Border lines of windows shows correctly in preview but wrong in printing

Hello experts,
I am currently facing a problem here. When I print preview my sapscript form all
the alignments are correct but when we try to print it the lines of the 3 windows below is
not being displayed. I have 3 windows at the lower part of my page namely MVTXT, LLCOR AND
LRCOR. In preview, they are being displayed as(assume this is the whole page):
           KOPF             *
           MAIN             *
     Movement type:         *
LLCOR      |   LRCOR       *
            |               *
            |               *
But when we print it below is the display:
           KOPF             *
           MAIN             *
     Movement type:         *
LLCOR          LRCOR       *
Again, thank you guys and take care!
Message was edited by: viraylab

HI Viray,
Change the size of the window by selecting the Page Windows button inside SE71 transaction under you form and there in the Bottom of the window you get dimensions for each Window you double clicked.
Here in the Bottom you change the dimensions.
Thanks & Regards,
YJR.

Similar Messages

Artwork doesn't print when printing cd insert, it shows on the preview but doesn't print?

Hi, after downloading the latest version of Itunes, the artwork no longer prints on the cd insert? It shows on the preview, but doesn't print on the insert? It worked fine before and the printer is working fine, it prints color photos and artwork, no problem?

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.

# Question
It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.
Also in the '''Properties''' window of Windows Explorer I '''no longer have the Details tab''', so I can't update my mp3 files with Artist, Album, Genre, etc. But the details tab does show up when I access it thru Windows Explorer.
I ran the AVG rescue disc an no viruses found. Now on '''FF3.6.15''' '''RealPlayer''' shows when I right click but then '''immediately disappears and an icon appears in the System Tray''', but as soon '''as I hover my mouse over it it disappears'''.
Does anyone have any ideas or suggestions?
How can I get this fixed? I have time-sensitive mp3s that I won't have access to anymore if I don't get this resolved in a hurry. (no pressure on you, I'm the one that's stressed about this) Can you help? Thanks so much for responding to this '''inquiry.''''''bold text'''

See:
*https://support.mozilla.com/kb/Downloads+window
*Tools > Options > Privacy > Firefox will: "Use custom settings for history" > "Remember download history"

Standard text displayed correctly in print preview but not in print

Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa Aggarwal

Hi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby

Installing the free 30 day trial of Adobe Acrobat XI Pro. Stuck at the 'Download Completed' window, showing it's complete, but another window doesn't come up and the program isn't showing up anywhere either...?

Installing the free 30 day trial of Adobe Acrobat XI Pro. Stuck at the 'Download Completed' window, showing it's complete, but another window doesn't come up and the program isn't showing up anywhere either...?

Hi Tammy Havlik,
Try Downloading the Installer Package from this Link ( Download Acrobat products | Standard, Pro | XI, X) and Let me know if this helps.
Regards,
Rahul

Captivate 3 shows skin in preview but not when I run after published?

Captivate 3 shows skin in preview but not when I run after published. It shows it is included, what's up?

Is the Skin externalised? If so, perhaps Flash Global Security is interfering:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
You could also try NOT externalising the skin.

I want to use some Greek letters. I found the font "Symbols" which shows what I want but I cannot print in it. I can print in all the other fonts.

I want to use some Greek letters. I found the font "Symbols" which shows what I want but I cannot print in it. I can print in all the other fonts. What can I do?

To type Greek, go to system preferences/language & text/input sources and check the box for Greek, plus the box for Show Input Menu in Menu Bar, plus the box for Keyboard Viewer. The select Greek from the "flag" menu at the top right of the screen and type. Select Keyboard Viewer from the same menu to see which key does what. Do not worry about the font, that is taken care of automatically.

My iPad shows my Photosmart 7510 but won't print. Wireless commands from my computer to printer work

My iPad shows my Photosmart 7510 but won't print. I've disconnected and reconnected printer, turned iPad off and on. My computer communicates well wirelessly with the printer. Troubleshoot further?

I would try a hard reset on the iPad.
To do so, hold both the home button and sleep button down at the same time.
Keep holding them until the device restarts and you see the Apple logo.
Once you see the Apple logo, you can go ahead and release the buttons.
Once the iPad is booted back up, try to print to your 7510 again.
Let know if that helps resolve your issue or not.
Best of luck,
Kyle

Correct preview, but wrong print out.

Hi all,
I created a new page format of size 255MMX205MM .Also created a format type with the same name.Copied the device type SAPWIN and added the new format created .Now the smartform that i created(using the new page) is all right in the print preview but the printer is printing only the A4 area (ie. skipping alot of space in the next page). What could be the reason ?The printer i am using is dot matrix(Lipi TallyGENICOM 6312 ). Eagerly waiting for respone. Thanx in advance.

Hi,
With windows device types like SAPWIN and a custom pageformat like e.g. Zxxxxx, there is no command sent to the Windows to
select the page format, so the default Windows page format is used.
As a solution, you can set a default page format in Windows. In thiscase, then you must set up the Windows default page format to match the paper size you require as described in the SAP Note 163136.
Regards,
Aidan

"printer installer" window shows up at every boot after installing printer

After installing successfully a Samsung printer, everytime I boot Mountain Lion there is a "printer installer" window shows up.
Any way to get rid of this?
Regards,
Vincent

I've come across someone who had this before - they'd forgotten to take the installer disc out of the optical drive so it ran its installer at every boot. Any chance that's it?

Logo appearing in print preview but not in print for Xerox Workcentre M118

Hello experts,
I am not able to print logo(in .bmp) format in Xerox Workcentre M118 PCL 6 printer. It is displaying accurately in print preview. While taking print out only grey background is coming, no trace of logo. Can anyone suggest, what are the print related settings needed in SPAD or any other transaction needed to print graphics. The logo is coming accurately if it is stored in pdf and then printed.
Regards,
Debopriyo

hi,
To print logos using the SMARTFORMS, we need to first upload that logo onto the application server. The steps to upload the logo onto the application server are as follows:
1. Go to transaction SE78
2. Select the desired graphic in the tree (for example, BMAP)
3. Choose GRAPHIC --> IMPORT
4. Enter the name of the graph and the description
5. Select the type of the image (black/white or color)
Now the logo is uploaded onto the application server. To print this logo using the SMARTFORM, create a graphic node in the window and enter the name of the image you had just uploaded. Your logo should now print.
Refer the following links.
http://www.sapmaterial.com/smartform_example.html
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1255081,00.html
Below is the link for print related problems.
http://www.geocities.com/SiliconValley/Grid/4858/sap/Basis/printprobs_solutions.htm

In Smartform able to see the logo in print preview but logo not printing.

Hi All,
In Smart form there is a logo which i am able to see through Print Preview but when trying to print that form the logo is not printing. What might be the reason for this problem, please suggest a solution for this problem.
Regards,
Siva.

Hi,
I am able to see the logo for all other smart forms i have developed using the same printer. But the problem is only with this Form. If the printer settings are not correct i should not be able to get the output for any form using that printer.
Regards,
Siva.

PDF shows multiply-transparent jpgs, but does not print them

Hi all, i have to print some store vouchers with different logos, but too bad some of them are jpgs. I've set them to "multiply" with 60% opacity, and when I export to PDF, it actually shows pages as it should, but when I print them, these logos magically don't appear. What the heck am I failing? Attached screens of my working profile. Thanks!

While I think your boss is making a big mistake and sacrificing quality in the output, he is the boss. Make a new PDF preset -- start with X-1a, then change the standard to None and check the box to simulate overprint. Does that work? Do you see thin white lines (stitching) around transparent areas? That's a major problem on screen and with digital printing from flattened PDFs.

Why are line graphics not showing up in Preview Mode when they show in Normal view mode?

I am using CS4, I've used InDesign for 4 years. I can not figure out why this is happening...
From the Tools panel, I am using the line and circle tools. Drawing lines (arrows) and circles on my document, with a stroke weight of 1. The lines are the top item on my page, the last thing I draw. I draw lines that would go over not only other graphics, but over text as well.
Problem is that they only show up in Normal view, not Preview view. Hence, I don't think they will show up on the final document.
I've used these tools often, and the lines not showing is a new problem. Can anyone shed some light on why this might be happening?
Thanks, Louise

I looked and yes "nonprinting" was ticked in the Attributes panel. THANK YOU :-)
I knew there had to be a simple solution and I was so frustrated it was eluding me.
Thanks again.

PDF file not showing correctly in Preview or other apps

Hi,
I've trying to find an answer to my question for some time now on the internet, but couldn't find it anywhere. When I open a pdf file from someone who created it using Windows diagrams that are supposed to be Matrices are not showing properly. Most probably the matrices were created using the equation builder in MOffice.
<-- this is supposed to be a matrix
There is also a problem with showing symbols like subscripted or superscripted letters (Arrows represent superscripted or subscripted letters, either up or down):
And for some reason, when I try to quicklook the file, some pages are displayed incorrectly - only showing a quarter of the page:
Any help on this? Is there some sort of an update to solve this problem, or should I download additional fonts??
I am using a Macbook Alu from 2008 with OS X Maverick installed - all latest updates are installed.. (However the same problem appeared when using an iPad)
Thanks a lot i advance!

Hi Carolyn,
I looked at your file and it seems the problem is with the resolution. The design is great but the resolution was too low.
Fortunately your Apple Smart Object was high resolution so I was able to increase the resolution of the file as it is. You will need to replace the Bar Code and possibly the little flower on the back cover with high res versions.
In the future you need to start with the document being sized right and the resolution at 300 ppi. Make sure your graphics are high resolution from the start as well. You can't regain resolution that was left out, although using High Resolution Smart Objects can give you the the latitude you need to size back up.
After I sent the file I looked closely at the font. The one font you used does have zaggies but it's supposed to. Bradley Hand ITC TT is kind of a rough font around the edges by design. If this is what seems to be the problem, you will need to change to another font. Still, the file needed to be higher resolution.
I sent one back to you in high res. All you need to do is replace the bar code and the little flower with high res version. The apple graphic smart object was high enough.
Linda

Border lines of windows shows correctly in preview but wrong in printing

Similar Messages

Maybe you are looking for