then you have to copy the data file and the cofile into the new trans folder. BUT do NOT forget the i-file. In the folder cofiles you will find a i-file, because we export knowledge warehouse content. This file is important, if you forget it you will get a return code 8. You do NOT have to add the files in the import buffer, we will do this automatically. To import the project, you have to call SOLAR_MIGRATION in SolMan 4.0 there you have to select import, then specify the folder with the few important information. We upload the info and start the import. That is it
Regards,
uDo

Unable to start Managed servers from admin console

Hello!
We have a problem to start Managed Servers throw Node manager.
We get an error:
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh >
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Working directory is '/software/psoft/pt851/webserv/peoplesoft'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Working directory is '/software/psoft/pt851/webserv/peoplesoft'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server failed during startup so will not be restarted>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Jan 26, 2012 2:17:54 PM> <WARNING> <Exception while starting server 'PIA1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'PIA1'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Additional information:
weblogic 10.3.3
PT8.51.11
Linux x86_64 RH5
When we starting Manged servers manualy, it's works fine.
Thank you.

Hello!
The problem is found.
We tried to startup managed server by running startManagedServer.sh script, but this script expecting to get parameters.
The NodeManager unable to send parameters to script that appears in nodemanager.properties file (StartScriptName).
So, I created a new script startPIA.sh, that calls to startManagedServer.sh and sends it 2 parameters:
./startManagedWebLogic.sh $SERVER_NAME $ADMIN_URL
Now, we can start and stop managed servers from admin console, BUT we still have an error in NodeManager:
<Jan 29, 2012 11:15:39 AM> <INFO> <peoplesoft> <PIA1> <Server failed during startup so will not be restarted>
Jan 29, 2012 11:15:39 AM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Jan 29, 2012 11:15:39 AM> <WARNING> <Exception while starting server 'PIA1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Jan 29, 2012 11:15:39 AM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'PIA1'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
There are no errors in managed servers logs.
PIA1.out:
<Jan 29, 2012 11:15:38 AM> <INFO> <NodeManager> <Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'>
Attempting to start WebLogic Server PIA1
No activity will be logged to this window.
Server activity will be logged to /software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1_*
PID for WebLogic Server PIA1 is: 27018
<Jan 29, 2012 11:15:39 AM> <FINEST> <NodeManager> <Waiting for the process to die: 26847>
<Jan 29, 2012 11:15:39 AM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Jan 29, 2012 11:15:39 AM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
The status of managed server in admin console is RUNNING, but "Status of Last Action" is FAILED.
What can be the reason?
Thank you.

I upgraded our CAM/CAS servers from 4.8.2 to 4.9.0 this weekend

I upgrade the servers from 4.8.2 to 4.9.0 this weekend and all of the servers now crash when introduced to user traffic. The upgrade shows no errors and I have not had a problem in the past the servers are 3355s. Has anyone else upgraded to 4.9.0?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I have recently downloaded Bootcamp onto my MBP. However, when i try to expand it from "downloads" it says "Unable to expand BootCamp5.0.5033 into downloads. Error 2-no such file or directory. I have tried changing the partition and Zipeg. didnt work

I have recently downloaded Bootcamp onto my MBP. However, when i try to expand it from "downloads" it says "Unable to expand BootCamp5.0.5033 into downloads. Error 2-no such file or directory. I have tried changing the partition and Zipeg. didnt work.

You need to read and follow the Boot Camp instructions. Boot Camp Assistant is already on your computer in the utilities forderf. You run Boot Camp Assistant. Part of the process is to to then download the Windows Support software. This download is then installed from within Windows.
There is no Boot Camp download that needs to be installed or unzipped from within OSx which you seem to be doing.

How to make bootable iso from download

how to make bootable iso from download

This one - https://www.microsoft.com/en-us/download/details.aspx?id=5587
1st: This is NOT a .ISO file!!
2nd. It is a .MSI file which is a Microsoft Installer file.
3rd: Read the instructions:
Install Instructions:
Click the Download button to start the download.
Do one of the following:
To start the installation immediately, click Run.
To save the download to your computer for installation at a later time, click
Save.
To cancel the installation, click Cancel.
When installation completes a file called readme.txt will open to provide instructions for burning a home computer restore CD. The file is also located
next to the ISO image file for later reference.
4th: If you are unable to read and follow instructions, there is nothing anyone in these forums can do to assist you. You must be capable of reading and following instructions!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
OK, well sorry to disagree with you but:-
1. Using windows 7, the download does not provide a save but only a run option.
2. In the MS predownload instructions you copied it refers to the readme text next to "the ISO image"
3. This is a copy of the read me file attached:-
"This ReadMe document is one of the Windows Home Server Home Computer Restore CD files. Unless you changed the installation location during setup, the Home Computer Restore CD files and license terms are located in one of the following folders:
* On Windows Vista: %HOMEPATH%\Documents\Windows Home Server Home Computer Restore CD (Dual Boot)
* On Windows XP: %HOMEPATH%\My Documents\Windows Home Server Home Computer Restore CD (Dual Boot)
To use the Home Computer Restore CD software, you must write the ISO image file (restorecd_dual.iso) to a blank CD. A CD/DVD burner is required to write
the ISO image file to the CD. Usually a CD/DVD burner includes the software that you need to write ISO image files. Follow the instructions with your burner software, and then select the option to write an ISO image, not the option to write
individual files. Note that you cannot write the ISO image by using Windows Explorer to copy the file to the CD-ROM drive.
Burning the ISO image creates a bootable CD. To restore your home computer, boot the computer from the CD and follow the instructions.
Microsoft may update the Windows Home Server Home Computer Restore CD software. You can download the latest version from the Microsoft Web site at http://go.microsoft.com/fwlink/?LinkID=109282.
If you want to review the license terms for the Windows Home Server Home Computer Restore CD, the file EULA_DUAL.TXT can be found in the same folder"
As you will see it refers to the downloaded .iso file. Nowhere is there a reference to a msi. As there was only a run function on the downloaded file, it could not be saved. How is an ordinary Windows user meant to interpret the instructs
if the download function does not work? What you do is try and follow the instructions and produce a load of frigging coffee mats, as it seems did many of the posters on this thread. Are we all illiterate?
If Microsoft could think in the way of a user it would help a lot of people.
So Rick Dee, please inform me how I misread the instructions?

[SOLVED]Hanging after booting from installation media

Yesterday I booted from a rw-DVD got to the terminal and could execute commands, connect to the internet and use elink etc no problem. I didn't go through with installation as I wanted to read up more on partitioning my drives for dual booting before actually doing so.
Trying the same thing today, and it hangs soon after I boot, regardless of whether I do anything. Printing the following:
nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xf0 [nouveau] returns -16
INFO: rcu_preempt detected stalls on CPUs/tasks: { 6} (detected by 1, t=18002 jiffiess, g=974, c=973, q=604)
This is without me typing anything. If I try to execute a command quickly after booting it sometimes works, but after a couple of minutes it will complain of a soft lockup.
I've tried burning another disk, and using a USB installation media, but the same thing happens. Any thoughts?
Edit: Trying to run it on a laptop with i7-4700MQ, 16GB ram, and Intel(R) HD Graphics 4600 / NVIDIA GeForce GTX 770M
Second Edit: Booted with nomodeset, which worked and allowed me to install. Just trying to sort out the sodding boot loaders now...
Last edited by glfharris (2014-07-11 22:42:31)

Welcome to the forum.
First of all, you should get in the habit of using [ code ] tags when posting code, not [ quote ] tags (well, unless you want to apply some styling to it, like bold, italic, etc).
This is wrong:
# umount /dev/sdc
This is correct:
# umount /dev/sdc1
You were trying to unmount the drive as a whole, which obviously isn't mounted, instead of the first (and probably only) partition. Had you followed the advice from the note to use blkid and check if it's mounted, this wouldn't have happened. But the fact that a DVD produced that error puzzles me... I have no experience with UEFI, but I think you need to press F10, F11, or something like that, to able able to get to a UEFI boot menu, and choose the optical unit as source.
I hope you used a BitTorrent client when downloading the ISO, and not some direct link (which are prone to CRC errors). If you used a direct link, then check the MD5 and make sure that it matches the one from the Download page. For future reference, torrents are checked while they're being downloaded.

Unable to boot Windows 7 Premium from an external harddrive

I recently gained an interest in playing microsoft based games, and just recently got my late 2013 macbook pro retina 15". I have been trying for several hours for the last two days to get bootcamp to boot Windows 7 Premium from a 500GB external harddrive without re-partiitioning my internal harddrive. I can get to the first screen of the Windows 7 Install asking about language, but neither my keyboard or mousepad respond with the windows installer. I assume this is because Windows 7 premium does not have USB 3.0 capability. Is there a workaround for this that doesn't involve partitioning my internal drive?

That's all fine and good, but I would strongly prefer not to have to use internal drive space for Windows. Even If I were to use the internal drive to install it, I would still run into the same problems of not having a keyboard or trackpad as I've seen other users having issues with. It stands to reason that if I had a working keyboard and mouse that I would be able to install it to an external hard drive, using a workaround method found here:
http://bleeptobleep.blogspot.fr/2013/02/mac-install-windows-7-or-8-on-external.h tml
If I had to partition my internal drive, what would be the absolute minimum amount of space I would need?

In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?

I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

Why when i copy paste documents from download to another folder,then i delete them from the downloads ,it will be erased at all?

I dl a file it goes to my doenload folder,then i copy it to another folder for example document,then when i delete it from download it will erase at all? why?
is it ok to have the file in both downloads and document? it will not be more size?

If you copy it to another folder, e.g., Documents, and you can see it in the Downloads folder then you now have two copies of the file. If you delete one copy, the other stays intact. If you keep both, there is no harm, although the amount of disk space used is twice as big as when you only keep one copy.

Downloads changing from "Downloading" to "waiting to download". Why?

Tonight while downloading a HD movie I was watching a couple episodes of a TV show I have on my ATV. Between episodes I would check my download progress and find that the status had changed from "Downloading" to "waiting to download". Can't you watch videos and download something else at the same time?
I did update a photo library and perform a sync during one of the shows I watched. Does that indefinitely pause a download. The sync took less than one minute.
I'm glad there are a few people here that know everything about the ATV. Very helpful. Thanks, KMA

Have you included an href in the jnlp element ?
are you trying to version the jnlp file too ?
/dietz

Why when i copy files from downloads to a new folder,then i delete them from the downloads i will loose the file?

tell me please when i copy files from downloads it will be a new file with new capacity? i mean if a file is 2 mb, when i copy it it will be new 2mb ?

If you copy it to another folder, e.g., Documents, and you can see it in the Downloads folder then you now have two copies of the file. If you delete one copy, the other stays intact. If you keep both, there is no harm, although the amount of disk space used is twice as big as when you only keep one copy.

Booting T3-2 servers from downloaded Sol-11-1111 text installer media

Similar Messages

Maybe you are looking for