BOOTMGR Missing during reimage

Been having trouble with my Satellite P755-S5120 for a while. It would turn off randomly while I was using it, and turn off or restart during boot up. So I backed up my files on an external hard drive and started the process to restore to factory condition. I got to the point where the Toshiba Recovery Wizard was up and running, initializing the process, when the laptop shut down. I waited a few minutes and nothing happened, then finally it restarted with the message "Bootmgr missing press ctrl+alt+del to restart"
Did a little research and found that if I had the Windows install disk (I do) I could repair my pc by booting from the cd. I see that to do this I need to go into the BIOS and change my settings to boot from CD. Problem is, when I turn on the computer it goes immediately to the bootmgr is missing, so I can't get to the BIOS to change the setting.
So, is there any way I can bypass this to get to the BIOS? Or any other steps I could take to get the system restore process going again?

Usually if tapping F2 doesn't work to get into the BIOS, try holding it as you start the laptop. You should also be able to get to the boot menu by tapping F12 or holding F12 as you start the laptop.
- Peter

Similar Messages

Notebook shows BOOTMGR missing after running return system to factory condition

I have a HP Pavilion Entertainment notebook Model #dv7 3163cl. First I need to say I am a beginner user. My problem started with a low battery issue. Then using recovery mgr. I first ran back up disks and then attempted system restore. During which it shut off. When I tried to restart it it originally said something about starting like new from factory. Then said unable to load windows program. I contacted hp and tech had me purchase a 1 year phone support plan. Then had me go th the recovery manager and select restore to factory image. During which it gave this message. Recovery Manager could not restore computer using the fzctory image. Please contact HP support. Error code 0xe0ef0003. He said that meant I need a new hard drive. Now when I turn it on it says BOOTMGR Missing. Use ctrl apt Del to start but that does not work. It does nothing. Could the tech be right? Is there a way I can check my disk first? Or another way to tell? It wasn't the original problem so I'm not confident in his determination. Should I be?
This question was solved.
View Solution.

Immediately after powering on tap the Esc key. This should bring up a menu of which F2 is what you want to choose. Use Diagnostics to test your hard drive.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Satellite M300: bootmgr missing after Recovery has failed

I tried to reinstall Vista using Toshiba recovery disk... when i tried to do it took long time to copy files and then it asked for next disk.
Even after inserting 2 disk it still asks for insert next disk... I had no choice and i cancelled it...
When i booted again it said bootmgr missing
'CTRL+ALT+DELETE' to restart
I stuck up don't know what to do.
pls tell me sme suggestions

Hi
The error bootmgr missing appears because the Recovery procedure hasnt finished and the old bootmgr was destroyed.
It looks like your second DVD is not readable for no apparent reason.
Maybe you could try to recover the notebook using the HDD recovery option.
Maybe the partition was not damage during the recovery procedure from DVD.
So press F8 after notebook was powered up. Choose first option called Repair my Computer. Choose last option Toshiba Recovery and try to recover the notebook from HDD.
If it doesnt work then you could boot from the original Vista DVD and could try to repair the boot manager.
In worst case you would have to reinstall the OS from the Microsoft Vista DVD or you will order a new Recovery DVD from Toshiba.
Good luck

Bootmgr missing

After i press power button, monitor still blank and there are some text "bootmgr missing" "press ctrl+alt+del to restart".
I am doing "press ctrl+alt+del" but this is not working. How to fix this problem? Help me please...

Thank for you Mr. ERIK.
I use Lenovo ThinkStation S20. Intel Xeon E5502 Processor (1.86GHz 800MHz 4MB).
4 GB DDR3 SDRAM. 250GB SATA HDD. NVIDIA Quadro NVS250 256MB. Genuine Windows Vista Business 32bit. DVD Recordable. Keyboard, Mouse Lenovo.
best regards
SALMAT - from Indonesia

Bootmgr missing after recovery discs

Hello,
So I have recently had to factory reset my laptop which wiped everything clean including losing a restore point. I purchased the 3 recovery discs from HP 2 x Win 7 recovery media DVD's (Part 1 and 2) and the application and driver recovery DVD.
When going through the restore process the 2 recovery discs were absolutely fine whether the app and driver DVD was ejected after 5 seconds saying the computer didn't need it and it would be recovered from the hardrive. When I press finish and it restarts itself the screen goes black and comes up with a message saying "BOOTMGR MISSING CTRL + ALT + DEL to restart".
The order of the boot menu is the internal CD/DVD ROM first then the hardrive which I worked out in the BIOS menu.
Not sure what to do next especially as it doesn't want to accept the app and driver dvd. And have tested the HDD and Memory both passed no problem. I have tried removing the HDD and rehousing it then retesting it but made no difference to result.
Help!

HI @Grantc42 ,
Welcome to the HP Forums!
It is a terrific place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you tried to do a recovery from the disks supplied by HP after the first two it informed you that the remaining two were not required and would be recovered from the hard drive. The boot order is set to optical drive first and hard drive second. When you tried to boot to the hard drive you received the error ""BOOTMGR MISSING CTRL + ALT + DEL to restart. You have tested the hard drive and memory and no issues were found
Try changing the boot order to hard drive first
Restore the defaults from the bios screen. This will allow it to scan for the attached hard ware.
If the issue remains, I would try a full recovery one more time and if the issue remains contact HP support for further assistance.
HP PCs - Performing an HP System Recovery (Windows 8)
HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

BOOTMGR missing ( no data on laptop can be found)

Hi, I've purchased an HP Pivillion G6z notebook PC a month ago and my lil nefhew accidently knock down my laptop. it's shut down right away after that i try turing it back on again and again but the white letter keep showing up " BOOTMGR missing" I've tried to find many possibles ways to try and fix it but i chouldn't. I log into hp home site and try to fine the solutions and i have but the problem is that i do NOT think i have gotten a Recovery CD or anything. i've read many solution and all it's lead me to is the "recovery CD" so how do i get a recovery cd? how much does it cost? please help.

Hi,
I would suggest trying the following procedure first of all - this should tell you whether there is a physical ( ie Hardware ) problem with the notebook of if the operating system just needs to be reinstalled.
If you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your original OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself on another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD CD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Does this install Ok?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Some Condition types missing during extraction from 2LIS_11_VAKON

Hi,
I am extracting conditions data to BI from ECC through 2LIS_11_VAKON. This datasource uses the fields from table KOMV. The Field KSCHL (Condition type) is also being taken from KOMV structure.
My problem is some condition types are missing during extraction. Say, for example, for a Document condition i have 22 Condition types in KONV table but when i extract the data to BI, nearly 7 conditions are missing, i am getting only 15 condition types for the same document condition in BI.
Why is this happening? I dont have any filters set. Moreover, this is happening in the Datasource level itself.
Please advice. Any help on this is highly appreciated.
Regards,
Murali

Hi Murali,
try to have the manual check with set of data..there must be some mistaken in And and OR logic.
Thanks,
Deepak

Satellite U205-S5057 reformat error : BOOTMGR missing

hi,
I am trying to reformat the hard drive of my Satellite U205-S5057 using the Toshiba recovery disks. When i first booted with the recovery disk i chose the out-of-the-box factory default reformatting option. After it had finished erasing all the data, it rebooted and started copying files from the recovery disks. I got this "BOOTMGR missing" error when i was told to insert the second disk. The Hard drive is good - has been working fine till now. My guess is this is some sort of software issue related to the reformatting. Any suggestion?
I read somewhere i should try copying the recovery disk because it might fix the error. Is that right? Also, the disks are apparently DVD formate, is it possible to download the recovery software on a CD (since i only have CD R/W and DVD R/O)
Thanks
Liz

I bought Toshiba A200 - part no. PSAF6A-02J01N - serial no. 77100112Q in September 07.
I have made a recovery disk of the system onto DVD (2 in total - ie disk 1 and 2), prior to using / installing personal software in my new notebook. I had much difficulty in "seeing" other Windows XP computers on my existing network (I am using Linksys Wireless/Wired router). The XP computers can "see" my Toshiba but can not share or access the Toshiba data, which is running Vista Home Premium.
The more I changed the network settings, the slower my Toshiba appeared.
I did a reinstall using the Toshiba recovery but that failed and I could no longer get back into the Windows Desktop.
When I used the recovery DVD I had burned from this laptop earlier, I followed the menu, which made me delete all data and partition. This step was successful. However, after a long period of copying files from the recovery dvd no.1, I got the message: "Recovery Error 10-FC06-0002" . It never asked for the 2nd DVD!
Other attempts included wiping the partition using the recovery DVD. At one time, I got the message:
Yukon PXE v5.17.2.3 (20061031)
Pre-boot eXecution Env (PXE) v2.1
PXE-E61 Media Test Failure, check cable
PXE-M0F: Exiting PXEROM
I tried to install WXP professional from an orginial DVD but it would not install - saying that XP setup did not find any hard disk drives installed in the computer!
Steven
*EDIT*
Have solved the issue installing the Intel Matrix Storage Manager firstly ;)
Thanks to all!

Libjil.iso missing during run time?

Hi all,
I am new one to jes. I setup jes in Raspbian on Raspberry machine. libjil.iso is missing during run time. Please help me how to resolve the issue.
Thanks a lot.

try to adjust ur repeating fram which prints ur data in ur report.
some of ur data overlaping that's y it cannot display . most of the time character mode reports generate this error. simply adjust ur repeating fram up and down where it fits u problem will solve.
tnx.

More 'Bootmgr missing' problems

Hello,
What am I missing? I have a Toshiba Satellite A215-S7462 with Windows Vista. It gives me a 'BOOTMGR is missing' on start up. I have no Toshiba disks. I can get into command prompt using a generic recovery disk found online. If I try the start up-repair option, it does not find the Vista operating system. It appears that the partitions (C:, Boot-X, E: Toshiba System Volume) seem to be intact and occupied. I have tried the 'hold zero and power up' and it gives the same 'bootmgr missing' message. I have tried to research it several places and none of the 'fixes' work. Is there something that can perhaps be done from the command prompt to recover the machine? I am not really concerned with saving the old data, just in getting back a working machine. ANY suggestions or direction will be appreciated. Sid

Well, I tried, anyway. The only thing I seem to find on this forum are reports of 'lack of customer support' by Toshiba, which will, at least, stand me in good stead when I choose my next computer (which may not be long at this rate<G?>). I have the hard drive mounted in another computer and all the directories/files, WinPE, TOSIMG, etc seem to be available, but what to do with them from here or the command prompt is another question. The final report in the repair log file is "Root cause found: --------------------------- Boot manager is missing or corrupt." Just where it is, was or should be is well beyond me. Can it be found or reconstructed anywhere with the hard drive or must I do a format and new install? Again, thanks and any ideas appreciated. Sid

Bootmgr missing no access to recovery disc

I was doing a recovery on a compaq and after it completed formatting I selected re-boot and got the error message bootmgr missing. I'm at a complete loss at what to do . I don't have any recover or repair disc and have no way to create one because i dont have another device with widows 7. Any suggestions on what to do would be greatly appreciated!!!!

Please order Recovery kit for your model using which you can restore the system to original factory settings. Refer the following link for ordering procedure:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&lc=en&cc=us&dlc=en
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Bootmgr missing dv7t-4100

Have a dv7t-4100 whose disk drive would crash after 10 min of play when I first got it. Calling inti support didn't help and I didn't worry about it because I don't really use it.
So a year later my computer crashes and recovery wouldn't go past classpnp. So hp warranty sent me a new hard drive.
Now it'll go through the 2 recovery discs and ejects them. Then the final phase it freezes @a 12%. If I restart it, the bootmgr is missing. I've tried changing where it reads the cd drive first. I can get to system restore/repair before the bootmgr missing screen pops up. How do I repair this?

Try the following process.
Download and create the bootable CD as described on the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en
When you have created this CD, insert it into the system that is unable to boot, restart it and wait until you see a window with a green check mark. Then remove the CD. Shutdown the notebook and start it again with no Disc inserted in the CD/DVD Drive. Then insert your first Recovery DVD. Restart the notebook and go through the process of installing the Operating System again.
If the above fails to correct the issue, post back with the full version of the operating system you are trying to install ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

BOOTMGR Missing - Looping restart

I refromatted my hard drive and am trying to reinstall from the restore disks I ordered from HP. I keep getting "BOOTMGR Missing Press ctrl-alt-delete to restart". I have tried everything from using the HP Disks to a Dell restore disk but within a few seconds the power goes out and it restarts the process over again. This loop continues even when I look at the bios or any other function. Within 5 seconds, the power will shut off and it will come back on. I can hear the CD running and when I eject it, the disk is spinning so I am assuming the drive is okay. Any ideas?

I guess maybe your boot order is not correct in terms of booting from cd rom drive first.
Look in bios or use the quick access key (google for details) to bring up a boot selection option menu if supported on your model.
Like my post? Click Kudos (thumb+) to show appreciation.

Bootmgr missing error

i get this when im at last part of windows restore the third check mark it freezes at 19 % and then comes up with this error c:\RM\image\TempBASE.WIM contains an invalid path i also have a bootmgr missing error when i try to boot windows. how can i fix these please help thanks

i am having the same issue with my laptop so you are not alone it is very frustrating. i had to order the discs from hp it was 16.25 but i still get the same message

Formatted volumes. now bootmgr missing. no install cd no backup cd

hi
compacq presario cq60 notebook running windows 7 pro. wont start up. black screen says windows but no logo. friend formatted volumes then after restarting, bootmgr missing message on screen. no install or recovery disks. what can i do? pressing f8 doesnt work. please help
This question was solved.
View Solution.

Formatting volumes (partitions) removes the operating system and recovery partition. I don't see that as an viable recovery or repair strategy.
Contact HP to order a recovery disk set. The cost is usually @ $25.00 USD
How to order a recovery disk set
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

BOOTMGR Missing during reimage

Similar Messages

Maybe you are looking for