BOP Results update only selected by check box.

Hi Folks,
Please help me in finding the solution.
I have ran the Back Order Processing for a perticular material with post processing option selected using /sapapo/bop transaction.
in the second step I want to update a few selected orders using trx /sapapo/bop_result. there it will display all the results with check box.
my requirement is to update only selected(check box) orders.
Points for sure.

Hi Srinivas,
I don't think there is way to update selected order from BOP results. I tried scenario in our system but when you hit Update button it will process all the order.
I also refered SAP Help but it not clearly mention about that.
In the point 5 in SAP help it says "You can update or reject the results entirely afterwards"
http://help.sap.com/saphelp_scm50/helpdata/en/26/c2d63b18bc7e7fe10000000a114084/frameset.htm
I hope this helps.
Regards,
Harshil Desai

Similar Messages

Enable to select a check box in ALV while accessing it through portal

Hi All,
Currently I have given a link on portal to run a transaction code. The output of the program is ALV report, where user any select the check boxes.
Now when I try to select a check box, it is not getting selected. I click on the checkbox, the tick appear and then the screen refreshes itself and the tick goes off. This is happening only when accessing it through portal. If i run the program in R/3 directly, I am able to select the check box.
Please advice on this.
Thanks
Namit

Reported to SAP for the same.

How to disbale a group of checkboxes when i select one check box WEBDYNPRO

Hi Friends,
Can any body help me how to disbale a group of checkboxes when i select one check box WEBDYNPRO Abap
Also can any body tell me how to handle chain endchain type of scenario in WEBDYNPRO Abap
Thank you..
Sai

Hi
In the context tab , create 2 context attributes ca_attr1 and ca_attr2   of type WDY_BOOLEAN under a context node cn_node
now in ur Layout , bind the ENABLE property of CheckBoxGroup UI Element with this attribute ca_attr1
bind the ENABLE property of CheckBox UI Element with this attribute ca_attr2
create a action for ur Checkbox , for the OnToggle property of ur checkbox
in OnactionToggle , check if ca_attr2 is 'X' , set ca_attr2 to ' ' ( for disable)
this can be done by code wizard , press control +f7 and use read/set context attributes , use get_attribute and set_attribute methods
// if ca_attr2 is 'X'
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr2.
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   get single attribute
    lo_el_cn_node->get_attribute(
      EXPORTING
        name = `CA_ATTR2`
      IMPORTING
        value = lv_attr ).
// if lv_attr2 is 'X' , use set_attribute method for ca_attr1
IF lv_Attr EQ 'X' .
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr.
*   navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   set single attribute
    lo_el_cn_node->set_attribute(
      EXPORTING
        name = `CA_ATTR1`
        value = ' ').
ENDIF.
regards,
amit

Re- Single click in the check box ensure to select all check boxes

Hi All,
I have an issue to notify the urgency of the cart to the buyer while creating the cart.For that scenario we have a check box in the Basic data of shopping cart.I added the check box in the basic data. Now the quote check box is available for all the line items.
The requestor can select any check box in any line items,so whenever he selects the check box- automatically all the check box should get selected , if any of the check box get deselected then imediatelely all the check box in different line items also should get deselected.

Hi Batchu,
Thanks for your reply, See if you add any custom field it will come one by one in the basic data section. Adding one more check box doesnot work for this case.
Moreover the problem is change to any particular line item can be captured in DOC_CHANGE_BADI but i cannot bring the same change to all line items (ie) If 3 rd line item check box is marked then immediately rest of the line item also should get marked.
In the case of DOC_CHECK_BADI to identify the line on which the change happens is tough.
SO thats is the problem for me to bring the logic in the code.
Please if any one come across similar kind of issue please give your suggestion.
Thanks,
Sibi

"Always Use Selected Format" check box in line items report

Hi Experts,
I have an issue in ECC 6.0.
From the transaction code FBL1N (Vendor Line Items) I am trying to export the report to spreadsheet by selecting the option List> Export>Spreadsheet then I have selected "Always Use Selected Format" check box. But if I execute the same report again I am not getting this option "Always Use Selected Format". Please let me how can we retrieve that option. Is there any possibility to get that option again either functionally or technically. I would like to know all the possible ways to get this option again.
Please do the needful.

Hello,
In one my thread Mr. Frank has replied as follows. I believe he has solved this.
Hope this may be really helpful.
The problem with the spreadsheet download is at one point, users have selected their default file type.
That said, SAPGUI is working as it should. (gui710)
Question though is how do we reset the values so they get the ?Select Spreadsheet Format? popup again.
The following steps should be performed :
- Call transaction SE38, enter program SALV_BS_ADMIN_MAINTAIN, and press F8.
- Follow the parameters below :
- Select ?DELETE? on the Actions Group
- Select ?DETAILED SELECTION? on the General Data :
- On Client - your number
- User : <user name>
-Hit EXECUTE.
-Press ENTER on the POPUP
- If there is an entry in the report that will need to be deleted. Also, make sure that the entry you will delete (for the user) has a value of GUI_ALV_XML_VER on field ?Parameter? .
- Select the line and hit the DELETE icon .
- Press ?Y? to continue delete. Press ENTER on the popup.
- Then EXIT all the way out of the program.
NOTE : When you run program SALV_BS_ADMIN_MAINTAIN, make sure they are out of any program that they are using for download.
Re: "Always Use Selected Format" check box in line items report
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 15, 2009 2:31 PM

Dynamic selection of check boxes on selecting a check box

Hi Friends,
I have to select the check boxes which are herarchically lower to a top check box,dynamically.
Eg:
Checkbox1
   checkbox2
   checkbox3
so if i select check box 1, on the screen both checkbox2 and checkbox3 have to be selected.
I did like below.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF P_ALL = 'X'.
      P_VAT = 'X'.
      P_NAME = 'X'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
but values are checked but on screen its not checked.
how to handle this.
Regards,
Simha

hi
do like this
paramenter: check_1 type c as check box at user-command ,
check_2 type c as checkbox default X,
check_3 type c as checkbox default X.
At selection Sreen output
if check_1 = 'X'.
loop at screen .
if screen-name = 'check_2'.
screen-invisible = '0'.
endif.
endloop.
loop at screen .
if screen-name = 'check_3'.
screen-invisible = '0'.
endif.
endloop.
else
loop at screen .
if screen-name = 'check_2'.
screen-invisible = '1''.
endif.
endloop.
loop at screen .
if screen-name = 'check_3'.
screen-invisible = '1'.
endif.
endloop.
endif.
this solve ur problem
Cheers
Snehi

Uncheck one check box when we select other check boxes

Hi All,
This might be very simple question for experts. I just want to unselect one check box (this check box is to select 'ALL' and this will be selected by default) when we select any other check box (for individual categories) on same region. Can any one please suggest me how to implement this?
Thanks in advance.
Regards,
Hari

Hi Shijesh,
Thanks for you reply.
I'm using two items (check boxs), like P1_ALL and P1_TEST. I want to unselect P1_ALL when we select P1_TEST check box.Both the check boxes contains single value in List of values. For this I wrote script like
<script type="text/javascript">
function uncheckAll(pthis)
elm = document.getElementsByName('P1_ALL');
if(pthis.checked)
elm.checked = false;
</script>
And in HTML form element attribute of P1_TEST, I have 'onclick=uncheckAll(this)'. But for some reason when I select 'P1_TEST', P1_ALL check box not getting un-selected.
I would be grateful if you suggest what needs to correct in this one.
Regards,
Hari

How can I make a check box active ONLY if another check box is activated?

How can I make a check box active ONLY if another check box is activated?
I have an editable PDF for a client, which contains text fields and check box fields.
There are three main check boxes (let's call them A, B and C) that the user is required to choose from, and I have given all three the same name in the Name tab of the General tab menu but different export values in order that ONLY one of the boxes can be checked at any time. Ticking one will deactivate another if it is already checked, etc.
However, I then have a further two check boxes which I wish to become available ONLY if the second one of the above three boxes is checked. Other than that I do not wish the user to have access to them.
I'm guessing it requires some kind of Action Script or Javascript, which is not my forté! Any help would be much appreciated.
Regards
Tony

See Disabling (graying-out) Form Fields by Thom Parker. It covers both Acrobat and LiveCycle forms.

Using the Convert button in Adobe XI results in a pdf with check boxes containing ? marks

Using the Convert button in Adobe XI results in a pdf with check boxes containing ? marks@

Hi Charles,
Are you still facing this issue. Is this issue reproducible with every file you want to convert.
Regards,
Ajlan Huda.

Interactive form, selection of check boxes, only want option to click one

I have an interactive form set up in Indesign CS6 and have muliple check boxes, I have them set to only appear when clicked, however our client would like it so that when one is clicked it won't let you click the others, so bascially is there are 10 check boxes, only allow you to click 1.
Kind regards
Mark

I've never used ID's new form features, so I don't know if yo can set that property for a checkbox directly in ID, but you should be able to to do this in Acrobat. As I recall, all the check boxes need to have the same control name.
That said, the select-one-only behavior is usually associated with Radio Buttons, not checkboxes.

How do I selectively convert check boxes (Alt0168 Wingdings) but NOT Bookmarks into editable fields (from Word table)

Acrobat X (Windows) is converting all fields from the Word table - making even the imported bookmarks editable. We just want the check boxes interactive. This has to be done on a large volume of documents, so it needs to be automated. I suspect some coding will be involved or perhaps a 3rd party app that allows one to selectively convert fields.
Thanks!

Ok, I found out that I need to apply the patch 5746875 to have that. But there only instruction to apply this patch on unix env. I need on Windows. Can any body help me?

How to select One Check Box at a time

Dear All
I have 10 records in details blok and also I have 10 check boxes .
I want user can only check one check box at a time .
For example If first record I have checked and i am trying to check the last record then the first record UNCHECKED and the last record will checked .
Like how redio buttons work ..
How can i do that ..?
I have done like this :-
1st I have declare a global variable in PRE_FORM :GLOBAL.CNT := 'N';
Then
WHEN-CHECKBOX-CHANGED trigger
IF CHECKBOX_CHECKED(EMP.CHK') THEN
    IF :GLOBAL.CNT != N THEN
        :EMP.CHK := Null
   HERE what to write ???
        RAISE FORM_TRIGGER_FAILURE;
    ELSE
        :GLOBAL.CNT := Y;
    END IF;
ELSE
    :GLOBAL.CNT := N;
END IF;Edited by: LuKKa on Aug 29, 2012 1:12 PM
Edited by: LuKKa on Aug 29, 2012 1:13 PM

LuKKa,
An easier method would be to use a Calculated Field to summarize the value of your CHECKBOX Item. For example, add a non-table item (call it SUM_CHECKED) to your detail block and do not assign it to canvas - so it will not be displayed. Then set the following properties of the SIM_CHECKED item:
Database Item = No
Calculation Mode = Summary
Summary Function = Sum
Summarized Block = <YOUR DETAIL BLOCK>
Summarized Item = <YOUR CHECKBOX ITEM>
Next, you will need to change your Detail Block property Query All Records to YES (this is required for the Calulated Item).
Now, make sure your checkbox is data type NUMBER and has the following minimum properties set:
Data Type = Number
Maximum Length = 1
Initial Value = 0
Value when Checked = 1
Value when Unchecked = 0
Check Box Mapping of Other Values = Not Allowed or Unchecked
Now, in your Checkbox Item's When-Checkbox-Changed trigger add code similar to this:
IF ( CHECKBOX_CHECKED('YOUR_DETAIL_BLOCK.YOUR_CHECKBOX_ITEM') ) THEN
   IF ( :YOUR_DETAIL_BLOCK.SUM_CHECKED > 1 ) THEN
   --Reset the checkbox
   :YOUR_DETAIL_BLOCK.YOUR_CHECKBOX_ITEM := NULL;
   MESSAGE('You can only check one item.');
   Message(' ');
   RAISE Form_Trigger_Failure;
   END IF;
END IF;I have confirmed this method works and it is more efficient than looping through your records to see if other checkboxes are checked.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Selection using check box in std ALV grid!

Hi all,
I have written a custom report to show the O/p in ALV grid.
This is my code:
TABLES :zpo_loi.
TYPE-POOLS : slis.
TYPE-POOLS: icon.
TABLES : sscrfields.
DATA : ls_composer TYPE ssfcompop,
           ls_control TYPE ssfctrlop.
DATA : wa_return TYPE TABLE OF bapiret2 ,
        wa_address TYPE bapiaddr3.
DATA : wa_crmd_orderadm_h TYPE zpo_loi,
       it_po TYPE TABLE OF crmd_orderadm_h,
       wa_po TYPE bbp_pds_header.
DATA : it_tab TYPE TABLE OF zpo_loi.
DATA : it_data TYPE TABLE OF crmd_orderadm_h,
        wa_data TYPE bbp_pds_header,
        et_data TYPE bbps_sf_po_output.
DATA : w_formname TYPE tdsfname ,
       w_sfname TYPE rs38l_fnam.
DATA :it_po_no TYPE TABLE OF select_be_obj_id,
      wa_it_po_no LIKE LINE OF it_po_no.
DATA :r_itab TYPE ddshretval OCCURS 0.
DATA : it_output LIKE TABLE OF zloi,
       wa_output TYPE zloi.
DATA : w_answer TYPE c.
DATA : g_repid LIKE sy-repid,
      g_title TYPE lvc_title,
      g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
      g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
      g_layout TYPE slis_layout_alv,
      g_print_alv TYPE slis_print_alv,
      g_variant LIKE disvariant,
      c_char_a(1) VALUE 'A',
      c_char_x(1) VALUE 'X',
      itab_alv_sort TYPE slis_t_sortinfo_alv,
      itab_alv_fcat TYPE slis_t_fieldcat_alv.
*       Internal tables          Begin with IT_                       *
DATA : it_fcat TYPE slis_t_fieldcat_alv,                           "---ALV
       it_disp TYPE TABLE OF zloi.
*       Work Area for Internal tables      Begin with WA_             *
DATA : wa_fcat TYPE slis_fieldcat_alv ,              "---ALV
       wa_layout           TYPE lvc_s_layo,               "---ALV
       wa_it_disp LIKE LINE OF it_disp.
DATA : it_sf_po TYPE TABLE OF crmd_orderadm_h,
       wa_sf_po TYPE bbp_pds_header.
*SELECTION-SCREEN:
* BEGIN OF SCREEN 500 AS WINDOW TITLE title,
* END OF SCREEN 500.
*DATA : functxt TYPE smp_dyntxt.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS sel_po FOR zpo_loi-zobject_id.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : pr_loi RADIOBUTTON GROUP grp1 USER-COMMAND ucom,
             pr_fondo RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b2.
*       At selection-screen output                                    *
AT SELECTION-SCREEN OUTPUT.
IF pr_fondo = 'X'.
    REFRESH sel_po.
    LOOP AT SCREEN.
      IF screen-name = text-003 OR screen-name = text-004.
        screen-input = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF pr_loi = 'X'.
    LOOP AT SCREEN.
      IF screen-name = text-003 OR screen-name = text-004.
        screen-input = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
*       At selection-screen on radiobutton                            *
AT SELECTION-SCREEN ON RADIOBUTTON GROUP grp1.
IF pr_fondo = 'X'.
    REFRESH sel_po.
    LOOP AT SCREEN.
      IF screen-name = text-003 OR screen-name = text-004.
        screen-input = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF pr_loi = 'X'.
    LOOP AT SCREEN.
      IF screen-name = text-003 OR screen-name = text-004.
        screen-input = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-low.
PERFORM populate_table.
PERFORM f4_help.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-high.
PERFORM populate_table.
PERFORM f4_help.
*       At selection-screen                                           *
AT SELECTION-SCREEN.
*---CHECKING THE INPUT >>>
IF sy-ucomm = 'ONLI'.
    PERFORM f002-check_input.
    PERFORM f001-check.
ENDIF.
*&      Form POPULATE_TABLE
*       text
* --> p1        text
* <-- p2        text
FORM populate_table .
SELECT zobject_id
           description
FROM zpo_loi
INTO CORRESPONDING FIELDS OF TABLE it_tab.
SORT it_tab BY zobject_id ASCENDING.
ENDFORM.                    " POPULATE_TABLE
*&      Form F4_HELP
*       text
* --> p1        text
* <-- p2        text
FORM f4_help .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      ddic_structure = ' '
      retfield       = 'ZOBJECT_ID'
      dynpprog       = sy-repid
      dynpnr         = sy-dynnr
      dynprofield    = 'A'
      value_org      = 'S'
    TABLES
      value_tab      = it_tab
      return_tab     = r_itab.
ENDFORM.                                                    " F4_HELP
*&      Form F001-CHECK
*       text
* --> p1        text
* <-- p2        text
FORM f001-check .
IF pr_fondo = 'X'.
    PERFORM display_expiring_fondos.
ELSEIF pr_loi = 'X'.
    PERFORM fetch_po_det.
    PERFORM build_fcat.
    PERFORM alv_display.
ENDIF.
ENDFORM.                    " F001-CHECK
*&      Form F002-CHECK_INPUT
*       text
* --> p1        text
* <-- p2        text
FORM f002-check_input .
IF pr_loi = 'X'.
    REFRESH it_po.
    IF sel_po-low IS NOT INITIAL.
      SELECT object_id
      FROM crmd_orderadm_h
      INTO CORRESPONDING FIELDS OF TABLE it_po
      WHERE object_type = 'BUS2201'
      AND object_id = sel_po-low.
      IF sy-subrc NE 0.
        IF sel_po-high IS NOT INITIAL.
          SELECT object_id
          FROM crmd_orderadm_h
          INTO CORRESPONDING FIELDS OF TABLE it_po
          WHERE object_type = 'BUS2201'
          AND object_id = sel_po-high.
          IF sy-subrc NE 0.
            MESSAGE e009(zsrm).
          ENDIF.
        ENDIF.
        MESSAGE e007(zsrm).
      ENDIF.
    ELSE.
      MESSAGE e010(zsrm).
    ENDIF.
    IF sel_po-high IS NOT INITIAL.
      SELECT object_id
      FROM crmd_orderadm_h
      INTO CORRESPONDING FIELDS OF TABLE it_po
      WHERE object_type = 'BUS2201'
      AND object_id = sel_po-high.
      IF sy-subrc NE 0.
        MESSAGE e008(zsrm).
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    " F002-CHECK_INPUT
*&      Form FETCH_PO_DET
*       text
* --> p1        text
* <-- p2        text
FORM fetch_po_det .
REFRESH it_po.
it_po_no[] = sel_po[].
DATA : w_count TYPE i,
         w_lines TYPE c,
         wa_header TYPE bbp_pds_po_header_d.
REFRESH : it_po,it_output.
IF sel_po-high IS NOT INITIAL.
    SELECT object_id
           description
           posting_date
           created_by
    FROM crmd_orderadm_h
    INTO CORRESPONDING FIELDS OF TABLE it_po
    WHERE object_type = 'BUS2201'
    AND object_id BETWEEN sel_po-low AND sel_po-high.
ELSE.
    SELECT object_id
           description
           posting_date
           created_by
    FROM crmd_orderadm_h
    INTO CORRESPONDING FIELDS OF TABLE it_po
    WHERE object_type = 'BUS2201'
    AND object_id = sel_po-low.
ENDIF.
w_lines = sy-dbcnt.
w_count = 1.
DO.
    IF w_count LE w_lines.
      READ TABLE it_po INTO wa_po INDEX w_count.
      MOVE wa_po-object_id TO wa_output-zzpono.
      MOVE wa_po-description TO wa_output-zzpodesc.
      MOVE wa_po-posting_date TO wa_output-zzpodate.
      MOVE wa_po-created_by TO wa_output-zzpocreator.
      CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
        EXPORTING
          i_object_id = wa_output-zzpono
        IMPORTING
          e_header    = wa_header.
      CALL FUNCTION 'BAPI_USER_GET_DETAIL'
        EXPORTING
          username = wa_output-zzpocreator
        IMPORTING
          address = wa_address
        TABLES
          return   = wa_return.
      CLEAR wa_output-zzpocreator.
      CONCATENATE wa_address-firstname '   ' wa_address-lastname INTO wa_output-zzpocreator .
      MOVE wa_header-total_value TO wa_output-zzpoval.
      MOVE wa_header-currency TO wa_output-zzpocur.
      APPEND wa_output TO it_output.
      w_count = w_count + 1.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.                    " FETCH_PO_DET
*&      Form BUILD_FCAT
*       text
* --> p1        text
* <-- p2        text
FORM build_fcat .
g_repid = sy-repid.
g_title = 'Print LOI details'.
g_print_alv-no_print_listinfos = 'X'.
g_variant-report = sy-repid.
g_variant-variant = sy-title.
CLEAR g_layout.
g_layout-f2code = ' '.
wa_layout-zebra       = 'X'.
g_layout-flexible_key = 'X'.
g_layout-colwidth_optimize = 'X'.
g_layout-detail_initial_lines = 'X'.
g_layout-box_fieldname = 'ZZCHECK'.
REFRESH it_fcat.
*Po no
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPONO' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_m = 'Purchase Order'.
*wa_fcat-seltext_s = 'Purchase Order.
wa_fcat-icon = 'X'.
wa_fcat-col_pos = '2'.
wa_fcat-outputlen = 10.
APPEND wa_fcat TO it_fcat.
*Description
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPODESC' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Description'.
wa_fcat-seltext_m = 'Description'.
*wa_fcat-seltext_s = 'Description'.
wa_fcat-col_pos = '3'.
wa_fcat-outputlen = 10.
APPEND wa_fcat TO it_fcat.
*Posting date
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPODATE' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_l = 'Posting Date'.
wa_fcat-seltext_m = 'Posting Date'.
*wa_fcat-seltext_s = 'Posting Date'.
wa_fcat-col_pos = '4'.
wa_fcat-outputlen = 8.
APPEND wa_fcat TO it_fcat.
*value
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOVAL' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO value'.
wa_fcat-seltext_m = 'PO value'.
*wa_fcat-seltext_s = 'PO value'.
wa_fcat-col_pos = '5'.
wa_fcat-outputlen = 15.
wa_fcat-no_zero = 'X'.
APPEND wa_fcat TO it_fcat.
*Currency
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOCUR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO Currency'.
wa_fcat-seltext_m = 'PO Currency'.
*wa_fcat-seltext_s = 'PO Currency'.
wa_fcat-col_pos = '6'.
wa_fcat-outputlen = 5.
APPEND wa_fcat TO it_fcat.
*Creator
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOCREATOR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Buyer'.
wa_fcat-seltext_m = 'Buyer'.
*wa_fcat-seltext_s = 'Buyer'.
wa_fcat-col_pos = '7'.
wa_fcat-outputlen = 12.
APPEND wa_fcat TO it_fcat.
ENDFORM.                    " BUILD_FCAT
*&      Form ALV_DISPLAY
*       text
* --> p1        text
* <-- p2        text
FORM alv_display .
SORT it_output BY zzpono.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = g_repid
      i_callback_pf_status_set = g_set_pf_stat
      i_callback_user_command = g_user_command
      i_grid_title             = g_title
      is_layout                = g_layout
      it_fieldcat              = it_fcat[]
      is_variant               = g_variant
      is_print                 = g_print_alv
    TABLES
      t_outtab                 = it_output[]
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form user_command
*       text
*      -->R_UCOMM      text
*      -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.                             "#EC CALLED
DATA: gd_repid LIKE sy-repid, "Exists
ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
    CALL METHOD ref_grid->check_changed_data .
ENDIF.
rs_selfield-refresh = 'X'.
CASE r_ucomm.
    WHEN 'PRINTLOI'.
      PERFORM call_sf.
    WHEN 'BACK'.
      CALL SELECTION-SCREEN 1000.
    WHEN 'CANCEL'.
      CALL SELECTION-SCREEN 1000.
    WHEN 'EXIT'.
      CALL SELECTION-SCREEN 1000.
ENDCASE.
ENDFORM.                    "user_command
*&      Form set_pf_status
*       text
*      -->RT_EXTAB   text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZALV' EXCLUDING rt_extab.
SET TITLEBAR 'ZALV'.
ENDFORM.                    "set_pf_status
*&      Form CALL_SF
*       text
* --> p1        text
* <-- p2        text
FORM call_sf .
REFRESH it_sf_po.
LOOP AT it_output INTO wa_output WHERE zzcheck = 'X'.
    wa_sf_po-object_id = wa_output-zzpono.
    APPEND wa_sf_po TO it_sf_po.
ENDLOOP.
w_formname = 'ZSR_EBP_DOCU_LETTEROFINTENT1'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = w_formname
    IMPORTING
      fm_name            = w_sfname
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc <> 0.
ENDIF.
ls_composer-tdnewid = 'X'.
ls_control-no_dialog = 'X'.
LOOP AT it_sf_po INTO wa_sf_po.
    CALL FUNCTION w_sfname
      EXPORTING
        control_parameters = ls_control
        output_options     = ls_composer
        wa_object          = wa_sf_po
      EXCEPTIONS
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        OTHERS             = 5.
    IF sy-subrc <> 0.
    ENDIF.
ENDLOOP.
ENDFORM.                    " CALL_SF
*&      Form DISPLAY_EXPIRING_FONDOS
*       text
* --> p1        text
* <-- p2        text
FORM display_expiring_fondos .
SET PF-STATUS 'ZLOI'.
SET TITLEBAR 'ZLOI'.
TYPES : BEGIN OF ty_output1,
            guid TYPE bbp_guid,
            object_id TYPE crmt_object_id_db,
            description TYPE crmt_process_description,
            posting_date TYPE crmt_posting_date,
            zzfondo_dat TYPE zfondo_dat,
            created_by TYPE crmt_created_by,
           END OF ty_output1.
DATA : it_output1 TYPE TABLE OF ty_output1,
         wa_output1 TYPE ty_output1,
          w_lines,
          w_count,
          it_fondo TYPE TABLE OF zsr_fondo,
          it_temp_fondo TYPE TABLE OF zsr_fondo,
          wa_temp_fondo TYPE zsr_fondo,
          wa_fondo TYPE zsr_fondo,
          w_diff TYPE p,
          wa_header1 TYPE bbp_pds_po_header_d.
CONSTANTS : c_otype(8) VALUE 'BUS2201'.
REFRESH : it_output1,it_temp_fondo,it_fondo.
SELECT b~zzfondo_dat
         a~guid
         a~object_id
         a~description
         a~posting_date
         a~created_by
INTO CORRESPONDING FIELDS OF TABLE it_output1
FROM bbp_pdhsc AS b
LEFT OUTER JOIN crmd_orderadm_h AS a ON b~guid = a~guid
AND a~object_type = c_otype.
LOOP AT it_output1 INTO wa_output1.
    CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
      EXPORTING
        date1            = sy-datum
        date2            = wa_output1-zzfondo_dat
      IMPORTING
        datediff         = w_diff
      EXCEPTIONS
        invalid_datetime = 1
        OTHERS           = 2.
    IF sy-subrc <> 0.
    ENDIF.
    IF w_diff <= '7'.
      wa_temp_fondo-zzpono = wa_output1-object_id.
      APPEND wa_temp_fondo TO it_temp_fondo.
    ENDIF.
ENDLOOP.
*select the final entries for PO whose FONDO is expiring
DESCRIBE TABLE it_temp_fondo LINES w_lines.
w_count = 1.
DO.
    IF w_count LE w_lines.
      READ TABLE it_temp_fondo INTO wa_temp_fondo INDEX w_count.
      IF sy-subrc = 0.
        CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
          EXPORTING
            i_object_id = wa_temp_fondo-zzpono
          IMPORTING
            e_header    = wa_header1.
        wa_fondo-zzpono = wa_temp_fondo-zzpono.
        wa_fondo-zzpodesc = wa_header1-description.
        wa_fondo-zzpodate = wa_header1-posting_date.
        wa_fondo-zzexpdate = wa_header1-zzfondo_dat.
        wa_fondo-zzpoval = wa_header1-total_value.
        wa_fondo-zzpocur = wa_header1-currency.
        wa_fondo-zzpocreator = wa_header1-created_by.
        CLEAR : wa_address.
        REFRESH wa_return.
        CALL FUNCTION 'BAPI_USER_GET_DETAIL'
          EXPORTING
            username = wa_header1-created_by
          IMPORTING
            address = wa_address
          TABLES
            return   = wa_return.
        CLEAR wa_fondo-zzpocreator.
        CONCATENATE wa_address-firstname '   ' wa_address-lastname INTO wa_fondo-zzpocreator .
        w_count = w_count + 1.
        APPEND wa_fondo TO it_fondo.
      ENDIF.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_structure_name = 'ZSR_FONDO'
      i_grid_title     = 'EXPIRING FONDOS'
    TABLES
      t_outtab         = it_fondo[]
    EXCEPTIONS
      program_error    = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.                    " DISPLAY_EXPIRING_FONDOS
Now in my ALV grid o/p i can see the check box but if i select one row and then try to select another the first one gets deselected.
Can anybody tell me what is missing?

Hi,
Try like changing this
insted of
g_layout-f2code = ' '.
use this
g_layout-f2code = 'DISP'. " Sets fcode for when double
and
g_layout-f2code = '&ETA'. " it will display POPUP screen
Best Regards
Ranga
Edited by: Ranga Swamy on Nov 1, 2008 11:07 PM
Edited by: Ranga Swamy on Nov 1, 2008 11:17 PM

Select all check box at some time

Hi all,
I have a search display .jsp page, which have some checked box, allow the users to check the box and download data from database, righr now the use need to checked the checked the box one by one,
bu tthey want to add other button, which allow them to select all the checked box by click the box, not ideal how to handle.
any advise

Hi ,
thank you for the reply,
I finally have time to finish this part
the code is <script language="JavaScript" type="text/javascript">
function checkAll(field)
for (i = 0; i < field.length; i++)
field.checked = true ;
function uncheckAll(field)
for (i = 0; i < field.length; i++)
field[i].checked = false ;
<input type="button" name="b1" value="Check All" onClick="checkAll(document.form1.mybox)">
<input type="button" name="b12" value="Uncheck All" onClick="uncheckAll(document.form1.mybox)">
</form>
</script>

How to select the check box automatically

Hi All,
I'm using forms 6i.I have 3 check boxes.If i Select the 2nd and 3rd check box then the fist check box should be selected automatically.The 2nd and 3rd check boxes are mutliarray block attached to each other while the !st check box is not attached to them. while Can someone please tell me how to write the code for this?
With Regards,
Gowtham
Message was edited by:
Gowtham1232
Message was edited by:
Gowtham1232

It's not very clear, but I think that having a WHEN-CHECKBOX-CHANGED trigger on checkbox2 and checkbox3 that says
IF :checkbox2 = 'Y' and :checkbox3 = 'Y' THEN
:checkbox1 := 'Y';
ELSE
:checkbox1 := 'N';
END IF;assuming 'Y' is the checked value of each checkbox and 'N' the unchecked.

BOP Results update only selected by check box.

Similar Messages

Maybe you are looking for