Border Fx text positioning

Firstly, both Aperture and Border FX are the latest versions.
I keep experimenting to find a way of positioning text on an image. The position of the text is not the same after saving. Any ideas as to what setting I should be using. This is most frustrating.
See screen captures below; note red text within Border FX in the `1st image, and then when it is saved (2nd image)

The screenshots really don't show: If I try to open the links to your screenshots, here is what I get:
Looking for something in Apple Support Communities?
The page you tried was not found. You may have used an outdated link or may have typed the address (URL) incorrectly.
Please try to post them again, so that we can understand your problem.
Regards
Léonie

Similar Messages

Border Fx text positioning (2nd post)

Hopefully, the screen shots can be seen.
Firstly, both Aperture and Border FX are the latest versions.
I keep experimenting to find a way of positioning text on an image. The position of the text is not the same after saving. Any ideas as to what setting I should be using. This is most frustrating.
See screen captures below; note red text within Border FX in the `1st image, and then when it is saved (2nd image)

What is the vertical aligment in the text box? Also in your iages the one in BofderFx does not have the border that the image saved back to Aperture has.
Here's an image I just did in BorderFx. Text is loczted in same place on the image in BorderFx and when it was saved back.
Message was edited by: Frank Caggiano

JButton text position without an icon

Hi,
I'm trying to set the text on my JButtons to be in the top left corner. I've read many of the topics on JButton text position, but they all assume you have an icon with your text. I want to be able to do it without icons (as my buttons don't need them). I tried using the setHorizontalTextPosition and setVerticalTextPosition methods, but the text is still in the same spot.
Does anyone have any ideas?
Message was edited by:
raardvark

Hi,
I'm trying to set the text on my JButtons to be in
the top left corner. I've read many of the topics on
JButton text position, but they all assume you have
an icon with your text. I want to be able to do it
without icons (as my buttons don't need them). I
tried using the setHorizontalTextPosition and
setVerticalTextPosition methods, but the text is
still in the same spot.
Does anyone have any ideas?
Message was edited by:
raardvarkPut a new border on the button that has some space on the bottom and right. Or add insets with the new border.

How to get text position in a pdf?

I need to get text position such has width, height, x, y and base position in a pdf.
Can one help me to work further.

i solved PDEForm issue thank you. Now i need to get the text from PDEElement.
Can you help for this?
PDEElement pdeElement;
    ASInt32 numElems = PDEContentGetNumElems (pdeContent);
    ASFixedRect bBox;
    for (ASInt32 i = 0; i < numElems; i++) {
        pdeElement = PDEContentGetElem (pdeContent, i);
        if (PDEObjectGetType((PDEObject)pdeElement) == kPDEForm)
            PDEForm form = (PDEForm)pdeElement;
            PDEContent content = PDEFormGetContent(form);
            GetCoOrdinate(content);
        else if(PDEObjectGetType((PDEObject)pdeElement) == kPDEText)
            PDETextState objPDETextState;
            PDEText aotextObject;
            memset(&objPDETextState, 0,sizeof(PDETextState));
            aotextObject = (PDEText)pdeElement;
            PDETextGetTextState(aotextObject,kPDETextRun,0,&objPDETextState,sizeof (PDETextState));
            if(objPDETextState.renderMode == kPDETextInvisible)
                AVAlertNote("Invisible");
            else
                PDEElementGetBBox (pdeElement, &bBox);
                os.str("");
                os << ASFixedRoundToInt32 (bBox.top) <<":" << ASFixedRoundToInt32 (bBox.bottom) << ":" << ASFixedRoundToInt32 (bBox.left) << ":" << ASFixedRoundToInt32 (bBox.right);
                AVAlertNote(os.str().c_str());
        else
            os.str("");
            os << "Type: "<< PDEObjectGetType((PDEObject)pdeElement);
           // AVAlertNote(os.str().c_str());
            // Get the bounding box of the PDEElement and fill out the
            // selection structure to highlight the image.
            PDEElementGetBBox (pdeElement, &bBox);
            os.str("");
            os << ASFixedRoundToInt32 (bBox.top) <<":" << ASFixedRoundToInt32 (bBox.bottom) << ":" << ASFixedRoundToInt32 (bBox.left) << ":" << ASFixedRoundToInt32 (bBox.right);
            //AVAlertNote(os.str().c_str());

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

Getting the absolute text position from a DOM tree

Does anybody knows how to get the absolute text position of a node inside the DOM tree? Is there any DOM implementation that keep track of the absolute text position of each Node element or I need to overload somo methods by hand?
Regards,
Daniel Oliveira

The position() function in XSLT returns the order of the element.
For an xml document with elements:
<a>
<b></b>
<b></b>
</a>
<xsl:apply-templates select="b"/>
<xsl:template match="b">
Element b:
<xsl:value-of select="position()"/>
</xsl:template>

SRM - Problem with a SRM Order with text position

Hello,
I produced an order requisition from SRM. (Document Type EC / Field Sel.Key NBB) Unfortunately I cannot change the category of commodities during this order requisition over the transaction ME52N. This must be however possible. The appropriate Field Sel.Key NBB is correctly adjusted.
The problem apparently lies in SRM. With normal SRM orders in the R/3 an order is put on. The category of commodities may not be changed then no more.
With SRM orders with text positions a order requisition is to be put on in the R/3. Functions also. The category of commodities is not also here alterable only unfortunately. That must function however.
My question: How can one change the data of the order requisition with text orders over SRM?
Regards
J.V.

hi J.v
you can make new request rather than changing the purchase request since material group in important data.
why you want to edit the PR and again trying to edit the data in sc created from pr.
I recommend you to create a new PR for your request.
since
eprofile offered sap ecc according to your material grp / purchase group combination inthe eban table (eprofile field).
but why you are trying to edit the same pr in the backend method(it is no.2 activity in sap - not supposed to do right)
if you dont want that request cancel the sc (complete it).
hope now you understood.
br
muthu

Text positioning not correct while typing in Flex Mobile Text Area

When I try to write text in Flex mobile TextArea, the text positioning is not correct. What might be the issue? Do I need to specify some Skin Class for it?

Could be that the font doesn't have Hindi chars support and the text you paste is HTML chars.
You could try to embed a font you know has the appropriate chars and use that for global and Applications CSS classes.

Compulsory quantity in text position of BOM

Hi gurus,
when I create a production order (CO01) and I add a text position in BOM (type T) the system requires an obligatory quantity. It's not logical that a text position requires a quantity. Is it possible to make the text position not obligatory?
Thank you.

Its very typical scenario, looks stupid to ask quantity even when we mention the Item catagory as T, but there must be something behind this which our mand cant find out, we are unable to get that kind of scenario.
by the way if you want to remove this files do as follows.
Go to tranaxcation code. SE80>enter Function group CMOD> double click screen no 150>click on layout> screen painter will come. then click on filed required quantity. the filed is "required" entry.
change that to optional.
It will solve your issue. for this you need the access key, since its a change in standar SAP.
Regards,
Pravin Mukkawar
TCS Gandhinagar
SAP-PP-APO consultnat.

Horizontal text positioning of DrawString method

I am trying to reproduce the below XPS XAML using the GDI+:
<FixedPage xmlns="http://schemas.microsoft.com/xps/2005/06" xmlns:x="http://schemas.microsoft.com/xps/2005/06/resourcedictionary-key"
xml:lang="und" Width="816" Height="1056">
<Path Fill="#FFFFFFFF" Data="M0,0L816,0 816,1056 0,1056Z" />
<Canvas Clip="M0,0L816,0 816,1056 0,1056Z">
<Path Fill="#FFFFFFFF" Data="M0,0L816,0 816,1056 0,1056Z" />
<Path Fill="#FF008000" Data="M0,0L816,0 816,1056 0,1056Z" />
<Canvas RenderTransform="1,0,0,1,10,10">
<Path Fill="#FFFFFF00" Data="M0,0L796,0 796,120 0,120Z" />
<Canvas Clip="M0,0L796,0 796,120 0,120Z">
<Glyphs OriginX="0" OriginY="87.5866666666667" FontRenderingEmSize="96" FontUri="/Resources/1057478c-ad6c-46da-af29-3e00c349c111.ODTTF" UnicodeString="Rutger
Koperdraad" Fill="#FF000000" xml:lang="en-us" />
</Canvas>
</Canvas>
</Canvas>
</FixedPage>
I manage to get the rectangles and the vertical text position correctly printed to the XPS document writer using the code below:
Private Sub OnPrintPageEx(sender
As Object, e
As PrintPageEventArgs)
If m_intPageNumber < m_objPaginator.PageCount
Then
Using objGraphics
As System.Drawing.Graphics = e.Graphics
' Correction factor between WPF and printer units
Dim f As
Single = 100 / 96
' Set the graphics quality
objGraphics.SmoothingMode = Drawing.Drawing2D.SmoothingMode.None
objGraphics.InterpolationMode = Drawing.Drawing2D.InterpolationMode.NearestNeighbor
' Draw the green background
Dim stcRect1 As
New Drawing.RectangleF(0, 0, 816 * f, 1056 * f)
Call objGraphics.FillRectangle(Drawing.Brushes.DarkGreen, stcRect1)
' Draw the yellow rectangle
Dim stcRect2 As
New Drawing.RectangleF(0, 0, 796 * f, 120 * f)
Call objGraphics.TranslateTransform(10 * f, 10 * f)
Call objGraphics.FillRectangle(Drawing.Brushes.Yellow, stcRect2)
' Draw the text
Dim objFont As
New Drawing.Font("Times New Roman", 72)
Dim intEmHeight As
Integer = objFont.FontFamily.GetEmHeight(objFont.Style)
Dim intCellAscent
As Integer = objFont.FontFamily.GetCellAscent(objFont.Style)
Dim sngOffset As
Single = 87.58667F - 96.0F / intEmHeight * intCellAscent
Dim stcRect3 As
New Drawing.RectangleF(0, sngOffset * f, 796 * f, 120 * f)
Call stcRect3.Inflate(100 / 96, 100 / 96)
Call objGraphics.DrawString("Rutger Koperdraad", objFont, Drawing.Brushes.Black, stcRect3)
End Using
m_intPageNumber += 1
e.HasMorePages = (m_intPageNumber < m_objPaginator.PageCount)
End If
End Sub
However, the horizontal text positioning is still different. The first letter starts too far to the right and the overall text is wider. How can I reproduce the XAML correctly in the GDI+?
To give some background: I have a WPF application that can print using WPF/XPS technology. Since this print path gives quality problems on many legacy printer driver (bad image resolution due to a bug in the XPS to GDI+ conversion), I am building an
alternative print engine based on the GDI+. So effectively, I need to convert my WPF graphics to the GDI+.
Rutger Koperdraad.

OK, I found the answer myself. By adding the string format as below, I get the correct result.
' Draw the text
Dim objFont As
New Drawing.Font("Times New Roman", 72)
Dim intEmHeight As
Integer = objFont.FontFamily.GetEmHeight(objFont.Style)
Dim intCellAscent
As Integer = objFont.FontFamily.GetCellAscent(objFont.Style)
Dim sngOffset As
Single = 87.58667F - 96.0F / intEmHeight * intCellAscent
Dim stcRect3 As
New Drawing.RectangleF(0, sngOffset * f, 796 * f, 120 * f)
Dim objFormat As
New Drawing.StringFormat(Drawing.StringFormat.GenericTypographic)
Call objGraphics.DrawString("Rutger Koperdraad", objFont, Drawing.Brushes.Black, stcRect3, objFormat)
Rutger Koperdraad.
Thank you for sharing your solutions and experience here. It will be very beneficial for other community members who have similar questions.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Skinning TextInput (and others) changes text position

Hi there,
I've been working on updating the visuals of our application and one path I took was skinning components. There's a designer in our team that works well with Photoshop and Flash (but not with Flex or programming at all), so I sent him the link of Narciso Jamarillo's article on creating skins for Flex using Adobe Creative Suit.
Although we had few troubles working over the default template for HaloSkin at first, we kinda figured out most of them. But now there's one problem I couldn't find a solution yet. Whenever I apply the skins he made, the components that show text like TextInput and ComboBox start showing text in the wrong position, a little above the center and closer to the borders (sometimes it gives the impression it cuts out characters when I align the text at right).
Here's a picture:
Skinned on the left, not skinned on the right.
So I'd like to know what exactly has influences over text position when I create a skin in flash, or any hint on what is causing this behavior.
Thanks in advance.
With regards,
David

I asked the designer to check in Flash and all grid lines are in proportional distance (4 pixels from edge). I also asked him to create a new skin from template, without any changes, and it displayed the same behavior, so I don't think it's a scale 9 slice configuration problem.
Could you elaborate what kind of "minor tweaking" I could do on Flash? I ask because we just changed the shapes and and the 9 slice scale grid, is there anything else you could setup for a skin?
David

Getting the text position (inside or outside a box?)

Hi all,
I'm using plain Ruby to access the content of an PDF file. This by using yob's PDF Reader from GitHub.
Now I've come a long way, but still have one question remaining! How to get the position of a text object (the box of this object)?
I've read the PDF reference, it tells me all sorts of stuff about Text Space, Glyph space and User Space... As English is not my native language it's a lot to take in... I currently do have a CTM, a Text Matrix and a Text Render Matrix. I also have all the boxes on the page (media, trim, crop etc.)
For a Image object, I use the CTM e and f values as x and y. This works perfectly, but when it comes to text, I seem to miss something..
Example:
CTM: Matrix[
[1, 0, 0],
[0, -1, 0],
[-0.0, 640.346, 1]
Text matrix => Matrix[
[10.0, 0.0, 0],
[0.0, 10.0, 0],
[2062769.1732, 42.6732, 1]
] == Needed to convert from text space to User/device space!
Trm: Matrix[
   [1000.0, 0.0, 0.0],
   [0.0, -10.0, 0.0],
   [2062769.1732, 597.6728, 1.0]
I can count lines, and calc a displacement by multipling this number by the Font size (12pt per example) but how do I get the the box of te text_object? If I've the box, I can make sure it fits in a box or not....
Please help with anything I might be doing wrong, or even better if you can help me find the text position!

So if I understand correctly:
the CTM x and y are the starting point of my textbox (lower left corner)
What does the text matrix do then?
Example 2:
CTM: Matrix[
[1, 0, 0],
[0, -1, 0],
[-0.0, 640.346, 1]
The last of each col (0,0,1) is ignored, I know :-)
text matrix:
Matrix text: Matrix[
[24, 0, 0],
[0, 24, 0],
[50.7401, 572.1733, 1]
So my x for the lower left here is 50.7401 and my y is 572.1733, right?
And then we need to move the x position the number of char widths in a text, right?
And when we move the cursor to the next line, we must use the text line matrix?

How do you create a border around text?

how do you create a border around text?

Can you be a little more specific about what you are trying to do and the application that you want to use? The methods can vary depending on the application and who published it. For instance, if you're using Final Cut Pro here is a discussion describing how the border can be created.
https://discussions.apple.com/thread/1470384?start=15&tstart=0
If you are using an Apple branded application you can also post in the specific forums for those applications in order to help ensure a complete response.
https://discussions.apple.com/community/ilife
https://discussions.apple.com/community/iwork
https://discussions.apple.com/community/professional_applications

Border FX texting problem (2nd post)

Firstly, both Aperture and Border FX are the latest versions.
I keep experimenting to find a way of positioning text on an image. The position of the text is not the same after saving. Any ideas as to what setting I should be using. This is most frustrating.
See screen captures below; note red text within Border FX in the `1st image, and then when it is saved (2nd image)

This is the Final Cut Studio forum.
Click here for the Aperture forum.

Cell border and text buttons.

Dear members:
I am a beginner and have just started using Dreamweaver.
After a few attempts and some reading I decided to post a message
with questions on a couple of problems I haven't been able to find
answers for.
The first one relates to table cell formating. I have tried
to set border properties for individual table cells but haven't
been able to. I would like to be able to set individual border
thickness and border color values for different cells in a table.
How is this done ? I have selected the cells I wish to format but
the property window shows color but not border thickness value. Any
ideas ?
The second issue relates to text rollover buttons. I wish to
create simple navigational buttons in a web site created from text
placed in table cells. The text should be created as one color
(gray) for the "up" state and then change to a different color as
the state changes to "over" and "down". I have looked at Flash
buttons but they are not exactly what I want and don't offer the
option I am looking for. Flash text also doesn't allow me to set
behaviors as most behaviors appear grayed and non-selectable. How
can I create rollover buttons from simple text that changes color
and style (normal, bold, italic) with state changes ?
Any help will be very appreciated. I apologize if these
questions seem basic but I am beginning to work with Dreamweaver.
Thank you in advance,
Joseph Chamberlain

These may help -
http://www.projectseven.com/tutorials/css/qdmacfly/index.htm
http://www.macromedia.com/devnet/mx/dreamweaver/css.html
http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"FreakyJesus" <[email protected]> wrote in
message
news:ec1dq8$gjo$[email protected]..
> The answer to your table cell borders question is CSS.
Do you know much
> about
> that? It will allow you to define all the cell styles
you want, and then
> you
> apply those styles to the cells in question.
> Your text question can be done a few ways, but again CSS
is the answer. If
> you
> don't know anything at all about it - go look - you'll
be using it again
> and
> again so it's well worth your time.
> If you know about css and need help with the specifics,
then post back and
> we
> can try some stuff out.
>
> Andy
>

Border Fx text positioning

Similar Messages

Maybe you are looking for