BOOTLOADER UNLOCK BUT PCC and SUS is also detecting is phone model(Neo V)
One of my friend unlocked bootloader in unofficial way.Right now he installing custom Roms at his will and wish.
The most remarkable thing is that PCC and SUS is also detecting is phone model(Neo V).He is downloading official rome by SUS and PCC.
Further after dialing *#*#7378423#*#*...he gets ...... Bootloader unlock allowed says Yes.
How is this possible??
Solved!
Go to Solution.
There are some unofficial ways in which DRM files are not lost after unlocking the bootloader.
But unlocking in unofficial ways is not that easy, Moreover you could brick your device permanently if anything goes wrong
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.
Similar Messages
-
I had downloaded latest version of IOS and installation failed. Now my phone is in recovery mode and my itune cannot detect the phone.
if you have tried ALL suggestions then your phone is obviously broken beyond reparing by user
but if you might not have then you can try reading these
https://discussions.apple.com/message/21571280#21571280
http://www.techisky.com/how-to/easy-fix-iphone-in-recovery-mode-upgrading-to-ios -6-2.html
more
restore iphone error 36 -
I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.
Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.
-
I recently got an ipad and am having great success with that. It shows and syncs everything it's supposed to, but my calendar is not syncing with my iphone and also doesn't show up in icloud. Just a side note.....my reminders sync on icloud, iphone and ipad just great. I am only having problems with the calendar. Please advise if anyone has any ideas. Thanks.
If new calendar events added to your iPad do not appear on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar and make sure this is set to iCloud. If it isn't, make this change, then add a new event and see if it appears on your calendar on icloud.com now.
If your settings are correct but new events still won't sync, you'll have to add any missing events from your iPad calendar to your calendar on icloud.com. When the calendar on icloud.com is up to date, go to Settings>iCloud on your iPad, turn Calendars to Off, choose Delete from My iPad when prompted, then after a minute or so turn Calendars back to On again. Then add a new event on your iPad and confirm that it syncs to icloud.com now. -
Hi ,
how can i stop the my iphone to verify an email address for icloud.
i went to that email but did not let me verify....phone is now stuckDid you click the Verify Now link in the verification email from Apple? If you didn't get it, make sure you are checking the email address you used to set up your iCloud account. Check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
someone please help me
What is currently showing on the screen?
Have you tried a reset by pressing and holding the Home and Sleep/Wake buttons?
In the future, it might be best to leave other peoples devices alone. -
I forgot my password now its dissabled
It might be helpful if you told us what the error message says...
-
T2 ultra dead unable to flash through flashtool and pc companion doesnt detects the phone .
hello, my xperia t2 ultra (dual) suddenly started giving bootloop, there after i did a soft reset but nothing happened..i tired todo a hard reset by pressing all three buttons at a same time untill it vibrates 3 times. but instead the phone died now nothing happenes i have connected it to charger its been 30 mins the red led blinks continously. before when i connected to flashtoolfor flashing ftf file the tool gave error cannot flash like this "Processing of loader.sin finished with errors" the phone connects in fastbbot mode showing purple led but doesnt stay in flashmode the green led blinks for a second and goes away flashtool shows device connected in flashmode but while flashing again gives the error "Processing of loader.sin finished with errors" please help me guys what should i do next?
O tried that first solution you gave me and that is: "Connect your phone to wall charger>Press&hold power plus vol up for 10 seconds>ley it charge for 3 hours."But after that nothing happened. It did not boot. While charging and pressing that power+vol up for more than 20 seconds it just blinks twice and after I let it charge the red light is gone.Im on Locked Bootloader I'm not unlock.Can't seem to flash this phone. When i press vol down when connecting to flash tool or Pc companion it doesent detect it. at all.Then windows shows installing drver but wasn't able to finish it. What is happening please help.
-
My iphone 5 is stuck on recovery mode and itunes is not detecting my phone when pluged in
My iphone 5 is stuck in recovery mode and the phone is not being detected by itunes when the lead is pluged in, this all started when i was trying to update the phone to latest software any ideas????
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I just got a new computer and it won't detect my phone or even connect! What can I do?
Apple won't help me because I don't have complementary coverage or whatever the heck it is somebody help me!!!!
Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again. -
I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.but the result was same. now what can i do??
BobbyLe wrote:
I could not follow the AT&T instruction because my network (Optus) doesn't have anything as username or password or dial-up phone number. The only parameter I needed to key into Mobilink (the software I am running on the S10 is the APN which is: connectme that's it no number, no PIN, no password, nothing else.
How do I tell Windows to do that?
*99***1# <--- the number to call
at+cgdcont=1,"ip","connectme" <----- the string to put in the advanced field of the modem -
My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?
Hi Mikki.J.H,
Thanks for using Apple Support Communities. This article has some information regarding SIM PINs that may help:
iOS: Understanding the SIM PIN
http://support.apple.com/kb/ht1316
Cheers,
- Ari -
My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work
-
Hi can anyone help ihave just changed my iphone 4 from vodaphone to Virgin vodaphone say the phone is unlocked but i cannot connect to virgin and the seem powerless to help - any ideas
some more info which would most likely help...
i am in south africa and currently on the mtn network,network is fine as no one else is experiencing internet problems.
also currently after doing everything i could think of,my iphone 4s is now just saying searching constantly....no service whatsoever no matter what i do.
super fruuuuuuussssstratiiiingggggg!!!!!!!!!! -
I'm also having a music issue. When my phone is attached to the computer (mac running 10.6.8) it looks like my music is there but its gray and I can't play anything. I've tried to delete it and it won't let me but it does not show up on my phone.
By the way, I have tried shutting of the display switching in the power settings. That was basically the only real answer I found anywhere. It didn't work.
Maybe you are looking for
-
Problem with child objects created in custom tree data descriptor
I have a set of AS objects that must be represented in a tree. Some of them are branches with various numbers of children while some are leaves. The branches can have additional branch or leaf children. One type of node in particular, let's call them
-
Single Piece 2GB ram for macbook pro 17" 2.16Ghz works?
couldn't find the answer. was wondering if anyone has an answer to the above question? hoping to upgrade my MBP (1st version) to 3GB ram
-
How do I get Lion NOT to open previous documents when I open any of my software?
My Macbook opens the last document in MS Word, Excel, Pages etc, or the last window in Safari. HOw do I get it to go to my homepage or the regular first window? I have tried unchecking the box in the Shutdow
-
How to monitor jobs' submits - removals
On 9i I want to monitor when users create or remove jobs. I was thinking to create a trigger on sys.job$ table to catch any inserts/deletes occur in it and then write an entry on a log table, but I got an error: ORA-04089: cannot create triggers on o
-
Credit management at Delivery level
Hi, I am having an problem as My client is asking for credit limt block, at PGI level in delivery. But the condition is that it should be only for certain Plant only.. Is it required to be done with the help of ABAP to write a code in program...or w