Booting up a windows install
I tried to install windows 7 with boot camp but got no luck. I get asked to press any key but no key will work! Tried an aly keyboard and also normal windows keyboard. Neither of them seem to work at the caps lock light deosnt come on.
So, I installed using parallels however after choosing to install on a partition, its installed in Documents!
When I boot up and get the options on the screen, there is OSX (hd), windows (DVD) and another (DVD). Would this mean the DVD hasnt been burnt properly? it was burnt using toast.
I haven't been able to find anything on booting up a parallels install and when trying to change from image file to boot camp partition in the Parallels VM Config I get an error suggesting to check my permissions on the bootcamp drive.
any ideas!?
thanks
That on screen "Select 1: 2:" is rather well known or documented or discussed. You can use your VM to reburn the ISO back to DVD after 'fixing' it using Imgburn.
Similar Messages
-
Why can't I boot from my windows install disk using an external dvd drive?
My internal disk drive is broken on my computer, so I'm using an external one, but when I put my windows install disk in, it shows up when I'm using the computer, but it doesn't show up when I hold ALT on startup. Why is this?
Alt/Option Boot code is all in ROM. It shows an Icon for each potentially-bootable Volume.
Your Windows install DVD is not directly bootable, and so it does not show an Icon. (An OS 9 Installer CD would not show an Icon either.)
To install Windows, you need to research the use of Boot Camp, the software that provides Mac drivers and facilitates the Installation of Windows on a Mac. There are also Windows restrictions on the use of external drives which you may have to meet. -
Boot Camp problem: Windows install can't "see" USB keyboard
I just got my new iMac quad-core i5 and love it.
I tried using Boot Camp to install a copy of Windows XP, just see how it would run.
The installation went fine, until under Windows Setup I have to hit ENTER. Keep in mind, I'm using the old USB keyboard from my G5, which accepted commands up to that point; not the wireless keyboard/mouse that came with the iMac.
Nothing happens, and I have to do a hard reboot to get back out.
Any suggestions? Thanks...Macaby wrote:
First of all, I have the new 21.5" iMac (also with the wireless keyboard). I did the "Bootcamp" gig with Windows 7 WITHOUT any trouble with the wireless keyboard. Why don't you try it with the standard wireless keyboard?
After about a day of using the wireless keyboard, I plugged in a Logitech keyboard and mouse because I use the extended features (numbers) for data entry. I've asked Santa for a Mac extended keyboard as I'm not that happy about the Logitech although it works fine on the Windows side.
I should add that I used the Magic Mouse as well installing Win 7 in BootCamp. Last night I installed the new Parallels 5.0 on my MB and like it so well that I would like to have it on my iMac as well. However, I've read that there are problems having both BootCamp and Parallels 5 on the same hard drive. -
Is it possible to boot to a Windows 7 install DVD from an external USB drive on current iMacs?
On the iMac I'm currently using, a mid-2007 24-inch, it's impossible to boot into a Windows install DVD from an external drive: I can hold down option on boot, and all my hard drives come up, but if the Windows disc is in my external DVD drive, it won't show up. I'll soon be upgrading to a late 2012 iMac, and I'd like to be able to install Windows 7 for a boot camp partition. Since that iMac has no built in drive, I'd like to know if using an external DVD drive will work on that model. I'd like to do that, seems easier than messing around with disk images. But we'll see...
You can use an external optical drive to install Windows without any problem with a Late 2012 iMac.
The reason that you couldn't install Windows from an external optical drive on the 2007 iMac is that it has got an internal SuperDrive, so Apple only allows you to use it to install Windows on your iMac -
Hello,
I have been trying to install Windows 7 on my macbook pro (mid 2009, MBP53). I have successfully created a bootcamp partition using the assistant. When the computer tries to boot from the windows 7 install dvd, the screen is just black. The dvd spins for a bit, then stops and the computer is just black (no blinking cursor).
Any advice would be very appreciated.
Thanks.What kind of an install DVD are you using for Windows?
You can use any DVDs that are hardware specific. Only the full non-hardware soecific DVDs work on the Mac.
Allan -
Unable to install Boot Camp and Windows 8.1 on Mac Mini
Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
DougPoking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start. -
Boot camp assistance to install windows 8
im using a macbook pro 13-inch late 2011 with mac os x 10.7.2 which has bootcamp 4.i want to install 64-bit windows 8 on my mac.i found out you need boot camp 5 to install it.can i install windows 8 on bootcamp 4 and then update to boot camp 5 when running windows?or do i have to update to bootcamp 5 beforehand?if so,how do i do that?
From Boot Camp: System requirements for Microsoft Windows operating systems
Requirements for all Windows installations
In order to install Microsoft Windows using Boot Camp, you need the following:
An Internet connection
An administrator account in OS X to use Boot Camp Assistant
The keyboard and mouse or trackpad that came with your Mac (If they aren’t available, use a USB keyboard and mouse)
A minimum of 2 GB of RAM, 30 GB of free disk space are recommended if you are installing Windows for the first time, or 40 GB of free disk space if you are upgrading from a previous version of Windows
An authentic Microsoft Windows full install disc or ISO file
A built-in optical drive, or a compatible external optical drive is required if you are using an install disc
8 GB USB storage device, or external drive formatted as MS-DOS (FAT) to install the downloaded drivers -
Boot camp will not install windows 7?
I have a 2009 MacBook Pro with Intel Core 2 Duo; OS X 10.9.1, 750 Gb HD, Optical Drive: MatshitaDVD-R
Boot Camp support version 5.1.5640
I can not get Boot Camp to install Windows 7. It will create a partition, but gives me a
“1...2...Select CD-ROM Boot Type“ error and freezes up when attempting to install from Windows install disk in optical drive..
I created a windows7 iso file and installed that on a usb stick, but Boot Camp will not recognize that either.
Is there any way to actually use Boot Camp and Windows on this computer?Is your Windows 7 cd a full retail version?
You are using the wrong Windows Support software. Look for your computer here: Look for your computer here: http://support.apple.com/kb/HT5634
If your computer came with an optical drive you can not use a usb stick to install Windows. -
Hi!
I am getting the error:
"The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows."
I read up some on google, but all of them says that they have crated a partition and that is the problem, I only have the standard "Macintosh HD".
I tried to create a partition manually in disk utility but then the error message: "Partition failed with error message: Could not unmount disk."
Can anyone help me? It's driving me crazy.
Thanks.This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition. -
Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers. -
Can't boot into my windows pro 64 bit dvd to do clean install
I am trying to do a clean reinstall of Windows 7 Professional 64 bit (Brazilian Portuguese) I keep getting a request to select a cd-rom type 1 or 2. Neither works.
I have researched this here and on Google. All I find are references to Mac installs and changing the bios settings.
My drives are not set to AHCI - I have boot from CD/DVD first in the boot order. I did the original install of windows 7 64 bit to this same equipment and configuration with this same official windows disk without any problems. I recently began having
problems with the system after almost two years of use - efforts to repair were not only unsuccessful they left the system almost unusable. I am running the OS on a separate partition from my data.
I was planning on booting to the Windows disk and wiping the C: partiton and reinstalling but I am being prevented by a message saying that i need to select a cd-rom boot type 1 or 2. Neither works - it just goes on to boot to the present damaged OS on my
computer. I have tried typing "3" at the message - also didn't work. While I have a backup of my D: drive data I would rather not lose it and have to try to recover that as well.
I would appreciate any help - I find it really strange that the same disk I used to install the system won't work now.This may or may not be a BIOS related issue, I am only a user - but the Windows installation disk/system is certainly a MAJOR player in this problem. I booted to UBCD and deleted the c: drive to get rid of the old windows install (leaving the 100mb"system"
partition) and tried the boot again. Same problem with the Win 7 64 bit DVD. Except that when I entered "1" and "enter" it a "windows repair" window opened that appeared to be triggered from the 100mb "system" partition.
I shut down and, out of curiosity, I inserted the The Win 7 32 bit DVD and it booted. I cancelled the install and booted the UBCD and deleted the 100mb "system" partition and resized the c: partition and booted the 64 bit install disk again. This
time, when the boot asked for "1 or 2", I entered "1" and it booted and began the install. On the first reset it asked for "1 or 2", I entered "1" and it asked to "enter" if I wanted to boot from the cd/dvd
drive. I believe that I used "esc" and it booted from the hard drive and completed the install. Only the Windows install DVD creates this problem other bootable disks I have don't do this.
Since my original install was from the same disk to a new Hard Drive I didn't have any problem installing. My problems began with the need to reinstall, which is a VERY common problem with Windows. Once I found the workaround, which did not involve the BIOS
but "fooling" the Windows install/system on my official retail copy of Windows, I was able to reinstall.
Since I am using a very common, high end, if old, Intel board and processor I can't believe that others don't encounter these problems and I think that it begs the question to say that the problem is Intel related and to go to them for help.
Anyway, I do appreciate your taking the time to review my problem and trying to help. I have been as detailed as I could above in the hope that this will help any others who are encountering this problem. I would add that I am using Brazilian Portuguese
install disk and I suppose that this could be a solution only for similar disks. From what I have seen on this forum and the internet, it seems to be more generalized.
Thank-you again -
i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .
Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable. -
Hi,
I've been having this issue with a Windows 7 install.
Firstly, I have successfully installed Windows 7 before. I partitioned my HDD, held down option when booting up, booted off a USB and after a few goes it all worked fine. I didn't use boot camp assistant to install. I then proceeded to remove Windows a little while later. To do this I used disk utility to erase the partition on my HDD and but afterwards discovered my imac would continue to try to boot off the now non existant Windows partition. I solved this problem by using boot camp assistant via the "Remove Windows 7 Install" option. My imac booted up exactly as I would like it to from then on.
I am now trying to reinstall windows. I tried the way that I did it the first time but after partitioning my HDD via disk utility, inserting my USB and rebooting with option held down I am only given the option of my main HDD and my recovery drive. I have tried burning the files on the USB to DVD and booting off the disk drive by holding down C while starting up. Neither the USB or DVD are visible to be selected when I hold down option during startup.
When I try to use boot camp assistant to install I get a "No bootable device. Insert boot disk and press any key" error after the step where it partitions your HDD you. Also, my option to create an install USB via boot camp assistant is greyed out and unavailable for clicking.
Help?Fix your superdrive.
-
Boot Camp Windows install format to NTFS not working.
As a preface I am new to Apple and more complex computer issues in general. With that said I have spent several hours trying to get Windows 8.1 installed from the DVD media to a partition created using Boot Camp Assistant. I have tried several suggestions and looked through many threads, blogs and articles and none seem to have the correct answer. Below are the steps that I have followed and the issue that I run into every time.
Open Boot Camp Assistant
Select Download the latest Windows support software from Apple
Select Install Windows 7 or later version
Download support software to USB Drive (leave connected)
Create a Partition (200GB)
Hold Option on Reboot and Select Windows
Begin the Windows install process
Select Custom: Install Windows only (advanced)
Installation asks: Where do you want to install Windows?
Select Drive 0 partition 4: BOOTCAMP
Error Message Details:
Windows cannot be installed to this disk. The selected disk is of the GPT partition style.
Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS.
Solution I found from many threads is that I need to "Format" the partition. To do so I:
Select Drive 0 Partition 4: BOOTCAMP
Select Format
Select Drive 0 Partition 4 (No longer titled as BOOTCAMP after the reformat)
Error Message Details:
Windows cannot be installed to this disk. The selected disk is of the GPT partition style.
I cant seem to find a solution to this. Any help would be appreciated. I have tried removing all other connected drives and devices, and recreating the partition several times with no luck.
Machine Info:
OS X Yosemite 10.10.2
Mac (27-inch, Late 2013)
Processor: 3.2 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
I also have VMware Fusion installed on the machine and already used the Windows installation media to create a virtual machine. Is it possible to transfer my virtual machine to a Boot Camp partition? I did a little research and it looks as though thats not possible (at least not easily) but I figured I'd ask anyway.Sorry for the delayed response. I'm still working to get a solution so any help is much appreciated. Thanks.
The installation media I purchased is for windows 8.1. Is that the issue? Do I need to install 8 not 8.1?
Output for sudo gpt -vv -r show /dev/disk0:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1560546816 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1560956456 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1562225992 696
1562226688 391297024 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
Output for sudo fdisk /dev/disk0:
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 1953525167] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused -
Cannot boot from USB to install windows 7
I am trying to install windows 7 using a usb on my 2011 macbook pro. Boot camp did not allow me to check the box to use a USB but I found a work around for that. So I was able to create the USB windows install, but when I ran bootcamp it returned "No bootable device -- insert boot disk and press any key". I know that booting from a USB on the Macbook pro is not supported but is there a workaround for this? I even installed rEFIt and was able to click on the WININSTAL USB through that but I still got the same "no bootable device" error message after doing that. This is really frustrating, I already went out and bought a USB to install windows and I would rather not have to buy a DVD. Can someone please help me figure out how to reset the macbook pro's boot from the CD/DVD drive to USB?
Unfortunately you'll have to do another search, Maybe Yahoo/Google this time.
I'm guessing you did the Boot Camp Assistant .plist hack for the USB W7 installer? Did you try adding your <boot rom> version, farther up the list. I think a couple of people got it to work but can't be sure.
Maybe you are looking for
-
Bad performance on system, export/import buffer many sawps
Hello, I have an ECC 6.0 system on AIX with 6 application servers. There seems to be a performance problem on the system, this issue is being noticed very well when people are trying to save a sale order for example, this operation takes about 10 min
-
Why can't I see thumbnails of .PSD's in Windows 7?
I've always been able to see them in previous versions. Anyone?
-
ITunes gets frozen when connecting Ipod to Dell Laptop! Help!!!
Whenever I connect my Ipod Nano to my Dell Laptop, the iTunes appears and gets frozen. When I disconnect it, the iTunes works normally. I connect the Ipod, the iTunes does not work. What do I do????
-
Control Adobe Reader browser plug-in programmatically
Is it possible to control the size of the Adobe Reader Browser plug-in programmitically? I would like to be able to: 1) Reduce the size of the plugin, so that I can use the botton half of the browser to display other information. 2) Change/Reload/S
-
Log exception 'iView not found: style.css'
We keep seeing the following exception in our server (EP6 SP2)logs but have no idea what is causing it? Any ideas as to what it relates to and how to fix it? Cheers, Steve [code]Exception ID:02:44_02/08/05_0063 com.sapportals.portal.prt.runtime.Porta