Bootpd not giving IP address to a PS/3

My home network is generally served by a Linux box running dhcpd and acting as a firewall and NAT router to the greater internet. However, I have an A/V closet with some equipment in it, which I'd like to wirelessly bridge to this network. On the network side, there's some old netgear 802.11b wireless router that I've had in bridge mode for several years, and which seems to work reasonably well.
In the A/V closet, there are three items of interest: An Intel Mac Mini running Mac OS X 10.4.9, a TiVo Series 3 DVR, and a Sony PS/3 game console. These are connected together using wired Ethernet through a desktop GigE hub/switch. If I run a big wire across the house from this switch to my main network, everything works fine; all components get IP off the Linux dhcpd.
Now, I disconnect the wire, make the Mac connect to the network wirelessly. This works; I can surf the web and whatnot. I then turn on Internet Sharing on the Mac, and share the wired interface out to the general network. Here's where the problems start.
The TiVo can send a DHCP request, and the Mac bootpd will respond with an answer, and the TiVo can get to the internet, so routing through the Mac works. However, the PS/3 does not get an IP from the Mac. Looking at the system.log for messages from bootpd, I see the requests coming on from the PS/3, but bootpd doesn't answer. There is no error of any sort in the log, just the lines with requests, and no answer.
I've also looked at the traffic with tcpdump, and it seems to confirm the hypothesis: for some reason, DHCP requests by the PS/3 are ignored, while requests from the TiVo work fine. I don't think it's a problem with the PS/3 itself, because it works with dhcpd on Linux, and it also works with a large variety of wireless routers in the world (just search the web to get this confirmed).
What may be causing this, and what can I do to fix it?

tutek101
What is your primary program Photoshop Elements 12 or Premiere Elements 12? Each is a standalone program with its own Elements Organizer 12. But when they are both on the same computer, they share the Elements Organizer 12 catalog.
Because of the NAS nature of your question, if it can be answered in a user to user forum, the best place may be in the Adobe Photoshop Elements Forum.
Photoshop Elements
I have seen one attempt to answer that type of question.
Change of IP address of external NAS drive
Photoshop Elements Catalog / organizer is very slow to respond
The Adobe document on moving the Elements Organizer catalog does not get into NAS and the type of situation that you are in.
Use Backup, Restore to move catalog | Organizer | Elements 6 or later
Please let us know your program and the outcome.
Thank you.
ATR

Similar Messages

I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

I used to be able to copy or drag and drop links from the address window. Now with the update, only the address is copied or dragged not the link. (Says something about not giving site information). I want to be able to drag and drop or copy links.

Question
I used to be able to copy or drag and drop links from the address window. Now with the update, only the address is copied or dragged not the link. (Says something about not giving site information). I want to be able to drag and drop or copy links.

To be more precise, you can setup a JComponent or JPanel on top of your JavaFX nodes that has a TransferHandler that can convert the (AWT/Swing) images dragged to the app to JavaFX image and then insert it into the underlying node.
As for the file chooser itselft: ListView and the JavaFX composer can allow you to create one quite easily. TreeView can aslso be used to a lesser extend (still a big buggy). For both of these, there are small bugs in the Cell API that may (or may not) prevent from displaying a proper thumbnail in the cells.
You can also use a regular JFileChooser if you do not mind the dialog box having a different LnF from the rest of your application.

Detailed Navigation not displaying giving ip address instead of hostname

Hi
I created applications in web dynpro.So i imported in the Enterprise Portal.
In that I created Role----Under That Worksets (X ,Y ,Z, W) -For each workset I created more than 4 Pages to that---For each page i added Iview.
I added "IP Address" and "HostName" in the c:/windows/system32/drivers/etc/host
Then i login into the Portal with normal URL
http://<HostName>:50000/irj/portal
So its Displaying.....Up to this its fine...
If suppose i want to login with
http://<IP Address>:50000/irj/portal....Under Each Workset, one page is showing,,,means one Iview is Visible...means Detailed Navigation is not showing.
All Pages are not visible...
Please any one help me to do this....
So its not possible to say to anyone ,,,,u have to add this ip Addrss in the path.
Please Provide the Permanent solution ,,even by giving IP address also all pages and Iviews must see..
Regards
Sushma

Hi Sushma,
I am not sure if the same apply when you access the URL through the IP. The SAP BI works on the concept of Fully Qualified domain names for access and also there is a system of web dispatchers which are configured for the domain name to handle report requests.
Also with portal in place you will not be able to see the URL of the application running within portal
for example the URL we see are
ttp://<xyz>.com/irj/portal but then the individual URLs for the applications running within the portal cannot be seen...due to security reasons.
That could be the possible case.
Regarding Use of Portal at client place:
1. You can use the VPN connectivity. You will only need to give the access rights to the perticular id & that will be all.
2. Assign the portal port to the some global address. That will work.
But, I suggest, VPN is better.
Regards
Chander Kararia
Edited by: Chander Kararia on Feb 6, 2009 11:10 AM

Trying to send photos on my mac book pro but it is not giving my valid email address choices

when i go to send photos it puts in an email address that includes the letters ISP before it. but it is not an email address i have ever used on my apple products. and it gives me no ability to change it. i saw something that says to go to 'mail accounts' but i have looked through all the settings and can't find it.

"it shows macintosh HD OSX 10.9.5 but the hard drive that is supposed to be in the upper right corner is not showing up. So it is booting from that drive."
Ok go to "Finder" preferences and make sure the "Hard disk" box is checked.
That will make your boot disk show up in the upper right corner. You can tell it's a boot disk because all the files will look like this instead of just being blank files.

DHCP: Some clients not getting IP address

Recently setup a new DHCP server on Mac OS X Server 10.5.8 running on an Xserve. We migrated from a Linux server.
The Xserve was originally just a file server. So the only services currently running are: AFP, DHCP, NFS, and SMB. No additional software is running.
The DHCP server ran just fine for the first couple weeks. But then we found some computers just stopped getting IP addresses from the DHCP server. Some were new computers introduced to the network. Some were laptops that had left and come back. However, the DHCP server is definitely still giving out IP addresses and renewing them for most new and existing computers. There have been five computers that have not gotten IP addresses so far, and that had been the case both on the wireless and on a wired connection. Two were PC's, one running Windows 7 and one running Windows XP with Lenovo's ThinkVantage software. The other three were different models of MacBook Pros.
For those five computers, we managed to get them working in two ways. One, we can select to use DHCP with a manual address. When we do that, it manages to pick up all the other information from the DHCP server like DNS and gateway. The second thing we can do is configure the DHCP server to supply a static IP address by providing it with the MAC address of these machines. When we do that, the computers receive the IP address from the DHCP server.
So I guess you could say the problem I'm experiencing is for a few computers the DHCP server seems to only be able to provide static addresses, but not dynamic ones with a lease time.
I have logging set to the highest for the DHCP server. Below is the first thing I noticed that keeps showing up. Sometimes it shows a different MAC address than the one below. None of the afflicted computers have that MAC address, though. I have not seen any other errors in the logs for the DHCP server.
Jan 24 12:09:47 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:09:47 fileserver bootpd[73839]: service time 0.000304 seconds
Jan 24 12:09:50 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:09:50 fileserver bootpd[73839]: service time 0.000280 seconds
Jan 24 12:09:54 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:09:54 fileserver bootpd[73839]: service time 0.000264 seconds
Jan 24 12:10:03 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:03 fileserver bootpd[73839]: service time 0.000265 seconds
Jan 24 12:10:11 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:11 fileserver bootpd[73839]: service time 0.000283 seconds
Jan 24 12:10:19 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:19 fileserver bootpd[73839]: service time 0.000291 seconds
Jan 24 12:10:28 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:28 fileserver bootpd[73839]: service time 0.000324 seconds

Recently setup a new DHCP server on Mac OS X Server 10.5.8 running on an Xserve. We migrated from a Linux server.
The Xserve was originally just a file server. So the only services currently running are: AFP, DHCP, NFS, and SMB. No additional software is running.
The DHCP server ran just fine for the first couple weeks. But then we found some computers just stopped getting IP addresses from the DHCP server. Some were new computers introduced to the network. Some were laptops that had left and come back. However, the DHCP server is definitely still giving out IP addresses and renewing them for most new and existing computers. There have been five computers that have not gotten IP addresses so far, and that had been the case both on the wireless and on a wired connection. Two were PC's, one running Windows 7 and one running Windows XP with Lenovo's ThinkVantage software. The other three were different models of MacBook Pros.
For those five computers, we managed to get them working in two ways. One, we can select to use DHCP with a manual address. When we do that, it manages to pick up all the other information from the DHCP server like DNS and gateway. The second thing we can do is configure the DHCP server to supply a static IP address by providing it with the MAC address of these machines. When we do that, the computers receive the IP address from the DHCP server.
So I guess you could say the problem I'm experiencing is for a few computers the DHCP server seems to only be able to provide static addresses, but not dynamic ones with a lease time.
I have logging set to the highest for the DHCP server. Below is the first thing I noticed that keeps showing up. Sometimes it shows a different MAC address than the one below. None of the afflicted computers have that MAC address, though. I have not seen any other errors in the logs for the DHCP server.
Jan 24 12:09:47 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:09:47 fileserver bootpd[73839]: service time 0.000304 seconds
Jan 24 12:09:50 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:09:50 fileserver bootpd[73839]: service time 0.000280 seconds
Jan 24 12:09:54 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:09:54 fileserver bootpd[73839]: service time 0.000264 seconds
Jan 24 12:10:03 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:03 fileserver bootpd[73839]: service time 0.000265 seconds
Jan 24 12:10:11 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:11 fileserver bootpd[73839]: service time 0.000283 seconds
Jan 24 12:10:19 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:19 fileserver bootpd[73839]: service time 0.000291 seconds
Jan 24 12:10:28 fileserver bootpd[73839]: DHCP DISCOVER [en1]: 1,0:23:32:c1:31:c3
Jan 24 12:10:28 fileserver bootpd[73839]: service time 0.000324 seconds

I'm setting up Apple ids, and its not giving me the option to set up a rescue email. How can I add one?

I'm setting up Apple IDs, and its not giving me the option to set up a rescue email. I've set up Apple ID's in the past, and its always given me the option. How can I add a rescue email?

You can find the instructions here. I removed the screenshots but the text is copied below.
http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
Once you've finished editing your rescue email address, click the Save button directly below the email field.

SMS - Sending to numbers not in your address book and inserting smiley faces

Hi
I'm new to the world of Blackberry and sorry if this has been posted elsewhere - I've trawled through and can't find anything similiar.
When composing SMS messages, I can only send to those people who are in my address book as the address book automatically opens when you select compose SMS.
Obviously there are times when you need to text to numbers not in your address book so how do you do it?
So far the only solution I have got is to add numbers to my address book and then delete them. Surely there must be a way you can just enter the number manually when you need to?
Secondly is there a shortcut on the Blackberry Pearl to insert smiley faces in SMS messages without entering :-) manually?
Thanks for your help
Trish
I love my Blackberry

You right. I misread. Hitting the SYM key is only for messenger, not for SMS. I didn't anyway to insert emoticons into an SMS message
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Error on invoking a webservice by giving ip address instead of local host

Hi,
I created a web service through jdeveloper and tried accessing the webservice generated WSDl file by giving ip address of my machine , but it throws me an error stating IE cannot display the web page . The same web service is running fine when giving local host on the Web service URL .
Looking frwd fr sme help
Thanks in advance
Ragaven

Hi,
your WebLogic server is not setup to listen for the IP address. You can change this in the WLS console for the server configuration. Note that when you install WLS and don't define any hostname then it will listen to all addresses (which also is the default for the integrated WLS)
Frank

HT5312 It is not giving me an option to even reset and I have a rescue email verified and its not giving me a option to reset my security questions

It is not giving me a option to reset my security questions

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

HT5312 Forgot answers to security ?s and not giving me optin for rescue email what do I do

Forgot answers to security ?s and not giving me optin for rescue email what do I do?

Didn't the link to contact the iTunes Store staff in the 'Additional Information' section of that article work for you? If you don't already have a valid rescue email address, only Apple itself can assist with recovering lost answers.
(88524)

Why can I not have the address bar appear when I installed Firefox 3.6?

Your "pictures" appeared and I had to choose one in order to continue. It would not clear unless I chose one. From then on, I could have no address bar, just Google, Yahoo, and in very dark bqckground which was hard to see. I tried everything; and finally gave up and deleted my Firefox. I have been a user for several years, but this one messed everything up. I could not get my addresses from the Express, and if I am going to have to use Outlook for the address book, I might as well just use Explorer! Give me some help (I have tried filling in the questions) and I will reinstall Firefox, I did like it a lot.
== This happened ==
Every time Firefox opened
== I was forced to chose one of your pictures. It took the place of your tool bar and address bar. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; FunWebProducts-MyWay; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

My apple id is not working on icloud because it is not in email address format. how can i change my apple id to email format so icloud can work?

Hello - I just purchased an iPhone 4s and would like to use iCloud but my apple id is not in email address format so when i try to sign into iCloud it won't let me use my apple id. i tried to change my apple id through my account settings but could not find a way to do that. i found ways to change everything else in my settings but when i pushed on the edit button to change my apple id the page didn't change. Not sure how i can get to use iCloud? Please help.

You change the name of your ID at https://appleid.apple.com. See http://support.apple.com/kb/HE40.

Crystal Report Not giving output

GoodMorning Gurus!!!
I created a crystal report in XI R2 based on a Multiprovider. Though the Multiprovider is active and the DSO has the Data correctly activated, the crystal report is not giving the output.
Could someone please tell the reasons...also i have checked the server connections as well..they are right.
Please give me the options to chk some more criterias.
Thanks & Regards
Jiten

not answered

SapScript Data is not printing in Address window

Hi all,
 I am having a problem regarding printing some values in a window of sapscript.It prints data in that window for some input and not for others input. The structure , which is being passed to this window is having values in print program all the cases. I get into the sapscript in debugging mode and found that the structure is having values fr all the test run ..But its still not printing in some cases.The window is coming as blank.
the code in the editor of the window is :
POSITION WINDOW
BOX FRAME 10 TW
AS &ztfin-fld18'/'&&t_ztfin-fld18&</>
ADDRESS PARAGRAPH AD
ADDRESSNUMBER &DKADR-ADRNR&
TITLE &DKADR-ANRED&
NAME &DKADR-NAME1&, &DKADR-NAME2&, &DKADR-NAME3&, &DKADR-NAME4&
STREET &DKADR-STRAS&
POBOX &DKADR-PFACH& CODE &DKADR-PSTL2&
CITY &DKADR-ORT01&, &DKADR-ORT02&
POSTCODE &DKADR-PSTLZ&
COUNTRY &DKADR-LAND1&
REGION &DKADR-REGIO&
FROMCOUNTRY &W_CLERK_LAND&
ENDADDRESS
can sugest me something.
Reward poits guranteed.

Hi Vijay..please have look in this..
Case: text is printed in address window
DKADR-ADRNR xxxx
DKADR-NAME1 xxxx
DKADR-STRAS xxx
DKADR-PFACH xxxx
DKADR-ORT01 xxx
DKADR-LAND1 xxx
DKADR-REGIO xxx
rest are blank
Case: text is not printed in address window
DKADR-ADRNR xxxx
DKADR-NAME1 xxxx
DKADR-NAME2 xxxx
DKADR-STRAS xxxx
DKADR-ORT01 xx
DKADR-LAND1 xx
rest are blank
is the Addresss CALL IS failing because of DKADR-REGIO = space ?

Bootpd not giving IP address to a PS/3

Similar Messages

Maybe you are looking for