Bootting the iPod after a software update without using the AC Adapter...

Hello to all...
I really have a problem here... I have an iPod Photo (or iPod with Colour Display, as it's been renamed) 20GB and I just updated its software from 1.2 to 1.2.1... Well... It needs to be connected to the AC Power Adapter in order to boot for the first time after the update... The problem is that I don't have the AC Adapter here, because I forgot it at home... I only have the USB 2.0 cable, the iPod Photo 20GB and my computer...
Does anybody know how can I make it boot for the first time without connecting it to the AC Power Adapter???
ThanX in advance....
Pentium 4   Windows XP Pro  

I'm actually having the same problem - Updated the iPod, no AC adapter handy, and now it won't boot. I won't be near the AC adapter for over a week; I always just charge it with the laptop, which for some reason isn't enough now. I tried a car adapter, again with no luck. Does restarting after an update take THAT much more juice? At the very least, Apple could warn you up front - nowhere in the readme does it list the adapter as necessary. My PSP wouldn't even start an update without being plugged in - annoying at the time, but prefferable to a dead iPod for my trip.

Similar Messages

  • When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

  • HT1296 i have just updated to the newest version of ipod softare, the ipod intalled new software but now all the music and videos on it will not play

    i have just updated to the newest version of ipod softare, the ipod intalled new software but now all the music and videos on it will not play, how do i fix this

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and videos and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Updating without using the updater?

    Hi I was wondering if it is possible to download updates without using the updater as it is for a pc that is not online. Im after 3.2.0 on xp.
    Many thanks

    You can download the Windows updates
    here and the Mac updates
    here.

  • In the iCloud preferences, there is a message asking for software update to use the "find my mac" option.  However, my mac is updated.  What should i do?

    In the iCloud preferences, there is a message asking for software update to use the "find my mac" option.  However, my mac is updated.  What should i do?

    https://crash-stats.mozilla.com/report/pending/40811976-6063-4df1-b2ba-b82972110929
    https://crash-stats.mozilla.com/report/pending/1f1e849a-240e-4017-bbfc-485832110929
    https://crash-stats.mozilla.com/report/pending/2b3b5fc3-f3ed-47df-aa8e-293452110929
    https://crash-stats.mozilla.com/report/index/bp-9156003e-2cd4-488f-a6fb-195ff2110930
    https://crash-stats.mozilla.com/report/pending/7bc611b9-6d9d-4a4e-a32d-443ba2110929
    https://crash-stats.mozilla.com/report/pending/477fda1b-b03b-469e-ad85-878282110929
    https://crash-stats.mozilla.com/report/pending/4983f2ce-592c-4963-bcf5-319bb2110929
    https://crash-stats.mozilla.com/report/index/bp-25958efc-bef3-4366-a857-1cfa92110930
    https://crash-stats.mozilla.com/report/pending/881f2ee5-0b3c-4470-8590-401572110929
    https://crash-stats.mozilla.com/report/pending/7f30c50f-833e-41d3-946e-e66d62110930
    https://crash-stats.mozilla.com/report/index/bp-51bb0656-a417-42ff-87fb-b72942110930

  • HT1758 Power failure in the middle of a software update and not the computer will not boot up.  The computer just has a white screen with a grey apple and just loads non stop.

    My iMac will not boot up after a software update.  the screen is all whute will show a grey apple in the middle and will look like it is working but nothing happens; this can go on forever.
    Does anyone have any suggestions?

    Do you have a backup in the form of a bootable clone or Time Machine? Restore that and then try the update again.
    Some things to try here (Safe Boot)
    http://support.apple.com/kb/TS2570
    Another option might be to download the standalone from Apple Downloads on another Mac and try installing it in Firewire Target Disk Mode to the Mac that was interrupted during the update.
    http://support.apple.com/kb/HT1661

  • Application update without use the Framework

    Hi, all!
    Is there a way to implemente a auto-update feature without
    using the Adobe AIR Update Framework?
    It's because I'm developing into Flash IDE, and seens there
    is only a Flex framework available.
    I also would like to create my own auto-update framework,
    with customized UI and so on.
    Thank you.
    CaioToOn!

    Oliver, so if I understand correctly, the Updater class
    simply let's you call update() to install a new version based on an
    already downloaded AIR file? So the responsibility to check for an
    update and download it is still left up to the developer when
    building the initial app?
    What does the Updater framework provide in addition to this,
    and is there a Flash CS3 compatible framework?
    Also, what is the purpose of the "version" parameter in the
    Updater.update() method, since it has to match the AIR file being
    specified anyway?
    How should the AIR instance know what version to expect in
    the AIR file? Is that also completely up to the developer to
    determine?
    Thanks.

  • I cant update my iPod to iOS 5 without losing all the songs I've bought from the iPod, how do I update without losing them?

    So, I've been trying to update my iPod to iOS 5 because every app I want is requires iOS 5. When I try and update it on the computer it wont let me, it will go for hours saying it's "backing up". I decided I'd try and just restart it, but when I click it, it says that if I continue iTunes will delete any songs that aren't on iTunes library, and the songs I bought from the iPod itself are not on the iPod yet. I don't know what to do. If I don't update the software I wont be able to update any apps, or get new ones, and if I to update I'll loose the songs I've bought. Please help.

    - Try here:
    iOS: Troubleshooting backup issues in iTunes
    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    Note that the iPod backup that iTunes makes does not onclude synced media like apps and music. See:
    iTunes: About iOS backups
    You can also redownoad iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Why can't I buy the Ipod 2.2 software update and Itouch/Phone applications?

    Why cant I buy the new touch update and applications with money from an itunes giftcard? I bought a 25$ giftcard from max hoping I would have the 2.2 update and a few applications minutes from the purchase.
    Now im being told by technical support that I need a credit card set up on the account to buy the update and applications. What a rip off. Now im left with an Itouch that doesn't do what I want and even when I get a credit card on my account to get the apps I will have 25$ dollars which I have to spend on there Itunes overpriced crap songs.
    I will be trying to get a refund on this but I just want to know how does this inconvinence for the consumer at all benefit Apple? Is it because a gift card is a predetermined purchase thus making it less likely for consumers to spend more?
    To top it all Itunes does not even have a customer support phone line. What a disappointment.

    More info: "iTunes Gift Cards Terms and Conditions" (Canada)
    "This card is redeemable only on the iTunes Store for the Canada. To redeem this card you must have an iTunes Store account, subject to prior acceptance of license and usage terms. To open an account you must be above the age of 13 and in Canada. The iTunes Store requires iTunes 6.0 or later (7.0 or later for video), compatible software and hardware, and Internet access (fees may apply). Not redeemable for cash (except if required by law). iTunes Gift Cards may not be used on the Canadian store to purchase applications and games."

  • After a software update why doesnt the under armour website and a few other still not work correctly?

    the pictures don't want to be "active" when you highlight or click  the colors, the color should change and they don't.  Also if i click on  the item and go into its own section the pictures don't come up.  I also  cannot select a size of the item or add to cart(says error adding).  This is one of the few that does it.  Some other websites will not play videos, it acts like there is no media to be played when this happens as the area is boxed off but the box stays completely blank.  i have  upgraded to mavericks today, i have reinstalled java, i have reinstalled  browsers(it is the same across all browsers) any ideas of the culprit?   it does work on mac(as i have another startup disk it works fine on.  the problem is none of my information is on that hard drive(pictures,  itunes data, etc)

    Hey, guys, I have solved my own problem.
    I unplugged the Apple TV (there is no off switch) and let it rest overnight.  When I plugged it in again, it re-booted (I suppose) and, anyway, Airplay works now.
    Ralph aka beppi6

  • The iPod could not be updated b/c the firmware was corrupt

    i keep getting that message when i try to update my iPod. Is there a way i can fix this?
    iPod Nano gen. 2    

    I got this off of ipodlinux.org
    My iPod is really messed up how can I fix it
    Your firmware is probably corrupted. Don't worry, you can use Apple's restore utility to restore your iPod to "factory" condition. Be sure to backup your data, THIS WILL ERASE EVERYTHING ON YOUR IPOD!
    * First, connect your iPod to the computer and boot the iPod into Disk Mode. See the Key Combinations page to find out how.
    * On your PC, run the Apple iPod restore tool and click 'restore'. See your iPod's user guide for more information.
    * If that doesn't work, run the HP Format Tool (http://www.ipodwizard.net/attachment.php?attachmentid=8274&d=1146429146), then re-format the iPod with a FAT32 or NTFS file system. Also, follow Apple's instructions (http://docs.info.apple.com/article.html?artnum=93716) under the heading "Empty your Temp directory and restart". After that, start over with Apple's restore tool.

  • How can we communicate the TPC 2012maodule with cRIO module without using the Local software system

    Hi everybody
    Iam using TPC-2012 module with cRIO 9074 device.I made exe file and deployed into the harddisk of TPC. We are getting input/output values  on TPC only when the Software loaded system is on,if we switch off the system,we wont get the input/output on the TPC.all are connected through LAN connection.

    The best programming practice would be to create variables under the RT target (which means you are hosting the library on the RT target and not on the PC). You, then, just need to drag and drop the variables that you created into the TPC VIs block diagram.
    If you are interested in TCP/IP, look up the examples in the Example Finder (Help -> Find Examples) or search on NIs website.
    Also, be sure to go through the following article:
    How Do I Install Support for Shared Variables on the TPC-2012?
    and the following one:
    Using the LabVIEW Shared Variable
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • How to remove partial download music from ipod after my software update.

    How to remove partial download icloud music from ipod.

    If this has nothing to do with iTunes Match, then sync with iTunes and choose which albums, etc to sync or unsync.

  • After doing "software update" iMac wont start up !!!!?????

    So the Software Update window poped up and resquested i do a softwareupdate. So I said fine... it was for iTunes. It downloaded the files... and asked to start up and when it when to start up it hasn't been able to start up. It just make steh sound, and stays blank...after a minute the fan come on very loud. Ok, what's up?
    It's Sunday, so 800 line is closed. I tried the on-line tech support... but I got this computer in Nov 2005, so the basic tech support is done with. However, since this happened after one of their SUGGESTED Software Updates, i feel they should help me.
    And no I haven't done any back up in over two weeks. So, I don't want to do a fresh install.
    Any ideas on how I can get this thing started? or at least retrieve my old files and so I can take it to an Apple Store?

    I have found that the best way to avoid problems with updating your OS is to skip the delta (incremental) updates from software update and use the combo update that are offered in the "downloads" section of this website.
    I follow the following procedure each and every time and have yet to have an OS update go bad.
    1) Backup your data, preferably by cloning the hard drive to an external FireWire drive using a program like SuperDuper. If things go horribly wrong, you can then boot up from the external drive and restore everything back to the internal.
    2) Test your clone to see if it boots your Mac. A clone is no good to you at all if it doesn't work.
    3) Download, but do not apply the combo update.
    4) Download a tool like OS X Cocktail and run all the scripts and then reboot.
    5) Unplug all USB and FireWire devices - except the keyboard and mouse - from your Mac.
    6) Apply the update and reboot.
    7) Run all Cocktail scripts again.
    That is the method I have used since getting my Mac - recommended to me by others - that has never failed me once. I have yet to see an OS installation or update - including a major one from Panther to Tiger - go bad and I do not expect it to be otherwise in the future.

  • Simple Question : iPod for Mac Software Updater

    I cant seem to find the "iPod for Mac Software Updater" can someone provide a link?
    From the FAQ : "You can convert an iPod formatted for Windows into an iPod for Mac by using the iPod for Mac Software Updater on the Apple website. Note that once it is reformatted, it will only work with Macs. You need Mac OS 9.2 or Mac OS X 10.1 or later to reformat an iPod for Windows into an iPod for Mac."
    Thank you!

    One link as requested at the bottom of the page you just select your operating system and press the download button: iPod Updater

Maybe you are looking for

  • Adding custom nodes in SAP reference IMG and accessing them using SM30

    I was able to successfully add an IMG node and few activities under the node (for our custom configuration table data entry) in SAP reference IMG. (using transaction SIMGH). However, when I execute transaction SM30, enter the name of the custom table

  • Trusted Function Privelged File Folder

    This Adobe publication http://helpx.adobe.com/acrobat/kb/user-javascript-changes-10-1.html says place the Trusted Function .js file in (for MS Windows 7 & Acrobat X Pro): Users\(username)\AppData\Roaming\Adobe\Acrobat\Privileged\10.0\JavaScripts. (di

  • Can't search email

    Hi, Currently we having Exchange Server 2013 and Outlook 2013 . when we use the options "Use Cached Exchange Mode " in account setting, we trying to search email under Shared mailbox with Current Folder Options Selected and it will not display recent

  • PSE 9 Actions

    Can someone please tell me how to install actions into PSE 9

  • Servers-maintain

    Experts:_   good morning, In Implementation partner Onece project completed, (after going live and support) what type of servers  maintained means( development server and testing server or any other) and IN the same way In client position What server