BOP taking into account HELD/HOLD POs
Dear gurus,
May i kindly seek your inputs as we are always receivnig errors in CIF due to faulty POs that has been set to held status.
For what i know, BOP should NOT consider them, but in this case, it is still taking it into account.
Please advise.
Thanks and regards!
Zeke
Dear Zeke,
When the PO is kept on hold, as far as I know, system should trigger a queue to APO to delete it from LC as it is no more an element that accounts for further processing. If you're still facing a problem here, there seems to be an inconsistency. Are you regularly running the CIF delta report /SAPAPO/CCR and are you correcting the errors ? If you're following these things and if you're still facing the errors, there might have been a note that is missing in your release that addresses this problem. Getting in touch with SAP can help you.
Hope this helps
Babu Kilari
Similar Messages
-
What are the relevent steps to take in tracking a lost iphone 5 taking into account that the battery was dead at the time
You would have neede to have "Find my phone" activated on the iphone
Log into icloud https://www.icloud.com/ and track. -
Planned orders are not taking into account the processing time
Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano -
Finder not taking into account local backups when reporting free disk space
Time Machine in Lion (10.7.2) stores local backups of files on your laptop's hard drive when it is not connected to an external Time Machine backup drive. See this article for more information.
If you click on the Apple in the top-left corner of your screen and choose About This Mac > More Info > Storage, you will see exactly how much space your local "Backups" are taking (along with other useful info about how your hard drive space is being used).
Interestingly, the amount of free HD space listed there differes from the amount of free space Finder says is available (when you choose View > Show Status Bar to display it). The amount that it differs is exactly the same as the amount of the local "Backups." So, it appears that Finder is not taking those local Backus into account when it displays free disk space.
So, Finder is telling me I have almost 100 gigs MORE free space than I actually have. I would prefer Finder to show me how much space I have AFTER the local Backups are taken into account.The article that you linked to gives the rationale for this:
Note: You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed. -
Hi,
Whatever I design in muse is totally different from what the preview in the browser shows. Texts crashed with images, and spaces and margins are not taken into account,
Is there a way to fix this? Is it a bug?
Thanks.Hi Federico,
Please take a look at this forum post for a similar discussion : Aligning multiple HTML objects on one page?
Regards,
Aish -
Instance Time taking into account Daylight Standard Time
When scheduling a report, the instance time does not seem to take into account Daylight Standard Time. This is probably because the United States is different than the rest of the world. Any chance this will be fixed in upcoming releases? Either that or I can just wait a few more weeks for the world to catch up.
Instance Time: 3/27/2009 08:30:21
Actual Time: 3/27/2009 09:30:21Hi Mike,
You are correct, the times you mention do not take the early daylight savings time change into account.
You should see the times become correct again when we hit the original time change date which I think would have been Sunday April 5 this year.
Cheers,
Steve -
Updating textfield with DEL key not taking into account
I have a decimal field which accepts only numerals...
after modifying the value in the field and pressing an OK button...the new value is reflected in a table...
but if i modify the same field value using the "delete" key and press OK...the new value is not taken into account....
but the same works with "backspace" key...
So do i need to set anything to respond to del key...
ThanksAlso i am not able to put the code here as it is a huge applicationI did not ask for your entire application. I asked for
demo code means code that we can compile and execute, but it only contains the code relevant to your problem
Here is an example:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DemoCode extends JFrame
JTextField textField;
public DemoCode()
textField = new JTextField();
getContentPane().add(textField, BorderLayout.NORTH);
JButton button = new JButton("Update Database");
button.addActionListener( new ActionListener()
public void actionPerformed(ActionEvent e)
System.out.println(textField.getText());
textField.setText("");
textField.requestFocusInWindow();
getContentPane().add(button, BorderLayout.SOUTH);
public static void main(String[] args)
JFrame frame = new DemoCode();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setLocationRelativeTo( null );
frame.setVisible(true);
}If you can't create a simple demo then you don't understand your problem and if you don't understand your problem then how are we supposed to?
custom field So you probably have a coding problem and we have no idea what your code looks like
that accepts only decimal values and why are you not using JFormattedTextField?
And this problem is not seen if i modify the custom field using any other key say like "Backspace".Again this problem doesn't make sense since the character should be removed from the text field before the OK button is pressed. -
ASA Version 7.0(8)
hostname BUJ-IT-ASA-LAN-2
domain-name leo.bi
enable password MgKXXPviZgW4zhKc encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
interface Ethernet0/0
description connects ucom lan
nameif inside
security-level 100
ip address 192.168.0.13 255.255.248.0
interface Ethernet0/1
description out interface
nameif outside
security-level 0
ip address 192.168.254.1 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
pager lines 24
logging asdm informational
mtu management 1500
mtu inside 1500
mtu outside 1500
no failover
asdm image disk0:/asdm-508.bin
no asdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
username UcomIT password Tx95VR7l4gIiavnh encrypted
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.248.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.0.0 255.255.248.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd lease 3600
dhcpd ping_timeout 50
dhcpd enable management
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
service-policy global_policy global
Cryptochecksum:ba068a6f85d256ce9351d903c60873e5
: endHi,
Its success really depends on the rest of the network that I dont know about.
If you hosts that you are using to PING/ICMP through the ASA are connected to the same network as the ASAs interface then you will have to make sure that the hosts both have routes towards the other network.
Also if on the "outside" of the ASA there are additional networking devices then you have to configure default route on the ASA also as mentioned in the other discussion.
route outside 0.0.0.0 0.0.0.0
The above replys ACL was just an example of the configuration format. If you wanted to allow ICMP then you would also have to allow ICMP
access-list OUTSIDE-IN permit icmp 192.168.254.0 255.255.255.0 192.168.0.0 255.255.248.0 echo
I dont see anything else wrong with the ASA configuration related to ICMP other than possibly the lacking of default route and allowing the ICMP from the "outside" with the ACL "OUTSIDE-IN".
Go through the network setup from one host to the other. On each step confirm that that device has route towards both of the networks. Otherwise the devices will naturally not be able to forward the ICMP messages from end to end.
- Jouni -
Corruption of User privileges on folder hierarchy (not taken into account ANYMORE)
Hello.
We use Portal 3.0.6.3.3 (still EA release) on NT with Oracle 8iR2.
We have set a Content Area and a very classical folder hierarchy to be managed by a single user (called administrator having all privileges on all folders) and other users having just the "Manage Items" and "View Content" for all folders, starting with the root folder.
It has worked perfectly for a while but after further work on privileges that, unfortunately, we cannot trace back, we have our folders not taking into account the privileges set (under the Access Tab) anymore.
Actually all users have now all privileges on the whole folder hierarchy. It means, an "Edit Folder" not only provides the "Add Item" link option but also all other options (Folder Properties, etc) are available.
We have checked again and again the privileges on the CA, root folder, folders etc, tried and removed and re-created the users or new users etc without success.
We imagine some privilege management-related table of the Content Area/Folder are "corrupted".
How could we return to a normal situation? On which tables of Portal schema should we investigate and try to find out what is going on?
Thanks for any help.
null... still me.
OK, forget my question. It appears that some "generic" group priviliges (AUTHENTICATED_USERS) had been changed by mistake thus overriding any other settings of the users and groups we were contemplating. So everything is under control now...
Thanks for having read anyway ;-) -
GPO Loopback Processing with Users taken into account
Hello,
I am attempting to configure loopback processing for a team and am wanting a bit of advice.
I want a script to be ran for the users on this team, which are in a separate OU than regular users. However, because of the settings required, I want it to only apply to certain computers as well, in a separate OU themselves.
Now I read that loopback processing is what I want to do, however the videos I've looked up don't explain how to do this really well.
All I want it to do is run a script taking into account the computers and users. Say if a regular user logged into those computers, the script wouldn't run for them. But if this team logged in, the script would run for them.
Can anyone explain how to do this appropriately with loopback processing?
Thank you.Hi,
>>Can anyone explain how to do this appropriately with loopback processing?
Based on your description, the following steps can be referred to as reference:
Enable Loopback
Merge mode in a GPO which is linked to the computer OU
In a GPO linked to the computer OU, configure logon script settings
In the GPO which is mentioned in step 2, use Security Filtering to deny the OU where
standard user resides Read and Apply access permissions to the GPO
Regarding Loopback Processing, the following articles can be referred to for more information.
Loopback processing with merge or replace
http://technet.microsoft.com/en-us/library/cc782810(v=WS.10).aspx
Windows Server: Understand “User Group Policy Loopback Processing Mode”
http://social.technet.microsoft.com/wiki/contents/articles/2548.windows-server-understand-user-group-policy-loopback-processing-mode.aspx
Regarding Security Filtering, the following article can be referred to for more information.
Security filtering using GPMC
http://technet.microsoft.com/en-us/library/cc781988(v=ws.10).aspx
Best regards,
Frank Shen -
Tax calc. during invoice post - taking unplanned del cost into account
Hi all
Iam posting an invoice in Miro for a p.o
i have material cost,unplanned cost
Iam using a input Tax of 5% which should only take Material cost into
account while posting.
but in my case it is taking the unplanned del cost also for calculation
can you pl. let me know where the changes are to be made so that only material
cost is to be taken for tax calculation.
for eg
material cost -- 100
tax -- 5.0%
unplanned del cost -- 10
so my inv. value should be -- 115.00
where as it is taking as -- 115.50.
regards
PrasannaHi srinivas
Thanks for your inputs
This is the present scenario.
We are distributing Unplanned del cost among the line items.
1. without having the Config made ( in OMR2)
We can still post the Invoices with Unplanned delivery cost
(without clicking the Calculate tax button )
by adding the
1. unplnd del cost in invoice details
2.clicking the Net proposal button on tax tab view
3. enter the total amt on basic data
4 when we are simulating we are getting
Warning message *********Twice ******
as Tax entered incorrect (code V4, amount 5.50), correct 6.05 eur
Message no. FF 707. and then we get the
5 We have to click the continue button twice
6 then we get the Invoice data view
7 when we click post , then again the
above warning message appears,
8 then we click continue button then it allows us to post.
correct me if the above process is wrong
My question :-
1. is this the standard functionality when using unplanned delivery cost (without tax calculation )
2. Can we apply some OSS so that this message appears only once.
Thanks
prasanna -
How to approach authorization taking data into account (?)
hi
I have been similar to "Introduction to ADF Security in JDeveloper 10.1.3.2" for an approach to authorization taking data into account.
For example to solve something like this:
Some users should be able to update SCOTT.EMP.SAL, but only for those records where they "are manager" (e.g. based on SCOTT.EMP.MGR).
Because the current (10.1.3) "OracleAS JAAS Provider" Re: ADF Security : custom SecurityContext seem to provide the API hooks or customization features I think I need for this, I tried the following approach:
(1) A solution implementation should preferably be "JAAS like", using classes from the "java.security" package like java.security.Permission or java.security.AccessControlContext etc. This way it is more likely to be future proof and could possibly more easily be integrated with future JAAS solutions from Oracle.
(2) To minimize dependencies in my application, I introduced only one custom interface that does what I really want to do, that is "to check permissions":
package accesscontrolstuff.common.security;
import java.security.AccessControlException;
import java.security.Permission;
public interface PermissionChecker
public void checkPermission(Permission pPermission)
throws AccessControlException;
}(3) It should be possible to easily check permissions in the business service implementation (ADF BC) and the view/controller layer (JSF managed beans).
I have created an example application that implements this approach (check README.txt) :
http://verveja.footsteps.be/~verveja/files/oracle/AccessControlStuffApp-v0.01.zip
It has an updateAllEmp.jspx page that has a button for each EMP row to give a raise (that is update SCOTT.EMP.SAL). It will show an error message when the user is not allowed to give a raise.
It has an updateSomeEmp.jspx page that has a button only for the EMP rows where the user is allowed to give a raise.
question :
All suggestions for improvement, on the approach or the example application, are welcome.
(using JDeveloper 10.1.3.3.0 : ADF Business Components and ADF Faces)
regards
Jan VerveckenThanks for you reply Frank and for going through the example.
(a1) about "... the example could be coded without JAAS in the application as well ..."
I'm not sure I understand when an application is "with JAAS" or "without JAAS" (in an Oracle context)?
(The AccessControlStuffApp-v0.01.zip example includes an orion-application file that has a jaas-mode configured, which I could probably use for an implementation variation the works with a javax.security.auth.Subject instance, but the current implementation works with the "no jaas-mode" variant using the getUserPrincipalName() method.)
(a2) about "This makes it hard to manage security roles ..."
I don't think I understand. For the example, all authorization configuration is in the EMP table, why would that be hard to manage?
What alternative would you suggest to "manage" security on the EMP table as is intended in the example?
(a3) about "I think the required enhancement would be to add the dynamic permissions to an existing ADFSecurityContext ..."
That sounds like what I have been looking for (see forum thread "ADF Security : custom SecurityContext").
(a4) about "... and make this available to the business service as well ..."
That would probably be useful.
see also http://www.oracle.com/technology/products/jdev/howtos/1013/adfsecurity/adfsecurity_10132.html
that says : "The defense-in-depth security design pattern demands that application developers implement application security with multiple lines of defense. ..."
Thank you for pointing developers to this thread.
regards
Jan -
How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1.
The problem is that after inputing the formatting gets lost.
Taking in account high popularity of Wordpress I suppose the problem is quite serious.Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Clipboard not working -> [http://kb.mozillazine.org/Clipboard_not_working]
* Rich Text Editing -> [http://kb.mozillazine.org/Rich_text_editing]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
Check and tell if its working.
Might not be related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
Taking Resources Allocation memory reservations into account with CIQ 1.5
Hello all,
I am trying to use CapacityIQ (1.5.2) to estimate how many more VMs can fit in our environment. Unfortunately Capacity IQ appears to be estimating a _much_ larger number of available VMs (CIQ says space for 49 more VMs; Resource Allocation tab suggests room for ~1 more VM).
With the goal of having our VMs run optimally (many of them run java), we tend to use full memory reservations on our VMs, as suggested by VMware (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1008480). This post (http://communities.vmware.com/message/1601230#1601230) suggests that CIQ does not take memory reservations into account when calculating capacity. This would be a glaring oversight by VMware; please tell me it's not correct and that there is a setting that can be changed so I _can use_ (aka continue purchasing) CapacityIQ.
thanks,
donfedeLet Mozilla know how you feel about the Plugin Check page here. <br />
http://hendrix.mozilla.org/ -
HS.EXP does not take into account the Value member and the source
Hello,
The formula is put in the "Entity Curr Adjs" part of the Sub Calculate.
The expression is the following and apply for one entity (Holding method) I filtered previously and the ICP Entity has proportionnal method with 50% rate:
HS.Exp "A#5420.I#[ICP None].C1#REC.C2#[None].C3#[None].C4#Recla_IAS_Aut_RetS_5=
A#5340.V#[Contribution].E#Logista_E_TBCO.I#UTE_O.C1#CLO.C2#TotC2.C3#TotC3.C4#TotC4"
The data I would like to retrieve is the one in Contribution Value as I put on the source part of the expression.
And yet, the data I get is the one of the Entity Currency and Proportion Value, which is different because the ICP has proportionnal method (50%) and the Contribution value is the result of Proportion - Elimination values.
To sum up: I obtain a data of 50 instead of 25.
I checked that the data I see in my form corresponds to the source parameters but it seems that it does not take into account the Value parameter.
Could it be that it is not possible to use a Contribution Value source for an Entity Currency Adjs destination?
Thanks in advance.
Regards,
JulienHi,
I see another problem in what you're trying to do. First, let me state what you're trying to establish: you are trying to get a value from one entity (say A) to another entity (say B), be it at [Proportion], [Elimination], [Contribution], ...
My question is: how can you know that during the consolidation process, by the time your code runs on B, A has already been processed and [Proportion], [Elimination] are not empty (or contain values from a previous consolidation run)?
The answer is "You don't". Theoretically, you have no control as per the order in which entities are calculated/consolidated during the process. Even more complex is the thing that if you have a multi-core machine, more than one entities may run in parallel, but still you cannot force A to run before B. I have done some tests and I've seen that in a one processor setting the order that entities enter in the process of consolidation matches the order you have placed them in the consolidation tree in metadata. Still this thing is not documented as far as I know and therefore you cannot rely on this.
Finally, I have also seen that in a simple case (B pulls from A), if you run consolidation twice, then you definitely get correct values. By the time you make a change in A, you have to run consolidation twice again to make sure that you get the correct data. I believe that you see that what I'm describing is good for experimenting but not for releasing to a client.
I tend to think of such a design, as a practice to avoid.
--Kostas
Maybe you are looking for
-
Forced to "upgrade" for more $$$ and now my FIOS speed is crippled.
On Wednesday of this week, I was happily using my FIOS 20/5 service with no problems when I realized my annual agreement for the TV/Internet package was about to expire so I proactively called Verizon to renew for another year of service. The agent t
-
Dear Friends, I need your help for the following scenario. I want to create a invoice like proforma invoice. eg I am having a sale order for 50 Tones.I want to take 50 % advance from the customer.Hence I want to create invoice only for these 50 %.How
-
I have downloaded a wedding video done on my iPad and put it in iMovie on my MAC. Have spent many hours refining it and now want to burn onto DVDs for other family. When I did this same thing 4 years ago, I had one-to-one help at apple store and sav
-
Subversion with Apache issues - where is it/can I get mod_dav_svn?
Hi, I have both the default Apache and MAMP installed. I have succesfully installed subversion and can use svnserve and the command line. I am trying to configure apache, but... There is no moddavsvn in /Apache2/modules and being a 'little knowledge
-
How do I import into Photoshop touch a PSD file from sketchbook pro mobile?
How do I import into Photoshop touch a PSD file from sketchbook pro mobile?