Bootpicker not resetting nic on reboot

I've installed bootpicker on a early 2009 20" iMac, as I have 10.6 and ubuntu 10 on it. When booting into linux by choosing it on the bootpicker screen, the nic in linux doesn't function - it sees it but no network connectivity from either dhcp or static ip setting.
Here's the strange part - if I use refit instead of bootpicker (and boot linux from refit), the nic runs fine with linux. I think what is happening is that bootpicker isn't properly flushing the nic card's memory access and when linux comes up, the card is still trying to use shared memory that doesn't exist anymore since osx isn't running anymore.
I know this sounds strange, but I've got witnesses!
Any ideas on this? linux is using the forcedeth module. Anybody seen this? thanks..

sounds like nvram or pram

Similar Messages

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Firefox works fine until after lunch. Then it will not open, unless I reboot. Am at work, & I shouldnt have to do that, NEED a fix.

Everyday its the same thing. By midafternoon, Firefox will not open unless I reboot. I am at work, and have too many things open all day to stop and reboot for a browser, when I also have IE. I prefer Firefox, it is set as my default, and have many passwords saved there that are not saved in IE. Surely there is a fix for this? I have removed it, downloaded it again, followed other suggestions from your site, but still have the same problem. If I leave a window open all day long, it will still work for me, and thats what I try to do. However, invariably, there will come that accidental second that I hit the red X at the top and totally regret it! Please help!

I had tried this before, but went ahead and tried this again.
I clicked on "reset Firefox". Firefox closed, but did not come back up. When I tried to open it again, I did receive a message that said Firefox is running but is not responding, that I couldn't open another window without stopping the processes on the other page.
I never got a window that showed me the information that was imported, or a place to click finish.
Since I don't believe this completed, I don't believe my problem will be solved.
Debra

ODBC connection to Oracle 7 will not reset

We are using Oracle JDBC drivers for all but one of our
datasources which is an old Oracle 7 database. The ODBC connection
to this database will not reset when the database is bounced or the
database server is rebooted. We have to restart the ODBC service to
reset the connection. Is there another way to do this automatically
or perhaps another driver out there we can use? We are running
ColdFusion MX 6.1 Enterprise.

Wow, I can't believe that you are still using Oracle 7. In
fact, unless you are on 7.3.4 you aren’t even Y2K compliant.
Of course, I'm not even sure if there is an upgrade path from 7.x
to 10g, but I would consider migrating off of 7 to anything else.
Otherwise, you are going to have more and more compatibility
problems. In fact, you can no longer even get ODBC drivers from
Oracle for versions older than 9i.
Good luck.
Phil

IPod classic will not reset

My iPod classic will not reset and reads as it is full which it is not. Can't do anything with it ?

yeah that's the one...... takes you back to factory settings
That's actually a restore, which done via iTunes. A reset is equivalent to rebooting your PC.
What is the full error message you are recieving and is it from your iPod or from iTunes?
B-rock

CDN v3.0.2 - Can not reset password

We have a CE-560 with CDN V3-0-2-rc10. For some reason it will not reset password. Tried the defaults:
admin:default
admin:diamond
root:default
etc..
When booting, typed in "linux single" at the "LILO Boot#", unit proceeds to load to "Bash#". So then we typed "bash# source /sonoma/sys/bin/resetpass". After hitting enter, unit continues to load. We get to a prompt where we typed admin:default
This is what we get:
System Now Booting ...
LILLOO bboooott:: lliinnuuxx ssiinnggllee
LLooaaddiinngg lliinnuuxx......................................
bash# source /sonoma/sys/bin/resetpass
After typing that it goes to :
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting sonomafs...
Cisco Content Delivery Network V3-0-2-rc10
Kernel 2.2.16-3 on an i686
login: root
Password:
Login incorrect
login:
Any ideas on what we can do, or what we are doing wrong?

Ordinarily, CDN administrators change the default administrator account password (admin) in the same manner as any other account password. Refer to Chapter 2, "Configuring Enterprise Content Delivery Network Devices," in the Cisco Enterprise CDN Software User Guide for details on changing passwords for accounts.
However, if you lose track of the password for the admin account and accidentally lock yourself out of the Content Distribution Manager administrative user interface, you must manually reset the password for the admin account before regaining access to the Content Distribution Manager and the Users feature.
Resetting the admin account password restores the factory-configured password to the account. After resetting this password and rebooting the Content Distribution Manager, administrators can again log on using the admin account and configure the password for the account, as well as for other user and administrative accounts.
For more details : http://www.cisco.com/univercd/cc/td/doc/product/webscale/content/cdnent/ecdn30/entcdnug/configdv.htm#xtocid1196829

My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.

My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.

Standard troubleshooting steps in the following order:
1. Reset: Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo, then release. Ignore the slide to power off.
If no change, continue:
2. Restore your phone from a backup, note: if the problem is related to corrupt data, while this will restore a fresh OS, it will also restore the problem.
If no change, continue:
3. Restore as a "new" phone in itunes & re-sync your content. All saved data will be lost.
If no change, make an appointment at an Apple store.

CSS Service not coming up after reboot

I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
2008-03-06 22:16:32.587
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:32.588
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:33.217
[client(13472)]CRS-1001:The OCR was formatted using version 2.
2008-03-06 22:17:54.615
[cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
$ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
-rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
This is the log file mentioned in above file:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:16:32.579: [ OCROSD][2546869600]utread:3: problem reading buffer
5db000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
ful : [22]
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.676: [ OCRRAW][2546869600]propriowv: Vote information on di
sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
[0/0] to [2/2]
2008-03-06 22:16:33.217: [ OCRRAW][2546869600]propriniconfig:No 92 configuratio
n
2008-03-06 22:16:33.217: [ OCRAPI][2546869600]a_init:6a: Backend init successfu
l
This is tail of my ocssd.log
[    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
And this is my css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
rc 9
I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
Please let me know what else to check or SR is the only option?
Thanks
Daljit Singh

Do you mean CRS rather than CSS?
I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

My iPad screen went dark. it will not reset and is not discoverable on iTunes.

my iPad screen went dark. it will not reset and is not discoverable on iTunes?

Make sure it's plugged into power for at least 5 minutes, then try holding down the top power button and home button for 15-30 seconds. You may get it to reboot.

HT1339 I have reset my IPOD 5th generation but it will not reset my apple ID, can anyone help?

I purchased a IPOD 5th generation for my daughter and she started the set up and it wouldn't let her download games and apps, so I reset it but it will not reset her apple ID? The reason I did this is because it would say she has reach her limit on apple id's? Not sure never owed a apple before please help..

Do you have the latest version of iTunes installed? The latest version is 10.5.1.
Have you tried a different USB port?
Rebooted the computer?
Reset or restarted the iPhone?

HT5567 my i phone 5 has frozen during the os ipgrade and will not reset and i tunes does not recognise the phone

my i phone 5 has frozen during the os ipgrade and will not reset and i tunes does not recognise the phone

What is showing on the iphone screen?
Try this:
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
Make sure itunes is updated to the lates version on the computer.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Whilst connected to internet itunes will only open once after rebooting and thereafter it will not open again until reboot. When reboot with internet off itunes will open repeatedly. Help

This problem has only appeared in the past few days before that I had nio problems with itunes. Firstly I discovered that I could only open Itunes once after reboot - thereafter it would not reopen until I reboot again. I have spent considerable hours yesterday talking to the Apple help by phone and tried all there suggestions including of course reinstalling itunes amongst other things. Eventually I thought the problem had been solved when I discovered that I could suddenly open Itunes repeatedly without rebooting. After a short time I then discovered that the reason it was working agai was that I had rebooted with the internet disconnected and itunes would open repeatedly as normal provide I left the internet disconnected. When I reconnect to internet the problem resurfaces. HELP

For those still wondering how to install ios 6.1 on 5th gen iPod, you need to download it off of apples official website and then shift click restore from backup and choose the downloaded ios 6.1
apples one year warrant covers any hardware problems like these right?

Bootpicker not resetting nic on reboot

Similar Messages

Maybe you are looking for