Booting Win2k w/nano connected disabled ps/2 mouse

I recently purchased a 4gb nano and installed the software that came on the CD as well as downloaded the latest iTunes.
My problem is that if I have the nano connected via USB when I boot my computer, my ps/2 mouse is not detected. I must disconnect the nano and reboot my computer in order to be able to use the mouse again.

Quote
Originally posted by Lord_Yazid
Sounds like it, i got kt-266a with same error cant use both keyboard & mouse... its been working flawlessly about a year :(
I rma it... still waiting for the new board...
Good luck
What does it mean: " use both keyboard & mouse"? I can use them, everything is fine, but the boot..
And I have this bug for ages. I know an other guy who has this error. So I think this is a bug in this type of mobo, not an error in mine.

Similar Messages

  • PC does not boot with Ipod Nano

    My configuration:
    Shuttle SK83G, Athlon64 3000, Windows XP Pro, Logitech DiNovo wireless desktop.
    My problem:
    If my Ipod Nano is connected the PC will not boot. The bios screen shows up and then nothing happens. I even can not access the bios. If I remove the ipod the PC will eventually start windows. But in absolute slow motion (I can see how the Windows startup screen fades in step by step).
    If I connect my Nano after booting, everything is perfectly fine. Also with my Ipod Mini connected, the PC boots up without a problem.

    it's not just a Nano problem, but a USB port problem
    That's correct. USB is famous for this. Something in the BIOS (probably) is telling it to try and boot from the nano, but of course it can't find a valid OS there. And the solution is just what you suggested. Don't boot with the nano connected.

  • Windows won't start with Nano connected

    My computer won't startup or restart with the nano connected to the USB port. It just hangs on the startup screen. I have to disconnect the nano and do a hard power off and then power up again then connect the nano after computer is started. Everything works OK then. Is this normal? Using Dell 8500 laptop with XP Pro sp 2.
    Dell Laptop 8500   Windows XP Pro   sp 2

    I have the same (or similar) problem with an iPod Video 30GB, and have found a solution. It is not a boot order problem. I've just posted the following as feedback to http://docs.info.apple.com/article.html?artnum=93953
    There is also another reason why a PC may not start with an iPod connected. It is also related to USB, but is a different problem, and there are different work-arounds available.
    Problem: PC will not POST or boot with iPod connected to a USB port
    Description:
    With an iPod connected to any USB port, the PC will not pass power-on self test (POST), and does not attempt to boot. It remains completely unresponsive to anything except a hard power-off; in particular it is impossible to reach the BIOS configuration screen. This is not a problem with the boot order: the internal disk is first in the boot order, and in any case, POST is not passed and so booting is not attempted.
    With the iPod disconnected, the PC boots normally, and if the iPod is plugged in later, the iPod and iTunes function normally.
    Solution: either:
    1. Disable "USB legacy mouse support" and "USB keyboard and legacy support" in BIOS. Disabling legacy USB mouse support stops a USB mouse being used by BIOS and DOS programs, which is not usually a problem. Disabling "USB keyboard and legacy support" will prevent a USB keyboard from being used at all, which is a potentially serious problem.
    2. Boot with the iPod disconnected.
    System details: a PC based on the ASUS A7N8X v2.0 motherboard running BIOS version 1008. It has a USB mouse, PS/2-compatible keyboard, and a USB-connected printer and scanner as well as the iPod.
    Comments:
    This is not necessarily a bug with the iPod, but may be. There are three possibilities:
    1. There is a bug with the BIOS implementation of USB keyboard and mouse support
    2. There is a bug with the way the iPod responds when the BIOS is looking for USB keyboards and mice.
    3. There is a bug in the USB spec itself.
    Homebrew PC Windows XP ASUS A7N8X motherboard

  • 4 Nano Connection Questions

    I have an old 20GB iPod w/dock connector (the one with the 4 buttons above the click wheel). The dock came with both a USB 2.0 cable and a firewire cable. I've been using the firewire cable, although I think I can find the USB cable that came with it.
    I just got a new 3rd gen Nano. I haven't opened the box yet (it's a gift), but I understand that it comes with a USB 2.0 cable.
    Questions:
    1. Will the Nano fit in the old dock?
    2. Can the Nano connect using firewire rather than USB, and if so, will it charge (the old iPod charges OK through the firewire connection)?
    3. If a firewire connection will work, but the Nano won't fit in the dock, will the old firewire cable connect to the Nano?
    4. The Nano specs say "USB 2.0". Other than slower transfer speed, will Nano work with a USB 1.0 port or is a USB 2.0 port required?

    I think I've found the answer to one of my questions.
    The firewire-to-dock cable will work to charge Nano, but not for sync. That suggests that the firewall cable will connect directly to Nano, and probably also that the Nano will fit in the dock, but that can be easily determined once I unpack Nano.

  • BIG nano connection problem

    I got my iPod Nano delivered today & after it finished charging I installed the software that is on the CD.
    My problem is that when i connect my Nano using the USB cable it doesn't show that it is connected in iTunes or My Computer or the iPod for Windows software update which means I can't choose to restore the Nano but my PC does make a ringing-type noise everytime i connect it.
    What is the problem with it? When you install the software do you have to format the iPod? Because when it says to connect it to check if it does need formatting nothing happens so i clieck on the box to not check & carry on to install the software & have my songs added to the iTunes library. I have done this 2 or 3 times but still can't find out how to make my Nano connected so i can finally download my songs onto it!
    I remember when i first connected the iPod a Windows message popped up saying 'found new device ipod' & said connect to internet to find updates for it to which i clicked on no. Then when i tried again later it said 'found new device Mass USB Device' & this time i clicked on the Windows message to find updates & it said something like aborted could not be done.
    Can you please help me with this? I'm only 16 & have saved up for this & don't want it to be a waste of money!
    Thanks hope this makes sense because I'm really tired!

    I recieved my ipod nano and for 2 glorious days it worked. Then my pc could no longer detect it, it just said "malfunctioned usb device" and didnot appear in itunes. The Nano just has the menu as opposed to the "DO NOT DISCONNECT" screen
    After a long and arduous day i managed to fix the problem.
    By clicking on this link http://docs.info.apple.com/article.html?artnum=93651 it tells you how to fix it.
    i just did this - (with the ipod connected to the pc)
    1) turn hold on, and then off,
    2)then press menu and the center select button simultaiously for 6 seconds
    3)the apple logo appears
    4)then it goes back to the menu briefly, and then goes to the "DO NOT DISCONNECT" screen
    5)open itunes, wait a minute and your nano will appear
    Wahooooo!
    hope this helps everyone!
    Ben

  • My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    Shootist007 wrote:
    If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
    Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad.  Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS.  Just maybe right genius?  Don't rush to criticize someone's recommendations until you realize other possibilities.  (I did say "if it does")
    Thank you

  • Does the new IPOD Nano connect with the bose docking stations?

    Does the new IPOD NANO connect with the Bose docking stations?

    hi
    Yes it does. just bought a Bose. But make sure you have no cover on your Nano as it will not connect!

  • When booting up, the bluetooth connects and then disconnects with my trackpad 3 or 4 times then i get a gray cover over the desktop that drops from top to bottom then a window that tells me to use the power button to do a forced shutdown.

    when booting up, the bluetooth connects and disconnects with my trackpad 3 to 4 times and then i get a gray sheet that drops down from the top to bottom of the desktop then a box in the center that tells me to use the power button to do a forced shutdown. wireless keyboard connects with no problem. went to the apple store and they replaced the bluetooth card. still have the same problem. removed the batteries from the trackpad, strted up and no problem connecting with wireless mouse and keyboard. anyone else experience this?

    This could be a software/state problem or a hardware problem.  Here are steps to resolve the former.
    http://support.apple.com/kb/TS2570
    https://discussions.apple.com/docs/DOC-5282

  • How do I connect disabled iphone to itunes

    How do I connect disabled iphone to itunes

    Use Recovery Mode, as described here:
    http://support.apple.com/kb/ht1808

  • Nano connects and disconnects

    Hi
    My nano connects ok but after 10 seconds from connecting, it disconnects. I have tried formatting, factory sets and stuff, but no luck. After it disappears from My Computer, it still shows on the itunes, but the songs dont transfer.

    order? in other words have you used your USB port for another USB device with no problem before?
    maybe ( just a guess your USB port is wonky.
    On one of my computers the port on the front doesn't fully work but the ones on the back do work fine.
    suggestions:
    ~ try a different USB port IF you have multiple ports.
    ~try another USB device ( like an external drive or card reader) IF YOU HAVE ONE on the suspect USB port and see if it works.
    ~ re-seat your USB cable --(remove it and plug it in firmly)
    good luck, BobF

  • Data connection disabled automatically & issue on social networking

    I hv Lenovo A7000-a with latest firmware upgrade but I can't connect data in 2g Vodafone India(Bhubaneswar). I can't use WhatsApp,fb,twitter and other applications in 2g network.I can't sent messages even don't receive messages in WhatsApp, fb,twitter & some other apps like taht..sometime data connection disabled automatically. I can't connect with other phone hotspot using wlan but some of phone can connect me with my hotspot.... This problem persists in my phone in xender,share it and wlan sharing with my friends... Why this happened that I don't know but I know that from which time I last est update the new system version I am facing this problem.

    Hi usman34,
    If you are having an issue with keeping a good cellular data connection with your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    iPhone cellular data connection issues - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • IPod nano connect to iTunes

    我有一些 i-pod nano connect 問題想請救
    我部i-pod已經用唔到差唔多半年
    因為一直同iTunes connect唔到 ..
    我一將USB連接落電腦.. 初頭i-pod係有反應.. 會自動connect..
    但過一陣佢又會自動disconnect.. 唔知點解..
    請看以下圖片.. i-pod公仔黑左.. 最頂仲寫著 "iPod同步已完成, 可以斷線" .. 即是怎樣?
    http://i61.photobucket.com/albums/h75/cocotte813/dd3dbeb9.jpg
    但好奇怪.. 雖然i-pod唔可以用iTunes同步.. 但我插左USB落電腦i-pod的叉電功能是正常的.. 佢仍然可以叉電.. 咁關唔關條USB問題..
    另外, 請看以下圖片.. 我發現USB一連接落電腦.. 裝置管理員其中一個"USB Mass Storage Device" 就會有個感嘆號出現
    係咪因為咁樣所以connect唔到?
    但我對電腦既野好水皮.. 唔識點樣整走個感嘆號..
    http://i61.photobucket.com/albums/h75/cocotte813/2.jpg
    如果有人知道可以解決呢個問題.. 希望幫下我..
    依家個i-pod就黎擺到封塵 -__-
    我真係好希望救得返..
    thanks!

    Does the iPod appear in the Finder on your Mac's Desktop?
    B-rock

  • Lenovo a7000-a Data connection disabled automatically & issue on social networking

    I hv Lenovo A7000-a with latest firmware upgrade but I can't connect data in 2g Vodafone India(Bhubaneswar). I can't use WhatsApp,fb,twitter and other applications in 2g network.I can't sent messages even don't receive messages in WhatsApp, fb,twitter & some other apps like taht..sometime data connection disabled automatically. I can't connect with other phone hotspot using wlan but some of phone can connect me with my hotspot.... This problem persists in my phone in xender,share it and wlan sharing with my friends... Why this happened that I don't know but I know that from which time I last est update the new system version I am facing this problem.

    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.Check the following log file for more details about the error:
    $APPL_TOP/admin/$CONTEXT_NAME/log/installAppl.log

  • LAN Problem in Windows 2003 Server (LAN connection disabled)

    I have installed LAN in Windows 2003 Service. But it shows LAN connection disabled.  LAN connection is also proper. 
    I asked local vendor, he told me that it may due to virus problem. i do not want to format the machine against. i have very much useful data in it. 
    Kedar 

    Hi
    Do you mean you have plugged in the network cable to the server and the network card showing disabled.
    If its disabled in the network and sharing then you need to enable it.
    If you can't see any network connection in the network and sharing form control panel then check if the network card driver has installed properly.
    if you can see the network connection then simply right click and enable them.
    Thanks
    Umar

  • My macbook pro(Lion 10.7.2) continually lost connection with the magic mouse, which charged well.

    There is something wrong with my new macbook pro MD322(Lion 10.7.2). It continually lost connection with the magic mouse. I ensure that the mouse is charged well. I also looked up the matter on Web. It looks that the matter is familiar for many users.

    I have a m-audio fast track pro that I'm having a similar problem when using it with my new Macbook Air. I found changing it to 16 bit will work.
    I have a Apogee iMic that works fine so my guess is we will have to wait for Avid/M-Audio to update drivers.

Maybe you are looking for