Borderless printing in Lightroom 5--Mac Yosemite, Canon i9900. Selected 8.5x11 borderless media, but LR insists on printing with borders. Tried adjusting cell size and margins, but LR won't allow setting to zero.

LR won't allow me to adjust the margins below minimum values of about 0.25 in. Borderless printing and 8.5x11 borderless media are selected.
LR also won't allow me to increase the cell size. It seems to have a maximum of 8x10.68.
Aspect ratio of the image I'm trying to print is 8.5x11 so it should be a perfect fit.
When I print the same image in Photoshop, it prints borderless just fine on the same printer.
Mac, Yosemite, Canon i9900.

I have had some more trials to print without boarders. This time, it was inside of iPhoto. I had made a greeting card and wanted to print to a custom size. but without the ability to select the size as a boarder less size, I was unable to print directly. So instead, I had to save as a pdf > save pdf to iPhoto and then print the image as a photo (instead of a card).

Similar Messages

Trying to download iOS7 and it is saying i have a setting error what does that mean

trying to download iOS7 and it is saying i have a setting error what does that mean

Quite probably, or it may just be off and out of range of a network. In order to find a missing iOS device it has to have had the app enabled, and be on, not wiped, and able to connect to a network.

Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print. It did until quite recently . Now I get Filter failed and RastertoescpII when i try to print ( test sheets ok) . Have tried to to uninstall and reinstall but nothing. Any advice, please.

Question ?
Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
Print head test sheets/head cleaning etc ok .
Have tried to to uninstall and reinstall but nothing.
Any advice, please?.
ps
The printer deos not show up on Epsons site but i think I have the software from Apple.
Not an ideal situation.

Try a reset > OS X Mountain Lion: Reset the printing system

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Canon i9900 - no new drivers work to connect to Vista shared printer

I've spent 3 frustrating days trying to print to the Canon i9900 which is connected to my Vista PC and shared. On the Mac print queue it shows it is printing but on the Vista printer window, the status is SPOOLING and goes no further. Everything is correctly set on both sides, permissions, etc. I have tried every new updated driver from MAC and from Canon. The only print driver that does work is the Canon BJC-8500 but the document is 70% its regular size and the color is awful. I even installed the Snow Leopard update.
I guess that leaves me to continue printing thru Parallels/Vista for now until there's a better solution. I doubt it. Has anyone had any success sharing on a Windows network with this printer? Any help or ideas is greatly appreciated.

You have done some good research. One more thing - the driver from Canon was written to support direct USB printing only. You need a CUPS driver to use the various protocols available in the CUPS printing system in OS X. Look for CUPS drivers for your model here:
http://www.linux-foundation.org/en/OpenPrinting/macosx
http://www.printfab.net/
Try Gutenprint first, but your model might not be in there.

TS3899 Suddenly my font is enlarged when I print any emails. I've adjusted text size and that doesn't fix

Suddenly my font is enlarged when I print any emails. I've adjusted "text size" that doesn't fix, seems to be for display only ?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See http://kb.mozillazine.org/Zoom_text_of_web_pages
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r45
* Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

After I updated to yosemite my iMovie will not open. I have found the folders in the applications for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?

After I updated to yosemite my iMovie will not open. I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Set cell size and set print size as template change bottom as .25

IO need to set crop size i as 4x5/8x10...as standard

InDesign is a pretty complex application to learn on your own.
As soon as possible, acquire a good book on InDesign. My recommendation for beginners is Sandee Cohen's "InDesign QuickStart Guide." There are editions for different versions for InDesign. Less than $20.
InDesign CS5 for Macintosh and Windows: Visual QuickStart Guide

HT204350 I have an older Mac 07 that needs to be updated the apple store left our town, I've been trying to do free down load but not working any advice?

Hi, I have a older Mac early 07 I think, I'm trying to update it online since our apple store closed in our town. Can anyone advise me on what I would need to do since the maverick free upgrade didn't seem to work. Is there an earlier program that I missed? I had gone thru a couple of brain surgeries so I might of missed some things. Thanks

First, have you confirmed that your Mac is compatible with Mavericks? Here are the compatible models:
•     iMac (Mid 2007 or newer)
•     MacBook (Late 2008 Aluminum, or Early 2009 or newer)
•     MacBook Pro (Mid/Late 2007 or newer)
•     MacBook Air (Late 2008 or newer)
•     Mac mini (Early 2009 or newer)
•     Mac Pro (Early 2008 or newer)
•     Xserve (Early 2009)
so an early 2007 Mac of any type would not be compatible. If you'll run the System Profiler app (in the Applications/Utilties folder) and tell us what is says for the Model Identifier in the Hardware Overview, we can confirm what model of Mac you have.
Regards.

I'm trying to get the add-on Property Bee to work on Firefox on my Mac but can't seem to fix it, tried uninstalling/reinstalling FF and add-on, no joy,tips?.

Property Bee (property-bee.com) is an add-on that shows history of properties on Rightmove.co.uk which is extremely useful. However I can't get it to work whereas most of my friends use it and have it on Macs and PCs ranging from several years old to brand new. I'm using a Mac with the latest update and the most recent FF. Any suggestions would be massively appreciated as this add-on is so useful.

Thanks for the quick reply, I've tried all the suggestions on property-bee but unfortunately have had no success with them.

Touch ID "Failed" and won't allow set up

I have a 5s and a week ago the touch ID stopped working. If I go into the Settings, Touch ID & Passcode and turn on the "iphone unlock" (which I never turned off myself in the first place) it goes to the screen to set up the touch ID and then immediately moves to another screen that says: "Failed: Unable to complete Touch ID setup. Please go back and try again." I have updated to the latest OS 8.3 and still cannot turn it back on. Ideas?

try resetting all settings

HT1918 Hi, I have moved to another country and am trying to change my itunes account to my new country. But I have a small purchase from my previous itunes country and am unable to change the country setting, as I need to settle the outstanding amount.

I am trying to change my itunes account country as I have moved to another country. But the account is not letting me change as I have a small amount outstanding on my previous account, which I am trying to settle using my new credit card.
How can I settle the payment and change country?

Before you try that... have a look at Changing the Country here...
http://support.apple.com/kb/HT1311
If no joy... Use the above Link to Contact iTunes.

I am trying to vget help and support but stuck in an endless loop, being brought back to original support screen. I set yp a support account but you won't allow me to log into it. likewise unable to submit feedback' another endless loop

i already did!!!!!!!!!!!!!!!!!!!

Make sure that you do not block cookies.
* https://support.mozilla.com/kb/Cookies
* https://support.mozilla.com/kb/Enabling+and+disabling+cookies
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Had to rest the iPod. Now when I try to set up iMessage and face time it won't allow me as the address has already been used but on the same device. How do I fix tht

Had to reset the iPod and now I can't use the email that was on it before, it says the email is already being used. How do I fix tht?

Place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Borderless printing in Lightroom 5--Mac Yosemite, Canon i9900. Selected 8.5x11 borderless media, but LR insists on printing with borders. Tried adjusting cell size and margins, but LR won't allow setting to zero.

Similar Messages

Maybe you are looking for