Bootmgr missing error

i get this when im at last part of windows restore the third check mark it freezes at 19 % and then comes up with this error c:\RM\image\TempBASE.WIM contains an invalid path i also have a bootmgr missing error when i try to boot windows. how can i fix these please help thanks

i am having the same issue with my laptop so you are not alone it is very frustrating. i had to order the discs from hp it was 16.25 but i still get the same message

Similar Messages

Bootmgr missing error for windows 7 home basic

Hi;
I want to restore my laptop to the factory setting because all the network drivers are currupted and could not fix the laoptop. but i attempt to restore to factory setting i am fascing the bootmgr missing error...i do not have any bootable cds..
following are the details of my laptop:
Os: window 7 home basic
Model notebook: HP pavilion dv6 notebook PC
system board ID: 1658
Processor type: intel(R) core(TM) i5-2430M CPU @2.40GHZ
any help will be appriciated
regards
khalid khan
This question was solved.
View Solution.

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
Please indicate if the system recovery ran and completed or you were unable to even initiate the recovery. depending on the exact issue, you may be able to repair the "bootmgr missing" error using a Windows 7 installation DVD. If you need a Windows SP1 disc, please see "How to Install Windows 7 Without the Disc" to download and create your own. If you have created this disc, you can boot from it and select "Repair" to attempt to fix the current issue.
Select Repair Your Computer. After several screens you will arrive at choices. Select Command Prompt. Type bootrec /RebuildBcd. Next type Exit
Select 'Startup Repair' and allow it to run. Restart the laptop.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Satellite U205-S5057 reformat error : BOOTMGR missing

hi,
I am trying to reformat the hard drive of my Satellite U205-S5057 using the Toshiba recovery disks. When i first booted with the recovery disk i chose the out-of-the-box factory default reformatting option. After it had finished erasing all the data, it rebooted and started copying files from the recovery disks. I got this "BOOTMGR missing" error when i was told to insert the second disk. The Hard drive is good - has been working fine till now. My guess is this is some sort of software issue related to the reformatting. Any suggestion?
I read somewhere i should try copying the recovery disk because it might fix the error. Is that right? Also, the disks are apparently DVD formate, is it possible to download the recovery software on a CD (since i only have CD R/W and DVD R/O)
Thanks
Liz

I bought Toshiba A200 - part no. PSAF6A-02J01N - serial no. 77100112Q in September 07.
I have made a recovery disk of the system onto DVD (2 in total - ie disk 1 and 2), prior to using / installing personal software in my new notebook. I had much difficulty in "seeing" other Windows XP computers on my existing network (I am using Linksys Wireless/Wired router). The XP computers can "see" my Toshiba but can not share or access the Toshiba data, which is running Vista Home Premium.
The more I changed the network settings, the slower my Toshiba appeared.
I did a reinstall using the Toshiba recovery but that failed and I could no longer get back into the Windows Desktop.
When I used the recovery DVD I had burned from this laptop earlier, I followed the menu, which made me delete all data and partition. This step was successful. However, after a long period of copying files from the recovery dvd no.1, I got the message: "Recovery Error 10-FC06-0002" . It never asked for the 2nd DVD!
Other attempts included wiping the partition using the recovery DVD. At one time, I got the message:
Yukon PXE v5.17.2.3 (20061031)
Pre-boot eXecution Env (PXE) v2.1
PXE-E61 Media Test Failure, check cable
PXE-M0F: Exiting PXEROM
I tried to install WXP professional from an orginial DVD but it would not install - saying that XP setup did not find any hard disk drives installed in the computer!
Steven
*EDIT*
Have solved the issue installing the Intel Matrix Storage Manager firstly ;)
Thanks to all!

Bootmgr missing after recovery discs

Hello,
So I have recently had to factory reset my laptop which wiped everything clean including losing a restore point. I purchased the 3 recovery discs from HP 2 x Win 7 recovery media DVD's (Part 1 and 2) and the application and driver recovery DVD.
When going through the restore process the 2 recovery discs were absolutely fine whether the app and driver DVD was ejected after 5 seconds saying the computer didn't need it and it would be recovered from the hardrive. When I press finish and it restarts itself the screen goes black and comes up with a message saying "BOOTMGR MISSING CTRL + ALT + DEL to restart".
The order of the boot menu is the internal CD/DVD ROM first then the hardrive which I worked out in the BIOS menu.
Not sure what to do next especially as it doesn't want to accept the app and driver dvd. And have tested the HDD and Memory both passed no problem. I have tried removing the HDD and rehousing it then retesting it but made no difference to result.
Help!

HI @Grantc42 ,
Welcome to the HP Forums!
It is a terrific place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you tried to do a recovery from the disks supplied by HP after the first two it informed you that the remaining two were not required and would be recovered from the hard drive. The boot order is set to optical drive first and hard drive second. When you tried to boot to the hard drive you received the error ""BOOTMGR MISSING CTRL + ALT + DEL to restart. You have tested the hard drive and memory and no issues were found
Try changing the boot order to hard drive first
Restore the defaults from the bios screen. This will allow it to scan for the attached hard ware.
If the issue remains, I would try a full recovery one more time and if the issue remains contact HP support for further assistance.
HP PCs - Performing an HP System Recovery (Windows 8)
HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Notebook shows BOOTMGR missing after running return system to factory condition

I have a HP Pavilion Entertainment notebook Model #dv7 3163cl. First I need to say I am a beginner user. My problem started with a low battery issue. Then using recovery mgr. I first ran back up disks and then attempted system restore. During which it shut off. When I tried to restart it it originally said something about starting like new from factory. Then said unable to load windows program. I contacted hp and tech had me purchase a 1 year phone support plan. Then had me go th the recovery manager and select restore to factory image. During which it gave this message. Recovery Manager could not restore computer using the fzctory image. Please contact HP support. Error code 0xe0ef0003. He said that meant I need a new hard drive. Now when I turn it on it says BOOTMGR Missing. Use ctrl apt Del to start but that does not work. It does nothing. Could the tech be right? Is there a way I can check my disk first? Or another way to tell? It wasn't the original problem so I'm not confident in his determination. Should I be?
This question was solved.
View Solution.

Immediately after powering on tap the Esc key. This should bring up a menu of which F2 is what you want to choose. Use Diagnostics to test your hard drive.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Bootmgr missing no access to recovery disc

I was doing a recovery on a compaq and after it completed formatting I selected re-boot and got the error message bootmgr missing. I'm at a complete loss at what to do . I don't have any recover or repair disc and have no way to create one because i dont have another device with widows 7. Any suggestions on what to do would be greatly appreciated!!!!

Please order Recovery kit for your model using which you can restore the system to original factory settings. Refer the following link for ordering procedure:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&lc=en&cc=us&dlc=en
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Satellite M300: bootmgr missing after Recovery has failed

I tried to reinstall Vista using Toshiba recovery disk... when i tried to do it took long time to copy files and then it asked for next disk.
Even after inserting 2 disk it still asks for insert next disk... I had no choice and i cancelled it...
When i booted again it said bootmgr missing
'CTRL+ALT+DELETE' to restart
I stuck up don't know what to do.
pls tell me sme suggestions

Hi
The error bootmgr missing appears because the Recovery procedure hasnt finished and the old bootmgr was destroyed.
It looks like your second DVD is not readable for no apparent reason.
Maybe you could try to recover the notebook using the HDD recovery option.
Maybe the partition was not damage during the recovery procedure from DVD.
So press F8 after notebook was powered up. Choose first option called Repair my Computer. Choose last option Toshiba Recovery and try to recover the notebook from HDD.
If it doesnt work then you could boot from the original Vista DVD and could try to repair the boot manager.
In worst case you would have to reinstall the OS from the Microsoft Vista DVD or you will order a new Recovery DVD from Toshiba.
Good luck

HP Pavilion dv9000 Factory Reset BOOTMGR Missing

This computer had a lot of files on it, and I needed something that would only have to run a word processor so I decided to do a factory reboot from the hp startup screen. It began just fine but when I checked back there had been an error. I tried to restart and try again but all I got was a screen say I g BOOTMGR Missing press ctrl+alt+del to restart. I have a Windows 8.1 disk that I have been trying to open so I can install it but nothing is working.

jibrankhan wrote:
Hi.. I have a hp pavilion g6. It's preloaded with Windows 7 basic. But d d person from whom I purchased have installed windows 7 professional.. And it not a genuine copy.. So I wanted to factory reset with preloaded windows 7 basic and want to update it.. D problem is its not show me the option system recovery of hp cyberlink.. Nor am getting the system recover by pressing f8 or f11.. PlZ help me out..
Follow Help 2 for more options....to order you REcovery disk to reboot to factory install.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Bootcamp not starting, BOOTMGR missing

Hello all, hope you're having happy holidays. Anyways, I foolishly attempted to increase the size of my bootcamp partition using Disk Utility and failed, only creating a second partition for my Macintosh HD. I deleted the second partition and attempted to re-allocate the space to the original Macintosh HD, but not only am I not able to do that but I can't boot back into Windows via Bootcamp. When holding the option key while starting I only get the options "Macintosh HD" and "Recovery". I do get the option to select Windows 7 as the startup disk under System Preferences, but while starting I get the error message "BOOTMGR Missing, Press any key to restart" and I my keyboard doesn't respond so I have to hold power to restart into OSX. I've seen other users with this issue so I was hoping maybe someone could provide me with some help on this. I have a Mid-2009 13-inch MacBook Pro, with a 2.53ghz Intel Core 2 Duo, running OSX 10.9.5. Thank you for any help in advance.

Nevermind. I created a Windows install "disc" using Bootcamp, a thumb drive, and my Windows iso. Then I selected Windows as the startup disk under preferences and loaded into the Windows installer on the thumb drive. I selected "repair this computer", rand "chkdsk" in the command prompt, and ran the automatic repair tool. After it restarted I held option and Windows showed up on the startup disk options. Thanks for nothin

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

Bootmgr missing

After i press power button, monitor still blank and there are some text "bootmgr missing" "press ctrl+alt+del to restart".
I am doing "press ctrl+alt+del" but this is not working. How to fix this problem? Help me please...

Thank for you Mr. ERIK.
I use Lenovo ThinkStation S20. Intel Xeon E5502 Processor (1.86GHz 800MHz 4MB).
4 GB DDR3 SDRAM. 250GB SATA HDD. NVIDIA Quadro NVS250 256MB. Genuine Windows Vista Business 32bit. DVD Recordable. Keyboard, Mouse Lenovo.
best regards
SALMAT - from Indonesia

BOOTMGR Missing during reimage

Been having trouble with my Satellite P755-S5120 for a while. It would turn off randomly while I was using it, and turn off or restart during boot up. So I backed up my files on an external hard drive and started the process to restore to factory condition. I got to the point where the Toshiba Recovery Wizard was up and running, initializing the process, when the laptop shut down. I waited a few minutes and nothing happened, then finally it restarted with the message "Bootmgr missing press ctrl+alt+del to restart"
Did a little research and found that if I had the Windows install disk (I do) I could repair my pc by booting from the cd. I see that to do this I need to go into the BIOS and change my settings to boot from CD. Problem is, when I turn on the computer it goes immediately to the bootmgr is missing, so I can't get to the BIOS to change the setting.
So, is there any way I can bypass this to get to the BIOS? Or any other steps I could take to get the system restore process going again?

Usually if tapping F2 doesn't work to get into the BIOS, try holding it as you start the laptop. You should also be able to get to the boot menu by tapping F12 or holding F12 as you start the laptop.
- Peter

BOOTMGR missing ( no data on laptop can be found)

Hi, I've purchased an HP Pivillion G6z notebook PC a month ago and my lil nefhew accidently knock down my laptop. it's shut down right away after that i try turing it back on again and again but the white letter keep showing up " BOOTMGR missing" I've tried to find many possibles ways to try and fix it but i chouldn't. I log into hp home site and try to fine the solutions and i have but the problem is that i do NOT think i have gotten a Recovery CD or anything. i've read many solution and all it's lead me to is the "recovery CD" so how do i get a recovery cd? how much does it cost? please help.

Hi,
I would suggest trying the following procedure first of all - this should tell you whether there is a physical ( ie Hardware ) problem with the notebook of if the operating system just needs to be reinstalled.
If you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your original OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself on another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD CD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Does this install Ok?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

After updating to adobe reader 11.0.3 my registry was corrupted with a gapi32.dll missing error. I

after updating to adobe reader 11.0.3 my registry was corrupted with a gapi32.dll missing error. It was not missing and was conflicting with outlook as this dll file is a common file. The only way I could fix the problem was to do a system restore back to when I had the 11.0.2 version and everything will work with that. You have a problem with version 11.0.3 installation. The same thing happened on 3 computers so I know it is this new version of adobe reader which is the problem.

It would be great, if you could provide us with the following details:
1. The OS you are working on.
2. The version of MS Office installed on your machine.
3. A screenshot of the error message along with the scenario in which the same is displayed.
4. How exactly did you go about updating Reader 11.0.02 to 11.0.03. Was it via the updater mechanism or by downloading the patch from the Adobe site.
Also, it would be great if you could let us know if there was any other Windows or Antivirus related updates applied on your machine in the same timeframe as the Reader update.

ABAP Code Endmethod missing error??

Hi Friends,Please help me. I am not having logsys/source system id field in source datasource , hence i trying to populate that in BI . I have wriiten the code in start routine which give me <b>ENDMETHOD MISSING error</b>, as below.
please tell what i am missing to eliminate the error <b>endmethod</b>
FORM STARTROUTINE.
USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TAB_TRANSTRU
G_T_ERRORLOG TYPE rssm_t_errorlog_int
    ABORT LIKE SY-SUBRC.
RESULT = G_S_MINFO-LOGSYS.
or
LOOP AT DATAPAK INTO l_s_datapak_line.
l_s_datapak_line-zzsourcsys = G_S_MINFO-LOGSYS.
MODIFY DATAPAK FROM l_s_datapak_line.
ENDLOOP.
ENDMETHOD.
ENDCLASS.
Poonam Roy

Use this....
FORM STARTROUTINE
   USING G_S_MINFO TYPE RSSM_S_MINFO
   CHANGING DATAPAK type TAB_TRANSTRU
                     G_T_ERRORLOG TYPE rssm_t_errorlog_int
                     ABORT LIKE SY-SUBRC.
RESULT = G_S_MINFO-LOGSYS.
LOOP AT DATAPAK INTO l_s_datapak_line.
l_s_datapak_line-zzsourcsys = G_S_MINFO-LOGSYS.
MODIFY DATAPAK FROM l_s_datapak_line.
ENDLOOP.
ENDFORM.
Reward if helpful...

Bootmgr missing error

Similar Messages

Maybe you are looking for