Boots with 3 mb ram but not 4!?

Upgrading ram.  Boots OK with 3 gb but not at all with 4gb.  Any ideas?

Yeah the 4gb is being recognised, my mac is running off the 5 gb in total. True, but i've seen videos where people have the exact same mac as me and have 8gb RAM. But yeah thanks for your help guys

Similar Messages

  • Macbook (White 2010) works with 5GB of RAM but not 8GB

    I bought 2 x 4gb modules the other day. I tried to install them both on my macbook which although supposedly supports 4 gb of ram but others have proven it will support up to 8gb. I installed them then booted up my Mac but it would not start it merely kept beeping.
    However when i used one of the modules with one of the previous modules i.e 5gb in total, my computer turned on and is working. Why don't both of the modules work together? How come I am unable to get 8gb of RAM but I am able to get 5gb? Both modules work when i use them with a 1gb module, but they don't work together. Any Advice?

    Yeah the 4gb is being recognised, my mac is running off the 5 gb in total. True, but i've seen videos where people have the exact same mac as me and have 8gb RAM. But yeah thanks for your help guys

  • KT4 Ultra MS-6590 - Win XP Home boots with 2GB DDR333 installed but not 3GB

    Spec...
    KT4 Ultra MS-6590
    AMD Athlon XP 3000+ (FSB set to 166MHz in BIOS)
    BIOS MS-6590v1.4
    Win XP Home 2002, SP3
    Problem...
    Previously, had 768MB RAM installed, and XP strangely identified CPU as a 2200+.
    Recently upgraded the RAM to 3GB DDR333 (3 sticks of 1GB 184-pin unbuff DIMM 128MX64 DDR PC2700), and changed BIOS settings for CPU and DRAM.
    In the DOS boot screen, Win XP progress indicator fills completely from left to right, then stops with a half-blinking cursor in the top left of the screen.
    Removed 1GB stick and Win XP successfully loaded, also now recognising the Athlon XP 3000+, and running a heck of a lot faster.
    Tried adding the /3GB switch to the boot.ini file, which didn't do anything, and after reading more forum advice, guessed this might be irrelevant. I don't think this is a 4GT and PAE issue, as I'm not trying to install above 4GB (if I've correctly understood).
    Also, forum advice (various sites) conflicts on whether Win XP 32-bit is limited to 2GB or 4GB, and I can't find any workarounds for my current setup.
    Any ideas?

    Another test I've done is to enable boot logging with Win XP. This appends command lines to the file 'ntbtlog' in the windows directory, which mainly shows drivers being loaded as Win XP is launched. The log is normally date and time-stamped for every boot-logging session.
    When all 3 sticks are installed, I cold boot, then press F8 and select 'enable boot logging' from the options menu. This is what appears on the screen as the system, attempts to load Win XP.
    Loaded driver \WINDOWS\system32\ntoskrnl.exe
    Loaded driver \WINDOWS\system32\hal.dll
    Loaded driver \WINDOWS\system32\KDCOM.DLL
    Loaded driver \WINDOWS\system32\BOOTVID.dll
    Loaded driver ACPI.sys
    Loaded driver \WINDOWS\System32\DRIVERS\WMILIB.SYS
    Loaded driver pci.sys
    Loaded driver isapnp.sys
    Loaded driver viaide.sys
    Loaded driver \WINDOWS\System32\DRIVERS\PCIIDEX.SYS
    Loaded driver MountMgr.sys
    Loaded driver ftdisk.sys
    Loaded driver PartMgr.sys
    Loaded driver VolSnap.sys
    Loaded driver atapi.sys
    Loaded driver disk.sys
    Loaded driver \WINDOWS\System32\DRIVERS\CLASSPNP.SYS
    Loaded driver fltmgr.sys
    Loaded driver sr.sys
    Loaded driver PxHelp20.sys
    Loaded driver KSecDD.sys
    Loaded driver Ntfs.sys
    Loaded driver NDIS.sys
    Loaded driver Mup.sys
    Loaded driver BTHidMgr.sys
    Then the process freezes and a solid white block appears in the top-left of the screen, with the top-right corner of the block blinking.
    At this point, I turn off the PC using the main power switch, then remove the 3rd memory stick. After booting up again, with only 2 sticks installed, opening the text file 'ntbtlog' reveals that this boot event wasn't logged.
    So, I reboot Win XP with only the 2 sticks installed, and select 'enable boot logging'. This time, the above list of loaded drivers is shown in the text file, plus a whole lot more. The potentially interesting observation is the next in the list after "Loaded driver BTHidMgr.sys" which is "Loaded driver \SystemRoot\System32\DRIVERS\amdk7.sys".
    'amdk7.sys' is a driver file which seems to come with one of the Win XP Service Packs, and which "is necessary to enable Windows XP support for AMD PowerNow! technology on computers that use a mobile Athlon 4 or mobile Duron processor." http://support.microsoft.com/kb/306458
    Various other posts refer to it in relation to AMD Athlon XP 3000+ Mobile, whereas mine is a 3000+ in a desktop. Also, if 'amdk7.sys' isn't available, then Win XP will load the generic driver 'processr.sys'. In fact, my 'ntbtlog' includes the entry "Did not load driver \SystemRoot\System32\DRIVERS\processr.sys" which would make sense.
    However, my curiosity is that with the 3 sticks installed, Win XP fails to continue loading when reaching 'amdk7.sys' in the driver list.
    Another test I did was to change the power management settings in the BIOS.
    "IPCA Function: This item is to activate the ACPI (Advanced Configuration and Power
    Management Interface) function. If your operating system is ACPI-aware, such
    as Windows 98SE/2000/ME, select Yes. Available options: Yes, No."
    This was normally set to Yes. When I set it to No and rebooted with 3 sticks installed, instead of a half-blinking white block (as described above), the screen went black and then the system rebooted itself...
    The plot thickens!...
    Maybe there's a clear explanation for this - however, I'm wary of doing something to the 'amdk7.sys' driver file (whether removing or disabling it somehow) in case it prevents Win XP from launching with just my 2 sticks installed. I'd guess there are precautions, but need further info on whether this is relevant, and what the implications might be.

  • Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

  • Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

    Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

    I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
    Disk Utility can verify  my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
    I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
    I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
    I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
    Good luck!

  • Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence?   A

    Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence?   A

    THank you Ogelthorpe. When my wife's computer I went on line to the site that you sent and tried everything But nothing worked. When my son came to visit and his MacBook Pro did exactly the same thing we became suspicious - too much of a coincidence. We took both computers somewhere else, out of our apartment, and they both booted. We ran disk utility on both, but the report in both cases was that there are no issues with the hard drive.  Back in our apartment neither will boot up. My MacBook Pro is a later model with a solid state drive and it seems to work fine here.. I tried an external drive and it works fine. We think that this has something to do with some kind of magnetic interference in our apartment to which the 2009  drives are susceptible.  It is indeed a mystery!
    alf

  • Boot into Rescue and Recovery but not Windows

    Everytime my pc is powered on or restarted, it boots into Rescue and Recovery, but not Windows.
    What can I do?

    Hi,
    first I would like to explain one thing, so that we are on the same page with the RnR partition.
    Vista and XP are using different RnR partitions and the location of these aprtitions is placed on the HDD is different way, so that it can be used in conjuction with your Operating system.
    So in the time, where you have used the XP and OS, the RnR partition was placed in the partition table on the end/back. DIrectly after you upgraded to the Vista and did not made any changes to the RnR partition, than it is still on the end/back, which is not the corect way. Becase the Vista should use the RnR partition, that should be placed on the begind/start/in the front of all the other partitions.
    So in case there was no change made to the RnR partition, like relocation, or reinstall using the Vista RnR version, then you will not be able to boot into it.
    So here is what I would advice you to do:
    - reinstall, or download and install the Vista version of RnR (the latest version) => this will rewrite the partition table and in case of need it will create the RnR partition.
    - use bmgr32.exe , which is located on your HDD by default to rewrite the partition table. Please start it from command line in follwing way:
    bmgr32.exe /phil
    ==> this will bring you all the command line options and you can use it based on this.
    NOTE:
    Plase note, that once you captured some backups using the XP version of RnR , or a different version of RnR, then it's not possible to restor the backups using a different version.
    Simple: you must use the exact same version of RnR for backup and also for the  restore process.
    Let me know, if you have any more informations to this situation.
    Cheers

  • IPod nano works with USB 1.1 but not USB 2.0

    Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

    I have a similar problem with the following configuration:
    - Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
    - PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
    What works well?
    - All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
    - iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
    - iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
    What doesn't works?
    My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
    - Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
    - iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
    - iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
    I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
    Help!!!!!!!!!!!!!!!!

  • On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Email account.  What is causing this and what do we need to do to resolve it?

    On 3G we cannot send  Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
    We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine.  We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
    Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this. 

    Contact whomever supports the email account and get the correct Outgoing email server settings from them.

  • My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?, My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?

    Please help,my Xbox headset works with my iPhone 4,but not my 4s,any ideas why?

    make sure you disconnect it from 1 before trying to connect it with the other or it will fail

  • Code is working fine with OIM9102 BP14 patch but not in OIM9102 BP20.

    Using OIM API calls, I am able to fetch usr_key and ugp_key succesfully when utilityFactory is initialized with system admin login.
    When utilityFactory is intialized with non system admin ID, usr_key and ugp_key is returning as "0".
    This code is working fine with OIM9102 BP14 patch but not in OIM9102 BP20. Do user need any access right to invoke API calls ? Any thing related to this is changed in this patch?
    Environment details:
    OIM 9102BP20
    Websphere 6.1

    No, no more rights are needed. If it is working fine into BP older than this one, raise a SR and ask support guys to file a bug. But you have to show them step-by-step working into the older one and not working on newer. It is quite difficult happen, but maybe this feature broken on new business patch 20.
    I hope this helps,
    THiago Leoncio.

  • Windows XP - ok with 4.6.21 but not with 4.7.25 (getting_started example)

    I'm new to this.
    I have installled BD 4.7.25 and 4.6.21 from the msi onto my Windows XP (SP3) m/c
    When I compile the simple examples 'getting_started_examples' they
    work with 4.6.21 but not with 4.7.25
    The error happens in 4.7.25 when the dbp->open() is called:
    /* Now open the database */
    ret = dbp->open(dbp, /* Pointer to the database */
              NULL, /* Txn pointer */
              file_name, /* File name */
              NULL, /* Logical db name */
              DB_BTREE, /* Database type (using btree) */
              open_flags, /* Open flags */
              0); /* File mode. Using defaults */
    The error message is:
    illegal flag specified to DB_ENV->set_encrypt
    Any suggestions why this is happening?
    I am using lcc-win32 as the C compiler.
    Regards
    David

    Hi,
    You need to make sure you are using the dll of db4.7 rather than db4.6. Rebuild db4.7 dll and the example program, and make sure the db4.7 dll is used rather than that of db4.6.

  • My iphone plus is bending, what does Apple offer regarding this issue?   I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is u

    My iphone plus is bending, what does Apple offer regarding this issue?
    I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is under Slovenian ownership. This means that the original warranty comes from Slovenia, bit complicated but still I would like to get an urgent answer how to proceed with this issue, thanks

    Maybe i should have only asked if anyone is aware on apple's policy
    regarding bending. I took the point that this seems not a proper forum to
    pose Q's to apple thanks to both
    On Wednesday, November 5, 2014, Apple Support Communities Updates <

  • I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?

    I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?

    Hi, mmayers.
    Sometimes a simple power cycle of the router can correct the issue that you are experiencing.  However, the issue could be a little more complex.  Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology.  Below, I have included two articles.  The first article will cover basic Wi-Fi troubleshooting.  The second article covers the recommended settings for current Wi-Fi access points.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    Cheers,
    Jason H.

  • Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398

Maybe you are looking for