Boots to flashing question mark folder and disc utility cannot locate internal hard drive

Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!

It was the internal HD cable. I replaced it and now my MacBook Pro works

Similar Messages

Booting problem - first question mark folder and now grey screen

Hi all,
I'm having problems with my Macbook booting.
Yesterday it worked fine until I tried to open an old Excel file, then all became extremely slow, but anyway I was able to shut it down properly, or at least this was what I thought.
The next time I tried to turn it on, a flashing question mark forder appeared instead of the apple. Then I tried various solutions I've found in forums, like turning on while holding down shift button like in http://support.apple.com/kb/HT1455 (nothing happens), the option botton (the cursor appears, but bootcamp does not start), and command+V for verbose mode (nothing).
Anyway now if I turn it on nothing appears, neither the question mark folder, just the grey screen.
I know that everything suggests that my HD is dead, but I don't really see the reason why it should have done so...
Thank you for your help.
Giulia

Hello,
"*a flashing question mark forder appeared instead of the apple."*
A flashing question mark can mean several things. One, the hard disk disk is failing. Two, it means that when you boot your MacBook, it can't find a System Folder to boot from.
Try booting while holding down the Option key. That should prompt the Startup Manager window so you can select your startup disc.
If that doesn't work... grab your install disk and check the hard drive for errors.
Insert the installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
The fact that you can't boot in Safe Mode (shift key) is not a good sign...
*"but I don't really see the reason why it should have done so..."*
How long have you had your MacBook? Do you have AppleCare?
Carolyn

Mac mini (late 2012) when booting shows flashing question mark folder

Hello, so after installing software update to my mac mini *late 2012* it froze for few mins so then I rebooted it and now it wont boot it shows flashing question mark folder, I can't use the boot buttons because it asks me for a frimware password and I dont remember setting one up so how can I fix it .

If you need to reset the firmware PW see:
http://reviews.cnet.com/8301-13727_7-57542601-263/efi-firmware-protection-locks- down-newer-macs/

Flashing Question mark Folder and clicking - no start up.

Dear Mac Users,
I've already got some info on the above, but my 3.5year old G5 iMac wont get past the flashing question mark folder icon. It can't find the start-up drive. The think the hard drive is dead - if I start up from external HD it's OK and/or Tiger CD - but the mac's HD is nowhere to be seen on any disk utility.
Just bought Disk Warrior - that wont see the iMac HDrive either - so unless anyone has got a fix, it looks like the thing will be dumped or I get a new HD. Are these easy to buy and fit? It's a Rev A model, (the buzzy first edition). I haven't got all my files backed up, just the key ones, which are now on a new alum iMac. Or I could run it off an external drive (noisy, though).
I had been moving the G5 around a lot (switched off) before it went belly up - could this be a cause?
Maybe it'd been feeling left out, with the new 24in installed.
Hope someone can shed further light.
Rob
(PS - anyone want buy my Disk Warrior?)

Your drive is dead, you can look in [macsales.com] or [smalldog.com] for a new new one. The drive isn't too difficult to replace, you can do it yourself, and do get the largest one you can afford, just make sure it's a 3.5" SATA.
Keep your DiskWarrior, you never know when it'll come in handy.

Flashing Question Mark Folder - Cannot Eject Disc - Problem Startup

My Macbook will not start up. I get a flashing question mark folder and will not startup.
Also, I have a dvd inside that will not eject.
Any suggestions?

You will need to reinstall OS X. Try this:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
If your drive cannot be repaired then you will have to reformat the drive and install OS X from scratch.
To eject the DVD press CTRL-E while booted from the installer disc or hold the mouse button down while the computer is booting from the installer disc.

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT1310 I have a macbook pro about 4 years old. I can't get it to open past the flashing question mark folder. However, I just tried to hold down the option key and the question mark disappeared. Still, nothing...the light is on the screen but nothing e

I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears. Nothing beyond that point....help?

There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How do I fix the GRAY boot-up screen with FLASHING QUESTION-mark FOLDER?

When I turn on the MacBook Pro laptop, I opened up the Safari Browser and its when the problem started. It was stuck on an loading infinite loop. I decided to force quit the application and/or turn off the mac by the Menu options, It did not work. So I did a "Hard" Shut-down and restarted the Mac, the Boot up screen stood gray for like a minute until the Flashing ? Folder icon showed up!.
My sister's laptop's warranty is expired so I wonder how can I fix it without having to spend too much money on a simple troubleshooting tip.
How can I download/create a boot-up Disk/Flash Drive so I can reset it to factory settings?
I cannot access the laptop because It's kind-of software bricked if you ask me. Also, I do not know how to check the Mac OS version outside of the "About Mac" menu. I do have another Mac which is a desktop computer with a CD drive.
I would appreciate some expertise on this issue a.s.a.p. Thank you!

Ok, now I am stuck:
Why does my Mac boot its OS from the Flash Drive instead of the INTERNAL HARD DRIVE???a
If I start up my MacBook Pro, It will have the flashing question mark folder UNLESS i plug in the OS-Boot flash drive. When I at the desktop screen and work on a program, When I unplug the Flash drive, THE OS WILL CRASH AS IF I TOOK it's soul (OS x Lion) out of the body (MacBook Pro Laptop)
this is frustrating because when I did the INTERNET RECOVERY, When I install OS x Lion, the Flash Drive only show up as an option as opposed to the HDD.
I cannot format the hard-drive in DISK UTILITY because it's grayed out. This is just frustating. I never had problems with PC Windows OS recovery but this (Mac OS).

G4 17' won't boot, flashing question mark folder with complications

I'm editing a final cut pro project, due to air on friday at noon and during conversion in compressor to dvd format, final cut quits then the computer freezes up. On a hard restart I get the flashing question mark folder.... i know what that means
I was able to boot up after a couple of tries from the os 10.4 (tiger) cd and the hard drive shows up but disk utility can't make the repair. This is the error i get:
booted with the tiger os cd and got to the disk utility. the hard drive does show up with some generic-y looking name. I try to repair the disk and get this error (in red):
Invalid node structure
Volume check failed.
Error: The underlying task reported failure on exit
then it says:
1 volume could not be repaired because of an error
g4 powerbook 17" Mac OS X (10.4.9)
so then i get the bright idea that i will change the startup disk to network drive and try to start from another drive on the network. it tries to find it then goes back to the flashing question mark. I've restarted holding the c key down with the tiger cd back in there and it is spinning but it never reads it.
any ideas? I REALLY need to salvage this film if possible.
thanks!!!!!
donna
Has anyone seen this before? What is my next step--short of erasing the drive. i really need to get this project off.
thanks in advance for any and all help!!!!!
g4 powerbook 17" Mac OS X (10.4.9)

i'd try disk warrior except that i cant get it to boot from ANY cd right now EXCEPT apple hardware test. and i have NO idea what to do with that.
I've tried booting in option mode and all i get is the little restart button and the forward arrow button but NO drive options
it won't pick up my other laptop in target mode
i've even put in Norton Utilites 8.x and it won't boot up from that either.
i've zapped the pram--nothing
know of any other boot tricks or shortcuts?
donna

IMac won't boot - flashing question mark folder

Hi, I was having performance issues with my iMac, so after searching for a resolution, I followed some suggestions to reset the PRAM and SMC....after resetting the PRAM it will not boot up at all! The startup sound chimes, then a blank grey screen briefly before a flashing question mark folder appears. Nothing happens..... I have the install cd, but there is a CD in the drive and I can't get it out. Help!!
Thanks in advance....
Andrea

HI Andrea,
To get the disk to eject, start the iMac while holding down the mouse button.
A flashing question mark appears when you start your Mac
Try booting while holding down the Option key.
Carolyn

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something.

Flashing question mark folder on macbook pro startup. PLEASE HELP

I have a MacBook Pro which I think is a 2011 version. When I startup the computer it comes up with the flashing question mark folder. I can't start it up via disc as I do not have the disc that came with the mac :( .

Di you try restarting and booting whilst holding down the command and R keys? Or even the command, option and R keys (assuming that you've a 2011 model)?
Some 2011 models came with discs as they shipped with Snow Leopard. Those that shipped with Lion had no discs. If your machine originally shipped with Snow Leopard, you can call Apple, with the serial number of your MBP handy, and order a set of model-specific discs (cost is, I believe, around $25 with taxes and shipping).
Please 'call back' and let us know if you've tried booting either to your Recovery partition or to Internet Recovery.
Clinton

GSoD, flashing question mark folder

Okay, after reading here a bit the suggestions aren't fixing my particular issue. We have a black MacBook running 10.3.
On boot, the GSoD comes up, and then the flashing question mark folder.
Tried putting in the Install CD and pressing at various times S, C, Apple, Shift, and Option. The Option gives a cursor but nothing else.
Pulled the DIMMS, cleaned off a white dust, and then installed them one at a time. No luck.
Wife had reported slowness during the evenings but she attributed that to me being on my computer.
Thoughts?
Leam

Hi Leam,
Are you sure it's running OS X 10.3? Reason I ask, is because the MacBook was released with 10.4.6 (May 2006). So if it's running Panther then the unit was downgraded. Matter of fact, I don't even think you can put 10.3 on an Intel Mac. Not to mention, OS X 10.3 doesn't offer Rosetta support so you wouldn't be able to install Intel applications on the machine.
Regarding the flashing question mark/folder icon, that's indicative of a missing, bootable OS. Which can translate into some of the following scenarios:
1.) The OS is corrupted and needs to be repaired or reinstalled
2.) The OS cannot be located because the HD is failing or has failed
3.) The HD's connection to the logic board has been lost or damaged and thus a proper boot sequence cannot be performed.
I'm unsure where you read about the "S" key on startup, the "C" key makes sense to try and boot off the disc drive. I take it that didn't actually occur, though?
I've seen scenarios where a HD can lock up the system bus and cause boot issues, like you're experiencing. Basically it prevents the optical drive from being accessed, despite valid startup keyboard commands. If you can't boot normally or off the installation disc, the next scenario would be the following:
1.) Remove the HD from the unit, mount it into an external enclosure and attempt to boot from a CD and repair the external HD.
2.) Bring the unit into a service provider / retail store for further diagnostics.

Flashing question mark folder, 3 times this week on my imac : (

My intel based 3.06 GHz imac this week is showing a flashing question mark folder. A friend says is that the hard drive is toast but well twice it was solved quickly. First time on monday I did commandoption+pr to reset NVRAM and it worked. Second time yesterday i pressed option during startup and i selected my mac os x volume. But well today nothing works : (
This flashing question mark is constantly showing up. any ideas how to force my imac to select the hard drive mac os x as the startup disk?
this doesnt work:
1. pressing option to select startup disk as i did yesterday.
2. when trying to boot from mac os x install disc pressing c during startup the imac ejects the dvd.
3. trying to start up in safe boot mode (pressing shift), verbose mode or single user mode all fails, just the flashing annoying question mark folder again.
I was reading that i could use ubuntu live-cd to transfer my data from ubuntu to an external hard drive. I downloaded, burned and then it does shows the ubuntu cd to install ubuntu (the mac os x install disc is ejected but the ubuntu cd works), but i really dont want to install ubuntu X_X I just want my imac back without installing any linux stuff.
I can do target mode with my other macs but the imac hd doesn't show up in the other macs, any way to force the HD to show via target mode in the other macs?
Any ideas? I guess my disk is failing and thats why i have been receiving these question mark folders 3 times this week.
Message was edited by: AppleSensei

if someone has the same issue, i just want to notice i solved it using ubuntu -linux- and transferring the files to an external hard drive from ubuntu, reinstalling mac os x again. When i did target mode with another mac the hard drive didnt appear in finder, but with ubuntu all worked great, i saw my files and then problem solved, i saved my data ; )
I did found annoying using ubuntu to solve this issue with my mac, but well i learnt something new, linux can also be useful when you don't want your data to be deleted as customer support told me they were going to do if i sent my mac.
Message was edited by: AppleSensei

Flashing question mark folder- Mac Help instructions arent working

My computer froze yesterday and when I re-started it, it had the flashing question mark folder.
I tried all of these steps http://support.apple.com/kb/ts1440
and these steps http://support.apple.com/kb/TS2570
I can't get anything to pop up upon start up other than the folder (ie when I hold down the C key with the Instal DVD in it thinks for a minute, spits out the DVD and the folder comes back).
If anyone has any ideas I'd greatly appreciate it. I'm even fine with erasing my hard drive if need be, I just want to get the computer back up and running.

You can go no further unless you're able to boot from your installation DVD. If your machine came with Snow Leopard installed, that would be the gray disc that was in the box. If you upgraded to Snow Leopard, then it would be the retail disc you used to upgrade. No other disc will work.
With the machine powered on, insert the disc. Hold down the power button until it shuts off. Press the power button again to turn it back on, then immediately hold down the C key. Keep holding until you see the Apple logo on the display.
If this procedure doesn't work for you, and you've done everything you say you've done, then you have either a hardware fault or a damaged disc.

Boots to flashing question mark folder and disc utility cannot locate internal hard drive

Similar Messages

Maybe you are looking for