Booting thinkpad t61 without a keyboard

I'm having the following problem with my Thinkpad T61.
Every few minutes the computer starts behaving as if a few keys on the keyboard are pressed. The keys are no physically stuck, the system just behaves as if they are. This happens sometimes for no apparent reason, but I can always make it happen by pressing any kye on the bottom right side of the keyboard.
I've concluded that the keyboard is faulty and ordered a new one.
In the meanwhile, I'm trying to use my laptop with an external (USB) keyboard. This doesn't quite solve the problem, b/c the laptop still allows input from the internal keyboard, so it still messes up too frequently. I've tried disabling the keyboard, but the Device Manager doesn't seem to allow me to do that. I thought of physically removing the keyboard, but then I don't have a Power button!
Does anyone have an idea for me for how to use my laptop until the replacement keyboard arrives?
Is there a way to boot the computer without a keyboard connected?
Solved!
Go to Solution.

How about unhooking the keyboard cable and taping the end so it doesn't make contact with anything on the board and leave the keyboard on so you still have the power button.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Thinkpad T61 malfunctioning of Keyboard & Fingureprint Reader

M/t: 6463-4YU
S/n:
Problem:
Keyboard Hang when login via Fingureprint Reader & if logon from keyboard
fingerprint doesnt work
Moderator edit: Masked serial number to prevent misuse.

How about unhooking the keyboard cable and taping the end so it doesn't make contact with anything on the board and leave the keyboard on so you still have the power button.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Is it possible to boot into the OSX DVD Without a keyboard?

Hi everyone,
Today I found a WORKING 800mhz PowerMac G4 Quicksilver (2002) at my local thrift shop for $15. Hard Drive was skipping and I had a 160GB hard drive laying around, so took the bad hard drive out and now it works, at least it has been. But heres the problem. My USB keyboard (My only one, btw) doesn't work when I start it up so when I press the power button and hit C nothing happend because my USB keyboard isn't working with it for some reason. Is there a way I can boot into the Mac OS X Startup disc to install the OS without a keyboard?
Thanks,
Erik

Hi, might also try this...
reset FW bus, same goes for USB reset...
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Gummiboot loader.conf without a keyboard plugs in, hangs at boot menu.

Hi, i've set up gummiboot to boot without a timeout, on the arch entry conf. This works fine with a keyboard plugged in, but whenever I take the keyboard out and boot without the keyboard plugged in, Gummiboot seems to ignore the timeout, and puts me to a menu, waiting for input, which obviously I can't select cos there's no keyboard plugged in. Is there any way to get round this?

bergqvistjl wrote:
MagicSkyFairy wrote:
I don't know the answer but maybe I can help you find it yourself? I'm sure there is a log with some sort of error message. I'm still sort of new, so I'm not sure about what logs keep track of what, or the names of all the logs.
Here are the ones I know: /var/log/Xorg.0.log, journalctl, and dmesg. You can use tail -n <number of lines to show> to go straight to the bottom of the log.
Also, maybe theses will help:
https://wiki.archlinux.org/index.php/Boot_Debugging
and
https://wiki.archlinux.org/index.php/Gu … leshooting
The troubleshooting problem is different but maybe deleting the $ESP/loader directory and all of its contents, and recreate the necessary configuration files. will work for this one too.
Hopefully doing that doesn't mess anything up even more, I'd feel bad.
I'm sorry but I don't think you're going to be much help. It doesn't even boot.... it waits on the gummiboot menu whenever a keyboard is not plugged in is the problem
Ah, then yes, I will be absolutely no help at all. Good day to you, sir.

Thinkpad T61 kernel panics

I'm having some trouble with random kernel panics on a thinkpad T61. Sometimes they occur just after boot yet other times I can be using my laptop for hours with absolutely no problems before it decides to panic. I've attached a picture of the error message I get and the output of some commands I thought would be relevant.
My /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
MOD_AUTOLOAD="yes"
MODULES=(e1000e snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
USELVM="no"
# NETWORKING
# Should also be put in /etc/hosts
HOSTNAME="alasdair-laptop"
NETWORKS=(ethernet gp)
# DAEMONS
DAEMONS=(syslog-ng acpid @net-profiles netfs crond @alsa)
Here's my dmesg, taken just after booting.
Linux version 2.6.25-ARCH (root@workstation64) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007deb0000 (usable)
BIOS-e820: 000000007deb0000 - 000000007decc000 (ACPI data)
BIOS-e820: 000000007decc000 - 000000007df00000 (ACPI NVS)
BIOS-e820: 000000007df00000 - 000000007e000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1118MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6900] 000f6900
Entering add_active_range(0, 0, 515760) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 515760
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 515760
On node 0 totalpages: 515760
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2237 pages used for memmap
HighMem zone: 284147 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
ACPI: XSDT 7DEBB77F, 0094 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: FACP 7DEBB900, 00F4 (r3 LENOVO TP-7L 2170 LNVO 1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
ACPI: DSDT 7DEBBD1D, FED1 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: FACS 7DEE4000, 0040
ACPI: SSDT 7DEBBAB4, 0269 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: ECDT 7DECBBEE, 0052 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: TCPA 7DECBC40, 0032 (r2 LENOVO TP-7L 2170 LNVO 1)
ACPI: APIC 7DECBC72, 0068 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: MCFG 7DECBCDA, 003C (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: HPET 7DECBD16, 0038 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: SLIC 7DECBDF0, 0176 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: BOOT 7DECBF66, 0028 (r1 LENOVO TP-7L 2170 LTP 1)
ACPI: ASF! 7DECBF8E, 0072 (r16 LENOVO TP-7L 2170 PTL 1)
ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2ED5, 01D8 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511731
Kernel command line: root=/dev/disk/by-uuid/bf262041-d9e8-494d-becc-808ef613eef2 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2094.737 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2040240k/2063040k available (2083k kernel code, 21556k reserved, 711k data, 268k init, 1145536k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03c1000 - 0xc0404000 ( 268 kB)
.data : 0xc0308fe8 - 0xc03baea0 ( 711 kB)
.text : 0xc0100000 - 0xc0308fe8 (2083 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 4197.54 BogoMIPS (lpj=6992869)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4191.12 BogoMIPS (lpj=6982598)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Total of 2 processors activated (8388.66 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 1229046 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to: check_tsc_sync_source failed.
Brought up 2 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff has been reserved
system 00:00: iomem range 0xe4000-0xe7fff has been reserved
system 00:00: iomem range 0xe8000-0xebfff has been reserved
system 00:00: iomem range 0xec000-0xeffff has been reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xd4000000-0xd6ffffff
PREFETCH window: 0x00000000e0000000-0x00000000efffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: 0xfc000000-0xfdffffff
PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: 0xdc100000-0xdf2fffff
PREFETCH window: 0x00000000dfd00000-0x00000000dfdfffff
PCI: Bridge: 0000:00:1c.2
IO window: 5000-5fff
MEM window: 0xd8000000-0xd9ffffff
PREFETCH window: 0x00000000dfa00000-0x00000000dfafffff
PCI: Bridge: 0000:00:1c.3
IO window: 6000-6fff
MEM window: 0xd0000000-0xd1ffffff
PREFETCH window: 0x00000000df700000-0x00000000df7fffff
PCI: Bridge: 0000:00:1c.4
IO window: 7000-7fff
MEM window: 0xcc000000-0xcdffffff
PREFETCH window: 0x00000000df400000-0x00000000df4fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
IO window: 0x00008000-0x000080ff
IO window: 0x00008400-0x000084ff
PREFETCH window: 0xf4000000-0xf7ffffff
MEM window: 0x80000000-0x83ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 8000-bfff
MEM window: 0xf8100000-0xfbffffff
PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:15:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 554k freed
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 268k freed
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 16
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 08.0 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
ata4.00: ATAPI: Optiarc DVD RW AD-7910A, 1.D1, max UDMA/33
ata4.00: configured for UDMA/33
ata5: port disabled. ignoring.
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7910A 1.D1 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:d6:46:39
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 4, PHY: 6, PBA No: 1008ff-0ff
ACPI: PCI Interrupt 0000:00:1b.0[b] -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7DEE1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7DEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (52 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [THM1] (42 C)
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.19
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
input: ThinkPad Extra Buttons as /class/input/input5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: WMI: Mapper loaded
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: device:03 is registered as cooling_device2
input: Video Bus as /class/input/input6
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: device:08 is registered as cooling_device3
input: Video Bus as /class/input/input7
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
iwl4965: Copyright(c) 2003-2007 Intel Corporation
usb 3-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 3-0:1.0: unable to enumerate USB device on port 1
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
hub 6-0:1.0: unable to enumerate USB device on port 2
usb 1-2: USB disconnect, address 2
input: PC Speaker as /class/input/input8
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:15:00.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:15:00.1 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4]
Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
usb 7-1: new high speed USB device using ehci_hcd and address 2
Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
cs: IO port probe 0x8000-0xbfff: clean.
pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input9
usb 7-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Monitor-Mwait will be used to enter C-3 state
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a26dd3a]
EXT3 FS on sda3, internal journal
Adding 891596k swap on /dev/sda4. Priority:-1 extents:1 across:891596k
Clocksource tsc unstable (delta = -297926941 ns)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
scsi 5:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input10
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: RX authentication from 00:1f:5b:88:6f:1f (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1f:5b:88:6f:1f
wlan0: RX AssocResp from 00:1f:5b:88:6f:1f (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1f:5b:88:6f:1f)
wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
padlock: VIA PadLock not detected.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sdb.
usb 7-1: USB disconnect, address 2
usb 7-2: new high speed USB device using ehci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
lsmod
Module Size Used by
nls_cp437 5888 1
vfat 10880 1
fat 45984 1 vfat
aes_i586 8064 1
aes_generic 27432 1 aes_i586
usb_storage 84800 1
joydev 10048 0
pcmcia 33068 0
firewire_ohci 16512 0
firewire_core 36928 1 firewire_ohci
crc_itu_t 2304 1 firewire_core
arc4 2176 2
ecb 3072 2
ohci1394 28720 0
serio_raw 5508 0
yenta_socket 23436 1
rsrc_nonstatic 11264 1 yenta_socket
ieee1394 79288 1 ohci1394
pcmcia_core 33300 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 2816 0
psmouse 36752 0
i2c_i801 9232 0
i2c_core 19348 1 i2c_i801
iwl4965 101748 0
mac80211 130572 1 iwl4965
cfg80211 16392 1 mac80211
video 16656 0
output 3200 1 video
ehci_hcd 33932 0
bay 4736 0
wmi 6056 0
uhci_hcd 22288 0
usbcore 129904 4 usb_storage,ehci_hcd,uhci_hcd
intel_agp 23740 0
agpgart 28244 1 intel_agp
sg 27188 0
thinkpad_acpi 53624 0
nvram 7436 1 thinkpad_acpi
thermal 15260 0
processor 32096 3 thermal
evdev 9472 0
fan 4356 0
button 6416 0
battery 10372 0
ac 4484 0
snd_seq_oss 30336 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 48560 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_hda_intel 336440 0
snd_hwdep 7428 1 snd_hda_intel
snd_pcm_oss 38656 0
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_timer 19848 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14848 1 snd_pcm_oss
snd 46628 9 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6496 1 snd
e1000e 90916 0
rtc_cmos 9120 0
rtc_core 15516 1 rtc_cmos
rtc_lib 2944 1 rtc_core
ext3 124040 1
jbd 44052 1 ext3
mbcache 7172 1 ext3
sd_mod 23320 5
sr_mod 15300 0
cdrom 34080 1 sr_mod
ata_piix 17668 0
ahci 25224 2
ata_generic 5636 0
pata_acpi 4992 0
libata 142224 4 ata_piix,ahci,ata_generic,pata_acpi
scsi_mod 92332 5 usb_storage,sg,sd_mod,sr_mod,libata
dock 7952 2 bay,libata
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)

Sorry to ressurect an old thread, but recently I've been getting random kernel panics on my t61 as well. I believe the root cause is the wireless card. I have an intel 4965 card just like you.

What drivers do I need to reinstall different OS and where can I download them for ThinkPads T61?

I just accidentally purchased one ThinkPads T61 with Linux OS version. I don't use Linux so I plan to wipe out Linux and install Windows XP Pro instead. I have the Windows OS, but as I know I will need to install some drivers afterward to make the notebook work properly.
My question would be: How many and what drivers do I need to reinstall different OS and where can I download them?
Thank you for your help!
Solved!
Go to Solution.

Right here.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

How to Restore thinkpad t61 with Windows 7

I have a thinkpad t61 laptop and Im using windows 7 . Now when i start my laptop, i see a blue screen and it keeps on restarting and it doesn't boot in to windows.
I tried to restore to factory settings and i couln't find a option to restore after hitting the blue button.
Any help guys???

To download itunes, go to this link. http://www.apple.com/itunes/download/

How do I start-up in Target Disk mode without a keyboard ....?

I am trying to start-up an iMac 700 G4 flatpanel in Target Disk mode without a USB keyboard ... the machine is running Mac OS X.3 Panther & the system prefernces do not include the start-up in Target mode feature that Mac OS X.4 Tiger has ...
Actually, I do have a bluetooth keyboard which works fine once I get to the desktop - but the keyboard will not pair quick enough to register the 'T' hold-down before the system boots up ...
Q: Is there another way I can get this machine to boot in Target mode ...?
Maybe a terminal command ....?
I am not so savvy with Terminal - but if someone can step me thru it (v e r y s l o w l y) - you will have my sincerest gratitude ...;-)
Nutshell: Firewire Target startup between iMac 700 running Panther with no keyboard - to G5 PowerMac running Tiger ....

Niel ....
That's so helpful!! very happy mate - thank you ....
I have successfully booted into Target Disk mode using the command at Mac Geekery as suggested ... however, a backward step is now required without access to the machine's terminal window ...
Q1: How do I reset the PRAM without a keyboard ...?
Q2: What is the Open Firmware reset command via a 'hard-pressed' power-up using the Power button at the rear of machine ...?
... I still cannot pair my Bluetooth Keyboard early enough to register a PRAM reset (Opt Cmd P+R) at start-up (as per instructions by the authour) before the system boots back into the 'fixed Target mode ...
Any suggestions ...? ... or can anyone else assist ...?
Oh, & thanks again everyone ... & apologies this request might not be in the correct catergory ....
Best,
Macfinger

Sporadic reboots of a Thinkpad T61

Hello,
we have a Lenovo Thinkpad T61 that reboots itself every few days without providing any information in the logs about the reason for this behaviour.
I ran the Lenovo pc-doctor and got a failed result for the nvidia gpu with the error code 7082. Could you please help me with the meaning of this error code? Is there a list where I can find out what this error code stands for?
Best Regards,
Matthias

reboot with no message might be overheating. cleaning the fan and replacing thermal paste is cheap and certainly won't hurt anything.

Satellite L100-113 - Changing BIOS without a keyboard

My keyboard is not working. The easy answer for the moment would be to use a USB keyboard, except that option is disabled in the BIOS.
Is there any way to change or reset the BIOS without a keyboard?

Hi
Try to boot the Windows OS and start the Toshiba Assist.
There you can find the Toshiba HWSetup. This tool contains some options which could be changed in BIOS too.
So I think there could be a option which enables the USB keyboard support.
I think this should be possible using the USB mouse.

Dead bios with Thinkpad T61

update T61 BIOS,the laptop can not boot and black screen.There is a way to blind flash the bios?
I found the DVD-DRIVE can read?
Message Edited by moreal on 08-14-2008 06:32 AM

Hello,
I have seen otherwise operational computers running Microsoft Windows Vista fail to boot when the mode for the SATA interface is changed.
Prior to booting into Microsoft Windows Vista on the ThinkPad T61, try entering the BIOS setup screen and toggling the SATA interface from AHCI to Legacy (or vice-versa), saving the settings and then booting up into Windows. Does this make any difference?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

New P7N SLI Platinum Boot Issue with PS/2 Keyboard [Solved but RAID problem now]

This issue taken me back !!!! Never thought I might face issue with a PS/2 Keyboard.
Here it is.. I just assembled my new system...
P7N SLI Platinum Motherboard
E8400 CPU
EVGA 256-P2-N751-TR GeForce 8600 GT Video Card
Creative Soundblaster Audio Card
So, before I boot, I connected good old PS/2 Keyboard. The POST Screen comes up that says Press DEL to enter BIOS Setup... but then, it reboots.. indefinitely... I have no idea why it does that. However, if I boot the PC with no PS/2 Keyboard connected, POST screen comes up and that's it.. (no reboot). So, you see, I cannot proceed further in anyway.... I cannot go beyond POST without a keyboard, but then with the keyboard it reboots indefinitely... kinda catch 22 situation
Any suggestion / ideas that anyone can offer here???

Hello Folks... it took long time to "solve the issue that had to begin with"....
I purchased a cheapo Celeron processor to get into the BIOS and update it... but it didn't even work... I couldn't boot at all. So, I called MSI and they asked me to RMA it. They replaced my MOBO with the latest BIOS - which was good news
So, now, I'm able to boot - good news...
Now, this is an upgrade for me.... from my previous MOBO. My boot drive was RAIDed (RAID 0). So, now, I will have to RAID my drives again and run Win XP repair. I was able to RAID my drives and all good... now, I went into Windows installation and did F6 to install NVIDIA Raid.... but, here is my problem, when the prompt asks me to input the floppy drive, and when I did it.... it re-prompts me to put the floppy drive again... I see that the floppy drive is read... but, for some reason it doesn't detect the files in there properly.... I downloaded nVidia C72+MCP55 SATA RAID / AHCI Driver (For floppy driver) for windows xp 32-bit and copied the sataraid folder contents into the floppy. Now, here I am stuck again....
Anybody experienced this problem?

Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse

Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse can be quite a challenge. Even if you use the experimental 2x UI. You can not use your fingers or to quickly change tools and change settings. You have no shortcut without popping up Windows touch keyboard or leave it up taking a great deal of screen space. If you're using the 2x UI Photoshop uses the screen at half resolution so it displays 1/4 the amount of pixels it could.
Fortunately I found a little touchkey utility on the web the lets you design your own touch keyboards. The can be transparent and you can even paint under them as long as you start the stroke outside the keyboard area. The keyboards can be toggles on and off so you can actually use Photoshop. The utility is small and requires not installation can be run form anywhere. I purchased a Surface Pro 3 a week ago. Its a full fledge PC. Through the home group I can access all machines in my house and using network shares I can access all files on my machines and the network drive on my router, I can print on my Epson 4800 printer. I can show slideshow on my HDTV via Bluetooth using a Microsoft wireless display adapter. I can plug in my Wacom Intuos Pro wireless receiver into the USB 3 port and use my Wacom tablet. Have a very touchy machine. Touch on the keyboard touch pad touch on the Display display and on the Wacom tablet. Could have touch on a mouse but I prefer the Microsoft comfort bluetooth mouse that has six buttons and a four way wheel.
As a tablet its under two pounds. Its quite impressive cost why mor the an iPad but worth the cost to me for with windows I can get at the file system. If you have a Surface Pro 3 you should check out "Touchkey" its handy.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

How do I open my optical drive without a keyboard

I'm running a Quicksilver Dual 800 G4, without monitor, keyboard, or mouse. I can access it using my MacBook Pro, and view it using Screen Sharing. I want to install software from a DVD onto the dual 800, but how do I open the drive to insert the DVD?
I have another Quicksilver (Dual 867 MDD) which has two optical drives, and on the status bar amidst the airport signal indicator, bluetooth indicator, etc is an eject symbol, which allows me to choose the optical drive I want to open. I have a keyboard connected to this machine, but as the facility exists in OS X to provide that functionality, how can I hack OS X to provide this option in the dual 800 with only one drive?

Thank you for replying. Malcolm (above) managed to provide the exact solution I was looking for at the same time as you were typing your reply, judging from the time.
I'm accessing the QS from my MacBook Pro (OS X 10.5), using a wired/wireless connection - the QS is wired, the MBPro wireless. At the moment they are about twelve inches apart, and I do have a keyboard to plug into the QS, but I'm hoping to set it up as a headless unit to take time lapse photos (using an iSight) and a clever script available here: http://gawker.sourceforge.net/Gawker.html
Once set up, I hope to access the QS remotely, as it will live in Birmingham, and I live in Bristol! So thinking as far ahead as possible, I wanted to set it up to be controlled as much as possible by me, even if my caretaker in Birmingham has to put a disc in the tray from time to time.
Again, many thanks!
kind regards
Andrew McDermott

Thinkpad T61 reports in-correct EDID data to Xorg

Thinkpad T61 with Quadro NVS 140M reports in-correct EDID data . Primary issues is that I want to switch to "1024x768" resolution which is well supported for LCD projectors. But currently with default setting nvidia driver it gives only the following resolutions. Is there any BIOS update for this ??
root#xrandr
Screen 0: minimum 640 x 480, current 1680 x 1050, maximum 1680 x 1050
default connected 1680x1050+0+0 0mm x 0mm
   1680x1050      50.0*    51.0     52.0
   1600x1024      53.0
   1280x1024      54.0
   1280x960       55.0
   800x512        56.0
   640x512        57.0
   640x480        58.0
Here is the snip of Xorg.0.log
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86GL) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.3e.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
(--) NVIDIA(0):     IBM (DFP-0)
(--) NVIDIA(0): IBM (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): IBM (DFP-0): Internal Dual Link LVDS
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     HorizSync range (53.398-64.075 kHz) would exclude this
(WW) NVIDIA(0):     mode's HorizSync (42.7 kHz); ignoring HorizSync check for
(WW) NVIDIA(0):     mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     VertRefresh range (50.000-60.000 Hz) would exclude this
(WW) NVIDIA(0):     mode's VertRefresh (40.1 Hz); ignoring VertRefresh check
(WW) NVIDIA(0):     for mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     HorizSync range (53.398-64.075 kHz) would exclude this
(WW) NVIDIA(0):     mode's HorizSync (42.7 kHz); ignoring HorizSync check for
(WW) NVIDIA(0):     mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     VertRefresh range (50.000-60.000 Hz) would exclude this
(WW) NVIDIA(0):     mode's VertRefresh (40.1 Hz); ignoring VertRefresh check
(WW) NVIDIA(0):     for mode "1680x1050".
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No valid modes for "default"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0):     "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (129, 127); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xf8102400 - 0xf81024ff (0x100) MX[B]
   [5] -1   0   0xf8102000 - 0xf81020ff (0x100) MX[B]
   [6] -1   0   0xf8101c00 - 0xf8101cff (0x100) MX[B]
   [7] -1   0   0xf8101800 - 0xf81018ff (0x100) MX[B]
   [8] -1   0   0xf8101000 - 0xf81017ff (0x800) MX[B]
   [9] -1   0   0xdf2fe000 - 0xdf2fffff (0x2000) MX[B]
   [10] -1   0   0xfe227400 - 0xfe2274ff (0x100) MX[B]
   [11] -1   0   0xfe226000 - 0xfe2267ff (0x800) MX[B]
   [12] -1   0   0xfe227000 - 0xfe2273ff (0x400) MX[B]
   [13] -1   0   0xfe220000 - 0xfe223fff (0x4000) MX[B]
   [14] -1   0   0xfe226c00 - 0xfe226fff (0x400) MX[B]
   [15] -1   0   0xfe225000 - 0xfe225fff (0x1000) MX[B]
   [16] -1   0   0xfe200000 - 0xfe21ffff (0x20000) MX[B]
   [17] -1   0   0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
   [18] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [19] -1   0   0xd6000000 - 0xd6ffffff (0x1000000) MX[B](B)
   [20] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [21] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [22] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [23] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [24] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [25] -1   0   0x00001c60 - 0x00001c7f (0x20) IX[B]
   [26] -1   0   0x00001c20 - 0x00001c3f (0x20) IX[B]
   [27] -1   0   0x00001c18 - 0x00001c1b (0x4) IX[B]
   [28] -1   0   0x00001c40 - 0x00001c47 (0x8) IX[B]
   [29] -1   0   0x00001c1c - 0x00001c1f (0x4) IX[B]
   [30] -1   0   0x00001c48 - 0x00001c4f (0x8) IX[B]
   [31] -1   0   0x00001830 - 0x0000183f (0x10) IX[B]
   [32] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [33] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [34] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [35] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [36] -1   0   0x000018e0 - 0x000018ff (0x20) IX[B]
   [37] -1   0   0x000018c0 - 0x000018df (0x20) IX[B]
   [38] -1   0   0x000018a0 - 0x000018bf (0x20) IX[B]
   [39] -1   0   0x00001880 - 0x0000189f (0x20) IX[B]
   [40] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [41] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [42] -1   0   0x00002000 - 0x0000207f (0x80) IX[B](B)
   [43] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [44] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "CalcAlgorithm" is not used
(==) RandR enabled

Hi,
Please check whether you are able to open the PDF through SOST transaction.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Best regards,
Prashant

Booting thinkpad t61 without a keyboard

Similar Messages

Maybe you are looking for