Border on some fields prints double

I am running into a problem in PLD on a PO Layout that I customized. On the header fields I have a right border. On some of the fields the border is doubled even though the fields do not overlap and as far as I can tell all the settings are correct. At times I remove the border and frame from a field that is printing double, and then it prints single even though there should not be a border now. It seems to randomly affect different fields. If I fix one by removing the border then the double border seems to move to a different field? The only thing out of the ordinary is that I have the colors set so that the background is all black (0,0,0), and the frame and text are white (255, 255, 255). There is no Highlight set, the box is not checked.
Does anyone else have this problem or know a solution? (this is SAP 2007 A, SP 00 , PL 15).
Thanks,
Don

Don,
First thing first, you have to upgrade your PL soon since the lowest supported 2007A PL is 30. Current PL is 49 if not 50 already.
As for the border, it will be too hard to set them correctly if your background is all black. Try to change background first.
Thanks,
Gordon

Similar Messages

R12-Check Printing-Some fields are not shown in Arabic

Hi, we have a unique problem while printing the checks some fields are printed correctly in Arabic and some are printed in english, once in english are payee name, payee address, invoice number . am i missing something here, any help is appreciated.
Regards
Santy

There are couple of ways to achieve this,
1) - Create 2 variants, 1 variant for CFO with all the fields & 2nd variant with only relevant fields. Then use the authorization concept, where basis can restrict the access / execution of the report with specific variants.
From the basis view, they create role & assign this variants in one of the object ( not sure). Basis assistance required
2) - When developing report, write the validation for the respective fields such as maintain Customize table in which maintain userID's & fields which they can access. Display only those fields to the userID who executes this report. It should check this customize table for this UserID & only those fields listed should get displayed. ( for all the fields, instead maintaining each field, you can enter "ALL",
Eg: UserID -
Fields
CFO -
ALL ( report should display all the fields)
NONCFO-------Field1 | Field2 | Field3 | Field4 | Field5 ( only these fields should get displayed)
Note: In Customize table either you can maintain with User ID or Role. It will be more convinient in future as well.
Regards,
Reazuddin MD

Some fields in form not printing but do print when printing fields only

Hope that someone can help with this. I have filled in some forms (supplied by a third party) and when I print these forms the content of some fields are printed, and some are not. I have found out that if I cut a field's content, then paste into the same field, then tab out of the field, then the field content will be printed. I have about 20 of these forms with a lot of fields, so I would prefer another solution ;-)
The strange thing is, when I choose to print fields only (I have Dutch version of Acrobat, not sure if it has that exact name in English) ALL fields are printed correctly!
I have scanned the forums and tried several printing options, including printing as image.
I have tried using Acrobat 8.1.6 Standard on Windows (at the office) and the latest Acrobat Reader on both Ubuntu Linux and Mac OSX (at home) with the same results.
Any suggestions?
thanks
Paul

The first time I chatted with iTunes support they ended it by giving me 2 free song downloads. No offense, but I don't want to download anything but what I've already paid for. The second person to help me through email support gave me 6 free song downloads. This is frustrating because neither can offer a solution to why iTunes says 6 of this album's tracks are downloaded to my computer and won't allow me to redownload them... BUT on another device I can redownload the album in its entirety. That sounds like a very technical question that I just don't think they train their support staff to handle.
So, does anyone know how I can get this computer to UNRECOGNIZE these songs as downloaded, thus allowing me to download the full album to this computer?!

Hiding the some fields in print PDF adobe form

Hi all
Im working on travel expense form in webdynpro ABAP.I have a requirement of hiding some field in the adobe form.Can anyone tell me how to proceed ?
Thanks and Regards
Reeha

Hi Reeha,
In case you need to use any script you may prefer formCalc script, which is very easy to use. You can use any script out of the two as per your understanding and comfort level.
If you require more technical information about FormCalc, refer to the Adobe XML Forms Architecture (XFA) Specification, version 2.4, available from:
[http://partners.adobe.com/public/developer/xml/index_arch.html.]
and
[http://help.adobe.com/en_US/livecycle/es/FormCalc.pdf]
Hope this helps you
Regards,
Gaurav Bhardwaj

Can a PDF be made to by default print with "flip on short edge" set if printed double-sided?

I'm producing a 4-side, 1-sheet PDF booklet download. Our main target audience is professionals (not necessarily tech-profecient) who will download it and print it on regular office printers. Most modern office printers can print double-sided, so we expect people to print it on one sheet, fold it in the middle, and use it like that.
This gives us a problem: the default setting for double-sided printing in Adobe Reader and Adobe Acrobat appears to be to flip on the long edge. For a folded booklet, this results in the centre pages printing upside down. I, personally, know how to change this setting - but our audience won't, and we've found that even within our own tightly controlled office network, the options for changing this setting are in different places for different people - so giving everyone who downloads it instructions on how to change the setting will be difficult. I'm tech profecient enough to confidently poke around in the various printer settings dialogs until I find it, but most of our audience won't be, and many people will get it wrong even with basic guidance telling them what to look for.
The "Flip on long edge" default appears to be based on the assumption that printed documents are to be held and read portrait, regardless of how they are printed. Is there any way to set a PDF to instruct Adobe Reader etc that this document is to be read landscape (or, folded), so that it can know to flip on the short edge by default for this particular document?
I'm not fussy about what software I use to create or edit the PDF. I'm using InDesign at the moment but will happily use Acrobat, or even hack the code of the PDF with a text editor, if that's what makes it work. I'm asking on the Adobe Reader board since it's not so much a question of how to set this, as whether there is anything in Adobe Reader that is actually capable of interpreting and acting on such information from a PDF.
Another type of answer that could solve my problem is, is there some universal way to set "Flip on short edge" where the steps the user follows are the same regardless of whether they are using Reader or Acrobat, PC or Mac, and regardless of specific printer drivers or printer software?

You should post here for Apple to get your feedback:
http://www.apple.com/feedback/

Downloading ALV to EXCEL - in some fields the last character is missing ...

Hi,
I am experiencing this kind of problem when downloading ALV report into Excel :-
"You are downloading an ALV result to an EXCEL file. In some fields the last character is missing."
For example, if MATNR is 0000234567 in display but after downloading to excel it becomes only 23456.
I found another related forum thread : Pronlem while downloading ALV grid to excel
I tried the suggested method to apply OSS note 1075315. However, the note cannot be implemented in the system. I am working in a ECC6 environment (SAP version 700, 701).
Kindly please help me if you came across the similar kind of issue. Thanks much.

Hi gkGoh8 ,
The link thread that you just gave already provided the answer, in your field catalog you need to activate field lzero.
1. Check FM : REUSE_ALV_GRID_DISPLAY
2. Import Parameter tab :IT_FIELDCAT
3. Double click SLIS_T_FIELDCAT_ALV
4. On type group SLIS, check line 93
Regards,
JQC

Issue in trusted flat file recon for usr field having double data type

Hi
I have a field in usr schema which is of double data type. Now when i am doing gtc trusted flat file recon the user is getting created and all fields are getting populated but field having double data type doesn't get populated.
I have tried in other way also. After creating the user, I am trying to update that field (which is of double data type) via gtc trusted flat file update but in that case no recon event is getting generated.
Enviroment : OIM 11.1.1.5.0
I am stuck. Please help.

Somebody PLEASE some idea!!!
Any thought on the same would be really appreciated.
Thanks in advance.

Text in fields prints faintly, but everything else in the document prints fine

I am using Adobe Acrobat 8 Professional on a Mac. I am using a black and white laser printer.
In my work, I fill out PDF forms prepared by the federal government.
I can't modify the forms, because they are secure.
Filled-in text fields print so faintly (i.e., too light, not dark) that they are hard to read when printed. They don't look that great on the computer screen, either.
The form itself prints out excellently: nice and dark; easy to read.
Text entered using the typewriter tool prints out excellently, also.
Acrobat does not seem to allow the font in the text fields to be changed. It is some kind of Courier, and it never changes.
How can I get darker printouts from my text field entries?

Yes, that is not the best font choice. It's Courier New and this is a common complaint with this font. That particular form is not secured, but it is Reader-enabled. It is an XFA form, so it can be modified with LiveCycle Designer, which unfortunately for you does not come with the Mac version of Acrobat. If you want to go to the trouble of modifying such forms, you could do so on a Windows machine that has Acrobat Pro/LiveCycle Designer installed.

Network printer no longer printing double sided

I've recently set up my airport extreme (AE) base station in bridge mode with my Verizon fios wireless router. I also have an airport express connected to a Brother laser printer via USB. The AE is getting ip addresses from the Verizon router, and I have not yet turned off any wireless signals, so both routers are sending out a signal. In this configuration, I can still send print jobs to my laser printer fine, but the printer no longer prints double sided even when the print settings are set to do so. I've also noticed that I can no longer see the printer status when I open up the specific printer app. for that printer. All of this was possible over my wireless network when I was running a simple cable modem to the AE and the AE was the only router in the house. Could this problem be caused by having two wireless antennas running at the same time or does this sound like another problem?

To try... set a different printer as the default, and have the network printer as non-default selection
Some other reading
Printer is Crash Problem http://forums.adobe.com/thread/720864?tstart=0

Some fields in BAPI_GOODSMVT_CREATE

Hi Abapers,
I am usiing BAPI_GOODSMVT_CREATE for the MIGO transaction for creating material document.
With movement type '101' and MVT_IND = 'B'.
In this am not able to find out some fields like ' 1. Activate Print (XNAPR) , 2.Quantity in delivery note (LSMNG) , 3. unit of measure (LSMEH).
Please let me know how to get these field.
Thanks & Regards,
Simha S

hi shakya
check this thread.
Re: About BAPI_GOODSMVT_CREATE
Set parameter is used to set the values of screenfields like checkboxes,
when u set it as X means u r ticking a checkbox
Anyways i dont think this has anything to do with ur requirement. I guess so!!
кu03B1ятu03B9к
Edited by: kartik tarla on Jan 22, 2009 9:31 AM
Edited by: kartik tarla on Jan 22, 2009 9:34 AM

Unbale to get complete output as some field are missing in z t-code.

Respected Guru's,
i am tring to get output from a customized t-code.
While executing the report in background, i mention customized format as the exsisting format does not match.
But i am the unbale to get complete output as some field are missing.
Please help me, i have tried change the no of rows and coloums, but no effect.
Regards,
Daya

Hi,
Please try with printer settings and used different printer formats.
Actully this problem because of printers configration which is used for backgound reports.
Regards,
Ravi

At New will made some fields *********

Hi,
by using At New in internal table some fields are showing *********
can any one please hep to solve
Regards
Nausal

Hi,
Yes..in AT NEW /AT END all the fields except the first one(on which you have applied AT NEW etc.) will not be accisible within the loop.
TO access the variable either use the approach posted in eralier post...use of flag variable or I think you can access the variable in "ON CHANGE OF".
In all these loops,
1.your intrenal table should be sort on the fileds on which this loop will be applied
2. The fileds SHOULD be the first field in the internal table.
3.All the other fields except this one wont be accesible with in the loop.
OR
Capture the value of the internal table into another WA before AT ....... and use the wa second to access these values.
PS: if you want to calculate the sum of any int then this can be done with in the loop using the SUM...and printing the same outside the loop.
Hope this must help you a lot.
Pooja
Edited by: Pooja Gupta on Oct 23, 2009 6:32 AM
Edited by: Pooja Gupta on Oct 23, 2009 6:36 AM

Printing double sided by page count

I need to print a large amount of pdf files. Within each file, contains statements for our clients. The boss has requested that these be printed front and back. The problem is that client’s statements are different page amounts some have 2 pages, other have 3,4,5,6, or even 7 pages. If I choose to print double sided and there is a client with 3 pages, the next client's first page will print on the back of my first client’s second page. If my statements are numbered 1of2, 1of3, 2of3, 3of3 etc.. Is there a script or way to have adobe print the way I am requesting? I have Adobe Reader X on Windows 7 or Windows XP. Thanks in Advance!!

Not quite...Let me give you an example. I have 100 companies, so I have 100 files. Within each company, each employee has a statement that I need to print. When I open up the company file (File 1) there could be any number of employees. And each employee has a statement however the there are multiple statements/employees within company/file 1. So "employee "A" has a 3 page statement that has a page count 1of3, 2of3, and 3of3. ( i will eventually mail his statement to him and i want to mail him 2 pages the first page will be front and back, page 1of3 and 2of3, the second page will be page 3of3 on the front and blank on the back because there is nothing else to his statement) If I print the entire file front/back the next "employee B" first page will end up on my "employee A's" last page. I guess i want Adobe to know once its gets to a page 3of3 or 4of4 or 5of 5 (the end of a employee's statement) etc.... that it should in a sense start a new print job. I hope that makes sense..and again thanks in advance your help is greatly apprectiated.

I need a tutorial on printing double sided business cards through adobe illustrator

does anyone have any suggestions on where to find a tutorial on printing double sided business cards through adobe illustrator?

First of all double sided printing set-up from Illustrator is something that is very specific to the printer you are using, so you'd need to refer to your printer's user documentation to review the correct settings. Having said that the steps you take are very similar for all printers.
Here are some steps that might be of help:
The easiest way to this is probably to place the front and back of the business cards on two separate artboards, for example Artboard 1 for the front of the cards and Artboard 2 for the back of the cards. Use the Artboards panel (Window > Artobards) add a second artboard of you've not yet got front and back on separate sheets.
In the File > Print dialog box, in the General section ensure that 'All' Artboards are selected or define the Artboards Range to print if you have more than two artboards in your Illustrator file.
You might also want to enable Trim Marks (Marks and Bleed section) so you can easily trim the cards after printing.
You can access your printer specific settings, such as duplex or double sided printing by clicking 'Setup...' at the bottom of the Print dialog box in Illustrator.
Mostly you'll find an option you can enable called 'Double Sided' or 'Two Sided'.
There will also be a second option for either Long Edge or Short Edge binding. For a portrait artboard you'd select Long-edge, for a landscape artboard you'd select Short Edge.
Once you've set the Setup specific to your printer click OK and you'll return to the Illustrator Print dialog box, from where you can now print.
You might need to tweak the position of your 'back' a little if your printer doesn't print perfectly registered.
Cari

HP Deskjet 2540 Not Printing Double Sided Correctly

I'm hoping someone can help me!
I just bought a brand new HP Deskjet 2540 as my old HP Printer got thrown in the trash for blinking it's lights at me too much....
So this new one has been working fine for normal printing, but when I try to print double sided, I follow the instructions and manually move the pages back in the tray as indicated, but it keeps skipping a page. So it prints the first side of the first page great, then it leaves the 2nd side of the first page blank, and then the rest of the pages are perfect (printed on both sides in the right order). This has happened exactly the same numerous times now.
Please help!

Hi @katie20 , welcome to the community
I read about the printing double sided troubles you are having with your Deskjet 2540 on Windows 7. To me, it seems like there could be a driver problem or a software problem with the program you're printing from. Here are some steps for you to do to get started.
1. Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please send me a screen shot of the results or write me back with the details.
2. Print double sided pages from a different program, let me know the outcome and which programs you have tested.
Also let me know how you have the printer connected (USB, Wireless, Ethernet)
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Border on some fields prints double

Similar Messages

Maybe you are looking for