BOOTMGR is compressed in my macbookair bootcamp partition!
I somehow managed to compress the hardrive and when I went into bootcamp the screen turned black and says "BOOTMGR is compressed. Press Ctrl+Alt+Delete to restart". Unfortunately whenever I press ctrl+alt+delete it does restar and remains on the screen. I can't even access my mac partition. Is there any way to fix this?
If it is not giving you access to your mac partion either, there isn't much you can do.
I would try to insert the windows disk into your superdrive/external optical drive, restart, and then use whatever recovery options are available, if nothing happens, I reccommend taking to a technitian who works with windows pc's and macs
Similar Messages
-
Success: moving bootcamp partition to an external drive
Background
Due to the relatively small, non-exchangable SSD on my Mac, I'd limited the bootcamp partition to 50GB when installing Windows. I needed to install new software in Windows, but was running out of space fast and didn't have the necessary space on the Windows side. I don't use Windows that often and for that reason, I wanted to move the Bootcamp partition to an external hard drive, freeing up space for the Mac side on the internal SSD. I'd read many conflicting reports on the web, some claiming they'd done it successfully, while others said it would be impossible, because Windows 7 wouldn't run from an external drive. I had a HDD in a USB 3 enclosure, and first tried to install Windows to this (using various guides on the web). I was very close to success with this USB 3 drive, but Windows would fail during start-up. Most reports claiming to have successfully been able to run Windows 7 from an external drive, had used Thunderbolt drives, so I decided to get myself a Lacie Rugged USB 3/Thunderbolt series Solid State Drive.
Hardware used
MacBook Pro 15" Retina Display (mid 2012), 2,3 GHz Intel Core i7, 8GB RAM, 250GB SSD
Lacie Rugged USB 3/Thunderbolt series, 120GB Solid State Drive
Software used
Mac OS X Mavericks, 10.9.2
Windows 7 Ultimate
Plus several free downloads from the internet, see description below.
Procedure
Step 1: Get the Thunderbolt drive to work under your Bootcamp Windows 7 installation.
This should be simple enough, but proved to be a little tricky. Here’s what I did (assumes you are running Mac OS X before you begin):
1. Make sure your Thunderbolt drive is disconnected before proceeding.
2. Restart your Mac and hold down the option key (alt key on some keyboards) during startup.
3. Choose the Windows drive to start up Windows 7 on your Bootcamp partition.
4. After log in to Windows 7, download the necessary driver software for your Thunderbolt drive (find it at the manufacturer’s homepage of your Thunderbolt drive - in my case lacie.com).
5. If the downloaded driver installer is in a compressed format (like zip for example) be sure to decompress it before running the driver installer.
6. Shut down your computer.
7. Connect your Thunderbolt drive to your computer.
8. Start up in Windows 7 (see items 2 & 3 above) and if it all went well, you should now be able to see your Thunderbolt drive under Start>Computer.
Step 2: Format your Thunderbolt drive in NTFS-format.
Still running Windows 7 with your Thunderbolt drive connected and visible to the system, it is now time to format your external Thunderbolt drive in NTFS-format. There are several ways of doing this. I used the procedure described here at tedhhack.co.uk.
Step 3: Follow the directions at intowindows.com to clean install Windows 7 onto your external Thunderbolt drive.
As described at intowindows.com, this involves downloading Windows Automated Installation Kit (WAIK) and running command line tools. At step 9 in the described process at intowindows.com, at the point where the installer asks if the drive you are installing to is a USB hard disk, the correct input is Y for yes, even if your external drive is a Thunderbolt drive (and obviously not a USB hard disk).
At step 10 in the described process at intowindows.com (Reboot your PC), remember to hold down the option (or alt) key at every restart in the installation process, so as not to start up in Mac OS X. Also, since your machine now has two Windows 7 installations, Windows Boot Manager will appear and ask you to “Choose an operating system to start” and there is a list of two Windows.
I don’t know how to tell which one is on the external drive and which one is on the internal drive at this point, but I started with the top one on the list and this turned out to be the one I wanted (the newly installed one on the external drive). If you pick the wrong one (on the internal drive) at first, simply restart the computer and choose the other one. You know you got the right one when the installation process continues and asks for further input.
After the Windows installation is complete (there will be at least one other restart required - remember to hold down the option (alt) key to start up in Windows, and choose the same Windows on the list in the Windows Boot Manager), you’ll be running a freshly installed, but crippled Windows 7, as you still haven’t installed the specific drivers for your hardware. But don’t worry, that will be fixed in the next step.
Step 4: Clone your Bootcamp partition from your internal drive to the external Thunderbolt drive.
In this step you will copy all the software, drivers, settings and other files from your Bootcamp partition on your internal drive to your external Thunderbolt drive. The easiest way to do that is to clone your Windows partition - and to that end you’ll need to download some free software: AOMEI Backupper Standard 2.0 fits the bill perfectly, as it will let you clone at the same time as resizing the partition to fit your external Thunderbolt drive (I went from a 50GB internal Bootcamp partition to a 120GB external Thunderbolt SSD).
1. Download AOMEI Backupper Standard 2.0 (I used the 17MB download for Windows 7), install it, and run it.
2. In the left column choose “Clone” and in the right column choose “Partition Clone”. By choosing Partition Clone instead of Disk clone, you won’t ruin the newly created (but invisible) boot partition on the external Thunderbolt drive.
3. Press Next and choose your internal Bootcamp partition as the Source Disk.
4. Press Next again and choose your external Thunderbolt drive (your newly installed Windows 7) as the Destination Disk.
5. Press Next again and you’ll get a warning that you will erase the contents of the destination partition and it asks if this is what you really want to do. Press Yes to this question.
6. Next screen is an Operation Summery. Toward the bottom of the Operation Summery screen there are a few interesting options: Edit Size of Partition, Clone Sector by Sector and Align Partition to Optimize for SSD.
7. If your destination partition is larger than your source destination like mine was, press Edit Size of Partition. This will take you to another screen, where you can drag to resize the partition. I dragged this all the way to the right to give Windows 7 the full size of my external Thunderbolt drive.
8. Leave the checkbox Clone Sector by Sector unchecked.
9. If your external Thunderbolt drive is an SSD, put a check in the checkbox entitled Align Partition to Optimize for SSD.
10. Now press the Start Clone button.
11. When the cloning process is done, exit AOMEI Backupper and restart your computer (holding down the option or alt key) to start up in your new clone of your old Windows 7 with all the same software, drivers, settings and files.
Step 5: Enjoy running all your Windows 7 applications from your external Thunderbolt drive!
Step 6: Here is where I need help/advice – can I remove the Bootcamp partition on my internal drive now?
I am reluctant to entirely remove the Bootcamp partition from my internal drive, as I am unsure whether this will disable me from starting up in Windows. I would love to hear from anyone here with insight on the matter.Step 6: Here is where I need help/advice – can I remove the Bootcamp partition on my internal drive now?
To answer my own question in Step 6 above, no, or at least I haven't found a way yet...
Here's what I've done so far:
Used the Bootcamp Assistant to remove the bootcamp partition on my internal drive.
Booted the system with the option (alt) key pressed down and now there was NO Windows drive to choose.
Therefore I used the Bootcamp Assistant to install Windows back onto my internal drive (including installing Bootcamp drivers in the Windows environment). This time I chose the minimum partition of 20GB for the Windows installation on the internal drive.
Booted into the new Windows on the internal drive and installed the drivers for my Thunderbolt drive.
Restarted with the option (alt) key pressed down, chose the Windows drive, but Windows Boot Manager still didn't pop up to allow me to choose the Windows installation on the external Thunderbolt drive.
Booted from the Windows DVD and chose Repair.
Restarted with the option (alt) key pressed down, chose the Windows drive, and now Windows Boot Manager finally popped up, which allowed me to choose the Windows installation on the external Thunderbolt drive again, phew!
So, I can run Windows 7 from the external Thunderbolt drive, but I have to use 20GB of my internal drive for a Windows installation I'll never use. Not the best solution, but at least I've saved 30GB of space compared to my previous Bootcamp partition - and I now have enough space to install the Windows 7 software I need on the external Thunderbolt drive... -
Bootcamp partition is no longer visible and bootable
I decided to change size of my bootcamp (windows partition) by following steps in this thread:
how to resize my bootcamp partition without deleting itit
I ended up with having bigger windows partition (which is what I was trying to achieve), that I was able to boot to, but my Windows disk was no longer seen in OS X. I reviewed the thread above once again and it was pointing to another thread where folks were discussing issue similar to mine:
Repairing Boot Camp after creating new partition
Bottom line - Unfortunately, after performing the suggested action plan, I am no longer able to boot to my windows partition nor to see it from OS X
(I am able to select Windows disk while hitting Alt/Option during the boot, but then I get the message 'A Disk Read Error Occured. Press CTRL+ALT+DEL to restart')
Please see the diagnostics below and please advise how this could be fixed - at minimum I would like to boot to Windows partition again, maximum - also to access it via OSX as well.
GycioMPB:~ gytis$ sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=320072933376; sectorsize=512; blocks=625142448
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 625142447
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 531562496 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
531972136 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
533241672 27345080
560586752 64555008 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
625141760 655
625142415 32 Sec GPT table
625142447 1 Sec GPT header
GycioMPB:~ gytis$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 38913/255/63 [625142448 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 25 127 14 [ 1 - 409639] <Unknown ID>
2: AF 25 127 15 - 1023 254 63 [ 409640 - 531562496] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 531972136 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 560586752 - 64555008] HPFS/QNX/AUX
GycioMPB:~ gytis$ sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 625142448 sectors, 298.1 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 000066EB-7670-0000-C052-0000E7240000
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 625142414
Partitions will be aligned on 8-sector boundaries
Total free space is 27345741 sectors (13.0 GiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI system partition
2 409640 531972135 253.5 GiB AF00 Customer
3 531972136 533241671 619.9 MiB AB00 Recovery HD
4 560586752 625141759 30.8 GiB 0700 Win HD
Command (? for help):
Thanks!Hi Loner,
please see the output:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 e0 69 21 |........?.....i!|
00000020 00 00 00 00 80 00 80 00 f8 07 d9 03 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 99 bf 2f fc e2 2f fc d2 |........../../..|
00000050 8c 92 fe 64 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |...d.3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
So do you think there are there any chances of fixing it?
Though it is sad that resizing of bootcamp is not supported natively (by Disk Utility?) as it seems a lot of people would like to have this. -
Bootcamp partition Black Screen of Death after restore from DMG file + mbr rebuild
I have a 2012 Macbook Pro 15", and my hard drive died the other day. Thankfully I had a bitwise copy (non-compressed DMG file) of my Bootcamp partition from that morning via Disk Utility, and I had all of my Mac data backed up through Time Machine.
The new disk was installed with the factory default Mac OS. I was told to try and restore the Windows partition before I restored my Mac partition. I spent all weekend and the past two days trying to restore my Windows... I took it to the Mac store and they said this was "not in their skill set to assess".
First through Bootcamp I installed Windows 7 (I still have the original install disk!), then I restarted in the Recovery partition (that comes with Mac) to load the DMG file onto the Bootcamp partition. I had to load the DMG file into the source files on the left of Disk Utility by clicking it twice, and then selected all the files as the source image in the "Restore" tab of the Bootcamp drive, and the Bootcamp partition as the destination. Everything went smoothly as far as I can tell.
Here's where things go south. I restart, after the image is loaded onto the Bootcamp partition, into Bootcamp and I receive a "Missing Operating System" error.
I then run through all of the bootrec.exe functions
bootsec.exe /nt60 all /force (which resulted in "Bootcode was successfully updated on at least one volume.")
I ran DISKPART to flag the partition as active and navigated to Partition 4 (Bootcamp) and the readback was
"Partition 4 Type : 07 Hidden : No Active : Yes Offset in Bytes : 320108232704 Volume # - Volume 1 Ltr - C Label - BOOTCAMP Fs - NTFS Type - Partition Size - 165 GB Status - Healthy"
chkdsk C: /f went well too if I remember correctly.
The only part that keeps my hopes up is that from Mac I can see all of my Windows files, it recognizes the Bootcamp partition, and everything is right in place. Any help is greatly appreciated! Also if anybody knows a better way to restore Bootcamp from a DMG please let me know! Thank you so much in advance for any feedback you may be able to provide. I can boot from my Windows installer and run any commands, and terminal is a thingRunning "sudo gpt -r -v show /dev/disk0" gives the following
gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: /dev/disk0: Suspicious MBR at sector 0
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 623531456 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
623941096 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
625210632 760
625211392 346185728 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
971397120 5376015
976773135 32 Sec GPT table
976773167 1 Sec GPT header
Running "sudo fdisk /dev/disk0" gives
Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 623531456] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 623941096 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 625211392 - 346185728] HPFS/QNX/AUX -
Parallels unmounted BOOTCAMP partition, I cant remount, cant use BC or Para
This is a crosspost from the parallels support forums. Nobody has responded there and I have tried a few more things and all have failed, desperation is rising.
I hope someone here has some kind of idea what might be going on because I have some very valuable data on my boot camp partition and I did not expect a trial of Parallels to destroy it...
I tried installing the Parallels trial version of Desktop 6. For some reason it would not ID my boot camp partition and said that I had to mount it using the disk utility. I thought this was strange but didn't think much more of it. I continued to use my computer for other purposes for about an hour and decided I wanted to head back to my BOOTCAMP side, so I restarted into Windows and recieved "Disk read error, press ctrl +alt +del" from the DOS prompt. Restarted a few times and continued to get the same error.
I returned to OSX and discovered that my BOOTCAMP partition no longer appears on my desktop, or as an option for Startup Disk. If I start Disk Utility, I see my OSX partition, and then I see my BOOTCAMP partition, but now it is unmounted (greyed out) and reads "disk0s3". Attempts to mount it have been unsuccessful. If I try the same from the terminal I receive "Volume on disk0s3 failed to mount".
I attempted to use Parallels to read the drive to at least recover my important documents but when I pointed it to the (what used to be) boot camp partition, the virtual machine reported "no OS installed on this drive".
In some research in the issue, I read something about MacFUSE or NTFS-3G locking down the mount abilities of the drive. Someone is having a similar issue as me here, for example. Finder does see a folder with one file called "ntfs-3g" in /opt/local/var/ in a FUSE folder, but other than that I see no indication of ntfs-3g being installed. Not only that but I attempted both uninstalling and installing MacFUSE from System Preferences. In both cases I could still not mount the drive or boot to my boot camp partition.
Please help! I'm really at my wit's end here and I am horrified at the thought of losing all of my data.
No idea if this helps but here is diskutil info on the partition
Some further research indicates there may be an issue with MBR? This is getting far out of the realm of my expertise so I would have no idea where to start investigating.
Device Identifier: disk0s3
Device Node: /dev/disk0s3
Part Of Whole: disk0
Device / Media Name: BOOTCAMP
Volume Name:
Escaped with Unicode:
Mounted: No
File System: MS-DOS
Type: msdos
Name: MS-DOS (FAT)
Partition Type: Microsoft Basic Data
Bootable: Is bootable
Media Type: Generic
Protocol: SATA
SMART Status: Verified
Total Size: 125.3 GB (125294346240 Bytes) (exactly 244715520 512-Byte-Blocks)
Volume Free Space: 0 B (0 Bytes) (exactly 0 512-Byte-Blocks)
Read-Only Media: No
Read-Only Volume: Not applicable (not mounted)
Ejectable: No
Whole: No
Internal: Yes
More information, from rEFIt:
* Report for internal hard disk *
Current GPT partition table:
# Start LBA End LBA Type
1 40 409639 EFI System (FAT)
2 409640 243417127 Mac OS X HFS+
3 243681280 488396799 Basic Data
Current MBR partition table:
# A Start LBA End LBA Type
1 1 409639 ee EFI Protective
2 409640 243417127 af Mac OS X HFS+
3 * 243681280 488396799 07 NTFS/HPFS
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 243681280:
Boot Code: Windows BOOTMGR (Vista)
File System: NTFS
Listed in GPT as partition 3, type Basic Data
Listed in MBR as partition 3, type 07 NTFS/HPFS, active
I have also tried booting from ubuntu live CD (which did not work and resulted in a very scary loud sysbeeping and flashing of the front LED). Then I tried booting from win7 CD. That may still be a viable option but I need to find a USB keyboard because the stock mackbook pro keyboard seems to not send input when i am prompted for "press any key to boot from CD/DVD".
I also tried uninstalling parallels and installing VMWare Fusion. Fusion also does not detect the BOOTCAMP partition. It doesn't see it at all. Assuming this is because it is still unmounted.
I do not care if I lose my install, I will probably want to do clean installs of both leopard and win7 after this is all over. But I really do need to recover my data. If anyone knows of a utility that can browse unmounted NTFS volumes locally from OSX, I will buy you a thousand peachy penguins.
Message was edited by: emtheoryStill no definitive solution but a few updates.
I was able to boot off the win7 DVD. Apparently I was not slamming the keys fast enough the first few times. I selected the option to repair an installation of windows, but it couldn't identify any NTFS partitions. At that point I decided any hope of booting from this partition was lost, and I may as well just focus on data recovery. I found a tool called FileSalvage which sweeps partitions, mounted or unmounted, and looks for the signature of known file types. It can then restore those files. I believe I should be able to restore most of the files I need with this type of tool, but unfortunately it costs $80. I am still looking for any similar DIY or freeware solutions. -
How do I ensure bootcamp partition works after upgrading snow leopard to mountain lion
I am very apprehensive about upgrading to Mountain Lion due to performance concerns and the debacle with the new Auto Save feature which seems like a very poor and confusing solution to a problem that didn't really exist. I am only considering the upgrade, so that I can get the latest version of Xcode - 4.3; for some reason, 4.2 for SL is no longer available and my current 4.0 version is no longer supported, so I feel forced to upgrade to ML. Also, I have a bootcamp partition that I need to be able to use without issues after having upgraded to ML. So the essence of my question is this: what steps do I need to take prior to upgrading to ML to ensure that my Bootcamp partition is left intact and bootable. I have already created a compressed backup disk image and stored on a separate external hard disk for precautionary reasons. Is there anything else I should know beore going ahead with the upgrade?
Thanks.Auto Save is actually a very useful feature. If you are typing a paper in Pages and you haven't saved in a long time, and then your battery dies suddenly, your paper is saved. Before Auto Save, you would have lost all your progress.
Your BootCamp partition will not even be touched during the install of Mountain Lion. As long as you make sure to select your Mac OS partition during setup, nothing will happen to your Windows side and everything will still work fine. -
Bootcamp partition lost after moving to larger HDD (Mavericks and Win7 X64)
Hi Folks!
I read those topics concerning lost and broken bootcamp partitions and I am Wondering if someone may help me.
What was my aim: Due to lacking space of my 320 GB HDD I moved to a 750 GB HDD.
I did this by installing Mavericks from a USB disk and rebuilt it with TM. After the installation I had a fully working Mavericks partition and the MacOS recovery partition.
Next step was to rebuild the Bootcamp partition. For that I installed a new copy of windows via bootcamp assistant. After booting up the first time I booted the mini partition wizard cd, deleted the bootcamp partition and rebuild the partition from the old HDD changing the size fitting to the available space. After rebooting I chose to boot from the Win7 DVD and chose the repair option to fix windows. Everything worked well, I could boot into Win7 and it showed me both partitions (Mavericks and bootcamp).
BUT
when i boot into MacOS it is not able to mount the mavericks partition.
After checking it with fdisk and disk I found out that the bootcamp partition was recognized as FAT32 by the disk utility program, which always told me that it was not able to repair the bootcamp partition.
So I followed Christopher Murphy's instructions to change the type for FAT 32 (0C) to ntfs (07) with the effect that I can't boot windows anymore due to "operating system not found" error.
So this is what the refit partition inspector tells me about my HDD:
*** Report for internal hard disk ***
Current GPT partition table:
# Start LBA End LBA Type
1 40 409639 EFI System (FAT)
2 409640 731457695 Mac OS X HFS+
3 731457696 732727239 Mac OS X Boot
4 732727296 1465147391 Basic Data
Current MBR partition table:
# A Start LBA End LBA Type
1 1 409639 ee EFI Protective
2 409640 731457695 af Mac OS X HFS+
3 731457696 732727239 ab Mac OS X Boot
4 * 732727296 1465147391 07 NTFS/HPFS
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 731457696:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot
Partition at LBA 732727296:
Boot Code: Windows BOOTMGR (Vista)
File System: NTFS
Listed in GPT as partition 4, type Basic Data
Listed in MBR as partition 4, type 07 NTFS/HPFS, active
This is the info got gives to me:
sudo gdisk -l /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Disk /dev/disk0: 1465149168 sectors, 698.6 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 3AA6D384-5EC7-48C6-B593-4513AFF55241
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1465149134
Partitions will be aligned on 8-sector boundaries
Total free space is 1805 sectors (902.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 731457695 348.6 GiB AF00 Macintosh HD
3 731457696 732727239 619.9 MiB AB00 Recovery HD
4 732727296 1465147391 349.2 GiB 0700 BOOTCAMP
philipp-3:~ Phil$ sudo gpt -r -vv show disk0
Password:
Sorry, try again.
Password:
gpt show: disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1465149167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 731048056 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
731457696 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
732727240 56
732727296 732420096 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392 1743
1465149135 32 Sec GPT table
1465149167 1 Sec GPT header
This is what fdisk gives:
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 731048056] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 731457696 - 1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 732727296 - 732420096] HPFS/QNX/AUX
And this is a photo of the disk util (in german)
And this is the error when I try to check it:
Next step is to try to cover the windows copy. I guess startup repair will work, unfortunatly I have no DVD at the moment right here.
But my problem is not the restoring of windows but to mount the bootcamp partition in Mavericks again.
Any help?
Thanks in advance
PhilOk, it works again. But actually I don't know why. After neither startup repair nor mini partition manager could repair the ntfs partition, i deleted it and rebuilt it from the old HDD (fortunately not deleted yet). The only thing I did in difference was to boot into Mavericks before starting startup repair after i copied the partition. For any reason Mavericks recognized it this time. I have no clue why but everything is working.
So far... -
Can I install Windows 8.1 as Bootcamp partition from OSX Mountain Lion using a USB stick?
I have the following:
Bootable USB stick with Windows 8.1 - 64 bit
MacBook Pro with Mountain Lion 10.8.5 - it's probably 3-4 years old.
The Bootcamp partition currently has Windows 7 installed.
I want to know whether I can install Windows 8.1 from a USB stick into a Bootcamp partition. Apple's article on the topic refers to Bootcamp 5.1, but my OSX install has Bootcamp 5.0 - I am assuming 5.1 comes with the Mavericks version. I don't want to upgrade to Mavericks because I am running out of space as it is on the OSX partition.
Thus my question. So can I?Your laptop has a DVD drive, right? If so you need to burn your ISO to a disc, will not work off USB
-
Upgrading MacBook Pro Hard Drive - cannot get Bootcamp partition to work
Hello,
The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't really sure about cloning my Windows partition. Originally, my 320 GB hard drive had 2 partitions: 220 GB for OS X Mavericks, and 100 GB for Windows 8.1.
I bought the new drive with an external enclosure and plugged it in. The first thing I did was open Disk Utility and partitioned the new hard drive (750 GB HFS+, 250 GB NTFS). I figured I would need to partition it first and clone each partition separately. I used Carbon Copy Cloner to clone the OS X partition, and it worked with no problem (I immediately could restart my computer and boot with the partition on the new drive, while it was still plugged in by USB).
Next, I tried using CCC to clone the Windows partition the same way (I realize now that CCC cannot do this). 7 hours later, the cloning was complete, but there was an error that a couple files couldn't be copied. I tried copying them manually but it didn't work. I wasn't sure if the Windows partition would work, so to find out, I switched the hard drives and put the old 320 GB one in the external enclosure. I booted my computer and it booted the new OS X partition with no problem. It also mounted the Windows partition that I cloned with CCC, and I can access all of the files in it. However, when I restarted and held down "option", it would not let me boot the Windows partition.
After some googling, I realized CCC is not able to clone a bootcamp partition and make it bootable, so I opened disk utility and deleted the Windows partition (using the minus button), then recreated it (using the plus button). I downloaded Winclone (paid $30), which supposedly can clone a bootcamp partition. I opened Winclone and it seemed pretty simple: you just choose the source partition on the left, and the target on the right. I plugged in the USB enclosure with my old hard drive, and in the Winclone menu the original Windows partition popped up. I chose that as my source, and chose to copy it to the new NTFS partition on the new drive that I created. I left it on overnight, and when I woke up it said it was completed.
I now had two drives mounted: my NTFS partition that I created, and a new one that said "EFI". I have no idea what EFI is. My NTFS partition looks like it has all of the files from my original Windows partition on it; however, when I restart it does not allow me to boot with it, although I now have the option to boot EFI. When I select EFI, I am given the Windows 8.1 start up screen (with the blue Windows logo), but then an error message pops up saying something like there is an issue and it needs to restart (it restarted before I could read the whole thing).
When I boot in OS X, I only have the NTFS partition (with all my Windows files) mounted, and no EFI. When I restart, I can still boot EFI, but I always get the same message and then it restarts.
Is there any way I can fix my Windows partition so that it works the same way it did on my old drive? What is EFI? Can I delete it? How can I make the NTFS partition, which seems to have all of my files, bootable? I only want 2 partitions: one for OS X, and one for Windows. Also, can I do all of this without having to reinstall either of the operating systems?
ThanksHmm, that's a good question!
I headed over to the twocanoes website (the folks that make Winclone) and their guide mentions something about running Sysprep before you create the Windows image. If you skipped that step, that may be why you're having issues
http://www.twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-wi nclone/
Step 24 in that guide also mentions copying a Boot file - were you able to/did you do that?
You may have better luck over in the Bootcamp forum, which is here.
~Lyssa -
I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so. -
How can I restore Windows 7 to Bootcamp partition - not reformat the entire hard drive?
Hello Apple (Mac) Community,
I originally posted this question over on answers.microsoft, but no help was forthcoming. Hope someone can help me with a problem that's (almost) making me nuts! I teach graphics to college students. In brief: I run Windows 7 Pro 64 on a Mac Pro tower, along with Snow Leopard (OSX). Windows is loaded on one partition of a 1TB drive. The other partition is a Mac backup. The Mac OS is on a different drive. Everything was going swimmingly with both OS, until recently. Unfortunately, the drive with Windows showed problems and I determined that the HD was either toast or needed a total reformat. My Mac data was all backed-up. Now I wanted to backup Windows so I can easily get back to the relatively happy point of my Windows 7 experience (drivers loaded, dual monitors all working, etc.). I did some online searching and the recommendation was to create a "system image" of the existing Windows 7 install by attaching an external drive, formatting that to NTFS and selecting "backup to image" in Windows. I did that and also took the opportunity to "create a backup disc" on a DVD. (Windows recommended). Next I rebooted back to Mac OS and completely reformatted the problem 1TB disc to a single partition, zero all data, just to see if it would actually reformat. It all worked! So far, so good. Next I used Bootcamp to create two partitions, one for Windows. I then restarted using the Win7 Pro (64) install disc, reformatted the Bootcamp disk to NTFS (as required) and installed Windows 7. After all that is completed and all working, I next try to use the restore from image function while booted in Windows. I'm instructed to restart from the Win install disc, which I do. Here's where things get difficult. When I try to choose restore from image, at that point the installer asks which drives to I want to exclude... but does not show partitions, only full HDs. I do not want to reformat the entire 1TB drive. I only want Windows on the 120gb Bootcamp partition (which is already formatted for Windows BTW). I spent a lot of time online reading through articles with users having the same frustration.
So here (at long last) is my question: How can I either restore Windows just to a Bootcamp partition... using "Windows System Image" or if that can't be done... can I somehow import all of the settings, etc. from the "image" (image is on external HD) into a fresh Win 7 install? So far the "backup disc" also seems useless. I can't even boot to Windows from it. BTW Apple folks: the only response on the MS side was that some "expert" simply posted links on how to install Windows and restore... not helpful with my particular problem of restoring to a partition.
Any help would be appreciated! Hopefully some help that even a Mac user / new Windows user could understand would be better! Thanks!
-meltWinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays. -
Upgrading MacBook Pro 13" (mid-2010) HDD with Bootcamp Partition
I'm upgrading my macbook pro's hdd from 250 gb to 1tb. My OS is lion 10.7.5 and i also have windows 7 installed on my bootcamp partition.
The following are the details to the HDD i plan to buy.
Samsung Spinpoint M8 1 TB Laptop Internal Hard Drive (ST1000LM024) -
2.5 inch Form Factor
SATA 3.0 Gbps Interface
1 TB HDD
5400 RPM Spin Speed
I need your advice on if i m buying the correct hard disk. If not please advice me one.
And please also tell me how i should upgrade my hard disk. I know how to physically install the drive but i ask of you to tell me how to clone my current hard disk with my bootcamp partition. Which software to use, precautions to take etc.
MacBookPro 13" (Mid-2010)
Processor 2.4 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software Mac OS X Lion 10.7.5 (11G63) and Windows 7 Ultimate on bootcampThose are the correct RAM modules for you model (the 13" being the only mid-2010 model that can use 16GB of RAM - but those modules will surely get you to 8GB!).
Am I right in assuming that you want to purchase a SSD to be installed in your boot bay and that you want to install the Samsung drive in the optical bay? Unfortunately, your link points to a rather sparse description of the drive - I see the 2.5" but I don't see the depth (which should be 7-9.5mm and not a mm more).
I'm just unclear about whether you're looking for a new spinning drive as well as a SSD and whether or not the drive will fit (just a minute - OK, found some more info - the Samsung drive is 9.5mm so it should sit just fine in your machine: do you still want a SSD?).
Note that the 2TB Samsung probably won't speed things up much - it's a 5400rpm drive: if you could use a 1TB drive, you could get a faster, 7200rpm drive.
Clinton
MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display -
VMware Fusion Performance: Bootcamp Partition or Virtual Machine?
I'd like to run ArcGIS 9.3 in Windows XP using VMware Fusion. Can anyone comment on the virtues/drawbacks of using a bootcamp partition versus creating a VMware "Virtual Machine"?
With bootcamp partition I can gradually increase the size of the partition as the partition becomes full using Drive Genius, correct?
What about performance?
Thanks!Visit MacTech.com and read their two benchmark reviews of Parallels, VM Fusion, and Boot Camp.
You cannot "gradually increase the size" of a Boot Camp partition. To change the size you must first delete the existing partition then create a new, larger partition. Doing so will delete the entire Windows system, so be sure to back it up beforehand. -
Recovering bootcamp partition - is there a solution that works?
Dealing with bootcamp issues after a Lion upgrade seems to be a common problem with no agreed solution.
When I upgraded my iMac to Lion, the upgrade process couldn't create a recovery partition so Apple support advised me to use Disk Utility to create a small (5 GB) block of free space on my harddisk for the recovery partition to use and then to use Disk Utility to enlarge the OSX partition again to recover whatever remaining free space was left after the Lion upgrade had completed.
This I duly did. However, after I enlarged the OSX partition using Disk Utility to recover the free space I found that a) the Bootcamp partition had been renamed "disk0s4" and b) when holding down the Option key when booting, the Recovery option was now labelled "EFI Boot" and appeared to boot from the regular OSX partition. Attempting to boot windows in Bootcamp results in a "missing operating system" error message.
I'm not so worried about the recovery partition as I have a bootable DVD and USB flash drive.
What I would like to do is recover some files from the Windows partition. There is a lot of opinions in the Apple suport forums about what works such as, booting Windows from the install disk and running the "fixmbr" and "fixboot" commands or using rEFIt or BootPicker (which doesn't seem to work on Lion).
Is there a reliable approach to fixing this problem so that I can at least read the contents of the partition, even if I can't boot from it? If I can't actualy recover the partition I'm not too fussed, so long as I can get the data off it.
Thanks...MacsWhy do you suggest installing Lion on an external h/disk? Is this because of problems with Lion or just suggested standard procedure?
Some of the options may work although I am unable to mount the partition at all (in OSX or by booting from a Linux live CD and trying to mount it from there) so I'm not sure how far any of them will get.
I haven't tried booting from the Windows DVD as yet.
If I run Verify on Disk Utility I get this:
2012-03-20 22:18:41 +1100: Verifying volume “disk0s4”
2012-03-20 22:18:41 +1100: Starting verification tool:
2012-03-20 22:18:49 +1100: Checking file system2012-03-20 22:18:49 +1100: ** /dev/disk0s4
2012-03-20 22:18:49 +1100: Invalid BS_jmpBoot in boot block: ba9a97
2012-03-20 22:18:49 +1100: Error: This disk needs to be repaired. Click Repair Disk.
2012-03-20 22:18:49 +1100:
2012-03-20 22:18:49 +1100: Disk Utility stopped verifying “disk0s4”: This disk needs to be repaired. Click Repair Disk.
Repair disk says this:
2012-03-20 22:31:06 +1100: Verify and Repair volume “disk0s4”
2012-03-20 22:31:06 +1100: Starting repair tool:
2012-03-20 22:31:12 +1100: Checking file system2012-03-20 22:31:12 +1100: ** /dev/disk0s4
2012-03-20 22:31:12 +1100: Invalid BS_jmpBoot in boot block: ba9a97
2012-03-20 22:31:12 +1100: Volume repair complete.2012-03-20 22:31:12 +1100: Updating boot support partitions for the volume as required.
2012-03-20 22:31:12 +1100: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2012-03-20 22:31:12 +1100:
2012-03-20 22:31:12 +1100: Disk Utility stopped repairing “disk0s4”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
I wondered whether the entry in the partition table had been completely screwed so I had a look with FDisk and GDisk.
GDisk says this about the partition table:
Disk /dev/disk0: 976773168 sectors, 465.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): FB4FA8FD-D192-4589-93E1-A19A9F0F29D7
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 8-sector boundaries
Total free space is 13 sectors (6.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 869550263 414.4 GiB AF00 Customer
3 869550264 870727719 574.9 MiB AB00 Recovery HD
4 870727720 976773127 50.6 GiB 0700 Untitled
And this about partition 4:
Partition number (1-4): 4
Partition GUID code: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 (Microsoft basic data)
Partition unique GUID: 94C06328-9817-4012-9C30-C97592E671C1
First sector: 870727720 (at 415.2 GiB)
Last sector: 976773127 (at 465.8 GiB)
Partition size: 106045408 sectors (50.6 GiB)
Attribute flags: 0000000000000000
Partition name: 'Untitled'
For its part FDisk says:
Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] Unknown ID
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 869140624] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 869550264 - 1177456] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 870727720 - 106045408] HPFS/QNX/AUX
From looking at the Fdisk and GDisk output I cannot see where the problem is occurring (although I know 2/5ths of stuff all about partition tables). I notice that the Bootcamp partition is now lacking a name although I don't know whether this matters or not and strangely FDisk identifies it as an HPFS filesystem whereas Disk Utility identifies it as MSDOS (FAT). -
Bootcamp partition shows up as grey "disk0s4" in Disk Utility
Hello everyone,
So I am a few days into this tiring and discouraging process of trying to get my iMac back to it's original working state. Here's to hoping for a solution:
Ever since I bought my iMac, I've been running OSX Mountain Lion with Win7 installed through BootCamp, without any problems. I recently wanted to increase my Boot Camp partition size from 80GB to 149GB because I was running low on disk space, and that was the start of many problems to come.
Here's what I tried first:
Make a backup copy of my OSX partition through Disk Utility's "Restore" tab (onto external HD 1)
Make a backup copy of my Windows partition through "Create a system image" in Windows Control Panel (onto external HD 2)
Use WinClone to backup a copy of my Windows partition
Erase Boot Camp partition in Disk Utility
Resize Mac OS partition to max
Create new FAT partition (149 GB)
Restore WinClone backup to the FAT partition (hoping it'll "fill up" the remaining free space)
I don't remember all the details, but all of this led to Windows not being able to boot properly, and then soon after, OS X wouldn't work either. The built-in Recovery HD somehow became unusable and showed up as grey in Disk Utility (too chaotic to remember how). After much trial and error, I was left with the Mac's built in Internet Recovery option, which I used to reinstall OS X Mountain Lion (on top of the existing Mac partition). Afterward, I regained the Recovery HD, and resized the Mac OS X partition to cover over the unusable free space that remained.
After that:
Ran Boot Camp Assistant to start the Windows installation process from scratch.
After the installation finished, I used "System Image Recovery" from a bootable Windows Recovery USB that I created.
Upon restart, Windows would not boot (which was fixed using the bootrec commands within Command Prompt off the USB).
This allowed Windows to boot fine, and it was exactly as it was before this all began.
Now, here are my current problems.
I believe the simplest way to achieve my original goal of extending my Windows partition would be to use Paragon's Camptune X, but upon running it, it tells me it can't find any Bootcamp configuration on my system.
While both OSX and Windows appear on the Startup Manager when I hold down the "option" key (which boot and run just fine), the "BOOTCAMP" partition that I would normally see in Disk Utility (under Macintosh HD) is now listed as "disk0s4", is grey, and "unmounted". It's also listed as MS-DOS (FAT), while it shows up as NTFS within Windows.
The Startup Disk preference pane lists Macintosh HD as the only choice.
I'm exhausted from the past week of repeated backup/reinstallations and trying to make this work. I've done my share of research and reading related forum threads, with no real solution. I am hoping "The hatter" will see this, as he's offered much info/advice on this topic on these boards, but I still haven't been able to resolve this issue.
Thanks for reading, anyone have any ideas?By using Disk Utility to try to resize your Bootcamp partition you messed up your hard disk. You need to backup all your data from the disk, eraze and format your disk, and reinstall OSx, then if you want a new Bootcamp partition run Bootcamp Assistant.
Next time you want to resize the Bootcamp partition use CampTune, not Disk Utility.
Maybe you are looking for
-
My iPad has been disabled, seemingly permanently. I do not get the temporary disabled message. I have no idea how it became disabled. When I connect it to iTunes, I am told I have to enter a passcode on the iPad to unlock it, but all the display on t
-
Itunes will not sync photos to ipad 3 properly
Problems I've had since ipad 3: I download and install latest itunes i tell it to restore from backup of my ipad 2 - it fails, it simply does not give me the choice to pick my ipad 2 restore, so i end up doing new setup. i tell itunes to slectively b
-
I want to exclude a storage location from MRP
I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands. Also repair storage location stock should not be calculated against 'stocks' term in MD04. How to do this
-
Two identical profile in system preference – display – color?
Hello to all. I am a new Mac user and I would ask for clarification. My hobby is photography. When selecting a different color profile in the Display preferences pene in system preferences I noticed that I have two profiles with the same name (for e
-
Hi, I am getting following error when I log into portal. This users is having only Employee self service role in portal and SAP_Employee_ERP and SAP_Employee roles in the backend. I tried assigning all the possible roles in the protal , I am able to