Borderless print with Canon MP610 impossible ?

Hi all,
I've just bought the new Canon MP610, but can't find how to print without borders.
For instance, in Safari or any other application, when I choose print, then the "borderless printing" menu, the cursor is greyed. So impossible to print borderless.
Any idea please ? Thanks !

You need to download the software called "Easy Photo Print" from the Canon web site.
I just bought the Canon MP610 also and I found out about this software while I was doing my research for the printer. At the Canon web site just go to where you would go to download the drivers for the MP610 and thats where you will find the software for download!

Similar Messages

  • Borderless printing with hp pro 8500A is not available

    selection for borderless printing with hp pro 8500A is not available.  How can I get the selection to turn on in order to print an envelope?  As is, I have to print the return address well inside the margins.  Thanks for your help.

    Hi folks
    Have you followed the troubleshooting in the link below?
    Troubleshooting print quality issues
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Borderless printing with iPhoto/Canon iP8600?

    Does anyone know if it is possible to print borderless photos with iPhoto? I have a new Canon iP8600 that features borderless printing, but I've not been able to get it to work with iPhoto. The paper options for borderless printing are there, but the borderless popup dialog brings up a single greyed out option.
    Any ideas from someone who has this printer (or the 8500)?

    The post must have expired. Here's a step by step process that works fine with my Canon i850 and Epson R200. It's pretty generic.
    <blockquote?<i>Steps for printing 4 x 6 prints from iPhoto:
    1 - crop the photo to 4 x 6 beforehand in iPhoto.
    2 - in Page Setup select your printer, proper page orientation and paper size as 4x6 or 4x6 borderless
    3 - click once on the picture you want to print to make sure it's selected.
    4 - now click on the Print button in iPhoto.
    5 - in the iPhoto print window, select your printer again, select Style = "Standard Prints", Size= 4x6 and click on One photo per page.
    6 - click on the Print button.</block

  • Borderless printing with Adobe reader or acrobat and HP Officejet Pro 8100

    Hello,
    When printing borderless with my Pro 8100 the printed pdf moves about 2mm to te left on the paper. (White vertical strip on the right side is the result and on the left side something is missing!).
    What causes the problem seems to be that the HP Pro 8100 printsoftware makes the A4-format a littlebit larger (214,55 x 300,91) than an actual A4-format (210,00 x 297,00) when you choose borderless printing.
    Therefore, I suppose that the pdf shoud be centered before printing. Adobe reader doesn't seem to have the possiblity to center the page however.
    Any tips?

    The borderless printing option is intended to print photo's on photo paper.  When printing borderless the print is slightly oversized to eliminate (or reduce) to chance for white edges due to media skey.  Depending on your operating system you may have a setting in the Advanced tab of the driver for Overspray, set this to minimum and see if it helps.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Anybody has any problems with installing and printing with canon lbp6650dn?

    hi,
    i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
    computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
    thanks!

    Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
    You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
    Message was edited by: First Magus

  • Difficulty  Printing Borderless Prints with Epson C84

    When I had an iMac G3 with OS 9.2 and used the Epson menu for printing, I had no difficulty printing 4x6 inch borderless prints (since that is one of the options on the Epson Menu). But now that I am forced to use the OS 10 printing menu, even when I identify the printer as an Epson C84, crop the photos to fit a 4x6 page and show "0" margins on all sides when selecting 4x6 as paper size, using either iPhoto or Photoshop Elements 3.0, the prints come out with a small white border on all four sides. The Apple Menu with Epson as the chosen printer does not give me an option that says "4 x 6 borderless" when choosing the paper size. Is there something I need to set differently in order to get borderless prints?
    hk Jones

    I also had a problem finding the "Borderless" option in the print dialogue. Here's what Epson Support told me to do -- It worked perfectly. I can now print borderless from either of the two macs sharing my Epson 1280.
    To correct the issue you are experiencing, we will perform a complete
    removal of the files and reinstall the driver.
    REMOVE FILES
    1. Double click on the MAC HARD DRIVE
    2. Double click on the LIBRARY folder
    3. Double click on the PRINTERS folder
    4. Drag the EPSON folder to the trash can
    NOTE If you receive an access denied error message, this indicates that
    you do not have root access. You will need to contact Apple for assistance
    on obtaining Root Access.
    1. Insert your 10.4 CD/DVD, double click on the CD/DVD icon on your
    desktop.
    2. Double click SYSTEM > INSTALLATION > PACKAGES > EPSON PRINTER
    DRIVERS.PKG
    Follow the prompts for the installation, restart your Mac when complete
    Please follow the steps below to install the resident driver for your
    printer in OS 10.4:
    1. Make sure that your printer is turned on and connected to your computer.
    2. Open your PRINTER SETUP UTILITY. This is found in HARD DRIVE,
    APPLICATIONS, UTILITIES directory
    3. If there are any entries for your printer click on them and hit the
    DELETE. Once they are all gone Click ADD, then MORE PRINTERS at the bottom
    of the printer browser.
    4. In the window that appears, select EPSON USB from the drop-down menu at
    the top, then highlight your printer when it appears under NAME , under
    PAGE SETUP select ALL, and then hit ADD.
    5. Quit out of the printer setup utility and try printing from any OS X
    application.
    To set up your printer for borderless printing in OS X please follow the
    steps below.
    After you have installed your printer driver for OS 10, you will need to do
    the following to add extra paper features such as borderless printing
    options:
    1. Go to Printer Setup Utility (found in HD > Applications > Utilities).
    Delete any existing references to the Epson printer from the list.
    2. Go to Add. Select Epson USB for a USB printer or Epson Firewire for a
    Firewire-connected printer.
    3. Highlight the printer name when it appears under Product. Under "Page
    setup" use the up-down arrows and select ALL.
    4. Click Add. The new printer options will now be added to the Printer
    list; you will see the printer name numerous times with different paper
    selections attached. (If you are unable to see the full description you
    will need to extend the name category.)
    5. Highlight the printer name/feature which you wish to use (For example,
    "Stylus Photo 2200 (Sheet feeder-Borderless)") and make it the default.
    Close Printer Setup Utility.
    6. Ensure Classic is not running. Open an OS X application and the file you
    wish to print.
    Setting up borderless prints in an OS X application (NOTE: not all
    applications will show these options)
    1. Click on FILE and PAGE SETUP. Ensure the settings below are adjusted:
    SETTINGS: PAGE ATTRIBUTES
    FORMAT FOR: EPSON STYLUS XXX XXX(BORDERLESS)
    PAPER SIZE: Whichever compatible paper size you wish to use
    (NOTE: borderless printing is not supported on custom paper sizes.)
    Click OK when done.
    2. Click on FILE and PRINT. Ensure the settings below are adjusted:
    PRINTER: Stylus XXX XXX(BORDERLESS)
    PRESETS: STANDARD
    Make any other adjustments needed (on COPIES and PAGES, PRINT SETTINGS,
    etc) and then click PRINT.

  • Borderless printing on canon 610 snow leopard?

    Whether I use canon's easy print or print from Photoshop or print from quark, I just don't seem to be able to coax borderless printing out of the 610. I printed my Xmas cards last year borderless; this year, zilch. What have I forgotten to do, do you think?

    used the 4350 driver and it worked

  • Problems print with Canon i850/ which driver?

    Ever since I installed Leopard, I have had printing problems with the color on my Canon i850 printer. Usually this has to do with magenta. If cleaned the printer, etc., and didn't have this problem in Tiger. Sometimes magenta will print in some colors, like purple, but sometimes it will print red, or will print red as green. I looked under System Preferences and there are two printers, an i850 and an i850 Gutenprint...which one should I be using? I am using the i850. Why is it that if I have red in a document, one place it may print and another it won't and the same red is selected? Also, where is the printer driver stored? Anyone also have any ideas on a great printer with Leopard? I do mostly black and white, but do color for pictures, not a huge amount, Xmas letters, etc. Just want a reliable, economical printer that the ink isn't outrageous, or is color laser the best? Any ideas or help will be appreciated! Thanks.

    The printing of red as green doesn't sound right. Green is made from cyan and yellow. Red is made from magenta and yellow. So to get green instead of red doesn't sound like a cartridge/print head is faulty, which is sometimes the case for these types of problems. It sounds like you either have a driver problem or a colour management issue.
    The i850 driver you are using is the Canon supplied version. Since this is giving you trouble, then I would try the Gutenprint version. If that still causes colour issues, then the colour management is most likely at fault. Did you upgrade from Tiger or do a fresh install?
    As for the driver location, have a look at ./Library/Printers/Canon/BJPrinters for the Canon driver. Will need to check the Gutenprint location (I'm at home on Tiger). Maybe someone else can chip in...
    Re the new printer, I can vouch for the Canon iP5300. It has a large black tank for text printing and separate C M Y K tanks for photos.
    Colour laser gives better text printing, but the photos aren't as good. Also, the purchase price is often more, although the toner cartridges have higher yields than ink. Have a look at this link
    http://www.macworld.com.au/reviews/view/colour-laser-printers-91

  • Problems with borderless printing with iPhoto '08 and HP Photosmart Printer

    I am trying to print borderless 4x6 photos on HP Photosmart C6250 (same as all HP C62xx Photosmart printers). I am using the HP 4x6 photo paper with the perforated tab. When I select the paper size, I specify Borderless 4x6 in/10 x15 cm (tab). According to the printer manual, the tab should be facing out. I have tried printing with tab out and the tab in. With tab in, it printed the picture leaving white space at the other end equal to length of tab. With tab out as printer specified, it left a white gap at beginning of photo (not as wide as tab) and printed the photo over the perforated tab.
    Anyone else figured out how to print using the 4x6 paper with tabs. I also tried printing from the HP software included with the printer and it has issues, too. So, it might be an HP problem, or is it maybe a Mac printing issue with this printer.
    Thanks for any help!
    Barbara

    Barbara:
    This is a shot in the dark but take a look at the following topic. It might just help. As they say, any port in a storm.
    Topic : iphoto won't print properly to HP photosmart
    It does seem like a bizarre solution however. Good luck.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Printing with Canon MF UFR II 4100 on windows pc shared

    In my office i have a PCs working on windows xp and in opne of the PC  there is a printer ( Canon MF UFR II 4100 ) attached via USB cable. As i give print command from my Mac book pro Laptop which has operating system Leopard (10.6.8) I am getting an error messge 50. Can any one guide me what to do ?

    The Canon UFR2 driver for Mac OS X cannot be used when the printer is shared by Windows. This driver needs to communicate directly with the printer. If you must have the printer connected to Windows then you could try this workaround.

  • Unable to print with Canon iR2018 after updating OsX Mavericks

    Hi,
    there's anybody who can help me in finding canon ir2018 drivers for osX Mavericks?

    Here is a link to the Canon UFR2 v10.2.0 driver that supports your iR2018 on OS X 10.9.
    Please note that when adding the network printer you must use the LPD protocol and select the correct printer model, which will be listed as "Canon iR2018". Do not select the iR2018 that shows UFR II in the model name as this will be for the older v2.43 driver which is not compatible with OS X 10.9.

  • Bluetooth printing to Canon MP610, Help!!!

    I have the Canon MP 610 printer and I have bought the bluetooth adaptor that was recommended from the Canon website. I can get my MacBook to recognize the printer but I cannot get it to connect. I get an error message that says there are no configurable services found on your device. This could be due to services not being enabled on the device, or the device might not have any services that need to be configured with the computer. See the docmentation that came with your device for more information. This helps me none because I have all my Canon instruction booklets and nothing tells me anything about how to get bluetooth printing, eventhough it has the capability. Anyone know how to fix this?

    Good morning everyone,
    I had experienced the same symptoms with a new MacBook Air and PIXMA iP100 printer via Bluetooth printing, (Air found the printer, created a new printer device, but failed to print, produced Error message 311), and found the following solution to be successful:
    Install the Canon non-CUPS driver version 7.3.2 (posted on Canon's support page for iP100 downloads), restart, and configure a new Bluetooth printer device from within the Print & Fax System Preferences selecting the "Canon IJ printer driver" - not the "Canon iP100 series" driver. It was as simple as that.
    Installing the non-CUPS 7.3.2 driver does not overwrite the 10.1.0 iP100 series CUPS driver. You will still be able to configure separate USB-wired and Bluetooth-enabled devices, using each of the drivers for the appropriate use.
    And, (as Steve Jobs might say), " just one more thing..."
    This solution worked with either very reasonably-priced Belkin or D-Link USB bluetooth adapters, so I suspect other generic Bluetooth adapters should suffice as well; there's no need to pay a premium price to obtain great results. Printing is also fast: it took 2 seconds to spool and 5 seconds to print a NeoOffice 1-page document with text and graphics. Not too shabby for the Bluetooth protocol.
    Hope this helps soothe some of that frustration out there...
    Best of luck& best regards,
    Marc

  • I got Snow leopard and now I cant print with Canon 4350d

    Canon 4350 printer problem?
    I get this message every time I try to print. I can scan and copy but not print. "Cannot communicate with the printer, or the printer is not supported, check the printer connection and add it again. Then, if the print dialog box has a printer info button, acquire the printer information: 10322"
    i tried to download the driver but it gives the same message.
    Please help.

    The XPS portion of the name is for Windows 7. It's not going to cause a problem, its just an identifier for Windows 7 as the driver is included with that OS.
    I have the MF4380dn on my desk and it shows the Printer Info button. So either your MF4350 model does not support this setting or the driver installation was not completed correctly. Since I don't have the same model to check I will suggest you look at removing the driver and installing the latest version, especially if you upgraded to Snow Leopard from Leopard with the UFR2 driver already installed.
    To remove the Canon UFR2 driver
    Open Print & Fax, select the MF4350 entry and press the minus button to remove the printer
    Open Finder and navigate to
    [Mac HD]/Library/Printers/Canon and delete the UFR2 folder
    Still in Finder, navigate to
    [Mac HD]/Library/LaunchAgents and delete the file jp.co.canon.UFR2.BG.plist
    Still in Finder, navigate to
    [Mac HD]/Library/Printers/PPDs/Contents/Resources and delete all the files showing CNTD***Z*2*.ppd.gz
    Where *** indicates a character string that represents the printer model, and *2* indicates a character string that represents the corresponding language, most likely US for your region.
    The last action is to open Activity Monitor and locate UFR2 Backgrounder. Select it and then select Force Quit.
    With all the above steps completed, restart your Mac and then download and install the UFR2 v2.24 driver.

  • Margin problem when printing with canon printer

    When I try to print a pages document on my canon pixma ip4500 printer (which they sold me at the apple store when i bought the laptop), the bottom margin does not appear. There is a space only about half an inch under the last line of text. Everything looks fine on the screen, but i cant get to print it with a bottom margin. and i don't even know how to set it manually...
    ps, the printer isnt set for a 8 1/2 by 14 sheet, it really is for a 8 1/2 by 11
    Help me please!

    That’s going to depend on what the document consists of. If it’s a single element such as a graphic or PDF, reduce the size. If it’s text, you can use a smaller point size, slightly reduce paragraph spacing, make a headline smaller, etc. If it’s text and graphic, reduce the size of the graphic(s) a little. But first, set your document margins to agree with your printer margins.
    Walt

  • Duplex printing with Canon LBP3300 on 10.5.4

    After struggle for over 24 hours, I finally managed to get my LBP3300 to print something for me.
    http://cweb.canon.jp/drv-upd/lasershot/captusbmacx.html
    This is the driver I use in case anyone wants it.
    However, the next question is that I CANNOT get LBP3300 to do duplex, which is the ultimate idea of buying this printer!
    I do see the item "Two-sided" under "Layout" in the printing option, but then it is in grey and I cant select it...
    Is there anyone who can help????
    Samson
    Message was edited by: Samson Lau

    I downloaded the manual that is located on the bottom of the page you have given the link to. Unfortunately it is written in Japanese (understandable given it was on the Canon Japan web site) but looking at the picture on p3.34 it shows the binding position of the paper. The image looks similar to the view in the UFR2 driver so you may have a menu heading of Finishing. If not, have a look at the picture on this page and see if you can match the view with the options you have in the driver.
    PaHu

Maybe you are looking for